Service manual Mercedes-Benz M176 Engine | Up to 2020 incl.

Pry off oil pan Engine 176, 177 in model 217, 222 Engine 177 in model 213
Remove/install right rear engine suspension lug Engine 176 in model 463 as of model year 2019
Remove/install catalytic converter Engine 133 in model 117, 156 except code 598 (Gasoline particulate filter (OPF) with sensor system) Engine 133 in model 176
Remove/install high-pressure pump Engine 133 in model 117, 156, 176
Drain/pour in coolant Engine 133 in model 117, 156, 176
Remove/install coolant lines ENGINE 133 in MODEL 117, 156, 176
Remove/install camshaft Hall sensor ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install radiator Engine 133 in model 117, 156, 176
Pry off oil pan Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install oil spray nozzles (pistons) Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 274 in model 172, 204, 205, 207, 212, 218, 253
Remove/install left cylinder head cover Engine 176 in model 463 as of model year 2019
Remove/install right cylinder head Engine 176 in model 463 as of model year 2019
Remove/install oil pan Engine 270 in model 117, 156, 176, 242, 246.2
Engine cooling system – check fluid level, adjust to correct level. Inspect 2.11.11 anticorrosion/antifreeze protection, adjust to correct concentration MODEL 203.004 /006 /016 /018 /035 /040 /042 /043 /045 /046 /061 /064 /065 /076 /081 /084 /204 /206 /216 /218 /235 /240 /242 /243 /245 /246 /261 /264 /265 /276 /281 /284 /706 /718 /730 /735 /740 /741 /742 /743 /745 /746 /747 /764 MODEL 211.004 /006 /007 /008 /016 /020 /022 /023 /024 /026 /028 /029 /041 /042 /052 /054 /056 /057 /061 /065 /070 /072 /076 /077 /080 /082 /083 /084 /087 /089 /090 /092 /206 /207 /208 /216 /220 /222 /223 /226 /241 /242 /252 /254 /256 /257 /261 /265 /270 /272 /276 /277 /280 /282 /283 /284 /287 /289 /290 /292 /606 /608 /616 /620 MODEL 414 MODEL 209.308 /316 /320 /341 /342 /343 /354 /356 /361 /365 /375 /376 /420 /441 /442 /454 /456 /461 /465 /475 /476 MODEL 215 (except 215.376 /379) MODEL 220 (except 220.176 /179) MODEL 230 with ENGINE 112, 113 MODEL 124, 129, 140, 168, 170, 202, 208, 210 MODEL 209 with ENGINE 156.9
Tightening specifications for cylinder head bolts Engine 176, 177, 178
Check low-temperature circuit cooling system for leaks Engine 133 in model 117, 156, 176
Inspect cooling system for leaks Engine 133 in model 117, 156, 176
Remove/install front cover on right cylinder head Engine 176 in model 217, 222
Remove/install oil pan Engine 176 in model 463 up to model year 2019
Remove/install right cylinder head cover Engine 176 in model 463 as of model year 2019
Check hydraulic valve clearance compensating elements ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install coolant pump Engine 270 in model 117, 156, 176, 242, 246.2
Notes on sealant path for oil pan Engine 112 (except 112.912/946) Engine 113.941/942/960/962/965/981/982/993 Engine 137.970, 275, 277, 279 Engine 176 in model 463 as of model year 2019 Engine 176 in model 463 up to …
Check connecting rod bolts Engine 176, 177, 178
Remove/install crankshaft Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 274 in model 172, 204, 207, 212, 218
Remove/install oil level check switch ENGINE 133 in MODEL 117, 156, 176
Fuse assignment of fuse and relay box in left engine compartment MODEL 221.176 with CODE (Z07) Top protection up to Model Year 8
Remove/install starter Engine 133 in model 117, 156, 176
Check all visible parts in engine compartment for damage and fluid loss Model 117, 156, 169, 176, 242, 245, 246
Remove/install air filter housing ENGINE 607 in MODEL 117, 156, 176, 246
Inspect cooling system for leaks Engine 176 in model 463 up to model year 2019 Engine 279, 642 in model 463
Remove/install coolant temperature sensor ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install right cylinder head cover Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install timing case cover Engine 133 in model 117, 156, 176
Remove/install charge air hoses ENGINE 651 in MODEL 117, 156, 176 ENGINE 651 in MODEL 246
Remove/install air intake pipe ENGINE 133 in MODEL 117, 156, 176
Align clamp between turbocharger and catalytic converter Engine 176 in model 167 Engine 176 in model 217, 222
Pry off oil pan Engine 176 in model 167 Engine 176 in model 463 as of model year 2019 Engine 177 in model 167 Engine 177 in model 463 as of model year 2019
Remove/install Lanchester balancer Engine 270.920 in model 117, 156, 176.04, 246.24
Remove/install right oxygen sensor downstream of catalytic converter Engine 176 in model 217, 222
Remove/install O2 sensor ENGINE 651 in MODEL 117, 156, 176, 246
Disconnect engine wiring harness for removal of engine Engine 176 in model 463 up to model year 2019 Engine 642.887 in model 463
Remove/install front cover on left cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install oil separator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install vacuum pump Model 117, 156, 176 with engine 133 Model 117, 156, 176, 242, 246.2 with engine 270
Remove/install charge air hoses ENGINE 607 in MODEL 117, 156, 176, 246
Drain/fill low-temperature circuit coolant Engine 176 in model 463 up to model year 2019 Engine 642 in model 463
Remove/install electronic bypass valve Engine 133 in model 117, 156, 176
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 217, 222 with engine 176
Remove/install additional engine radiator Engine 133 in model 117, 156, 176
Notes on sealant path for front cover to cylinder head xxx Engine 152.9, 157, 176, 177, 178, 276, 278
Remove/install left catalytic converter Engine 176 in model 217, 222
Check engine oil level with instrument cluster Engine 176 in model 463 up to model year 2019
Replace spark plugs Engine 133 in model 117, 156, 176
Remove/install low-temperature circuit radiator Engine 133 in model 117, 156, 176
Remove/install shield of rack-and-pinion steering MODEL 117, 156, 176, 246 with ENGINE 607
Remove/install guide bearing 24.03.2020 Engine Engine Engine Engine Engine Engine 133 in model 117, 156, 176 with transmission 724.0 270 in model 117, 156, 176, 242, 246 with transmission 724.0 607 in model 117, 156, 176, 246 with transmission 724.0 651 in model 117, 156, 176, 246 with transmission 724.0 651 in model 172, 204, 207, 212 with transmission 711.6 651 in model 205, 253 with transmission 716.7
Remove/install right catalytic converter Engine 176 in model 217, 222
Remove/install right oxygen sensor upstream of catalytic converter Engine 176 in model 217, 222
Remove/install chain tensioner Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install diesel particulate filter Engine 607 in model 117, 156, 176, 246
Remove/install fan unit Engine 176 in model 463 up to model year 2019 Engine 642.887 in model 463
Remove/install filler neck for engine oil Engine 176 in model 463 as of model year 2019
Check main circuit coolant level Engine 157, 273, 279, 642 in model 463 Engine 176 in model 463 up to model year 2019
Remove/install cylinder head cover Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install charge air cooler 27.11.2014 MODEL 117 with ENGINE 270, 607, 651 MODEL 156 with ENGINE 270, 607, 651 MODEL 176 with ENGINE 270, 607, 651 MODEL 242 with ENGINE 270 MODEL 246 with ENGINE 270, 607, 651
Remove/install sound generator control valve Engine 133 in model 117, 156, 176 with code U21 (AMG Performance exhaust system)
Remove/install engine hood lifter Model 117, 156, 176 with code U60 (Active Bonnet (Pedestrian protection))
Remove/install rear engine mount Engine 176 in model 217, 222 Engine 656 in model 222
Pour in coolant and bleed cooling system Engine 133, 139, 152, 155, 156, 157, 159, 176, 177, 178, 260, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282 Engine 157, 176, 177, 279, 642 Engine 607, 608, 628, 629, 642, 651
Remove/install fuse and relay module in engine compartment left front Model 117, 156, 176, 242, 246
Remove/install front cap on cylinder head Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install regulator for alternator Engine 133 in model 117, 156, 176
Remove/install lower engine compartment lining Model 117 with engine 133, 270 Model 156 Model 176 with engine 133, 270 Model 242 with engine 270, 780 Model 246 with engine 270
Remove/install alternator Engine 133 in model 117, 156, 176
General information on work on gasoline direct injection system Engine 133, 139, 152, 157, 176, 177, 178, 260, 264, 270, 274, 276, 278, 282 Engine 254.9 Engine 256.9 Engine 271.8, 272.9
Remove/install low-temperature circuit coolant expansion reservoir ENGINE 133 in MODEL 117, 156, 176
000 588 09 31 00 Transmission mount adapter Engine 651 in model 117, 156, 176, 246 Engine 651 in model 910
Remove/install oil dipstick guide tube ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install belt pulley/vibration damper Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 607 in model 117, 156, 176, 246
Tighten connecting rod bolts Engine 176, 177, 178
Remove/install oil pan Engine 176 in model 217, 222 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install starter front-end relay Model 117, 156, 176, 246 with code 4U7 (Start/stop voltage dip protector) Model 242 with engine 270 with code 4U7 (Start/stop voltage dip protector)
Remove/install oil pan Engine 176 in model 217, 222 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Check low-temperature circuit for leaktightness Engine 176 in model 463 up to model year 2019 Engine 642 in model 463
Remove/install PTC heater booster MODEL 117, 156, 176, 246 with ENGINE 607, 651
Remove/install components for exhaust system Engine 651 in model 117, 156, 176, 246
Disconnect engine wiring harness ENGINE 607 in MODEL 117, 156, 176, 246
Routing diagram for poly-V belt Engine 260 in model 118, 177, 247 Engine 270 in model 242 Engine 270, 651 in model 117, 156, 176, 246
Remove/install injection system control unit ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install left oil separator Engine 176 in model 217, 222
Remove/install catalytic converter ENGINE 275.950 in MODEL 215.376, 220.176 ENGINE 275.980 in MODEL 215.379, 220.179
Notes on sealant path for oil pan Engine 607 Engine 608 Engine 642 Engine 651 in model 117, 156, 176, 246 Engine 656
Remove/install upper pendulum support Engine 270 in model 242 Engine 270, 607, 651 in model 117 Engine 270, 607, 651 in model 156 Engine 270, 607, 651 in model 176 Engine 270, 607, 651 in model 246.2
Remove/install right cylinder head cover Engine 176 in model 217, 222
Remove/install bushing of transmission mounting TRANSMISSION 724.0 in MODEL 117, 156, 176 with ENGINE 133
Remove/install rear engine mount Engine 157, 279 in model 463 Engine 176 in model 463 up to model year 2019
Remove/install piston Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 274.9 in model 172, 204, 205, 207, 212, 218, 253
Remove/install left cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Test compression pressure Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install transmission with torque converter 06.03.2020 Transmission Transmission Transmission Transmission Transmission 722.9 in model 463 with engine 176 722.9 in model 463 with engine 279 722.902 in model 463 with engine 642 as of model year 2013 722.904 in model 463 with engine 273 as of model year 2013 722.905 in model 463 with engine 157 as of model year 2013
Remove/install timing case cover Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install air filter housing ENGINE 133 in MODEL 117, 156, 176
Remove/install rail Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install valves Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install oil dipstick guide tube Engine 133 in model 117, 156, 176
Disconnect engine wiring harness ENGINE 270 in MODEL 117, 156, 176, 242, 246
Remove/install oil pan Engine 176 in model 463 as of model year 2019
Remove/install exhaust gas recirculation pipe ENGINE 651 in MODEL 117, 156, 176, 246 with CODE 927 (Exhaust treatment with EURO6 technology)
Remove/install throttle valve actuator ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Mount connecting rod bearing Engine 176, 177, 178
Replace timing chain ENGINE 133 in MODEL 117, 156, 176
Remove/install left oxygen sensor downstream of catalytic converter Engine 176 in model 217, 222
Remove/install left air filter housing Engine 176 in model 217, 222
Remove/install air intake pipe Engine 270 in model 117, 156, 176, 242, 246.2 except code 494 (US version)
Remove/install rear engine support Engine 176 in model 463 as of model year 2019 Engine 177 in model 463 as of model year 2019
Replace rear radial shaft sealing ring Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install filler neck of fuel tank Model 117 with engine 133, 270, 607, 651 Model 156 with engine 133, 270, 607, 651 Model 176 with engine 133, 270, 607, 651 Model 242 with engine 270 Model 246 with engine 270, 607, 651
Remove/install oxygen sensors Engine 607 in model 117, 156, 176, 246
Remove/install right engine mount ENGINE 133 in MODEL 117, 156, 176
Remove/install pressure differential sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install coolant temperature sensor ENGINE 133 in MODEL 117, 156, 176
Remove/install front cover on left cylinder head Engine 176 in model 463 as of model year 2019
Remove/install coolant thermostat Engine 133 in model 117, 156, 176
Engine oil and oil filter change Engine 133 in model 117, 156, 176
Remove/install oil pan Engine 133 in model 117, 156, 176
Remove/install belt drive components ENGINE 133 in MODEL 117, 156, 176
Remove/install rear engine cross member ENGINE 275.950 in MODEL 220.176 ENGINE 628.960 in MODELS 220.028 /128 ENGINE 275.980 in MODEL 220.179
Adjust engine hood Model 117, 156, 176, 242, 246
Remove/install coolant pump Engine 133 in model 117, 156, 176
Remove/install heated O2 sensor ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Replace front radial shaft sealing ring Engine 176 in model 217, 222
Refrigerant compressor remove/install Engine 133.980 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Replace deformation part for engine hood hinge MODEL 117, 156, 176 with CODE U60 (Active Bonnet (Pedestrian protection))
Remove/install knock sensors ENGINE 133 in MODEL 117, 156, 176
Inspect cooling system for leaks Engine 270 in model 242 Engine 270, 607, 651 in model 117 Engine 270, 607, 651 in model 156 Engine 270, 607, 651 in model 176, 246
Replacing rear crankshaft radial seal Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246
Remove/install fan unit ENGINE 133 in MODEL 117, 156, 176
Remove/install radiator ENGINE 270 in MODEL 242 ENGINE 270, 607, 651 in MODEL 117 ENGINE 270, 607, 651 in MODEL 156 ENGINE 270, 607, 651 in MODEL 176 ENGINE 270, 607, 651 in MODEL 246
Replace main circuit coolant Engine 157, 273, 279, 642 in model 463 Engine 176 in model 463 up to model year 2019
Remove/install catalytic converter Engine 270 in model 117, 176, 242, 246
Bolt tightening procedure for cylinder head cover Engine 176, 177, 178
Replace oil filter element drain oil filter Engine 133 in model 117, 156, 176
Remove/install slide rail of timing chain ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install lower pendulum support Engine 270 in model 242 Engine 270, 607, 651 in model 117 Engine 270, 607, 651 in model 156 Engine 270, 607, 651 in model 176 Engine 270, 607, 651 in model 246
Inspect cylinders with a light probe Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Service Information: Oil filter change Engine 270 in model 117, 156, 176, 242, 246 Engine 274 in model 172, 204, 205, 207, 212, 213, 218, 253 Engine 274 in model 447, 448
Remove/install air filter housing ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Check high-pressure lines Engine 133, 152.9, 157, 176, 178, 264, 270, 271.8, 274, 276, 278 Engine 260, 282
Remove/install fan unit ENGINE 270 in MODEL 117, 156, 176, 242, 246 ENGINE 607 in MODEL 117, 156, 176, 246 ENGINE 651 in MODEL 117, 156, 176, 246
Disconnect engine wiring harness Engine 133 in model 117, 156, 176
Check cylinder head bolts Engine 646 in model 203, 209 Engine 646.8 in model 211 Engine 646.951 in model 211.004 Engine 646.961 in model 211.006/206/606 Engine 647.961 in model 211.016/216/616 Engine 648 in model 220 Engine 648.961 in model 211.023/026/223/226 Engine 651 in model 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 221, 222, 246, 253 Engine 654 Engine 656
Remove/install camshaft adjusters Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Open close coolant line coupling Engine 133, 139, 152, 156, 157, 159, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 622, 626, 629, 640, 642, 646, 651, 654, 656, 780
Unscrew / screw on engine fasteners Engine 270 in model 117, 156, 176, 242, 246 Engine 651 in model 117, 156, 176, 246
Check main circuit coolant level Engine 176 in model 463 as of model year 2019 Engine 177, 264, 656 in model 463
Remove/install right air filter housing Engine 176 in model 217, 222
Remove/install cylinder head cover trim ENGINE 607 in MODEL 117, 156, 176, 246 ENGINE 651 in MODEL 117, 156, 176, 246
Attach/remove retaining lock for engine Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Drain/pour in coolant Engine 176, 177 in model 217, 222
Remove/install components for exhaust system Engine 133 in model 117, 156, 176
Remove/install right cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install boots on front axle shaft Model 117, 156, 176, 242, 246 with transmission 711.6, 724.0 Model 242 with engine 780
Remove/install right oil separator Engine 176 in model 217, 222
Notes on sealant path for cylinder head cover Engine 133, 152.9, 157, 159.9, 176, 177, 178, 260, 264, 270, 272, 273, 274, 276, 278, 282
Move Lanchester balance shaft to basic position Engine 270.920 in model 117, 156, 176.04, 246.24
Remove/install center muffler Engine 270 in model 117, 156, 246 except code 598 (Gasoline particulate filter (OPF) with sensor system) Engine 270 in model 176, 242
Overview – Check engine oil level Engine 111, 112, 113, 133, 137, 139, 152, 156, 157, 159, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 285, 607, 608, 611, 612, 626, 628, 629, …
Oil pan bottom section tightening procedure Engine 176, 177
Remove/install high-pressure pump Engine 270 in model 117, 156, 176, 242, 246.2
Disconnect engine wiring harness ENGINE 651 in MODEL 117, 156, 176, 246
Check fuel high pressure circuit. Engine 133, 139, 152.9, 157, 176, 177, 178, 254.9, 256.9, 260, 264, 270, 274, 276, 278, 282
Remove/install alternator belt pulley ENGINE 133 in MODEL 117, 156, 176
Remove/install a pressure sensor Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install filler neck for engine oil Engine 176 in model 217, 222
Remove/install fuel injectors Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install cylinder head Engine 133 in model 117, 156, 176
Remove/install fuel pump control unit Engine 133, 270, 607, 651 in model 117, 156, 176, 242
Remove/install ignition coils Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Engine oil and oil filter change Engine 176 in model 217, 222
Remove/install oil pump ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install exhaust gas temperature probe Engine 607 in model 117, 156, 176, 246
Remove/install left cylinder head cover Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Drain/fill low-temperature circuit coolant ENGINE 133 in MODEL 117, 156, 176
Check cylinders for leaks Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Relieve fuel pressure Engine 133, 139, 152.9, 157, 176, 177, 178, 254.9, 256, 260, 264, 270, 274, 276, 278, 282
Damage profiles for a poly-V belt Engine 102, 103, 104, 111, 112, 113, 119, 120, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 254, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 281, 282, 285, …
Remove/install air filter housing ENGINE 651 in MODEL 117 ENGINE 651 in MODEL 156 ENGINE 651 in MODEL 176 ENGINE 651 in MODEL 246
Drain/pour in coolant Engine 176 in model 463 up to model year 2019 Engine 642.887 in model 463
Remove/install pressure transducer for boost pressure control ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install engine with transmission Engine 133 in model 117, 156, 176
Remove/install front axle Model 117, 156, 176, 246 Model 242 with engine 270
Remove/install engine cover ENGINE 275.950 in MODEL 215.376, 220.176 ENGINE 275.951 in MODEL 230.476 ENGINE 275.953 in MODEL 216.376, 221.176 ENGINE 275.954 in MODEL 230.477 ENGINE 285 in …
Remove/install right cylinder head Engine 176 in model 217, 222
Remove/install diesel particulate filter temperature sensor ENGINE 651 in MODEL 117, 156, 176, 246
Empty/fill fuel tank Model 117, 156, 176 with engine 133 Model 117, 156, 176, 242, 246 with engine 270 Model 117, 156, 176, 246 with engine 607 Model 117, 156, 176, 246 with engine 651
Remove/install pendulum support ENGINE 133 in MODEL 117, 156, 176
Remove/install exhaust system Engine 176 in model 217, 222
Remove/install right engine mount Model 117 with engine 270, 607, 651 Model 156 with engine 270, 607, 651 Model 176 with engine 270, 607, 651 Model 242 with engine 270 Model 246 with engine 270, 607, 651
Connecting recording-type compression tester ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246 ENGINE 607 in MODEL 117, 156, 176, 246.2 ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install front cover on right cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install flywheel / drive plate Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Replace rear radial shaft sealing ring Engine 176 in model 217, 222
Remove/install front axle shafts Model 117, 156, 176, 242, 246 with transmission 711.6, 724.0 Model 242 with engine 780
Remove/install right rear engine suspension lug Engine 176 in model 217, 222
Open and close coupling Engine 133, 139, 152, 156, 157, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 626, 629, 640, 642, 646, 651, 654, 656, 780
Remove/install injection system control unit ENGINE 651 in MODEL 117, 156, 176 ENGINE 651 in MODEL 246
Remove/install heated O2 sensor ENGINE 133 in MODEL 117, 156, 176
Bolt tightening procedure for cylinder head cover Engine 133 in model 117, 156, 176 Engine 260 in model 118, 177, 247 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install fuel tank Model 117, 156, 176 with engine 133
Remove/install starter Engine 176 in model 217, 222
Remove/install bottom part of oil pan Engine 176 in model 217, 222 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install left cylinder head Engine 176 in model 217, 222
Remove/install left oil separator Engine 176 in model 463 as of model year 2019
Check main circuit coolant level Engine 157, 176, 177, 256.9, 264, 276, 277, 278, 279, 642, 651, 656 in model 222 Engine 157, 176, 177, 276.8, 278, 279 in model 217
Remove/install crankshaft position sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install charge air manifold ENGINE 133 in MODEL 117, 156, 176
Remove/install engine from/onto front axle carrier Engine 176 in model 217, 222
Notes on avoiding damage to ignition system Engine 133, 139, 152.9, 157, 176, 177, 178, 256.9, 260, 270, 273, 274, 276, 278, 282 Engine 254.9 in model 213 Engine 264 in model 167, 205, 213, 222, 238, 253, 257 Engine 264 in model …
Replace spark plugs Engine 270 in model 117, 156, 176, 242, 246
Tightening procedure for center part of oil pan Engine 176 in model 167 Engine 176, 177 in model 463 as of model year 2019 Engine 177
Remove/install engine with front axle carrier Engine 176 in model 217, 222
Remove/install engine with transmission Engine 176 in model 463 up to model year 2019
Remove/install turbocharger with exhaust manifold Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install engine cover Engine 176 in model 463 as of model year 2019
Remove/install rear engine support Engine 176, 177 in model 217, 222 Engine 656 in model 222
Check oil pressure Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install front cap on cylinder head Engine 133 in model 117, 156, 176
Remove/install charge air manifold Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install valve springs and/or valve stem seals Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Align clamp between turbocharger and catalytic converter Engine 176 in model 463 Engine 177 in model 205 Engine 177 in model 253 Engine 178 in model 190
Replace front radial shaft sealing ring Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install exhaust manifold Engine 133 in model 117, 156, 176
Notes on distribution of sealant on crankcase end cover Engine 176 in model 167, 217, 222, 223 Engine 176 in model 463 Engine 177 Engine 178 in model 190
Remove/install fan unit Engine 176 in model 217, 222
Remove/install expansion reservoir Engine 133 in model 117, 156, 176
Check main circuit coolant level Engine 176, 177, 256, 264, 274, 654, 656 in model 167
Remove/install hydraulic valve clearance compensating elements ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install starter Engine 270 in model 242 Engine 270, 607, 651 in model 117 Engine 270, 607, 651 in model 156, 176, 246
Remove/install inertization system line in engine compartment Model 117, 156, 176 with engine 133, 270 with code 2U8 (Alternative refrigerant) Model 242, 246 with engine 270 with code 2U8 (Alternative refrigerant)
Attach/detach engine support fixture Engine 176, 177 in model 463 as of model year 2019
Remove/install inertization cartridge Model 117, 156, 176 with engine 133, 270 with code 2U8 (Alternative refrigerant) Model 242, 246 with engine 270 with code 2U8 (Alternative refrigerant)
Remove/install components for exhaust system Engine 607 in model 117, 156, 176, 246
Remove/install shield of rack-and-pinion steering MODEL 117, 156, 176, 246 with ENGINE 270, 651 (except 651.930) MODEL 242 with ENGINE 270.920
Remove/install left cylinder head cover Engine 176 in model 217, 222
Engine oil and oil filter change Engine 270.910 in model 117, 156, 176, 246
Set basic position of camshafts Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Check low-temperature circuit coolant level Engine 176 in model 167, 217, 222 Engine 176, 177 in model 463 Engine 177 in model 167, 205, 213, 217, 222, 253, 290
Remove/install air filter housing Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Inspect cooling system for leaks Model 217 with engine 157, 176, 177, 276, 278, 279 Model 222 with engine 157, 176, 177, 256, 264, 276.8/9, 277, 278, 279, 642, 651, 656
Engine oil and oil filter change Engine 176 in model 167 Engine 176 in model 463
Remove/install bottom part of oil pan Engine 176 in model 463 up to model year 2019
Remove/install left turbocharger Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Container for escaping engine oil during oil filter change MODEL 117, 156, 176, 246 with ENGINE 607
Remove/install cylinder head cover Engine 133 in model 117, 156, 176
Remove/install turbocharger Engine 133 in model 117, 156, 176
Drain/pour in coolant Engine 270 in model 117, 156, 176, 242, 246 Engine 607 in model 117, 156, 176, 246 Engine 651 in model 117, 156, 176, 246
Engine overview – Oil and filter change Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 197.3/4, 204, 205, 207, 212, 213, 216, 217, 218, 221, 222, 223, 231, 238, 242, 246, 247, 253, 257, 290, 292, 293, 461, 463
Remove/install bottom part of oil pan Engine 176 in model 217, 222 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install pressure transducer for boost pressure control ENGINE 133 in MODEL 117, 156, 176
Service Information: Engine oil change Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 197, 199, 204, 205, 207, 212, 213, 217, 218, 222, 231, 238, 242, 246, 247, 253, 257, 292, 451, 453 Model 164.1## #A as of 193232 Model …
Replace front radial shaft sealing ring Engine 176 in model 463 as of model year 2019
Check engine oil level with instrument cluster Engine 176 in model 167, 217, 222 Engine 176 in model 463 as of model year 2019 Engine 256 in model 167, 222 Engine 264 in model 167, 222 Engine 264 in model 463 Engine 274 in model …
Remove/install rear engine support Engine 176 in model 463 up to model year 2019 Engine 279 in model 463
Replace full-load crankcase ventilation system Engine 133 in model 117, 156, 176
Remove/install oil filter housing Engine 133 in model 117, 156, 176
Remove install crankshaft pulse ring Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install solenoid camshaft Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install right oil separator Engine 176 in model 463 as of model year 2019
Remove/install flywheel / drive plate Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 607 in model 117, 156, 176, 246 Engine 651 in model 117, 156, 176, 246
Remove/install charge air ducts ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install park pawl battery MODEL 117, 156, 176, 246 with TRANSMISSION 724 with CODE 4U7 (Start/stop voltage dip protector) MODEL 242 with ENGINE 270 with TRANSMISSION 724 with CODE 4U7 (Start/stop …
Remove/install injection system control unit ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Replace front crankshaft radial sealing ring ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install oil level check switch ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install front cover on right cylinder head Engine 176 in model 463 as of model year 2019
Remove/install chain tensioner ENGINE 133 in MODEL 117, 156, 176
Remove/install bottom parts of soundproofing Model 117 with engine 607, 651 Model 156 with engine 607 Model 176 with engine 607, 651 Model 246 with engine 607, 651
Remove/install engine intake air duct downstream of air filter ENGINE 651 in MODEL 117 ENGINE 651 in MODEL 156 ENGINE 651 in MODEL 176 ENGINE 651 in MODEL 246
Remove/install additional battery Model 117, 156, 246 up to model year 2016 with code B03 (ECO start/stop function) Model 176 up to model year 2016 with code B03 (ECO start/stop function) Model 242 with engine 270 up to …
Bolt plan for timing case cover Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install piston rings Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 274.9 in model 172, 204, 205, 207, 212, 218, 253
Remove/install left oxygen sensor upstream of catalytic converter Engine 176 in model 217, 222
Remove/install tensioning rail ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Check basic position of camshafts ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install pressure differential sensor ENGINE 651 in MODEL 117, 156, 176, 246
General information on inspecting cylinder walls Engine 133, 139, 156, 176, 177, 178, 254, 256.9, 276.8, 654, 656 Engine 159
Remove/install engine with transmission Engine 607 in model 117, 156, 176, 246
Attach/detach engine hoist Model 117, 156, 176, 242, 246
Notes on the assessment of pistons and piston rings Engine 111, 112, 113, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 285 Engine 112, 113, 157, …
Remove/install pyrofuse electrical connector MODEL 117, 156, 176 MODEL 242 with ENGINE 270 up to model year 2015 MODEL 246 up to model year 2015
Remove/install bottom part of oil pan Engine 176 in model 463 as of model year 2019
Remove/install engine covers Engine 176 in model 167
Remove/install left cylinder head Engine 176 in model 463 as of model year 2019
Remove/install charge air cooler circulation pump Engine 133 in model 117, 156, 176
Disconnect/connect transmission oil line Transmission 722.9 in model 463 with engine 157 Transmission 722.9 in model 463 with engine 176 Transmission 722.9 in model 463 with engine 279 Transmission 722.9 in model 463 with …
Remove/install fuel pump Engine 133 in model 117, 156, 176 Engine 270, 651 in model 117 with code M005 (4MATIC) Engine 270, 651 in model 156 with code M005 (4MATIC) Engine 270, 651 in model 176 with code …
Remove/install catalytic converter temperature sensor Engine 607 in model 117, 156, 176, 246
Remove/install belt drive components ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install drive plate Engine 176 in model 217, 222
Remove/install engine Engine 176 in model 463 as of model year 2019
Remove/install diesel particulate filter temperature sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install charge air cooler Engine 133 in model 117, 156, 176
Remove/install camshafts Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Tightening procedure for cylinder head bolts Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install front axle differential propeller shaft Model 217, 222 with engine 176, 278 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 217, 222 with engine 177 with transmission 725.0 with code M005 …
Engine oil and oil filter change Engine 270.920 in model 117, 156, 176, 242, 246
Engine oil and oil filter change Engine 607 in model 117, 156, 176, 246
Remove/install pressure transducer for boost pressure control ENGINE 607 in MODEL 117, 156, 176, 246
Oil line removal and installation ENGINE 133 in MODEL 117, 156, 176
Remove/install charge air hoses ENGINE 133 in MODEL 117, 156, 176
Notes on coolant Engine 100, 102, 103, 104, 110, 111, 112, 113, 114, 115, 116, 117, 119, 120, 121, 123, 127, 129, 130, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 180, 254, 256, 260, 264, 266, …
Relay assignment of fuse and relay box in left side of engine compartment MODEL 221.176 with CODE (Z07) Top protection up to Model Year 8
Remove/install engine with transmission Engine 270 in model 117, 156, 176, 242, 246.2
Firing order Engine 133, 139, 152.9, 157, 176, 177, 260, 270, 274, 276, 278, 282
Tightening procedure for cylinder head bolts Engine 176, 177, 178
Remove/install throttle valve actuator ENGINE 133 in MODEL 117, 156, 176
Notes on sealant path for oil pan Engine 133, 152.9, 157, 256.9, 260, 264, 270, 274, 276, 278, 282 Engine 176 in model 217, 222, 223 Engine 176, 177 in model 167 Engine 177 in model 205, 213 Engine 177 in model 217, …
Remove/install cylinder head Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install front cover on left cylinder head Engine 176 in model 217, 222
Remove/install retaining lock for crankshaft/ring gear Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246 Engine 607 in model 117, 156, 176, 246 Engine 651 in model 117, 156, 176, 246
Remove/install alternator Engine 270 in model 117, 156, 176, 242, 246
Check main circuit coolant level 29.06.2017 Engine 112, 113, 156, 271, 272, 273, 628, 629, 642, 646, 647, 648 in model 211 Engine 113, 271, 272 in model 171 Engine 133, 270, 607, 651 in model 117, 176 Engine 133, 270, 607, 651 in model 156 Engine 270 in model 242 Engine 270, 607, 651 in model 246
Tightening procedure for charge air manifold Engine 133 in model 117, 156, 176 Engine 260 in model 118, 177, 247 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install low-pressure exhaust gas recirculation cooler ENGINE 651 in MODEL 117, 156, 176, 246 with CODE 927 (Exhaust treatment with EURO6 technology)
Engine oil and oil filter change Engine 651 in model 117, 156 except code U43 (BLUETEC DIESEL EMISSION CONTR. ( NOx storage cat.)) Engine 651 in model 166, 172, 176, 204, 207, 212, 218, 221, 222 Engine 651.901 …
Remove/install transmission with torque converter Transmission 725.0 in model 217, 222 with engine 176 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install engine with transmission Engine 651 in model 117, 156, 176, 246
Remove/install transmission with torque converter Transmission 725.0 in model 217, 222 with engine 176 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Assembly and covering work when painting the engine hood MODEL 117, 156, 176
Remove/install additional battery relay Model 117, 156, 246 up to model year 2016 with code B03 (ECO start/stop function) Model 176 up to model year 2016 with code B03 (ECO start/stop function) Model 242 with engine 270 up to …
Remove/install oil separator Engine 133 in model 117, 156, 176
Tightening procedure for oil pan bolts ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install charge air cooling low-temperature circuit additional engine radiator ENGINE 133 in MODEL 117, 156, 176
Remove/install engine hood MODEL 117, 156, 176, 242, 246
Remove/install crankshaft Hall sensor Engine 133 in model 117, 156, 176
Remove/install sound generator Engine 133 in model 117, 156, 176 with code U21 (AMG Performance exhaust system)
Replace front crankshaft radial sealing ring ENGINE 133 in MODEL 117, 156, 176 ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install primary chain drive tensioning rail Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install center exhaust system Engine 176 in model 217, 222
Remove/install coolant line to low-temperature circuit expansion reservoir Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install knock sensors Engine 176 in model 463 up to model year 2019
Reduce fuel pressure through service valve Engine 176, 177 in model 167 Engine 176, 177 in model 217, 222
Remove/install coolant circuit return line of turbochargers Engine 176 in model 463 as of model year 2019
Camshaft bearing bridge sealant path Engine 176, 177, 178 Engine 176, 177
Remove/install left front engine support Engine 176 in model 463 as of model year 2019
Remove/install belt drive components ENGINE 651 in MODEL 117 ENGINE 651 in MODEL 156 ENGINE 651 in MODEL 176 ENGINE 651 in MODEL 246
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 176 in model 167 Engine 176 in model 217, 222
Remove/install oil pump chain Engine 176 in model 463 as of model year 2019
Remove/install left high-pressure fuel pump Engine 176 in model 217, 222
Apply alignment marks to belt pulley of crankshaft Engine 176 in model 463 up to model year 2019 Engine 176, 177 in model 167 Engine 177 in model 205 Engine 178 in model 190
Remove/install charge air distributor Engine 176 in model 463 up to model year 2019
Remove/install position sensors of camshafts Engine 176 in model 463 up to model year 2019
Remove/install lift solenoid of left intake camshaft at rear Engine 176 in model 463 as of model year 2019
Remove/install primary chain drive timing chain Engine 176 in model 217, 222
Remove/install radiator Engine 176 in model 217, 222
Remove/install upper coolant expansion reservoir for low-temperature circuit Engine 176 in model 463 as of model year 2019
Remove/install crankshaft Hall sensor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install alternator Engine 176 in model 217, 222
Remove/install right turbocharger Engine 176 in model 463 as of model year 2019
Remove/install engine oil fill level sensor Engine 176 in model 217, 222
Remove/install condenser Model 217, 222 with engine 176 Model 217, 222 with engine 177 Model 222 with engine 656
Disconnecting and connecting harness at starter ENGINE 133 in MODEL 117, 156, 176
Remove/install left water-cooled charge air cooler Engine 176 in model 463 as of model year 2019
Remove/install guide pulley for poly-V belt of alternator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right secondary chain drive chain tensioner Engine 176 in model 463 as of model year 2019
Check crankshaft in removed state Engine 176, 177, 178
Remove/install primary chain drive chain tensioner Engine 176 in model 463 as of model year 2019
Remove/install coolant pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right high-pressure fuel pump Engine 176 in model 463 as of model year 2019
Remove/install alternator Engine 651 in model 117, 156, 176, 246
Check basic position of camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install lower coolant expansion reservoir for low-temperature circuit Engine 176 in model 217, 222
Set basic position of camshafts Engine 176 in model 463 as of model year 2019
Remove/install poly-V belt for power steering pump and refrigerant compressor Engine 176 in model 463 up to model year 2019
Remove poly-V-belt of refrigeration compressor of air conditioning system install Engine 176 in model 463 as of model year 2019
Remove/ install activated charcoal canister MODEL 117, 156, 176, 246 with ENGINE 270
Remove/install left high-pressure line Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of right intake camshaft at front Engine 176 in model 217, 222
Remove/install coolant circuit feed line of turbochargers Engine 176 in model 463 as of model year 2019
Remove/install shutoff valve Engine 176 in model 463 as of model year 2019
Remove/install position sensor of right cylinder bank intake camshaft Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of left intake camshaft at front Engine 176 in model 217, 222
Remove poly-V-belt of refrigeration compressor of air conditioning system install Engine 176 in model 217, 222
Remove/install guide pulley for poly-V belt of alternator Engine 176 in model 217, 222
Remove/install lower guide pulley for poly-V belt of refrigerant compressor Engine 176 in model 463 as of model year 2019
Remove/install poly V-belt of alternator Engine 176 in model 217, 222
Remove/install hydraulic valve clearance compensating elements Engine 176 in model 463 as of model year 2019
Remove/install alternator Engine 176 in model 463 up to model year 2019
Remove/install left secondary chain drive chain tensioner Engine 176 in model 463 as of model year 2019
Remove/install left high-pressure fuel pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install position sensors of camshafts on right cylinder bank Engine 176 in model 217, 222
Remove/install right boost pressure sensor upstream of throttle valve Engine 176 in model 217, 222
Routing diagram for poly-V belt ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install engine oil temperature sensor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install left oxygen sensor downstream of catalytic converter Engine 176 in model 463 as of model year 2019
Remove/install coolant pump Engine 176 in model 463 as of model year 2019
Remove/install hydraulic valve clearance compensating elements Engine 176 in model 217, 222
Replace rear radial shaft sealing ring Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of left exhaust camshaft at front Engine 176 in model 217, 222
Replace fuel injector sealing ring Engine 133, 139, 152.9, 157, 176, 177, 178, 254, 256, 260, 264, 270, 274, 276, 278
Remove/install center part of oil pan Engine 176 in model 463 as of model year 2019
Remove/install right oxygen sensor upstream of catalytic converter Engine 176 in model 463 as of model year 2019
Tightening procedure for charge air distributor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install additional engine radiator Engine 176 in model 217, 222
Refrigerant compressor remove/install Engine 651.9 in model 117, 156, 176, 246.2
Remove/install belt pulley/vibration damper Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install position sensor of left cylinder bank intake camshaft Engine 176 in model 463 as of model year 2019
Remove/install coolant thermostat Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install left water-cooled charge air cooler Engine 176 in model 463 up to model year 2019
Remove/install right water-cooled charge air cooler Engine 176 in model 463 as of model year 2019
Determine crankshaft bearing axial play Engine 176, 177, 178, 254, 256
Remove/install slide rails on secondary chain drive Engine 176 in model 463 as of model year 2019
Remove/install alternator belt pulley Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190 Engine 279 in model 463
Remove/install cooling module Engine 176 in model 463 as of model year 2019
Remove/install crankshaft Engine 176 in model 217, 222
Remove/install lift solenoid of right intake camshaft at front Engine 176 in model 463 as of model year 2019
Remove/install position sensors of camshafts on left cylinder bank Engine 176 in model 217, 222
Remove/install boost pressure sensor downstream of throttle valve Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install oxygen sensors Engine 176 in model 463 up to model year 2019
Replace rear muffler Engine 157, 279 in model 463 Engine 176 in model 463 up to model year 2019
Remove/install boost pressure sensor upstream of throttle valve Engine 176 in model 463 up to model year 2019
Remove/install the tensioning device for the oil pump chain Engine 176 in model 217, 222
Remove/install crankshaft Hall sensor Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install primary chain drive timing chain Engine 176 in model 463 as of model year 2019
Remove/install camshafts of right cylinder bank Engine 176 in model 463 as of model year 2019
Remove/install coolant thermostat Engine 176 in model 217, 222
Remove/install slide rails on primary chain drive Engine 176 in model 217, 222
Remove/install front engine mount Engine 176 in model 463 up to model year 2019
Remove/install cold air intake Engine 176 in model 463 as of model year 2019
Remove/install left boost pressure sensor downstream of throttle valve Engine 176 in model 463 as of model year 2019
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 176 in model 217, 222
Remove/install the tensioning device for the oil pump chain Engine 176 in model 463 as of model year 2019
Remove/install left bypass air switchover valve Engine 176 in model 217, 222
Remove/install camshafts of right cylinder bank Engine 176 in model 217, 222
Remove/install lift solenoid of right exhaust camshaft at rear Engine 176 in model 463 as of model year 2019
Tightening procedure for charge air distributor Engine 176 in model 167 Engine 176 in model 463 as of model year 2019
Remove/install slide rails on primary chain drive Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install ignition coils of left cylinder bank Engine 176 in model 463 as of model year 2019
Remove/install coolant pump Engine 607 in model 117, 156, 176, 246
Remove/install upper guide pulley for poly-V belt of refrigerant compressor Engine 176 in model 463 as of model year 2019
Tightening procedure for exhaust manifold Engine 176 Engine 177 Engine 178
Remove/install ignition coils of right cylinder bank Engine 176 in model 463 as of model year 2019
Remove/install secondary chain drive timing chains Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install right inerting system line in engine compartment Model 217 with engine 157, 176, 177, 276, 278, 279 with code 2U8 (Alternative refrigerant) Model 222 with engine 157, 176, 177, 256, 276, 277, 278, 279 with code 2U8 (Alternative refrigerant)
Set engine at cylinder 1 to 40 degrees after top dead center Engine 176 Engine 177 in model 205, 253 Engine 178
Remove/install camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install crankshaft Engine 176 in model 463 as of model year 2019
Disconnect/connect engine wiring harness to remove engine Engine 176 in model 217, 222
Remove/install front axle differential propeller shaft Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019
Remove/install power steering pump Model 463 with engine 176 up to model year 2019
Remove/install front engine mount Engine 176 in model 463 as of model year 2019
Remove/install radial shaft sealing ring of camshaft Engine 607 in model 117, 156, 176, 246
Remove/install exhaust manifold heat shield Engine 176 in model 167 Engine 176 in model 217, 222 Engine 177
Remove/install slide rails on secondary chain drive Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove injection nozzles Engine 133, 139, 152.9, 157, 176, 177, 178, 254, 256, 260, 264, 270, 274, 276, 278
Remove/install low-pressure lines Engine 176 in model 217, 222
Check low-temperature circuit for leaktightness Engine 176 in model 463 as of model year 2019 Engine 177 in model 463 as of model year 2019
Remove/install right bypass air switchover valve Engine 176 in model 217, 222
Remove/install vacuum pump Model 217, 222 with engine 176
Remove/install left rail Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install left secondary chain drive chain tensioner Engine 176 in model 217, 222
Remove/install coolant circuit return line of turbochargers Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install transmission with torque converter Transmission 725.0 in model 463 with engine 176 as of model year 2019
Remove/install right oxygen sensor downstream of catalytic converter Engine 176 in model 463 as of model year 2019
Remove/install ignition coils of left cylinder bank Engine 176 in model 217, 222
Remove/install valve lift switchover actuator ENGINE 270 in MODEL 117, 156, 176, 246.2 with CODE A14 (Camtronic)
Remove/install lift solenoid of right exhaust camshaft at front Engine 176 in model 217, 222
Remove/install chain tensioner Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install hydraulic valve clearance compensating elements Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install exhaust manifold Engine 176 in model 463 as of model year 2019
Remove/install alternator Engine 176 in model 463 as of model year 2019
Remove/install refrigerant pressure sensor Model 463 with engine 176, 177 as of model year 2019
Remove/install drive plate Engine 176 in model 463 as of model year 2019
Remove/install right rail with fuel injectors Engine 176 in model 463 as of model year 2019
Remove/install camshaft positioner of right cylinder bank Engine 176 in model 463 as of model year 2019
Check low-pressure line Engine 176, 177, 178, 264
Remove/install front engine support Engine 176 in model 463 up to model year 2019
Remove/install circulation pump for low-temperature water circuit Engine 176 in model 463 up to model year 2019 Engine 642 in model 463
Remove/install oil pump chain Engine 176 in model 217, 222
Remove/install retaining lock for crankshaft Engine 176 in model 217, 222
Remove/install lower coolant expansion reservoir for low-temperature circuit Engine 176 in model 463 as of model year 2019
Remove/install right rail Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install right rail with fuel injectors Engine 176 in model 217, 222
Remove/install front engine mount Engine 176 in model 217, 222 Engine 177 in model 217, 222
Remove/install lift solenoid of left exhaust camshaft at rear Engine 176 in model 217, 222
Remove/install coolant pump Engine 176 in model 217, 222
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 176 in model 217, 222
Remove/install left charge air temperature sensor downstream of throttle valve Engine 176 in model 463 as of model year 2019
Remove/install solenoid of left intake camshaft Engine 176 in model 463 as of model year 2019
Reduce fuel pressure through service valve Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install left boost pressure sensor upstream of throttle valve Engine 176 in model 217, 222
Remove/install boost pressure control pressure transducer Engine 176 in model 463 as of model year 2019
Assign crankshaft bearing shells Engine 152, 157, 176, 177, 178, 276, 278 Engine 157, 176
Remove/install right water-cooled charge air cooler Engine 176 in model 217, 222
Remove/install ignition coils of right cylinder bank Engine 176 in model 217, 222
Remove/install belt pulley/vibration damper Engine 176 in model 217, 222
Remove/install left throttle valve actuator Engine 176 in model 217, 222
Remove/install vacuum pump Model 205 with engine 177 Model 463 with engine 176 up to model year 2019
Remove/install engine intake air duct downstream of air filter ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install camshaft positioner of left cylinder bank Engine 176 in model 463 as of model year 2019
Set basic position of camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install primary chain drive chain tensioner Engine 176 in model 217, 222
Remove/install secondary chain drive timing chains Engine 176 in model 463 as of model year 2019
Oil pump tightening procedure Engine 176 Engine 177 Engine 178
Remove/install solenoid camshaft Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190 (except 190.381)
Unlock/lock coolant expansion reservoir connector coupling Engine 176 in model 167 Engine 176 in model 463 as of model year 2019
Remove/install solenoid of left exhaust camshaft Engine 176 in model 463 as of model year 2019
Remove/install left air filter housing Engine 176 in model 463 as of model year 2019
Remove/install left fuel pressure sensor Engine 176 in model 463 as of model year 2019
Remove/install belt drive components Engine 607 in model 117, 156, 176, 246
Remove/install primary chain drive tensioning rail Engine 176 in model 463 as of model year 2019
Remove/install fan unit Engine 176 in model 463 as of model year 2019
Remove/install tensioning rails on secondary chain drive Engine 176 in model 217, 222
Remove/install left catalytic converter Engine 176 in model 463 as of model year 2019
Check basic position of camshafts Engine 176 in model 463 as of model year 2019
Remove/install upper coolant expansion reservoir for low-temperature circuit Engine 176 in model 217, 222
Actuate circulation pump ENGINE 275.950 in MODEL 215.376, 220.176 /876 ENGINE 275.980 in MODEL 215.379, 220.179
Remove/install poly V-belt of alternator Engine 176 in model 463 as of model year 2019
Remove/install right heat shield on right turbocharger Engine 176 in model 167 Engine 176 in model 463 as of model year 2019
Installing rear crankshaft radial sealing ring Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 217, 222 with engine 176
Remove/install coolant circuit vent line of left turbocharger Engine 176 in model 463 as of model year 2019
Removing/installing a timing belt Engine 607 in model 117, 156, 176, 246
Remove/install shutoff valve Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Check low-temperature circuit for leaktightness Engine 176 in model 217, 222 Engine 256 in model 222
Remove/install tensioning rails on secondary chain drive Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install right charge air distributor Engine 176 in model 463 as of model year 2019
Remove/install oil pump Engine 176 in model 463 as of model year 2019
Inspect cooling system for leaks Engine 176, 177 in model 463 as of model year 2019
Disconnect/connect engine wiring harness to remove engine Engine 176 in model 463 as of model year 2019
Remove/install lower guide pulley for poly-V belt of refrigerant compressor Engine 176 in model 217, 222
Set basic position of camshafts Engine 176 in model 217, 222
Remove/install oil pump Engine 176 in model 217, 222
Remove/install guide pulley for poly-V belt of alternator Engine 176 in model 463 as of model year 2019
Remove/install position sensor of right cylinder bank exhaust camshaft Engine 176 in model 463 as of model year 2019
Remove/install divert air switchover valve Engine 176 in model 463 up to model year 2019
Remove/install oil lines of oil cooling for automatic transmission Engine 176 in model 463 with transmission 722.9 Engine 279 in model 463 with transmission 722.9 Engine 642 in model 463 with transmission 722.9
Detach/attach low-temperature circuit switchover valve mounting support Engine 176 in model 463 as of model year 2019
Remove/install crankshaft Hall sensor Engine 176 in model 217, 222
Remove/install right water-cooled charge air cooler Engine 176 in model 463 up to model year 2019
Remove/install condenser Model 463 with engine 176, 177 as of model year 2019
Remove/install left throttle valve actuator Engine 176 in model 463 as of model year 2019
Remove/install throttle valve actuator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install oil pump chain Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install tensioning device for poly-V belt of alternator Engine 176 in model 463 as of model year 2019
Reduce fuel pressure through service valve Engine 176 in model 463 as of model year 2019
Remove/install coolant circuit vent line of right turbocharger Engine 176 in model 463 as of model year 2019
Check alternator Engine 176 in model 463 as of model year 2019
Remove/install position sensor of left cylinder bank exhaust camshaft Engine 176 in model 463 as of model year 2019
Remove/install poly V-belt of alternator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install left oxygen sensor upstream of catalytic converter Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of left intake camshaft at rear Engine 176 in model 217, 222
Remove/install left turbocharger Engine 176 in model 463 as of model year 2019
Remove/install radiator Engine 176 in model 463 up to model year 2019 Engine 642.887 in model 463
Remove/install lift solenoid of right intake camshaft at rear Engine 176 in model 217, 222
Remove/install primary chain drive tensioning rail Engine 176 in model 217, 222
Remove/install low-pressure lines Engine 176 in model 463 as of model year 2019
Remove/install coolant thermostat Engine 176 in model 463 as of model year 2019
Remove/install coolant expansion reservoir Model 217 with engine 176, 177 Model 222 with engine 176, 177, 656
Remove/install engine oil fill level sensor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install camshaft positioner Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install camshaft positioner of left cylinder bank Engine 176 in model 217, 222
Remove/install alternator Engine 607 in model 117, 156, 176, 246
Detach/attach holder for camshafts Engine 176 in model 463 as of model year 2019 Engine 176, 177 in model 167 Engine 176, 177 in model 217, 222 Engine 177 in model 213 Engine 177 in model 290 Engine 177 in model 463
Remove/install belt pulley Engine 176 in model 463 as of model year 2019
Remove/install right throttle valve actuator Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of left intake camshaft at front Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of right exhaust camshaft at rear Engine 176 in model 217, 222
Remove/install right air filter housing Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of right exhaust camshaft at front Engine 176 in model 463 as of model year 2019
Remove/install upper guide pulley for poly-V belt of refrigerant compressor Engine 176 in model 217, 222 except code 487 (MAGIC BODY CONTROL)
Refrigerant compressor remove/install Model 463 with engine 176 as of model year 2016 up to model year 2019
Remove/install lift solenoid of left exhaust camshaft at front Engine 176 in model 463 as of model year 2019
Remove/install tensioning device for poly-V belt of alternator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install left front engine support Engine 176 in model 217, 222 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Replace all rubber bushings at wheel carrier Model 117, 156, 176 with engine 270, 607, 651 Model 242, 246
Remove/install exhaust manifold Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install camshafts of left cylinder bank Engine 176 in model 217, 222
Remove/install left water-cooled charge air cooler Engine 176 in model 217, 222
Remove/install tensioning rails on secondary chain drive Engine 176 in model 463 as of model year 2019
Remove/install alternator belt pulley ENGINE 270 in MODEL 242 ENGINE 270, 607, 651 in MODEL 117 ENGINE 270, 607, 651 in MODEL 156 ENGINE 270, 607, 651 in MODEL 176 ENGINE 270, 607, 651 in MODEL 246
Detach/attach heat shield on exhaust manifold Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Drain/fill low-temperature circuit coolant Engine 176 in model 463 as of model year 2019
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 176 in model 463 as of model year 2019
Remove/install fuel tank Model 117, 156, 176, 246 with engine 270 Model 117, 156, 176, 246 with engine 607 Model 117, 156, 176, 246 with engine 651
Remove/install belt pulley/vibration damper ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install ignition coils Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install fuel injectors Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install coolant circuit feed line of turbochargers Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install oil pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install primary chain drive timing chain Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Tightening procedure for crankshaft bearing caps Engine 176, 177, 178
Remove/install circulation pump for low-temperature circuit Engine 176 in model 217, 222
Removing/installing the timing belt cover Engine 607 in model 117, 156, 176, 246
Remove/install Active Body Control hydraulic pump Model 217, 222 with engine 176 with code 487 (Active Body Control (ABC))
Remove/install left front engine support Engine 176 in model 217, 222 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Routing diagram for poly-V belt Engine 176 in model 217, 222
Remove/install the tensioning device for the oil pump chain Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Check basic position of camshafts Engine 607 in model 117, 156, 176, 246
Remove/install oil circuit return line of right turbocharger Engine 176 in model 463 as of model year 2019
Drain/fill low-temperature circuit coolant Engine 176 in model 217, 222
Mount high-pressure lines. Engine 176 in model 167 Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Disconnect connect wiring harness at alternator with tie ENGINE 133 in MODEL 117, 156, 176
Remove/install tensioning device for poly-V belt of alternator Engine 176 in model 217, 222
Remove/install camshafts of left cylinder bank Engine 176 in model 463 as of model year 2019
Remove/install right throttle valve actuator Engine 176 in model 217, 222
Remove/install right boost pressure sensor downstream of throttle valve Engine 176 in model 463 as of model year 2019
Remove/install right charge air temperature sensor downstream of throttle valve Engine 176 in model 463 as of model year 2019
Remove/install left charge air distributor Engine 176 in model 463 as of model year 2019
Remove/install oil pressure control valve on oil pump Engine 176 in model 217, 222
Remove/install oil circuit return line of left turbocharger Engine 176 in model 463 as of model year 2019
Remove/install exhaust manifold heat shield Engine 176 in model 463 as of model year 2019
Remove/install lift solenoid of left exhaust camshaft at rear Engine 176 in model 463 as of model year 2019
Remove/install left rail with fuel injectors Engine 176 in model 463 as of model year 2019
Remove/install propeller shaft Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019
Remove/install vacuum pump Model 463 with engine 176 as of model year 2019
Refrigerant compressor remove/install Model 463 with engine 176 as of model year 2019
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 176 in model 463 as of model year 2019
Detach/attach holder for camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right secondary chain drive chain tensioner Engine 176 in model 217, 222
Remove/install right turbocharger Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Position engine for removal/installation of chain tensioners Engine 176 in model 167 Engine 176 in model 463 Engine 177 in model 205 Engine 178 in model 190
Remove/install oil circuit feed line of turbochargers Engine 176 in model 463 as of model year 2019
Remove/install secondary chain drive timing chains Engine 176 in model 217, 222
Remove/install desiccant cartridge Model 463 with engine 176, 177 as of model year 2019
Remove/install oil circuit feed line of turbochargers Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install front axle gear Model 463 with engine 176, 177 as of model year 2019
Remove/install right high-pressure fuel pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Drain/pour in coolant Engine 176 in model 463 as of model year 2019
Refrigerant compressor remove/install Model 217, 222 with engine 176
Remove/install crankshaft Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install left rail with fuel injectors Engine 176 in model 217, 222
Set basic position of camshafts Engine 607 in model 117, 156, 176, 246
Automatic transmission fluid (ATF) (specification 236.21) Model 117, 118, 156, 176, 177, 242, 246, 247 with transmission 724 Model 242 with engine 780
Remove/install lift solenoid of right intake camshaft at rear Engine 176 in model 463 as of model year 2019
Remove/install coolant circuit vent line of right turbocharger Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right high-pressure fuel pump Engine 176 in model 217, 222
Remove/install turbocharger oil circuit return line Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install expansion reservoir Engine 176 in model 463 as of model year 2019
Remove/install left high-pressure fuel pump Engine 176 in model 463 as of model year 2019
Routing diagram for poly-V belt Engine 176 in model 463 Engine 177 in model 205 Engine 178 in model 190
Remove/install slide rails on primary chain drive Engine 176 in model 463 as of model year 2019
Remove/install oil sensor Engine 176 in model 463 as of model year 2019
Attach/detach engine hoist Model 217, 222 with engine 176, 177
Remove/install low-temperature circuit expansion reservoir Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install right catalytic converter Engine 176 in model 463 as of model year 2019
Remove/install catalytic converter Engine 176 in model 463 up to model year 2019
Check basic position of camshafts Engine 176 in model 217, 222
Remove/ install activated charcoal canister ENGINE 133 in MODEL 156, 176
Remove/install air duct segment of cold air intake Engine 176 in model 463 as of model year 2019
Disconnect connect wiring harness at alternator with tie Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 176 in model 463 as of model year 2019
Remove/install crankshaft Hall sensor Engine 176 in model 463 as of model year 2019
Remove/install camshaft positioner of right cylinder bank Engine 176 in model 217, 222
Remove/install fuel injectors sealing package on rail Engine 133, 139, 152.9, 157, 176, 177, 178, 254, 256, 260, 264, 270, 274, 276, 278
Remove/install rear muffler Engine 270 in model 117, 156, 176, 242, 246
Remove/install left heat shield on left turbocharger Engine 176 in model 167 Engine 176 in model 463 as of model year 2019
Remove/install left boost pressure sensor downstream of throttle valve Engine 176 in model 217, 222
Check basic position of balancing shaft ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install center exhaust system Engine 176, 177 in model 167
Drain/fill low-temperature circuit coolant Engine 176 in model 167
Remove/install left oxygen sensor downstream of catalytic converter Engine 176 in model 167
Remove/install differential lock of front axle Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Bolt plan for oil pan ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install engine with front axle carrier Engine 176 in model 167
Remove/install right oxygen sensor upstream of catalytic converter Engine 176, 177 in model 167
Seal front axle transmission Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install coolant expansion reservoir Engine 176 in model 167 Engine 177 in model 167
Remove/install radiator unit Engine 176 in model 167
Remove/install upper coolant expansion reservoir for low-temperature circuit Engine 176 in model 167
Remove/install left air filter housing Engine 176 in model 167
Remove/install right catalytic converter Engine 176, 177 in model 167
Remove/install throttle valve actuator Engine 651 in model 117, 156, 176 Engine 651 in model 246
Remove/install Lanchester balancer Engine 651 in model 117, 156, 176, 246
Remove/install coolant thermostat ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install glow plugs Engine 651 in model 117, 156, 176 Engine 651 in model 246
Remove/install intermediate gear for engine control Engine 651 in model 117, 156, 176, 246
Install drive flange onto drive pinion Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Determine gap between stator and rotor Engine 176, 177 in model 167
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 463 with engine 176 as of model year 2019 Transmission 725.0 in model 463 with engine 264 as of model year 2019
Remove/install exhaust gas recirculation actuator motor ENGINE 651 in MODEL 117, 156, 176, 246 with CODE 927 (Exhaust treatment with EURO6 technology)
Remove/install crankshaft Hall sensor Engine 176, 177 in model 167
Remove/install exhaust gas recirculation cooler ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install rear connecting flange on crankcase Engine 176, 177 in model 167
Remove/install right front engine support Engine 176, 177 in model 167
Remove/install engine from/onto front axle carrier Engine 176 in model 167
Remove/install propeller shaft Model 167 with engine 176, 177, 256.9, 264, 274
Remove/install exhaust gas recirculation valve Engine 651 in model 117, 156, 176, 246
Remove/install transfer case Transmission 725.0 in model 463 with engine 176 as of model year 2019 Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install left oxygen sensor upstream of catalytic converter Engine 176, 177 in model 167
Remove/install front axle shafts Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install integrated starter alternator control unit Engine 176, 177 in model 167
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 463 with engine 176 as of model year 2019
Remove/install camshaft Hall sensor Engine 651 in model 117, 156, 176, 246
Remove/install retaining lock for crankshaft Engine 176 in model 463 as of model year 2019
Disconnect/connect engine wiring harness to remove engine Engine 176, 177 in model 167
Remove/install front axle differential propeller shaft Model 167 with engine 176, 177, 256.9, 264, 274
Drain/pour in coolant Engine 176 in model 167
Check engine cooling system for leaktightness Engine 176 in model 167 Engine 177 in model 167
Determine oil consumption Engine 607 in model 117, 156, 176, 246 Engine 608 in model 118, 177, 247 Engine 626 in model 205 Engine 646.8 in model 204, 211 Engine 651 in model 117, 156, 166, 172, 176, 204, 205, …
Remove/install mixing chamber Engine 651 in model 117, 156, 176, 246
Remove/install transfer case absolute sensor Model 463 with engine 176 with transmission 725.0 as of model year 2019 Model 463 with engine 177 with transmission 725.0 as of model year 2019 Model 463 with engine 264 with …
Remove/install timing case cover Engine 651 in model 117, 156, 176, 246
Remove/install exhaust temperature sensor downstream of exhaust gas recirculation cooler ENGINE 651 in MODEL 117, 156, 176, 246 with CODE 927 (Exhaust treatment with EURO6 technology)
Remove/install crankshaft position sensor Engine 651 in model 117, 156, 176, 246
Remove/install engine management control unit (MCM) Engine 176, 177 in model 167
Remove/install right throttle valve actuator Engine 176 in model 167
Remove/install left radial shaft sealing ring on front axle transmission Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install exhaust gas temperature probe ENGINE 651 in MODEL 117, 156, 176, 246
Replace front crankshaft radial sealing ring Engine 651 in model 117, 156, 176, 246
Check oil level in front axle differential correct if necessary Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install right air filter housing Engine 176 in model 167
Remove/install filler neck for engine oil Engine 176 in model 167
Remove/install turbocharger Engine 651 in model 117, 156, 176, 246
Remove/install front axle shafts Model 167 with engine 176, 177, 256.9, 274 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install oil pan Engine 651 in model 117, 156, 176, 246
Remove/install hydraulic valve clearance compensating elements Engine 651 in model 117, 156, 176 Engine 651 in model 246
Remove/install oil suction pipe ENGINE 651 in MODEL 117, 156, 176, 246
Detach/attach tool for installation/removal of integrated starter alternator Engine 176, 177 in model 167
Attach/detach engine support fixture Engine 176, 177 in model 167
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 167 with engine 176, 256.9
Remove/install major assembly carrier Engine 651 in model 117, 156, 176, 246
Remove/install exhaust system Engine 176, 177 in model 167
Remove/install chain tensioner Engine 651 in model 117, 156, 176, 246
Remove/install cover on cylinder head Engine 651 in model 117, 156, 176, 246
Remove/install cylinder head cover Engine 651 in model 117, 156, 176, 246
Remove/install left water-cooled charge air cooler Engine 176 in model 167
Check oil pressure Engine 651 in model 117, 156, 176 Engine 651 in model 246
Remove/install integrated starter alternator Engine 176, 177 in model 167
Remove/install transfer case control unit Transmission 725.0 in model 463 with engine 176 as of model year 2019 Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install cylinder head Engine 651 in model 117, 156, 176, 246
Remove/install solenoid of right exhaust camshaft Engine 176 in model 463 as of model year 2019
Perform resistance measurement of coils of integrated starter alternator Engine 176, 177 in model 167
Remove/install rail ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install right water-cooled charge air cooler Engine 176 in model 167
Remove/install camshafts Engine 651 in model 117, 156, 176, 246
Check low-temperature circuit for leaktightness Engine 176 in model 167
Remove/install condenser Model 167 with engine 176, 177
Remove/install transfer case absolute sensor Model 167 with engine 176 with transmission 725.0 with code 430 (Offroad package)
Remove/install radial shaft sealing ring on drive pinion Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019
Remove/install right oxygen sensor downstream of catalytic converter Engine 176, 177 in model 167
Check basic position of camshafts ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install charge air manifold Engine 651 in model 117, 156, 176, 246
Set basic position of camshafts ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install injectors Engine 651 in model 117 Engine 651 in model 156 Engine 651 in model 176 Engine 651 in model 246
Remove/install end cover together with shaft seal Engine 651 in model 117, 156, 176, 246
Remove/install oil feed line for turbocharger Engine 651 in model 117, 156, 176, 246
Remove/install glow output stage Engine 651 in model 117, 156, 176 Engine 651 in model 246
Remove/install right fuel pressure sensor Engine 176 in model 463 as of model year 2019
Check timing chain Engine 651 in model 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 221, 222, 246, 253
Install front crankshaft radial seal Engine 651 in model 117, 156, 176, 246 Engine 651 in model 166 Engine 651 in model 172 Engine 651 in model 204 Engine 651 in model 205 Engine 651 in model 207 Engine 651 in model …
Remove/install left catalytic converter Engine 176, 177 in model 167
Remove/install front axle gear Model 167 with engine 176, 177, 256.9, 274 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Bolt plan for timing case cover ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install injection lines of common rail direct injection Engine 651 in model 117, 156, 176 Engine 651 in model 246
Remove/install coolant pump ENGINE 651 in MODEL 117, 156, 176 ENGINE 651 in MODEL 246
Set basic position of the balance shaft Engine 651 in model 117, 156, 176, 246
Remove/install right high-pressure line Engine 176 in model 463 as of model year 2019
Tightening procedure for cylinder head bolts Engine 651 in model 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 221, 222, 246, 253
Remove/install oil return flow line of turbocharger Engine 651 in model 117, 156, 176, 246
Remove/install low-temperature circuit additional radiator Engine 176, 177 in model 167
Tightening procedure of integrated starter alternator Engine 176 Engine 177 Engine 256.9
Remove/install low-pressure lines Engine 176 in model 167
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 167 with engine 176
Remove/install left boost pressure sensor upstream of throttle valve Engine 176 in model 167
Replacing rear crankshaft radial seal Engine 651 in model 117, 156, 176, 246
Remove/install crankshaft Engine 651 in model 117, 156, 176, 246
Remove/install transfer case control unit Model 167 with engine 176 with transmission 725.0 Model 167 with engine 177 with transmission 725.0
Remove/install transfer case Model 167 with engine 176 with transmission 725.0 Model 167 with engine 177 with transmission 725.0 Model 167 with engine 256.9 with transmission 725.0 Model 167 with engine 274 with …
Remove/install solenoid of right intake camshaft Engine 176 in model 463 as of model year 2019
Remove/install valves Engine 651 in model 117, 156, 176, 246
Remove oil from cooling and heating system Engine 642, 651 in model 204, 207, 212 Engine 651 in model 117, 156, 176, 246 Engine 651 in model 172 Engine 651 in model 218, 221
Remove/install rear engine support Engine 176 in model 167
Remove/install left throttle valve actuator Engine 176 in model 167
Remove/install fan unit Engine 176 in model 167
Remove/install transmission with torque converter Transmission 725.0 in model 167 with engine 176 Transmission 725.0 in model 167 with engine 177
Remove/install starter Engine 176 in model 463 as of model year 2019
Remove/install radial shaft sealing ring at output side Model 167 (except 167.148) with engine 264 with transmission 725.0 Model 167 with engine 176 with transmission 725.0 Model 167 with engine 177 with transmission 725.0 Model 167 with …
Remove/install right boost pressure sensor upstream of throttle valve Engine 176 in model 167
Remove/install oil dipstick guide tube Engine 651 in model 117, 156, 176, 246
Remove/install front engine mount Engine 176, 177 in model 167
Determine oil consumption Engine 152.9, 157, 176, 177, 178, 276, 277, 278, 279 Engine 254.9, 256.9 Engine 264 Engine 271, 272, 642, 646, 651
Remove/install coolant circuit return line of turbochargers Engine 176 in model 217, 222
Remove/install solenoids of camshafts in right cylinder head Engine 176 in model 217, 222
Remove/install oil circuit feed line of turbochargers Engine 176 in model 217, 222
Check high-pressure lines Engine 176 in model 217, 222
Remove/install solenoids of camshafts in left cylinder head Engine 176 in model 217, 222
Remove/install left high-pressure line Engine 176 in model 217, 222
Remove/install left turbocharger Engine 176 in model 217, 222
Remove/install coolant circuit feed line of turbochargers Engine 176 in model 217, 222
Remove/install right high-pressure line Engine 176 in model 217, 222
Remove/install right charge air distributor Engine 176 in model 217, 222
Service Information: Spark plug connector grease Engine 104, 111, 112, 113, 119, 120, 133, 137, 152, 155, 156, 157, 159, 166, 176, 177, 178, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 285
Remove/install coolant circuit vent line of left turbocharger Engine 176 in model 217, 222
Remove/install slide rails on secondary chain drive Engine 176 in model 217, 222
Remove/install left charge air temperature sensor downstream of throttle valve Engine 176 in model 217, 222
Remove/install right turbocharger Engine 176 in model 217, 222
Remove/install left fuel pressure sensor Engine 176 in model 217, 222
Remove/install oil circuit return line of left turbocharger Engine 176 in model 217, 222
Remove/install left charge air distributor Engine 176 in model 217, 222
Tightening procedure for charge air distributor Engine 176 in model 217, 222
Remove/install coolant thermostat ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install regulator for alternator Engine 270 in model 242 Engine 270, 607, 651 in model 117 Engine 270, 607, 651 in model 156 Engine 270, 607, 651 in model 176 Engine 270, 607, 651 in model 246
Remove/install knock sensors ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Remove/install oil filter housing ENGINE 270 in MODEL 117, 156, 176, 242, 246.2
Replace timing chain ENGINE 270.9 in MODEL 117, 156, 176, 242, 246.2
Replace full-load crankcase ventilation system Engine 270 in model 117, 156, 176, 242, 246.2 except code 494 (US version)
Remove/install oil separator Engine 270 in model 117, 156, 176, 242, 246.2 except code 494 (US version)
Test alternator charging current ENGINE 270 in MODEL 242 ENGINE 270, 607, 651 in MODEL 117, 246 ENGINE 270, 607, 651 in MODEL 156 ENGINE 270, 607, 651 in MODEL 176
Check regulator and alternator ENGINE 270 in MODEL 117, 156, 176, 242, 246 ENGINE 607 in MODEL 117, 156, 176, 246 ENGINE 651 in MODEL 117, 156, 176, 246
Test alternator diodes ENGINE 133 in MODEL 117, 176 ENGINE 133, 270, 607, 651 in MODEL 156 ENGINE 152, 276 in MODEL 172 ENGINE 270 in MODEL 242 ENGINE 270, 607, 651 in MODEL 117, 176, 246 …
Inspect cylinders with a light probe Engine 607 in model 117, 156, 176, 246 Engine 651 in model 117, 156, 176, 246
Measures set valve clearance ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install turbocharger Engine 607 in model 117, 156, 176, 246
Remove/install quantity control valve ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install high-pressure pump ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install oil feed line for turbocharger Engine 607 in model 117, 156, 176, 246
Refrigerant compressor remove/install Model 117, 156, 176, 246 with engine 607
Remove/install exhaust gas recirculation high-pressure control temperature sensor Engine 607 in model 117, 156, 176, 246
Removing and installing the timing belt tensioner Engine 607 in model 117, 156, 176, 246
Check cylinders for leaks ENGINE 607 in MODEL 117, 156, 176, 246 ENGINE 651 in MODEL 117, 156, 176, 246
Remove/install powertrain control unit ENGINE 607, 651 in MODEL 117, 156, 176, 246 with CODE 927 (EU6 emissions standard)
Remove/install hot film mass air flow sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install oil level check switch ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install exhaust gas recirculation cooler Engine 607 in model 117, 156, 176, 246
Remove/install exhaust manifold ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install oil pump Engine 607 in model 117, 156, 176, 246
Remove/install high-pressure pump’s fuel temperature sensor ENGINE 607 in MODEL 117, 156, 176, 246
Check regulator and alternator ENGINE 133 in MODEL 156, 176
Remove/install cylinder head cover Engine 607 in model 117, 156, 176, 246
Remove/install injectors Engine 607 in model 117, 156, 176, 246
Remove/install oil pan Engine 607 in model 117, 156, 176, 246
Remove/install camshaft Hall sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install exhaust gas recirculation temperature sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install rear elastomer bearing of rear axle suspension Model 117 with engine 270, 607, 651 Model 176 with engine 270, 607, 651 with code M005 (4MATIC) Model 242 Model 246 with code M005 (4MATIC)
Remove/install oxygen sensor upstream of catalytic converter Model 117, 156, 176, 246 with engine 607
Remove/install front elastomer bearing of rear axle suspension Model 117 with engine 270, 607, 651 Model 176 with engine 270, 607, 651 with code M005 (4MATIC) Model 242 Model 246 with code M005 (4MATIC)
Remove/install piston Engine 607 in model 117, 156, 176, 246
Remove/install front and rear rubber bushings in rear axle mount Model 117 with engine 270, 607, 651 Model 176 with engine 270, 607, 651 with code M005 (4MATIC) Model 242 Model 246 with code M005 (4MATIC)
Remove/install coolant thermostat ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install oil-water heat exchanger Engine 607 in model 117, 156, 176, 246
Check engine cooling system cap Engine 607 in model 117, 156, 176, 246 Engine 608 in model 177, 247
Remove/install oil return flow line of turbocharger ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install cylinder head Engine 607 in model 117, 156, 176, 246
Check and measure cup tappet Engine 607 in model 117, 156, 176, 246 Engine 608 in model 118, 177, 247
Remove/install fuel pressure sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install throttle valve actuator ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install glow plugs Engine 607 in model 117, 156, 176, 246
Remove/install crankshaft Engine 607 in model 117, 156, 176, 246
Remove/install oil dipstick guide tube ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install valves Engine 607 in model 117, 156, 176, 246
Remove/install pressure sensor Engine 607 in model 117, 156, 176, 246
Measure oil consumption Engine 607 in model 117, 156, 176, 246 Engine 626 in model 205
Check oil pressure Engine 607 in model 117, 156, 176, 246
Measure tilting and torsioning play at two-mass flywheel Engine 270 in model 117, 156, 176, 242, 246 with transmission 711.6 Engine 271 in model 171, 172, 204, 207, 212 with transmission 711.6 Engine 271 in model 171, 204, 207, 212 with …
Remove/install cylinder head cover trim panel Engine 607 in model 117, 156, 176, 246
Test alternator charging current ENGINE 133 in MODEL 156, 176
Remove/install high-pressure pump drive gear Engine 607 in model 117, 156, 176, 246
Remove/install oxygen sensor downstream of catalytic converter Model 117, 156, 176, 246 with engine 607
Remove/install glow output stage ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install engine charge air channel downstream of charge air cooler ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install leak oil line to injectors ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install coolant temperature sensor ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install charge air temperature sensor Engine 607 in model 117, 156, 176, 246
Remove/install rail ENGINE 607 in MODEL 117, 156, 176, 246
Replacing rear crankshaft radial seal Engine 607 in model 117, 156, 176, 246
Test compression pressure Engine 607 in model 117, 156, 176, 246
Remove/install injection lines of common rail direct injection Engine 607 in model 117, 156, 176, 246
Remove/install exhaust gas recirculation valve Engine 607 in model 117, 156, 176, 246
Measure vertical clearance of piston rings Engine 607 in model 117, 156, 176, 246 Engine 608 in model 118, 177, 247
Remove/install PTC heater booster heating pin ENGINE 607 in MODEL 117, 156, 176, 246
Remove/install camshafts Engine 607 in model 117, 156, 176, 246
Remove/install PTC heater booster ENGINE 607 in MODEL 117, 176, 246
Remove/install vacuum pump MODEL 117, 156, 176, 246 with ENGINE 607
Remove/install charge air ducts ENGINE 607 in MODEL 117, 156, 176, 246
Replace front radial shaft sealing ring Engine 176, 177 in model 167
Remove/install piston rings Engine 176, 177 in model 167
Remove/install left circulation pump in engine compartment for low-temperature circuit Engine 176 in model 167
Remove/install right rear engine suspension lug Engine 176 in model 167
Remove/install the tensioning device for the oil pump chain Engine 176, 177 in model 167
Remove/install hydraulic valve clearance compensating elements Engine 176, 177 in model 167
Remove/install position sensor of left cylinder bank exhaust camshaft Engine 176 in model 167
Remove/install vacuum pump Model 167 with engine 176
Crank engine with starter Engine 176, 177 in model 167
Remove/install lift solenoid of left intake camshaft at rear Engine 176 in model 167
Remove/install right turbocharger Engine 176 in model 167
Check coolant thermostat heating element Engine 176, 177 in model 167
Connect cylinder leakage testing unit Engine 176, 177 in model 167 Engine 176, 177 in model 217, 222
Remove/install oil pressure control valve on oil pump Engine 176, 177 in model 167
Remove/install coolant circuit vent line of right turbocharger Engine 176 in model 167
Remove/install left high-pressure fuel pump Engine 176 in model 167
Remove/install front cover on left cylinder head Engine 176, 177 in model 167
Remove/install left overrun mode bypass air bypass valve Engine 176 in model 167
Remove/install right charge air temperature sensor downstream of throttle valve Engine 176 in model 217, 222
Correct articulation angle of propeller shaft Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/ install activated charcoal canister Model 167 with engine 176 Model 167 with engine 177 Model 167 with engine 256.9 Model 167 with engine 264
Remove/install additional radiator Engine 176 in model 167
Check cylinders for leaks Engine 176, 177 in model 167
Remove/install coolant circuit return line of turbochargers Engine 176 in model 167
Remove/install valves Engine 176, 177 in model 167
Remove/install left fuel pressure sensor Engine 176, 177 in model 167
Remove/install coolant pump Engine 176, 177 in model 167
Replace valve stem seal Engine 176 in model 217, 222 Engine 176, 177 in model 167
Replace boot of vent line Engine 176 in model 167 except code 460 (Canada version) except code 494 (US version) Engine 177 in model 167 except code 460 (Canada version) except code 494 (US version) except …
Remove/install fuel tank Model 167 with engine 176 Model 167 with engine 256.9 Model 167 with engine 264
Remove/install coolant circuit vent line of left turbocharger Engine 176 in model 167 Engine 177 in model 167
Remove/install lift solenoid of left exhaust camshaft at front Engine 176 in model 167
Replace spark plugs Engine 176 in model 167, 217, 222 Engine 176 in model 463 Engine 177 in model 205, 213, 217, 222, 253, 290 Engine 177 in model 463
Remove/install right secondary chain drive chain tensioner Engine 176 in model 167
Remove/install left front knock sensor Engine 176, 177 in model 167
Remove/install belt pulley Engine 176 in model 167
Remove/install oil line between crankcase and oil pan Engine 176 in model 167 Engine 177 in model 167
Remove/install right charge air distributor Engine 176 in model 167
Remove/install left cylinder head Engine 176 in model 167
Remove/install right boost pressure sensor downstream of throttle valve Engine 176 in model 167
Remove/install piston Engine 176, 177 in model 167
Remove/install left gasoline particulate filter Engine 176, 177 in model 167
Removing and installing the purge valve Model 167 with engine 176
Remove/install right rear knock sensor Engine 176 in model 167 Engine 177 in model 167
Check high-pressure lines Engine 176 in model 167
Remove/install rear muffler Engine 176, 177 in model 167
Remove/install oil circuit return line of left turbocharger Engine 176 in model 167 Engine 177 in model 167
Remove/install gasoline particulate filter differential pressure sensor Model 167 with engine 176 with code 598 (Gasoline particulate filter (OPF) with sensor system)
Remove/install tensioning rails on secondary chain drive Engine 176, 177 in model 167
Remove/install rear axle differential Model 167 with engine 176 Model 167 with engine 177 Model 167 with engine 256.9 Model 167 with engine 264 Model 167 with engine 274
Remove/install left rail with fuel injectors Engine 176 in model 167
Remove/install fuel pump control unit Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install center part of oil pan Engine 176 in model 167 Engine 177 in model 167
Measure propeller shaft alignment with electronic propeller shaft inclinometer Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install right gasoline particulate filter Engine 176, 177 in model 167
Remove/install lift solenoid of right intake camshaft at rear Engine 176 in model 167
Remove/install bottom part of oil pan Engine 176 in model 167 Engine 177 in model 167
Remove/install camshafts of right cylinder bank Engine 176 in model 167
Remove/install camshaft positioner of left cylinder bank Engine 176, 177 in model 167
Remove/install right cylinder head cover Engine 176 in model 167
Remove/install left secondary chain drive chain tensioner Engine 176 in model 167
Measure oil consumption Engine 176, 177 in model 167
Remove/install primary chain drive tensioning rail Engine 176, 177 in model 167
Remove/install solenoids of camshafts in left cylinder head Engine 176, 177 in model 167
Remove/install coolant temperature sensor Engine 176 in model 167 Engine 177 in model 167
Remove/install slide rails on secondary chain drive Engine 176, 177 in model 167
Inspect cylinders with a light probe Engine 176, 177 in model 167
Remove/install boost pressure control pressure transducer Engine 176 in model 167
Remove/install left front engine support Engine 176, 177 in model 167
Remove/install electric refrigerant compressor Model 167 with engine 176
Remove/install right fuel pressure sensor Engine 176, 177 in model 167
Remove/install oil circuit return line of right turbocharger Engine 176 in model 167 Engine 177 in model 167
Remove/install right oil separator Engine 176 in model 167
Remove/install right cylinder head Engine 176 in model 167
Remove/install left charge air temperature sensor downstream of throttle valve Engine 176, 177 in model 167
Remove/install rear axle differential elastomer bearing Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install primary chain drive timing chain Engine 176, 177 in model 167
Remove/install radial shaft sealing rings on side of front axle differential Model 167 with engine 176, 177, 256.9, 274 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install position sensor of right cylinder bank intake camshaft Engine 176 in model 167
Remove/install right front knock sensor Engine 176, 177 in model 167
Remove/install front cover on right cylinder head Engine 176, 177 in model 167
Test compression pressure Engine 176, 177 in model 167
Remove/install camshaft positioner of right cylinder bank Engine 176, 177 in model 167
Remove/install radiator Engine 176, 177 in model 167
Remove/install lift solenoid of left exhaust camshaft at rear Engine 176 in model 167
Check oil pressure Engine 176 in model 167
Remove/install upper radiator shutters Engine 176, 177 in model 167 with code 9U7 (Aerodynamic measure package control code)
Remove/install right high-pressure fuel pump Engine 176 in model 167
Remove/install left turbocharger Engine 176 in model 167
Check hydraulic valve clearance compensating elements Engine 176, 177 in model 167
Remove/install right boost pressure sensor downstream of throttle valve Engine 176 in model 217, 222
Remove/install position sensor of right cylinder bank exhaust camshaft Engine 176 in model 167
Remove/install radial shaft sealing ring on drive pinion Model 167 with engine 176, 177, 256.9, 264, 274
Remove/install heat exchanger Engine 176, 177 in model 167
Measure piston ring end gap Engine 176, 177, 178
Remove/install radial shaft sealing ring of rear axle shaft on rear axle housing Model 167 with engine 176, 177, 256.9, 264, 274.9
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 176 in model 167
Remove/install primary chain drive chain tensioner Engine 176 in model 167
Remove/install lift solenoid of left intake camshaft at front Engine 176 in model 167
Remove/install left boost pressure sensor downstream of throttle valve Engine 176 in model 167
Replace radial shaft sealing ring on drive pinion Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install front axle Model 167 with engine 176, 177
Remove/install right high-pressure line Engine 176 in model 167
Remove/install lift solenoid of right exhaust camshaft at rear Engine 176 in model 167
Remove/install left high-pressure line Engine 176 in model 167
Remove/install lift solenoid of right exhaust camshaft at front Engine 176 in model 167
Remove/install lower coolant expansion reservoir for low-temperature circuit Engine 176 in model 167
Remove/install right charge air temperature sensor downstream of throttle valve Engine 176, 177 in model 167
Remove/install crankshaft Engine 176 in model 167
Remove/install right circulation pump in engine compartment for low-temperature circuit Engine 176 in model 167
Remove/install coolant line to low-temperature circuit expansion reservoir Engine 176 in model 167
Empty fuel tank on systems with faulty fuel pumps Model 167 with engine 176, 256.9, 264, 274.9
Remove/install shutoff valve Engine 176 in model 167
Remove/install left cylinder head cover Engine 176 in model 167
Empty/fill fuel tank Model 167 with engine 176, 177, 256.9, 274.9
Remove/install coolant thermostat Engine 176 in model 167
Set basic position of camshafts Engine 176 in model 167
Remove/install secondary chain drive timing chains Engine 176, 177 in model 167
Remove/install position sensor of left cylinder bank intake camshaft Engine 176 in model 167
Remove/install oil pump Engine 176, 177 in model 167
Remove/install exhaust manifold Engine 176 in model 167
Remove/install coolant circuit feed line of turbochargers Engine 176 in model 167
Remove/install low-temperature circuit cooler Engine 176, 177 in model 167
Remove/install right rail with fuel injectors Engine 176 in model 167
Remove/install slide rails on primary chain drive Engine 176, 177 in model 167
Remove/install left charge air distributor Engine 176 in model 167
Remove/install right overrun mode bypass air bypass valve Engine 176 in model 167
Remove/install fuel pump Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install oil pan Engine 176, 177 in model 167
Remove/install lift solenoid of right intake camshaft at front Engine 176 in model 167
Measure vertical clearance of piston rings Engine 176, 177, 178
Remove/install rear engine mount Engine 176, 177 in model 167
Remove/install oil circuit return line of right turbocharger Engine 176 in model 217, 222
Remove/install ignition coils of left cylinder bank Engine 176 in model 167
Remove/install engine oil fill level sensor Engine 176 in model 167 Engine 177 in model 167
Remove/install ignition coils of right cylinder bank Engine 176 in model 167
Remove/install front axle differential elastomer bearing Model 167 with engine 176, 177, 256.9 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Check basic position of camshafts Engine 176 in model 167
Remove/install valve springs Engine 176, 177 in model 167
Replace rear radial shaft sealing ring Engine 176, 177 in model 167
Remove/install solenoids of camshafts in right cylinder head Engine 176, 177 in model 167
Remove/install rear axle shaft Model 167 with engine 176 Model 167 with engine 177 Model 167 with engine 256.9 Model 167 with engine 264 Model 167 with engine 274
Remove/install camshafts of left cylinder bank Engine 176 in model 167
Remove/install oil circuit feed line of turbochargers Engine 176 in model 167
Remove/install oil pump chain Engine 176, 177 in model 167
Remove/install cover of rear axle differential Model 167 with engine 176 Model 167 with engine 256.9 except code M016 (Uprated engine) Model 167 with engine 264 Model 167 with engine 274
Remove/install left rear knock sensor Engine 176 in model 167
Remove/install left oil separator Engine 176 in model 167