Service manual Mercedes-Benz M177 Engine | Up to 2020 incl.

Pry off oil pan Engine 176, 177 in model 217, 222 Engine 177 in model 213
Remove/install lower engine compartment lining Model 118, 177, 247 with engine 260, 282 Model 118, 177, 247.7 with engine 139
Remove/install engine with transmission Engine 139 in model 118, 177, 247 with transmission 724.1
Remove/install left air filter housing Engine 177 in model 253
Pry off oil pan Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right oxygen sensor downstream of catalytic converter Engine 177 in model 213
Remove/install right oil separator Engine 177 in model 463 as of model year 2019
Remove/install rear engine support Engine 177 in model 253
Remove/install right cylinder head Engine 177 in model 253
Replace rear radial shaft sealing ring Engine 177 in model 213
Remove/install front engine mount Engine 177 in model 205
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 253 with engine 177
Remove/install wide open throttle vent line Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install left cylinder head Engine 177 in model 290
Tightening procedure for cylinder head bolts Engine 282 in model 118, 177, 247
Remove/install cylinder head Engine 654 in model 118, 177, 247
Tightening specifications for cylinder head bolts Engine 176, 177, 178
Remove/install left cylinder head Engine 177 in model 213
Engine oil and oil filter change Engine 654 in model 118, 177, 247 Engine 654 in model 205, 213, 238, 253, 257 with code M014 (Engine uprated)
Assemble/disassemble engine on engine assembly stand Engine 654 in model 118, 177, 247
Remove/install left oil separator Engine 177 in model 463 as of model year 2019
Remove/install condenser Model 205 with engine 177
Check connecting rod bolts Engine 176, 177, 178
Remove/install catalytic converters Engine 177 in model 213
Remove/install front cover on right cylinder head Engine 177 in model 253
Remove/install timing case cover Engine 282 in model 118, 177, 247
Remove/install right cylinder head cover Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Pry off oil pan Engine 176 in model 167 Engine 176 in model 463 as of model year 2019 Engine 177 in model 167 Engine 177 in model 463 as of model year 2019
Remove/install right air filter housing Engine 177 in model 253
Remove/install a flywheel Engine 177 in model 217, 222
Remove/install front cover on right cylinder head Engine 177 in model 213
Remove/install exhaust system Engine 177 in model 290
Remove/install right oxygen sensor upstream of catalytic converter Engine 177 in model 213
Remove/install right oxygen sensor downstream of catalytic converter Engine 177 in model 217, 222
Remove/install underbody paneling Model 205 Model 253 with engine 177, 264, 274, 276, 642, 651, 654, 656
Remove/install transfer case control unit Transmission 725.09 in model 253 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install front cover on left cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Prepare engine support fixture for removal of engine/transmission unit Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install oil separator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install left oxygen sensor downstream of catalytic converter Engine 177 in model 253
Remove/install engine with front axle carrier Engine 177 in model 290
Notes on sealant path for front cover to cylinder head xxx Engine 152.9, 157, 176, 177, 178, 276, 278
Remove/install center exhaust system Engine 177 in model 205
Remove/install right oil separator Engine 177 in model 290
Remove/install engine covers Engine 139 in model 118, 177, 247
Remove/install oil pan Engine 654 in model 118, 177, 247
Remove/install bottom part of oil pan Engine 177 in model 205
Replace front radial shaft sealing ring Engine 177 in model 217, 222
Remove/install radiator Engine 177 in model 213
Remove/install right rear engine suspension lug Engine 177 in model 463 as of model year 2019
Remove/install heat shield of turbocharger Engine 177 in model 213
Engine oil and oil filter change Engine 260 in model 118, 177, 247
Remove/install engine from/onto front axle carrier Engine 177 in model 213 with code M005 (4MATIC)
Remove/install left oil separator Engine 177 in model 290
Remove/install condenser Model 213 with engine 177
Remove/install oil pan Engine 177 in model 205
Remove/install low-temperature circuit radiator in wheel arch Engine 177 in model 205
Remove/install right catalytic converter Engine 177 in model 217, 222
Check main circuit coolant level Engine 177, 254, 256, 264, 274, 276.8, 642, 654, 656 in model 213
Remove/install left rear engine lifting lug Engine 177 in model 290
Pour in coolant and bleed cooling system Engine 133, 139, 152, 155, 156, 157, 159, 176, 177, 178, 260, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282 Engine 157, 176, 177, 279, 642 Engine 607, 608, 628, 629, 642, 651
Drain/fill low-temperature circuit coolant Engine 177 in model 213
Check low-temperature circuit for leaktightness Engine 177 in model 213
Replace rear radial shaft sealing ring Engine 177 in model 217, 222
Remove/install left cylinder head cover Engine 177 in model 213
General information on work on gasoline direct injection system Engine 133, 139, 152, 157, 176, 177, 178, 260, 264, 270, 274, 276, 278, 282 Engine 254.9 Engine 256.9 Engine 271.8, 272.9
Mount/remove support fixture for engine/transmission unit for repair operations Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install engine with transmission Engine 282 in model 118, 177, 247 with transmission 711.63
Remove/install transfer case temperature sensor Transmission 725.09 in model 253 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install left oxygen sensor upstream of catalytic converter Engine 177 in model 253
Remove/install timing case cover Engine 654 in model 118, 177, 247
Disconnect engine wiring harness Engine 177 in model 205
Remove/install front cover on left cylinder head Engine 177 in model 290
Tighten connecting rod bolts Engine 176, 177, 178
Remove/install transfer case temperature sensor Model 213 with engine 177 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install left oxygen sensor upstream of catalytic converter Engine 177 in model 217, 222
Remove/install engine with transmission Engine 608 in model 118, 177, 247 with transmission 711.63
Replace rear radial shaft sealing ring Engine 654 in model 118, 177, 247
Routing diagram for poly-V belt Engine 260 in model 118, 177, 247 Engine 270 in model 242 Engine 270, 651 in model 117, 156, 176, 246
Remove/install rear engine mount Engine 177 in model 217, 222
Remove/install engine with transmission Engine 654 in model 118, 177, 247 with transmission 724.1
Check coolant level in coolant expansion reservoir for cooling circuit of high-voltage battery Engine 282 in model 118.386/686, 177.086/186, 247.086/786
Remove/install left cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install rear engine mount Engine 177 in model 205
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 213 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install engine Engine 177 in model 463 as of model year 2019
Check main circuit coolant level Engine 177, 264, 274, 276, 642, 651, 654, 656 in model 253
Remove/install engine with transmission Engine 260 in model 118, 177, 247 with transmission 724.1
Drain/fill low-temperature circuit coolant Engine 177 in model 217, 222
Remove/install left cylinder head cover Engine 177 in model 217, 222
Remove/install front cover on right cylinder head Engine 177 in model 290
Remove/install balance shafts with crankshaft bearing caps Engine 654 in model 118, 177, 247
Engine oil and oil filter change Engine 282 in model 118, 177, 247
Remove/install right cylinder head Engine 177 in model 213
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 217, 222 with engine 177
Remove/install right rear engine suspension lug Engine 177 in model 290
Remove/install engine with front axle carrier Engine 177 in model 217, 222
Remove/install left cylinder head Engine 177 in model 253
Mount connecting rod bearing Engine 176, 177, 178
Check low-temperature circuit for leaktightness Engine 177 in model 217, 222
Remove/install rear engine support Engine 176 in model 463 as of model year 2019 Engine 177 in model 463 as of model year 2019
Replace rear radial shaft sealing ring Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Check main circuit coolant level Engine 139 in model 118, 177, 247
Remove/install filler neck for engine oil Engine 177 in model 463 as of model year 2019
Remove/install automatic transmission fluid cooler 29.03.2017 Transmission 722.9 in model 205 with engine 177 Transmission 722.9 in model 205 with engine 274.9 Transmission 722.9 in model 205 with engine 276 Transmission 722.9 in model 205 with engine 651
Remove/install upper coolant expansion reservoir for low-temperature circuit Engine 177 in model 253
Remove/install engine cover Engine 654 in model 118, 177, 247
Check visible area of poly-V belt for wear Model 118 with engine 260, 282, 608, 654 Model 167 with engine 264, 654, 656 Model 177 with engine 260, 282, 608, 654 Model 205 (except 205.047/053/054/147/247/253) with engine 264, …
Remove/install oil pan Engine 177 in model 463 as of model year 2019
Replace front radial shaft sealing ring Engine 177 in model 253
Remove/install left rear engine lifting lug Engine 177 in model 253
Remove/install right cylinder head Engine 177 in model 217, 222
Remove/install right oxygen sensor upstream of catalytic converter Engine 177 in model 253
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 177 in model 213
Remove/install exhaust system Engine 177 in model 253
Remove/install transmission with start-up clutch Transmission 725.06 in model 205 with engine 177
Remove/install engine with transmission Engine 177 in model 205
Check engine cooling system for leaktightness Engine 177, 264, 274, 642, 654 in model 213 Engine 264 in model 257 Engine 264, 274.9, 642, 654 in model 238
Drain/fill low-temperature circuit coolant Engine 177 in model 253
Check engine oil level with instrument cluster Engine 177 in model 253
Remove/install rear muffler Engine 177 in model 205
Remove/install bottom part of oil pan Engine 177 in model 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Bolt tightening procedure for cylinder head cover Engine 176, 177, 178
Pry off oil pan Engine 177 in model 290
Remove/install left oil separator Engine 177 in model 213
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 217, 222 with engine 177
Disconnect/connect engine wiring harness to remove engine Engine 177 in model 213
Remove/install transmission with start-up clutch Transmission 725.0 in model 217, 222 with engine 177 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install bottom part of oil pan Engine 177 in model 290
Remove/install right cylinder head cover Engine 177 in model 253
Remove/install front cover on left cylinder head Engine 177 in model 253
Open close coolant line coupling Engine 133, 139, 152, 156, 157, 159, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 622, 626, 629, 640, 642, 646, 651, 654, 656, 780
Install/measure connecting rod bearing Engine 282 in model 118, 177, 247
Check main circuit coolant level Engine 176 in model 463 as of model year 2019 Engine 177, 264, 656 in model 463
Remove/install rear engine mount Engine 177 in model 213 with code M005 (4MATIC)
Remove/install bottom part of oil pan Engine 177 in model 463 as of model year 2019
Attach/remove retaining lock for engine Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Drain/pour in coolant Engine 176, 177 in model 217, 222
Remove/install engine cover Engine 177 in model 213
Remove/install right cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install right catalytic converter Engine 177 in model 253
Notes on sealant path for cylinder head cover Engine 133, 152.9, 157, 159.9, 176, 177, 178, 260, 264, 270, 272, 273, 274, 276, 278, 282
Remove/install engine from/onto front axle carrier Engine 177 in model 290
Overview – Check engine oil level Engine 111, 112, 113, 133, 137, 139, 152, 156, 157, 159, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 285, 607, 608, 611, 612, 626, 628, 629, …
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 253 with engine 177
Oil pan bottom section tightening procedure Engine 176, 177
Remove/install right oil separator Engine 177 in model 253
Remove/install center part of oil pan Engine 177 in model 463 as of model year 2019
Check main circuit coolant level Engine 260, 282, 608, 654 in model 177
Check fuel high pressure circuit. Engine 133, 139, 152.9, 157, 176, 177, 178, 254.9, 256.9, 260, 264, 270, 274, 276, 278, 282
Remove/install transmission with start-up clutch Transmission 722.93 in model 205 with engine 177
Remove/install a flywheel Engine 177 in model 253
Remove/install left oxygen sensor downstream of catalytic converter Engine 177 in model 213
Remove/install engine management control unit (MCM) Engine 177 in model 217, 222
Mount/remove support fixture for removal of engine/transmission unit Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install starter Engine 177 in model 253
Remove/install piston Engine 654 in model 118, 177, 247
Remove/install right oil separator Engine 177 in model 217, 222
Prepare engine support fixture during repair work in vehicle Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install left cylinder head cover Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Relieve fuel pressure Engine 133, 139, 152.9, 157, 176, 177, 178, 254.9, 256, 260, 264, 270, 274, 276, 278, 282
Damage profiles for a poly-V belt Engine 102, 103, 104, 111, 112, 113, 119, 120, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 254, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 281, 282, 285, …
Attach/detach engine hoist Model 205 with engine 177 Model 205, 253 with engine 274, 276.8
Remove/install front cover on left cylinder head Engine 177 in model 213
000 588 07 19 00 Measuring instrument Model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) Model 167.117/154/317/354 Model 293 Model 447 with engine 780.701/702 Model 910 with …
Remove/install engine from/onto front axle carrier Engine 177 in model 217, 222
Remove/install heat shield of turbocharger Engine 177 in model 217, 222
Remove/install left cylinder head cover Engine 177 in model 253
Remove/install right cylinder head Engine 177 in model 290
Engine oil and oil filter change Engine 139 in model 118, 177, 247
Oil pan tightening procedure Engine 654 in model 118, 177, 247
Remove/install left catalytic converter Engine 177 in model 253
Remove/install cylinder head Engine 282 in model 118, 177, 247
Remove/install left oil separator Engine 177 in model 217, 222
Remove/install engine from/onto front axle carrier Engine 177 in model 253
Remove/install front cover on right cylinder head Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 177 in model 290
Remove/install engine with transmission Engine 654 in model 118, 177, 247 with transmission 711.63
Remove/install flywheel / drive plate Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install oil pan Engine 177 in model 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install left cylinder head Engine 177 in model 463 as of model year 2019
Open and close coupling Engine 133, 139, 152, 156, 157, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 626, 629, 640, 642, 646, 651, 654, 656, 780
Bolt tightening procedure for cylinder head cover Engine 133 in model 117, 156, 176 Engine 260 in model 118, 177, 247 Engine 270 in model 117, 156, 176, 242, 246.2
Remove/install transfer case oil cooler Model 213 with engine 177 with transmission 725.0 with code M005 (4MATIC)
Remove/install lower engine compartment lining Model 118 with engine 608, 654 Model 177 with engine 608, 654 Model 247 with engine 608, 654
Remove/install engine with automatic transmission Engine 282 in model 118, 177, 247 with transmission 724.1 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install radiator ENGINE 177 in MODEL 205
Check main circuit coolant level Engine 157, 176, 177, 256.9, 264, 276, 277, 278, 279, 642, 651, 656 in model 222 Engine 157, 176, 177, 276.8, 278, 279 in model 217
Engine oil and oil filter change Engine 177 in model 205, 253
Check main circuit coolant level Engine 177, 256.9 in model 290
Remove/install right cylinder head cover Engine 177 in model 463 as of model year 2019
Remove/install oil pan Engine 177 in model 217, 222 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Align clamp between turbocharger and catalytic converter Engine 177 in model 167 Engine 177 in model 213 Engine 177 in model 217, 222 Engine 177 in model 290 Engine 177 in model 463
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 177 in model 213
Remove/install left catalytic converter Engine 177 in model 217, 222
Notes on avoiding damage to ignition system Engine 133, 139, 152.9, 157, 176, 177, 178, 256.9, 260, 270, 273, 274, 276, 278, 282 Engine 254.9 in model 213 Engine 264 in model 167, 205, 213, 222, 238, 253, 257 Engine 264 in model …
Tightening procedure for center part of oil pan Engine 176 in model 167 Engine 176, 177 in model 463 as of model year 2019 Engine 177
Remove/install left cylinder head cover Engine 177 in model 463 as of model year 2019
Remove/install bottom part of oil pan Engine 177 in model 213
Remove/install cap with front radial shaft sealing ring Engine 654 in model 118, 177, 247
Remove/install left cylinder head Engine 177 in model 217, 222
Remove/install transmission with start-up clutch Transmission 725.09 in model 213 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install filler neck for engine oil Engine 177 in model 290
Remove/install starter Engine 177 in model 217, 222
Remove/install rear engine support Engine 176, 177 in model 217, 222 Engine 656 in model 222
Remove/install left oxygen sensor downstream of catalytic converter Engine 177 in model 217, 222
Check main circuit coolant level Engine 177, 264, 274, 276, 626, 651, 654 in model 205
Remove/install bottom part of oil pan Engine 282 in model 118, 177, 247
Remove/install fanfare horns MODEL 205 with ENGINE 177
Align clamp between turbocharger and catalytic converter Engine 176 in model 463 Engine 177 in model 205 Engine 177 in model 253 Engine 178 in model 190
Replace front radial shaft sealing ring Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Replace front radial shaft sealing ring Engine 282 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 177 in model 290
Notes on distribution of sealant on crankcase end cover Engine 176 in model 167, 217, 222, 223 Engine 176 in model 463 Engine 177 Engine 178 in model 190
Remove/install bottom part of oil pan Engine 177 in model 217, 222 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install left cylinder head cover Engine 177 in model 290
Check low-temperature circuit for leaktightness Engine 177 in model 253
Engine oil and oil filter change Engine 177 in model 213, 217, 222, 290
Remove/install engine with transmission Engine 282 in model 118, 177, 247 with transmission 700.42
Remove/install front cover on right cylinder head Engine 177 in model 217, 222
Remove/install right rear engine suspension lug Engine 177 in model 253
Check main circuit coolant level Engine 176, 177, 256, 264, 274, 654, 656 in model 167
Remove/install rear engine mount Engine 177 in model 253
Remove/install oil pan Engine 177 in model 290
Remove/install radiator Engine 177 in model 253
Attach/detach engine support fixture Engine 176, 177 in model 463 as of model year 2019
Remove/install engine covers Engine 177 in model 167, 290
Inspect cooling system for leaks Engine 177, 264, 274.9, 276.8, 626, 651, 654 in model 205 Engine 264, 274.9, 276.8, 642, 651, 654, 656 in model 253
Overview of service intervals for gasoline engines depending on engine oil specification Engine 111, 112, 113, 132, 133, 137, 152, 156, 157, 159, 177, 178, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 281, 285 Engine 112, 113, 157, 273, 279 in model 463
Remove/install transfer case control unit Model 213 with engine 177 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install oil pan Engine 177 in model 213 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install transfer case control unit Transmission 725.09 in model 217, 222 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install front cover on left cylinder head Engine 177 in model 463 as of model year 2019
Check engine oil level using on-board oil dipstick Engine 111, 112, 113, 133, 152, 156, 157, 177, 178, 266, 270, 271, 272, 273, 274, 276.8/9, 278, 279, 607, 611, 612, 626, 628, 629, 640, 642, 646, 651
Check low-temperature circuit coolant level Engine 176 in model 167, 217, 222 Engine 176, 177 in model 463 Engine 177 in model 167, 205, 213, 217, 222, 253, 290
Remove/install right inerting system line in engine compartment 10.01.2019 Model 205, 213, 253 with engine 264, 274, 276 with code 2U8 (Alternative refrigerant) Model 205, 253 with engine 177 with code 2U8 (Alternative refrigerant) Model 238 with engine 264, 274, 276 with code 2U8 (Alternative refrigerant) Model 257 with engine 264 with code 2U8 (Alternative refrigerant)
Remove/install air filter housing Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Inspect cooling system for leaks Model 217 with engine 157, 176, 177, 276, 278, 279 Model 222 with engine 157, 176, 177, 256, 264, 276.8/9, 277, 278, 279, 642, 651, 656
Remove/install filler neck for engine oil Engine 177 in model 213
Remove/install right cylinder head cover Engine 177 in model 213
Remove/install left oil separator Engine 177 in model 253
Remove/install left turbocharger Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install rear engine support Engine 177 in model 213 with code M005 (4MATIC)
Engine oil and oil filter change Engine 608 in model 118, 177, 247
Remove/install cylinder head cover Engine 654 in model 118, 177, 247
Replace rear radial shaft sealing ring Engine 177 in model 253
Engine overview – Oil and filter change Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 197.3/4, 204, 205, 207, 212, 213, 216, 217, 218, 221, 222, 223, 231, 238, 242, 246, 247, 253, 257, 290, 292, 293, 461, 463
Remove/install oil lines of oil cooling for automatic transmission Transmission 722.93 in model 205 with engine 177
Service Information: Engine oil change Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 197, 199, 204, 205, 207, 212, 213, 217, 218, 222, 231, 238, 242, 246, 247, 253, 257, 292, 451, 453 Model 164.1## #A as of 193232 Model …
Remove/install rear cover on cylinder head Engine 654 in model 118, 177, 247
Remove/install right cylinder head cover Engine 177 in model 217, 222
Overview of service intervals for gasoline engines depending on engine oil specification Engine 111, 112, 113, 132, 133, 137, 152, 156, 157, 159, 177, 178, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 281, 285 Engine 112, 113, 157, 273, 279 in model 463
Remove/install exhaust system Engine 177 in model 213
Remove/install left oxygen sensor upstream of catalytic converter Engine 177 in model 213
Remove/install condenser Model 253 with engine 177
Remove/install engine with transmission Engine 608 in model 118, 177, 247 with transmission 700.42
Remove/install rear engine support Engine 177 in model 205
Tightening procedure for oil pan bolts Engine 282 in model 118, 177, 247
Remove/install radiator Engine 177 in model 290
Empty/fill AdBlue(R) tank Engine 608 in model 118, 177, 247 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3)
Remove/install full-load crankcase ventilation system Engine 260 in model 118, 177, 247 except code M016 (Uprated engine)
Remove/install right cylinder head cover Engine 177 in model 290
Remove/install engine with front axle carrier Engine 177 in model 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install transfer case Transmission 725.09 in model 217, 222 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install front cover on right cylinder head Engine 177 in model 463 as of model year 2019
Remove/install filler neck for engine oil Engine 177 in model 253
Remove/install lower crankcase section at removed engine Engine 654 in model 118, 177, 247
Check engine oil level with instrument cluster Engine 260, 282, 608, 654 in model 118 Engine 260, 282, 608, 654 in model 177 Engine 260, 282, 608, 654 in model 247
Remove/install oil pan Engine 282 in model 118, 177, 247
Empty/fill AdBlue(R) tank Engine 654 in model 118, 177, 247
Remove/install engine with front axle carrier Engine 177 in model 213 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install engine cover Engine 177 in model 463 as of model year 2019
Replace front radial shaft sealing ring Engine 177 in model 290
Remove/install exhaust system Engine 177 in model 217, 222
General information on inspecting cylinder walls Engine 133, 139, 156, 176, 177, 178, 254, 256.9, 276.8, 654, 656 Engine 159
Remove/install transmission with start-up clutch Transmission 725.0 in model 217, 222 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Notes on the assessment of pistons and piston rings Engine 111, 112, 113, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 285 Engine 112, 113, 157, …
Check all visible parts in engine compartment for damage and fluid loss Model 118, 177, 247
Replace rear radial shaft sealing ring Engine 282 in model 118, 177, 247
Drain/pour in coolant Engine 177, 274.9, 276.8, 626, 651 in model 205 Engine 274.9, 276.8, 651 in model 253
Remove/install transfer case temperature sensor Transmission 725.09 in model 217, 222 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install condenser Model 290 with engine 177
Remove/install front cover on left cylinder head Engine 177 in model 217, 222
Remove/install oil pan Engine 177 in model 217, 222 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install right cylinder head Engine 177 in model 463 as of model year 2019
Remove/install center exhaust system Engine 177 in model 217, 222
Check engine oil level with instrument cluster Engine 139 in model 118, 177, 247
Remove/install rear engine support Engine 177 in model 290
Remove/install intelligent servo module Transmission 722.9 in model 205 with engine 274 Transmission 722.9 in model 205 with engine 276 Transmission 722.93 in model 205 with engine 177
Remove/install filler neck for engine oil Engine 177 in model 217, 222
Replace front radial shaft sealing ring Engine 177 in model 463 as of model year 2019
Remove/install engine with transmission Engine 282 in model 118, 177, 247 with transmission 724.1 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install front axle differential propeller shaft 18.03.2020 Model 217, 222 with engine 176, 278 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 217, 222 with engine 177 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 217, 222 with transmission 722.96/97 Model 222 with engine 276 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 222 with engine 642, 656 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Replace front radial shaft sealing ring Engine 177 in model 213
Remove/install transfer case oil cooler Transmission 725.09 in model 217, 222 with engine 177 with code M005 (4MATIC)
Notes on coolant Engine 100, 102, 103, 104, 110, 111, 112, 113, 114, 115, 116, 117, 119, 120, 121, 123, 127, 129, 130, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 180, 254, 256, 260, 264, 266, …
Pry off oil pan Engine 177 in model 253
Tightening procedure for crankcase bottom section Engine 654 in model 118, 177, 247
Remove/install right rear engine suspension lug Engine 177 in model 213 Engine 177 in model 217, 222
Firing order Engine 133, 139, 152.9, 157, 176, 177, 260, 270, 274, 276, 278, 282
Remove/install right oxygen sensor upstream of catalytic converter Engine 177 in model 217, 222
Tightening procedure for cylinder head bolts Engine 176, 177, 178
Notes on sealant path for oil pan Engine 133, 152.9, 157, 256.9, 260, 264, 270, 274, 276, 278, 282 Engine 176 in model 217, 222, 223 Engine 176, 177 in model 167 Engine 177 in model 205, 213 Engine 177 in model 217, …
Remove/install piston rings Engine 282 in model 118, 177, 247
Remove/install right oxygen sensor downstream of catalytic converter Engine 177 in model 253
Check engine oil level with instrument cluster Engine 177 in model 167, 213, 217, 222, 290 Engine 177 in model 463
Remove/install right oil separator Engine 177 in model 213
Engine oil and oil filter change Engine 177 in model 167 Engine 177 in model 463
Tightening procedure for charge air manifold Engine 133 in model 117, 156, 176 Engine 260 in model 118, 177, 247 Engine 270 in model 117, 156, 176, 242, 246.2
Drain/fill low-temperature circuit coolant Engine 177 in model 205
Remove/install desiccant cartridge Model 290 with engine 177
Remove/install transmission with start-up clutch Transmission 725.0 in model 253 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install tensioning device for poly-V belt of alternator Engine 177 in model 463 as of model year 2019
Remove/install left low-pressure line Engine 177 in model 463 as of model year 2019
Remove/install washer fluid reservoir of windshield washer system Model 118, 177, 247.7 with engine 139
Tightening procedure for charge air distributor Engine 177 in model 290
Remove/install starter Engine 260 in model 118, 177, 247
Remove/install left front engine support Engine 177 in model 205
Remove/install left turbocharger Engine 177 in model 213
Remove/install lower engine stabilizer mount Engine 608, 654 in model 118, 177, 247
Remove/install boost pressure sensor upstream of throttle valve ENGINE 177 in MODEL 205
Remove/install vacuum pump Model 217, 222 with engine 177
Remove/install primary chain drive tensioning rail Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install coolant line to low-temperature circuit expansion reservoir Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install exhaust system Engine 654 in model 118, 177, 247
Reduce fuel pressure through service valve Engine 176, 177 in model 167 Engine 176, 177 in model 217, 222
Remove/install condenser Engine 654 in model 118, 177, 247
Remove/install engine hood catch Model 118, 177, 247
Remove/install starter Engine 608 in model 118, 177, 247
Remove/install high-voltage components coolant radiator Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Camshaft bearing bridge sealant path Engine 176, 177, 178 Engine 176, 177
Remove/install low-pressure lines Engine 177 in model 213
Slacken tension poly-V belt Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install hydraulic valve play compensation elements Engine 177 in model 253
Remove/install left air filter housing Engine 177 in model 290
Remove/install oil sensor Engine 177 in model 463 as of model year 2019
Remove/install left throttle valve actuator Engine 177 in model 253
Remove/install flywheel / drive plate Engine 282 in model 118, 177, 247 with transmission 724.1
Remove/install upper engine stabilizer mount Engine 654 in model 118, 177, 247
Remove/install right air filter housing Engine 177 in model 290
Remove/install exhaust gas temperature sensor upstream of diesel particulate filter Engine 608 in model 118, 177, 247
Remove/install camshaft positioner of right cylinder bank Engine 177 in model 290
Apply alignment marks to belt pulley of crankshaft Engine 176 in model 463 up to model year 2019 Engine 176, 177 in model 167 Engine 177 in model 205 Engine 178 in model 190
Remove/install lift solenoid of right intake camshaft at front Engine 177 in model 213
Remove/install camshaft sprockets Engine 654 in model 118, 177, 247
Unlock/lock high-voltage disconnect device Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install transmission with torque converter Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install vacuum pump Model 118, 177, 247 with engine 608
Remove/install right catalytic converter Engine 177 in model 463 as of model year 2019
Remove/install inertization system line in engine compartment Model 118, 177, 247 with engine 260 with code 2U8 (Alternative refrigerant)
Check air conditioning system for leakage Model 118 with engine 139, 260, 282, 608, 654 Model 177 with engine 139, 260, 282, 608, 654 Model 247 with engine 260, 282, 608, 654 Model 247.7 with engine 139
Remove/install left turbocharger Engine 177 in model 217, 222
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 177 in model 253
Remove/install left water-cooled charge air cooler Engine 177 in model 205
Remove/install position sensor of left cylinder bank exhaust camshaft Engine 177 in model 290
Remove/install desiccant cartridge Model 118, 177, 247 with engine 139
Remove/install secondary chain drive timing chains Engine 177 in model 213
Remove/install oil circuit feed line of turbochargers Engine 177 in model 213
Remove/install position sensor of left cylinder bank exhaust camshaft Engine 177 in model 463 as of model year 2019
Remove/install crankshaft Hall sensor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install crankshaft Engine 177 in model 463 as of model year 2019
Remove/install condenser Model 217, 222 with engine 176 Model 217, 222 with engine 177 Model 222 with engine 656
Inspect cooling system for leaks Engine 608, 654 in model 118, 177, 247
Remove/install belt pulley Engine 177 in model 290
Remove/install left high-pressure line Engine 177 in model 213
Remove/install left catalytic converter Engine 177 in model 290
Remove/install oil pump chain Engine 177 in model 463 as of model year 2019
Reduce fuel pressure through service valve Engine 177 in model 213, 290
Remove/install low-temperature circuit switchover valve mounting support Engine 177 in model 463 as of model year 2019
Remove/install tensioning rails on secondary chain drive Engine 177 in model 253
Remove/install lift solenoid of right exhaust camshaft at rear Engine 177 in model 290
Remove/install low-temperature circuit coolant expansion reservoir holder Engine 177 in model 213
Remove/install inertization system line in engine compartment Model 213 with engine 177
Remove/install right boost pressure sensor downstream of throttle valve Engine 177 in model 253
Remove install timing chain Engine 282 in model 118, 177, 247
Remove/install guide pulley for poly-V belt of alternator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right secondary chain drive chain tensioner Engine 177 in model 253
Bleed clutch operating system Model 118, 177, 247 with engine 282 with transmission 711.6 Model 118, 177, 247 with engine 608 with transmission 711.6 Model 118, 177, 247 with engine 654 with transmission 711.6
Remove/install secondary chain drive timing chains Engine 177 in model 217, 222
Remove/install drive plate Engine 177 in model 463 as of model year 2019
Check crankshaft in removed state Engine 176, 177, 178
Remove/install left exhaust manifold Engine 177 in model 290
Remove/install crankshaft Hall sensor Engine 177 in model 253
Remove/install coolant circuit vent line of right turbocharger Engine 177 in model 213
Remove/install high-pressure exhaust gas recirculation cooler Engine 654 in model 118, 177, 247
Remove/install coolant pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install engine oil fill level sensor Engine 177 in model 213
Remove/install slide rails on primary chain drive Engine 177 in model 290
Remove/install lift solenoid of right intake camshaft at front Engine 177 in model 290
Remove/install coolant thermostat Engine 177 in model 217, 222
Check basic position of camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install vibration damper Engine 177 in model 463 as of model year 2019
Remove/install position sensor of left cylinder bank intake camshaft Engine 177 in model 463 as of model year 2019
Slacken poly-V-belt Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install right catalytic converter Engine 177 in model 290
Remove/install oil pump Engine 177 in model 217, 222
Remove/install primary chain drive tensioning rail Engine 177 in model 253
Remove/install guide tube for oil dipstick Engine 177 in model 205
Remove/install ignition coils of right cylinder bank Engine 177 in model 463 as of model year 2019
Remove/install low-pressure exhaust gas recirculation cooler Engine 654 in model 118, 177, 247
Remove/install oil circuit return line of right turbocharger Engine 177 in model 463 as of model year 2019
Remove/install upper guide pulley for poly-V belt of refrigerant compressor Engine 177 in model 205
Remove/install hydraulic valve clearance compensating elements Engine 177 in model 463 as of model year 2019
Remove/install valves Engine 654 in model 118, 177, 247
Remove/install position sensor of left cylinder bank intake camshaft Engine 177 in model 290
Remove/install solenoid of left intake camshaft Engine 177 in model 253
Remove/install diesel fuel injection system control unit Engine 608 in model 118, 177, 247
Remove/install vacuum pump Model 463 with engine 177 as of model year 2019
Remove/install right boost pressure sensor upstream of throttle valve Engine 177 in model 213
Remove/install coolant expansion reservoir Engine 608 in model 118, 177, 247
Remove/install oxygen sensors Engine 177 in model 205
Remove/install left rail with fuel injectors Engine 177 in model 463 as of model year 2019
Remove/install starter Engine 177 in model 290
Remove/install tensioning rails on secondary chain drive Engine 177 in model 213
Remove/install upper slide rail Engine 654 in model 118, 177, 247
Remove/install left front engine support Engine 177 in model 253
Remove/install coolant circuit feed line of turbochargers Engine 177 in model 463 as of model year 2019
Remove/install oil suction pipe Engine 654 in model 118, 177, 247
Remove/install right rail with fuel injectors Engine 177 in model 463 as of model year 2019
Remove/install alternator belt pulley Engine 177 in model 290
Deenergize high-voltage on-board electrical system/put high-voltage on-board electrical system into operation Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install left high-pressure fuel pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install air intake duct upstream of turbocharger Engine 654 in model 118, 177, 247
Remove/install tensioning rails on secondary chain drive Engine 177 in model 290
Remove/install primary chain drive chain tensioner Engine 177 in model 463 as of model year 2019
Remove/install right secondary chain drive chain tensioner Engine 177 in model 463 as of model year 2019
Remove/install camshafts of left cylinder bank Engine 177 in model 213
Remove/install engine oil temperature sensor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install transmission with start-up clutch Transmission 725.0 in model 290 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install coolant circuit return line of turbochargers Engine 177 in model 290
Remove/install low-temperature circuit expansion reservoir Engine 177 in model 463 as of model year 2019
Remove/install left charge air distributor Engine 177 in model 463 as of model year 2019
Replace fuel injector sealing ring Engine 133, 139, 152.9, 157, 176, 177, 178, 254, 256, 260, 264, 270, 274, 276, 278
Remove/install left oxygen sensor downstream of catalytic converter Engine 177 in model 290
Remove/install right charge air distributor Engine 177 in model 463 as of model year 2019
Tightening procedure for charge air distributor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Release fuel pressure through service connection Engine 177 in model 290
Remove/install flywheel / drive plate Engine 282 in model 118, 177, 247 with transmission 711.63
Remove/install left secondary chain drive chain tensioner Engine 177 in model 463 as of model year 2019
Remove/install left boost pressure sensor upstream of throttle valve Engine 177 in model 213
Remove/install slide rails on secondary chain drive Engine 177 in model 290
Remove/install slide rails on primary chain drive Engine 177 in model 213
Remove/install belt pulley/vibration damper Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install ignition coils of left cylinder bank Engine 177 in model 217, 222
Remove/install right turbocharger Engine 177 in model 213
Remove/install low-pressure exhaust gas recirculation valve Engine 608 in model 118, 177, 247
Remove/install coolant thermostat Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Drain/pour in coolant Engine 608 in model 118, 177, 247
Check high-pressure lines Engine 177
Refrigerant compressor remove/install Engine 177 in model 205 Engine 177 in model 213 except code 1U6 (R744 refrigerant)
Remove/install clutch Model 118, 177, 247 with engine 282 with transmission 711.63 Model 118, 177, 247 with engine 608 with transmission 711.63 Model 118, 177, 247 with engine 654 with transmission 711.63
Remove install engine charge air channel at turbocharger Engine 654 in model 118, 177, 247
Remove/install slide rails on primary chain drive Engine 177 in model 463 as of model year 2019
Remove/install sensor unit of temperature sensors Engine 654 in model 118, 177, 247
Remove/install primary chain drive tensioning rail Engine 177 in model 213
Remove/install the tensioning device for the oil pump chain Engine 177 in model 253
Remove/install engine oil fill level sensor Engine 177 in model 290
Remove/install hydraulic valve play compensation elements Engine 177 in model 290
Drain/fill low-temperature circuit coolant Engine 177 in model 463 as of model year 2019
Remove/install right heat shield on right turbocharger Engine 177 in model 253
Determine crankshaft bearing axial play Engine 176, 177, 178, 254, 256
Remove/install coolant thermostat Engine 177 in model 290
Remove/install left charge air distributor Engine 177 in model 253
Remove/install front end crossmember Model 213 with engine 177
Remove/install left fuel pressure sensor Engine 177 in model 253
Remove/install additional engine radiator Engine 177 in model 217, 222
Set basic position of camshafts Engine 654 in model 118, 177, 247
Remove/install retaining lock for crankshaft/ring gear Engine 282 in model 118, 177, 247
Remove/install left heat shield on left turbocharger Engine 177 in model 463 as of model year 2019
Remove/install alternator belt pulley Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190 Engine 279 in model 463
Manually deenergize high-voltage on-board electrical system form Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install desiccant cartridge Model 118 with engine 260, 282 with code 2U8 (Alternative refrigerant) Model 177 with engine 260, 282 with code 2U8 (Alternative refrigerant) Model 247 with engine 260, 282 with code 2U8 …
Remove/install boost pressure sensor downstream of throttle valve Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install oil pan noise encapsulation Model 118, 177, 247 with engine 608
Remove/install right fuel pressure sensor Engine 177 in model 253
Remove/install fan unit Engine 177 in model 253
Remove/install fan unit Engine 608 in model 118, 177, 247
Check alternator Engine 177 in model 213
Remove/install low-temperature circuit expansion reservoir Engine 177 in model 290
Remove/install front module Model 118, 177, 247.0 with engine 260, 282, 608, 654
Remove/install crankshaft Hall sensor Engine 177 in model 217, 222
Remove/install differential pressure sensor Engine 608 in model 118, 177, 247
Remove/install ignition coils of left cylinder bank Engine 177 in model 290
Remove/install charge air distributor Engine 177 in model 205
Remove/install ignition coils of right cylinder bank Engine 177 in model 290
Remove/install left charge air temperature sensor downstream of throttle valve Engine 177 in model 290
Remove/install left water-cooled charge air cooler Engine 177 in model 253
Remove/install camshafts of left cylinder bank Engine 177 in model 217, 222
Remove/install charge air pipe from charge air cooler to charge air distributor Engine 260 in model 118, 177, 247 except code M016 (Uprated engine)
Remove/install temperature sensor for low-pressure exhaust gas recirculation Engine 608 in model 118, 177, 247
Remove/install powertrain control unit Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install right boost pressure sensor downstream of throttle valve Engine 177 in model 217, 222
Remove/install right high-pressure fuel pump Engine 177 in model 213
Remove/install tensioning rails on secondary chain drive Engine 177 in model 463 as of model year 2019
Remove/install camshaft positioner of left cylinder bank Engine 177 in model 213
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 213
Remove/install left rail with fuel injectors Engine 177 in model 253
Remove/install belt pulley/vibration damper Engine 177 in model 217, 222
Set basic position of camshafts Engine 177 in model 463 as of model year 2019
Remove/install exhaust manifold Engine 177 in model 463 as of model year 2019
Remove/install exhaust aftertreatment unit Engine 608 in model 118, 177, 247
Drain/fill low-temperature circuit coolant Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install engine intake air duct downstream of air filter Engine 282 in model 118, 177, 247
Manually check high-voltage on-board electrical system for absence of voltage Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install liquid-cooled charge air cooler Engine 608 in model 118, 177, 247
Remove/install left charge air distributor Engine 177 in model 290
Fill AdBlue(R) tank Engine 654 in model 118, 177, 247 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3)
Drain/pour in coolant Engine 654 in model 118, 177, 247
Remove/install position sensor of right cylinder bank intake camshaft Engine 177 in model 290
Remove/install camshafts of right cylinder bank Engine 177 in model 213
Remove/install upper engine stabilizer mount Engine 282 in model 118, 177, 247
Remove/install slide rails on secondary chain drive Engine 177 in model 253
Remove/install oil circuit return line of left turbocharger Engine 177 in model 463 as of model year 2019
Remove/install slide rails on primary chain drive Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install starter Engine 177 in model 463 as of model year 2019
Remove/install inertization system line in engine compartment Model 290 with engine 177 with code 2U8 (Alternative refrigerant)
Remove/install camshafts of right cylinder bank Engine 177 in model 290
Remove/install refrigerant compressor poly-V-belt Engine 177 in model 213
Remove/install oil circuit return line of right turbocharger Engine 177 in model 217, 222
Refrigerant compressor remove/install Engine 260 in model 118, 177, 247 Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install circulation pumps for low-temperature circuit Engine 177 in model 213
Remove/install right water-cooled charge air cooler Engine 177 in model 205
Remove/install air duct segment of cold air intake Engine 177 in model 463 as of model year 2019
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 463 as of model year 2019
Remove/install the tensioning device for the oil pump chain Engine 177 in model 290
Remove/install right air filter housing Engine 177 in model 213
Remove/install refrigerant compressor poly-V-belt Engine 177 in model 217, 222
Set basic position of camshafts Engine 177 in model 290
Tightening procedure for exhaust manifold Engine 176 Engine 177 Engine 178
Remove/install right rail with fuel injectors Engine 177 in model 290
Remove/install right secondary chain drive chain tensioner Engine 177 in model 213
Remove/install left circulation pump in wheel arch for low-temperature circuit Engine 177 in model 290
Remove/install left high-pressure fuel pump Engine 177 in model 253
Remove/install secondary chain drive timing chains Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install low-pressure lines Engine 177 in model 217, 222
Remove/install right inerting system line in engine compartment Model 217 with engine 157, 176, 177, 276, 278, 279 with code 2U8 (Alternative refrigerant) Model 222 with engine 157, 176, 177, 256, 276, 277, 278, 279 with code 2U8 (Alternative refrigerant)
Set engine at cylinder 1 to 40 degrees after top dead center Engine 176 Engine 177 in model 205, 253 Engine 178
Remove/install left heat shield on left turbocharger Engine 177 in model 213
Remove/install right secondary chain drive chain tensioner Engine 177 in model 290
Remove/install camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install primary chain drive timing chain Engine 177 in model 463 as of model year 2019
Remove/install front axle differential propeller shaft Model 290 with engine 177 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install right exhaust manifold Engine 177 in model 217, 222
Remove/install front axle differential propeller shaft Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019
Remove/install engine oil cooler Engine 177 in model 205
Remove/install engine intake air duct downstream of air filter Engine 608 in model 118, 177, 247
Remove/install right exhaust manifold Engine 177 in model 213
Remove/install the tensioning device for the oil pump chain Engine 177 in model 217, 222
Remove/install exhaust manifold heat shield Engine 176 in model 167 Engine 176 in model 217, 222 Engine 177
Remove/install center exhaust system Engine 177 in model 253
Remove/install slide rails on secondary chain drive Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove injection nozzles Engine 133, 139, 152.9, 157, 176, 177, 178, 254, 256, 260, 264, 270, 274, 276, 278
Remove/install belt pulley/vibration damper Engine 282 in model 118, 177, 247
Remove/install guide pulley for poly-V belt of alternator Engine 177 in model 463 as of model year 2019
Remove/install additional engine radiator Engine 177 in model 253
Remove/install flywheel / drive plate Engine 654 in model 118, 177, 247
Drain/fill low-temperature circuit coolant Engine 177 in model 290
Remove/install left turbocharger Engine 177 in model 463 as of model year 2019
Check low-temperature circuit for leaktightness Engine 176 in model 463 as of model year 2019 Engine 177 in model 463 as of model year 2019
Remove/install air filter housing Engine 282 in model 118, 177, 247
Remove/install low-pressure lines Engine 177 in model 290
Remove/install retaining lock for crankshaft Engine 654 in model 118, 177, 247
Remove/install tensioning device for poly-V belt of alternator Engine 177 in model 290
Remove/install tensioning device for poly-V belt of alternator Engine 177 in model 253
Remove/install left front engine support Engine 177 in model 463 as of model year 2019
Remove/install throttle valve actuator Engine 608 in model 118, 177, 247
Remove/install coolant circuit vent line of right turbocharger Engine 177 in model 217, 222
Remove/install low-temperature circuit coolant expansion reservoir holder Engine 177 in model 463 as of model year 2019
Remove/install left rail Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install ignition coils of left cylinder bank Engine 177 in model 463 as of model year 2019
Remove/install coolant circuit return line of turbochargers Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install ignition coils of right cylinder bank Engine 177 in model 213
Remove/install alternator Engine 177 in model 213
Remove/install tensioning device for poly-V belt of alternator Engine 177 in model 213
Set basic position of camshafts Engine 177 in model 213
Remove/install lift solenoid of left exhaust camshaft at rear Engine 177 in model 217, 222
Remove/install heat shield for firewall Model 118, 177, 247 with engine 608
Remove/install charge air cooler Engine 177 in model 217, 222
Drain/pour in coolant Engine 177 in model 290
Remove/install slide rails on secondary chain drive Engine 177 in model 463 as of model year 2019
Remove/install right high-pressure line Engine 177 in model 213
Remove/install fan unit Model 118, 177, 247 with engine 654
Drain/fill low-temperature circuit coolant Engine 608 in model 118, 177, 247
Remove/install flywheel / drive plate Engine 282 in model 118, 177, 247 with transmission 700.42
Remove/install exhaust manifold Engine 177 in model 253
Refrigerant compressor remove/install Model 290 with engine 177
Remove/install chain tensioner Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install liquid-cooled charge air cooler Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install hydraulic valve clearance compensating elements Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right charge air temperature sensor downstream of throttle valve Engine 177 in model 217, 222
Remove/install camshafts Engine 282 in model 118, 177, 247
Remove/install right charge air distributor Engine 177 in model 253
Remove/install left air filter housing Engine 177 in model 463 as of model year 2019
Remove/install refrigerant pressure sensor Model 463 with engine 176, 177 as of model year 2019
Inspect cooling system for leaks Engine 260, 282 in model 118, 177, 247
Remove/install right high-pressure line Engine 177 in model 253
Remove/install position sensor of right cylinder bank exhaust camshaft Engine 177 in model 290
Remove/install left heat shield on left turbocharger Engine 177 in model 290
Remove/install low-temperature circuit expansion reservoir Engine 177 in model 213
Remove/install cooling module Engine 177 in model 463 as of model year 2019
Tightening procedure for charge air distributor Engine 177 in model 167 Engine 177 in model 213, 217, 222 Engine 177 in model 463 as of model year 2019
Remove/install right boost pressure sensor upstream of throttle valve Engine 177 in model 217, 222
Remove/install purge valves holder Engine 177 in model 217, 222
Refrigerant compressor remove/install Engine 654 in model 118, 177, 247
Set engine at cylinder 1 to 40 degrees after top dead center Engine 177 in model 290
Remove/install engine management (MCM) control unit holder Engine 177 in model 213
Remove/install heat shield of turbocharger Engine 177 in model 463 as of model year 2019
Check low-pressure line Engine 176, 177, 178, 264
Remove/install camshaft positioner of right cylinder bank Engine 177 in model 463 as of model year 2019
Remove/install alternator Engine 177 in model 253
Remove/install low-temperature circuit coolant pump Engine 608 in model 118, 177, 247
Remove/install left secondary chain drive chain tensioner Engine 177 in model 217, 222
Remove/install air filter housing Engine 608 in model 118, 177, 247
Remove/install left high-pressure line Engine 177 in model 463 as of model year 2019
Remove/install retaining lock for crankshaft Engine 177 in model 463 as of model year 2019
Remove/install oil pump chain Engine 177 in model 213
Remove/install charge air cooler Engine 177 in model 213
Remove/install right engine mount Engine 260 in model 118, 177, 247 Engine 282 in model 118, 177, 247
Remove/install coolant expansion reservoir Engine 260, 282 in model 118, 177, 247
Remove/install left rail with fuel injectors Engine 177 in model 217, 222
Remove/install crankshaft position sensor Engine 608 in model 118, 177, 247
Remove/install charge air pipe downstream of turbocharger Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install right rail Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Detach/attach holder for camshafts Engine 177 in model 253
Remove/install front engine mount Engine 176 in model 217, 222 Engine 177 in model 217, 222
Remove/install right air filter housing Engine 177 in model 463 as of model year 2019
Remove/install slide rails on primary chain drive Engine 177 in model 253
Remove/install transfer case control unit Transmission 725.09 in model 290 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install crankshaft Hall sensor Engine 177 in model 463 as of model year 2019
Disconnect/connect engine wiring harness to remove engine Engine 177 in model 463 as of model year 2019
Reduce fuel pressure through service valve Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 253
Remove/install camshaft positioner of left cylinder bank Engine 177 in model 253
Remove/install expansion reservoir Engine 177 in model 290
Assign crankshaft bearing shells Engine 152, 157, 176, 177, 178, 276, 278 Engine 157, 176
Remove/install vacuum pump Model 290 with engine 177
Remove/install a flywheel Engine 177 in model 290
Remove/install position sensors of camshafts on right cylinder bank Engine 177 in model 217, 222
Remove/install chain tensioner Engine 654 in model 118, 177, 247
Remove/install alternator Engine 177 in model 290
Remove/install vacuum pump Model 205 with engine 177 Model 463 with engine 176 up to model year 2019
Set basic position of camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install dual-clutch transmission Transmission 700.42 in model 118, 177, 247 with engine 608
Remove/install left secondary chain drive chain tensioner Engine 177 in model 253
Routing diagram for poly-V belt Engine 177 in model 213 Engine 177 in model 217, 222 Engine 177 in model 290 Engine 177 in model 463 as of model year 2019
Remove/install camshafts of right cylinder bank Engine 177 in model 217, 222
Remove/install expansion reservoir Engine 177 in model 463 as of model year 2019
Oil pump tightening procedure Engine 176 Engine 177 Engine 178
Remove/install electric refrigerant compressor Model 118, 177, 247 with engine 282 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install charge air cooler Engine 177 in model 290
Removing installing oil-to-water heat exchanger at oil sump Engine 282 in model 118, 177, 247
Remove/install position sensors of camshafts on left cylinder bank Engine 177 in model 253
Remove/install right fuel pressure sensor Engine 177 in model 213
Remove/install guide pulley for refrigerant compressor poly-V-belt Engine 177 in model 290
Remove/install belt pulley/vibration damper Engine 177 in model 213
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install solenoid camshaft Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190 (except 190.381)
Remove/install washer fluid reservoir of windshield washer system Model 118, 177, 247 with engine 260, 282, 608, 654
Remove/install right front engine support Engine 177 in model 463 as of model year 2019
Remove/install poly V-belt of alternator Engine 177 in model 463 as of model year 2019
Remove/install lift solenoid of left exhaust camshaft at front Engine 177 in model 217, 222
Remove/install lift solenoid of right intake camshaft at rear Engine 177 in model 463 as of model year 2019
Remove/install turbocharger with exhaust manifold Engine 282 in model 118, 177, 247
Remove/install guide pulley for refrigerant compressor poly-V-belt Engine 177 in model 217, 222
Remove/install lower guide pulley for poly-V belt of refrigerant compressor Engine 177 in model 253
Remove/install coolant thermostat Engine 177 in model 213
Remove/install starter Engine 139 in model 118, 177, 247
Remove/install power electronics holder Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Drain evacuate and recharge air conditioning check for proper operation and check for leaks Model 118 with engine 139, 260, 282, 608, 654 Model 177 with engine 139, 260, 282, 608, 654 Model 247 with engine 260, 282, 608, 654 Model 247.7 with engine 139
Remove/install lift solenoid of right exhaust camshaft at front Engine 177 in model 463 as of model year 2019
Remove/install divert air switchover valve Engine 177 in model 205
Remove/install alternator Engine 177 in model 205
Remove/install the tensioning device for the oil pump chain Engine 177 in model 213
Remove/install right high-pressure fuel pump Engine 177 in model 253
Remove/install lift solenoid of right exhaust camshaft at front Engine 177 in model 290
Remove/install coolant circuit vent line of right turbocharger Engine 177 in model 463 as of model year 2019
Remove/install camshaft positioner of right cylinder bank Engine 177 in model 217, 222
Remove/install crankshaft Engine 177 in model 290
Remove/install condenser Model 118, 177, 247 with engine 608 with code 2U8 (Alternative refrigerant) except code 2U1 (Radiator shutter)
Disconnect/connect engine wiring harness to remove engine Engine 177 in model 253
Remove/install oil circuit feed line of turbochargers Engine 177 in model 463 as of model year 2019
Remove/install position sensor of right cylinder bank exhaust camshaft Engine 177 in model 463 as of model year 2019
Remove/install purge valves holder Model 290 with engine 177
Remove/install guide pulley for refrigerant compressor poly-V-belt Engine 177 in model 213
Remove/install shutoff valve Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install primary chain drive chain tensioner Engine 177 in model 290
Remove/install oil circuit feed line of turbochargers Engine 177 in model 290
Remove/install lift solenoid of left intake camshaft at front Engine 177 in model 217, 222
Remove/install slide rails on primary chain drive Engine 177 in model 217, 222
Remove/install tensioning device for poly-V belt of alternator Engine 177 in model 217, 222
Remove/install tensioning rails on secondary chain drive Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install cold air intake Engine 177 in model 463 as of model year 2019
Remove/install rear radial shaft sealing ring on crankshaft Engine 608 in model 118, 177, 247
Remove/install hydraulic valve clearance compensating elements Engine 654 in model 118, 177, 247
Remove/install left turbocharger Engine 177 in model 290
Remove/install left oxygen sensor upstream of catalytic converter Engine 177 in model 290
Remove/install position sensors of camshafts on right cylinder bank Engine 177 in model 253
Remove/install crankshaft Hall sensor Engine 177 in model 213
Remove/install left front engine support Engine 177 in model 217, 222
Inspect cooling system for leaks Engine 176, 177 in model 463 as of model year 2019
Remove/install camshafts of left cylinder bank Engine 177 in model 290
Remove/install camshaft positioner of left cylinder bank Engine 177 in model 290
Remove/install left heat shield on left turbocharger Engine 177 in model 167, 217, 222
Assign crankshaft bearing shells Engine 282 in model 118, 177, 247
Remove/install flywheel / drive plate Engine 177 in model 213
Remove/install position sensors of camshafts Engine 177 in model 205
Remove/install lift solenoid of left intake camshaft at front Engine 177 in model 463 as of model year 2019
Remove/install center low-pressure line Engine 177 in model 463 as of model year 2019
Remove install coolant return line for turbocharger Engine 654 in model 118, 177, 247
Remove/install vacuum pump Model 213 with engine 177
Remove/install vacuum pump Engine 177 in model 253
Remove/install lift solenoid of left intake camshaft at rear Engine 177 in model 217, 222
Remove/install lift solenoid of left intake camshaft at front Engine 177 in model 213
Remove/install additional engine radiator in right wheel arch Engine 177 in model 217, 222
Remove/install low-temperature circuit expansion reservoir Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install primary chain drive timing chain Engine 177 in model 290
Remove/install primary chain drive timing chain Engine 177 in model 217, 222
Remove/install right charge air distributor Engine 177 in model 213
Remove/install guide pulley for poly-V belt of alternator Engine 177 in model 213
Remove/install engine management control unit (MCM) Engine 177 in model 213
Remove/install lift solenoid of left intake camshaft at rear Engine 177 in model 463 as of model year 2019
Remove/install condenser Model 463 with engine 176, 177 as of model year 2019
Remove/install throttle valve actuator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install right oxygen sensor upstream of catalytic converter Engine 177 in model 290
Remove/install coolant pump Engine 177 in model 290
Remove/install oil pump chain Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install left catalytic converter Engine 177 in model 463 as of model year 2019
Remove/install coolant pump Engine 177 in model 213
Remove/install circulation pumps for low-temperature circuit Engine 177 in model 217, 222
Remove/install coolant pump Engine 177 in model 463 as of model year 2019
Remove/install oil pressure control valve on oil pump Engine 177 in model 217, 222
Remove/install oil feed line for turbocharger Engine 654 in model 118, 177, 247
Remove/install lift solenoid of right intake camshaft at rear Engine 177 in model 213
Remove/install lower engine stabilizer mount Engine 260, 282 in model 118, 177, 247
Remove/install left high-pressure fuel pump Engine 177 in model 213
Disconnect/connect engine wiring harness to remove engine Engine 177 in model 290
Remove/install expansion reservoir Engine 177 in model 213
Remove/install poly V-belt of alternator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install right high-pressure fuel pump Engine 177 in model 463 as of model year 2019
Remove/install right turbocharger Engine 177 in model 217, 222
Remove/install left front engine support Engine 177 in model 290
Remove/install oil circuit return line of left turbocharger Engine 177 in model 290
Remove/install right oxygen sensor downstream of catalytic converter Engine 177 in model 290
Remove/install position sensors of camshafts on left cylinder bank Engine 177 in model 217, 222
Remove/install low-temperature circuit expansion reservoir Engine 177 in model 217, 222
Drain/pour in coolant Engine 177 in model 253
Remove/install right charge air distributor Engine 177 in model 217, 222
Remove/install oil pressure control valve on oil pump Engine 177 in model 253
Remove/install starter Engine 282 in model 118, 177, 247
Remove/install condenser Model 118, 177, 247 with engine 282 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Drain/pour in coolant Engine 260, 282 in model 118, 177, 247
Remove/install lift solenoid of right intake camshaft at rear Engine 177 in model 290
Remove/install engine oil fill level sensor Engine 177 in model 217, 222
Remove/install primary chain drive timing chain Engine 177 in model 213
Remove/install Hall sensor of camshaft Engine 654 in model 118, 177, 247
Remove/install position sensors of camshafts on right cylinder bank Engine 177 in model 213
Remove/install ignition coils of left cylinder bank Engine 177 in model 213
Remove/install coolant expansion reservoir Model 217 with engine 176, 177 Model 222 with engine 176, 177, 656
Remove/install engine oil fill level sensor Engine 177 in model 253
Refrigerant compressor remove/install Engine 177 in model 463 as of model year 2019
Remove/install engine oil fill level sensor Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install upper engine stabilizer mount Engine 260 in model 118, 177, 247
Remove/install coolant expansion reservoir Engine 654 in model 118, 177, 247
Remove/install camshaft positioner Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install charge air pipe upstream of liquid-cooled charge air cooler Engine 608 in model 118, 177, 247
Remove/install fan unit Engine 177 in model 290
Check low-temperature circuit for leaktightness Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Detach/attach holder for camshafts Engine 176 in model 463 as of model year 2019 Engine 176, 177 in model 167 Engine 176, 177 in model 217, 222 Engine 177 in model 213 Engine 177 in model 290 Engine 177 in model 463
Remove/install solenoid of right exhaust camshaft Engine 177 in model 253
Remove/install engine oil fill level sensor Engine 654 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 177 in model 253
Remove/install alternator belt pulley Engine 177 in model 213
Check alternator Engine 177 in model 253
Remove/install right heat shield on right turbocharger Engine 177 in model 167 Engine 177 in model 463 as of model year 2019
Remove/install lift solenoid of left intake camshaft at rear Engine 177 in model 213
Remove poly-V-belt of refrigeration compressor of air conditioning system install Engine 177 in model 463 as of model year 2019
Remove/install primary chain drive tensioning rail Engine 177 in model 463 as of model year 2019
Remove/install exhaust gas recirculation cooler Engine 608 in model 118, 177, 247
Remove install coolant feed line for turbocharger Engine 654 in model 118, 177, 247
Remove/install right secondary chain drive chain tensioner Engine 177 in model 217, 222
Remove/install right engine mount Engine 654 in model 118, 177, 247
Remove/install turbocharger Engine 654 in model 118, 177, 247
Drain/pour in coolant Engine 177 in model 213
Remove/install additional engine radiator Engine 177 in model 213
Remove/install glow plugs Engine 654 in model 118, 177, 247
Remove/install camshaft positioner of left cylinder bank Engine 177 in model 463 as of model year 2019
Remove/install right high-pressure fuel pump Engine 177 in model 290
Remove/install solenoids of camshafts in right cylinder head Engine 177 in model 213
Remove/install secondary chain drive timing chains Engine 177 in model 253
Remove/install NOx sensor with control unit upstream of SCR catalytic converter Engine 608 in model 118, 177, 247
Remove/install starter Engine 654 in model 118, 177, 247
Remove/install AdBlue(R) metering valve Engine 608 in model 118, 177, 247
Remove/install low-temperature circuit coolant expansion reservoir holder Engine 177 in model 290
Remove/install low-pressure lines Engine 177 in model 205, 253
Remove/install right heat shield on right turbocharger Engine 177 in model 213
Remove/install guide pulley for poly-V belt of alternator Engine 177 in model 253
Remove/install condenser Model 118, 177, 247 with engine 260 with code 2U8 (Alternative refrigerant) except code 2U1 (Radiator shutter) Model 118, 177, 247 with engine 282 with code 2U8 (Alternative refrigerant) …
Remove/install tensioning device for poly-V belt of alternator Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install hydraulic valve clearance compensating elements Engine 177 in model 217, 222
Remove/install exhaust manifold Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install fan unit Engine 177 in model 213
Remove/install right turbocharger Engine 177 in model 290
Detach/attach heat shield on exhaust manifold Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Refrigerant compressor remove/install Engine 177 in model 253
Remove/install lift solenoid of left exhaust camshaft at rear Engine 177 in model 213
Remove/install lift solenoid of left exhaust camshaft at front Engine 177 in model 463 as of model year 2019
Remove/install poly V-belt of alternator Engine 177 in model 213
Remove poly-V-belt of refrigeration compressor of air conditioning system install Engine 177 in model 205
Remove/install transfer case temperature sensor Transmission 725.09 in model 290 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install left boost pressure sensor upstream of throttle valve Engine 177 in model 217, 222
Remove/install left circulation pump in engine compartment for low-temperature circuit Engine 177 in model 253
Replace rear radial shaft sealing ring Engine 177 in model 290
Remove/install primary chain drive tensioning rail Engine 177 in model 217, 222
Remove/install lift solenoid of right exhaust camshaft at rear Engine 177 in model 463 as of model year 2019
Remove/install air filter housing Engine 260 in model 118, 177, 247
Remove/install poly V-belt of alternator Engine 177 in model 253
Remove/install ignition coils Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install secondary chain drive timing chains Engine 177 in model 463 as of model year 2019
Remove/install coolant circuit return line of turbochargers Engine 177 in model 463 as of model year 2019
Remove/install fuel injectors Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install primary chain drive chain tensioner Engine 177 in model 217, 222
Remove/install position sensor of right cylinder bank intake camshaft Engine 177 in model 463 as of model year 2019
Check basic position of camshafts Engine 654 in model 118, 177, 247
Remove/install coolant circuit feed line of turbochargers Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 205
Remove/install coolant circuit return line of turbochargers Engine 177 in model 213
Remove/install left fuel pressure sensor Engine 177 in model 463 as of model year 2019
Replace rear radial shaft sealing ring Engine 177 in model 463 as of model year 2019
Remove/install engine management (MCM) control unit holder Engine 177 in model 290
Remove/install retaining lock for crankshaft/ring gear Engine 608 in model 118, 177, 247
Remove/install primary chain drive timing chain Engine 177 in model 253
Remove/install exhaust manifold Engine 654 in model 118, 177, 247
Remove/install primary chain drive chain tensioner Engine 177 in model 253
Remove/install left secondary chain drive chain tensioner Engine 177 in model 213
Remove/install solenoid of left exhaust camshaft Engine 177 in model 253
Remove/install left air filter housing Engine 177 in model 217, 222
Remove/install alternator Engine 177 in model 217, 222
Remove/install engine intake air duct downstream of air filter Engine 260 in model 118, 177, 247
Refrigerant compressor remove/install Engine 177 in model 217, 222
Remove/install camshafts of right cylinder bank Engine 177 in model 253
Remove/install rail Engine 654 in model 118, 177, 247
Remove/install primary chain drive chain tensioner Engine 177 in model 213
Remove/install crankshaft Hall sensor Engine 282 in model 118, 177, 247
Remove/install oil pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Routing diagram for poly-V belt Engine 177 in model 253
Remove/install primary chain drive timing chain Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Tightening procedure for crankshaft bearing caps Engine 176, 177, 178
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 290 with engine 177
Remove/install coolant thermostat Engine 177 in model 463 as of model year 2019
Remove/install exhaust aftertreatment unit Engine 654 in model 118, 177, 247
Remove/install crankshaft Engine 282 in model 118, 177, 247
Remove/install crankshaft Engine 177 in model 217, 222
Remove/install right turbocharger Engine 177 in model 463 as of model year 2019
Remove/install camshafts of left cylinder bank Engine 177 in model 463 as of model year 2019
Remove/install fuel injectors Engine 654 in model 118, 177, 247
Remove/install crankshaft Hall sensor Engine 177 in model 290
Remove/install slide rails on secondary chain drive Engine 177 in model 213
Tightening procedure for charge air distributor Engine 177 in model 253
Remove/install lift solenoid of right exhaust camshaft at front Engine 177 in model 213
Remove/install the tensioning device for the oil pump chain Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install poly-V belt Engine 260 in model 118, 177, 247
Remove/install camshaft positioner of right cylinder bank Engine 177 in model 253
Remove/install solenoid of left intake camshaft Engine 177 in model 463 as of model year 2019
Remove/install charge air hose downstream of liquid-cooled charge air cooler Engine 608 in model 118, 177, 247
Remove/install guide pulley for poly-V belt of alternator Engine 177 in model 217, 222
Manually deenergize high-voltage on-board electrical system Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install oil pressure control valve on oil pump Engine 177 in model 290
Empty AdBlue(R) tank Engine 654 in model 118, 177, 247
Remove/install fuel injection system control unit Engine 260 in model 118, 177, 247
Remove/install solenoid of left exhaust camshaft Engine 177 in model 463 as of model year 2019
Remove/install right rail with fuel injectors Engine 177 in model 253
Remove/install engine management control unit (MCM) Engine 177 in model 290
Mount high-pressure lines. Engine 176 in model 167 Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install heat shield of turbocharger Engine 177 in model 290
Remove/install desiccant cartridge Model 118, 177, 247 with engine 608, 654 with code 2U8 (Alternative refrigerant)
Remove/install solenoid of right intake camshaft Engine 177 in model 253
Remove/install diesel fuel injection system control unit Engine 654 in model 118, 177, 247
Remove/install lift solenoid of right intake camshaft at front Engine 177 in model 463 as of model year 2019
Remove/install camshaft positioner of left cylinder bank Engine 177 in model 217, 222
Remove/install right rail with fuel injectors Engine 177 in model 213
Remove/install contacts from coupling housing of high-voltage disconnect device Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install exhaust manifold heat shield Engine 177 in model 463 as of model year 2019
Remove/install front engine mount Engine 177 in model 463 as of model year 2019
Remove/install coolant pump Engine 177 in model 217, 222
Remove/install crankshaft Hall sensor Engine 654 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove engine Engine 177 in model 217, 222
Remove/install ignition coils of right cylinder bank Engine 177 in model 253
Remove/install left high-pressure fuel pump Engine 177 in model 463 as of model year 2019
Remove/install glow output stage Engine 608 in model 118, 177, 247
Remove/install poly V-belt of alternator Engine 177 in model 217, 222
Remove/install belt pulley Engine 177 in model 253
Remove/install left rail with fuel injectors Engine 177 in model 213
Remove/install upper guide pulley for poly-V belt of refrigerant compressor Engine 177 in model 253
Remove/install guide pulley for refrigerant compressor poly-V-belt Engine 177 in model 463 as of model year 2019
Remove/install oil pump Engine 177 in model 463 as of model year 2019
Remove/install poly V-belt of alternator Engine 177 in model 290
Disconnect/connect engine wiring harness to remove engine Engine 654 in model 118, 177, 247
Remove/install the tensioning device for the oil pump chain Engine 177 in model 463 as of model year 2019
Remove/install position sensors of camshafts on left cylinder bank Engine 177 in model 213
Remove/install engine management (MCM) control unit holder Engine 177 in model 217, 222
Remove/install lift solenoid of left exhaust camshaft at front Engine 177 in model 213
Remove/install right air filter housing Engine 177 in model 217, 222
Remove/install tensioning rails on secondary chain drive Engine 177 in model 217, 222
Check engine cooling system for leaktightness Engine 177 in model 290
Remove/install right heat shield on right turbocharger Engine 177 in model 290
Remove/install propeller shaft Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019
Remove/install left air filter housing Engine 177 in model 213
Remove/install oil pump Engine 177 in model 290
Drain/pour in coolant Engine 177 in model 463 as of model year 2019
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 217, 222
Remove/install right charge air temperature sensor downstream of throttle valve Engine 177 in model 253
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 290
Remove/install sensor unit of temperature sensors Engine 608 in model 118, 177, 247
Remove/install fan unit Engine 177 in model 205
Remove/install oil pump Engine 282 in model 118, 177, 247
Remove/install right boost pressure sensor upstream of throttle valve Engine 177 in model 290
Detach/attach holder for camshafts Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install refrigerant compressor poly-V-belt Engine 177 in model 290
Remove/install right turbocharger Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Position engine for removal/installation of chain tensioners Engine 176 in model 167 Engine 176 in model 463 Engine 177 in model 205 Engine 178 in model 190
Remove/install hot film mass air flow sensor Engine 608 in model 118, 177, 247
Remove/install oil pump chain Engine 177 in model 217, 222
Remove/install coolant circuit vent line of right turbocharger Engine 177 in model 290
Remove/install exhaust gas temperature sensor downstream of SCR catalytic converter Engine 654 in model 118, 177, 247
Remove/install right water-cooled charge air cooler Engine 177 in model 253
Remove/install lower guide pulley for poly-V belt of refrigerant compressor Engine 177 in model 205
Remove/install dual-clutch transmission Transmission 700.42 in model 118, 177, 247 with engine 282
Remove/install desiccant cartridge Model 463 with engine 176, 177 as of model year 2019
Remove/install oil pressure control valve on oil pump Engine 177 in model 213
Remove/install left front engine support Engine 177 in model 213 with code M005 (4MATIC)
Remove/install oil circuit feed line of turbochargers Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install engine oil cooler Engine 177 in model 213
Remove/install left secondary chain drive chain tensioner Engine 177 in model 290
Remove/install secondary chain drive timing chains Engine 177 in model 290
Remove/install front axle gear Model 463 with engine 176, 177 as of model year 2019
Remove/install engine oil cooler Engine 177 in model 290
Remove/install charge air pipe from turbocharger to charge air cooler Engine 282 in model 118, 177, 247
Remove/install mixing chamber Engine 608 in model 118, 177, 247
Remove/install right high-pressure fuel pump Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install camshaft housing with camshafts Engine 654 in model 118, 177, 247
Set basic position of camshafts Engine 177 in model 217, 222
Remove/install crankshaft Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install camshafts of left cylinder bank Engine 177 in model 253
Remove/install lift solenoid of right exhaust camshaft at rear Engine 177 in model 213
Remove/install air filter housing Engine 654 in model 118, 177, 247
Remove/install camshafts of right cylinder bank Engine 177 in model 463 as of model year 2019
Remove/install charge air cooler Engine 177 in model 463 as of model year 2019
Reduce fuel pressure through service valve Engine 177 in model 253
Remove/install engine management control unit (MCM) Engine 177 in model 253
Remove/install differential pressure sensor Engine 177 in model 290 with code 598 (Gasoline particulate filter (OPF) with sensor system)
Automatic transmission fluid (ATF) (specification 236.21) Model 117, 118, 156, 176, 177, 242, 246, 247 with transmission 724 Model 242 with engine 780
Detach/attach high-voltage plug Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install ignition coils of left cylinder bank Engine 177 in model 253
Remove/install left boost pressure sensor downstream of throttle valve Engine 177 in model 290
Remove/install charge air distributor Engine 654 in model 118, 177, 247
Remove/install coolant circuit vent line of right turbocharger Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install crankshaft Engine 177 in model 213
Remove/install turbocharger oil circuit return line Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install fan unit Engine 177 in model 217, 222
Routing diagram for poly-V belt Engine 176 in model 463 Engine 177 in model 205 Engine 178 in model 190
Check low-temperature circuit for leaktightness Engine 177 in model 205
Remove/install belt pulley/vibration damper Engine 654 in model 118, 177, 247
Remove/install hydraulic valve clearance compensating elements Engine 177 in model 213
Remove/install lift solenoid of left exhaust camshaft at rear Engine 177 in model 463 as of model year 2019
Remove/install left high-pressure line Engine 177 in model 253
Remove/install oil pump chain Engine 177 in model 290
Attach/detach engine hoist Model 217, 222 with engine 176, 177
Remove/install low-temperature circuit expansion reservoir Engine 176 in model 463 up to model year 2019 Engine 177 in model 205
Remove/install radiator Engine 177 in model 217, 222
Remove/install left high-pressure fuel pump Engine 177 in model 217, 222
Remove/install camshaft positioner of right cylinder bank Engine 177 in model 213
Remove/install oil circuit return line of left turbocharger Engine 177 in model 213
Remove poly-V-belt of refrigeration compressor of air conditioning system install Engine 177 in model 253
Set basic position of camshafts Engine 177 in model 253
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 290 with engine 177
Remove/install piston Engine 282 in model 118, 177, 247
Remove/install piston rings Engine 654 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 177 in model 463 as of model year 2019
Remove/install oil pump chain Engine 177 in model 253
Removing and installing the purge valve Engine 282 in model 118, 177, 247
Detach/attach heat shield on turbocharger Engine 608 in model 118, 177, 247
Remove/install crankshaft Engine 177 in model 253
Disconnect connect wiring harness at alternator with tie Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 178 in model 190
Remove/install flywheel / drive plate Engine 608 in model 118, 177, 247 with transmission 711.63
Remove/install fan unit Engine 177 in model 463 as of model year 2019
Remove/install left boost pressure sensor upstream of throttle valve Engine 177 in model 290
Remove/install alternator Engine 177 in model 463 as of model year 2019
Remove/install left heat shield on left turbocharger Engine 177 in model 253
Remove/install fuel injectors sealing package on rail Engine 133, 139, 152.9, 157, 176, 177, 178, 254, 256, 260, 264, 270, 274, 276, 278
Remove/install oil pump Engine 177 in model 213
Remove/install catalytic converter Engine 177 in model 205
Set engine at cylinder 1 to 40 degrees after top dead center Engine 177 in model 167 Engine 177 in model 213 Engine 177 in model 217, 222 Engine 177 in model 463
Remove/install primary chain drive tensioning rail Engine 177 in model 290
Remove/install high-pressure exhaust gas recirculation valve Engine 608 in model 118, 177, 247
Remove/install guide pulley for poly-V belt of alternator Engine 177 in model 290
Inspect cooling system for leaks Engine 177 in model 253
Remove/install oil pump Engine 177 in model 253
Remove/install crankshaft Engine 654 in model 118, 177, 247
Remove/install slide rails on secondary chain drive Engine 177 in model 217, 222
Remove/install poly-V belt Engine 654 in model 118, 177, 247
Remove/install flywheel / drive plate Engine 608 in model 118, 177, 247 with transmission 700.42
Remove/install coolant thermostat Engine 177 in model 253
Remove/install lower coolant expansion reservoir for low-temperature circuit Engine 177 in model 253
Remove/install gasoline particulate filter differential pressure sensor Model 167 with engine 177 with code 598 (Gasoline particulate filter (OPF) with sensor system)
Remove/install right air filter housing Engine 177 in model 167
Remove/install center exhaust system Engine 176, 177 in model 167
Remove/install filler neck for engine oil Engine 177 in model 167
Remove/install transfer case oil cooler Transmission 725.09 in model 290 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install low-pressure lines Engine 177 in model 167
Remove/install differential lock of front axle Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Drain/pour in coolant Engine 177 in model 167
Remove/install engine with front axle carrier Engine 177 in model 167
Remove/install solenoids of camshafts in left cylinder head Engine 177 in model 290
Remove/install right oxygen sensor upstream of catalytic converter Engine 176, 177 in model 167
Remove/install purge valves holder Engine 177 in model 167
Remove/install left air filter housing Engine 177 in model 167
Remove/install coolant lines for transfer case oil cooler Transmission 725.0 in model 290 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Seal front axle transmission Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install coolant expansion reservoir Engine 176 in model 167 Engine 177 in model 167
Remove/install heat shield of turbocharger Engine 177 in model 167
Remove/install low-temperature circuit coolant expansion reservoir holder Engine 177 in model 167
Remove/install right catalytic converter Engine 176, 177 in model 167
Remove/install left charge air distributor Engine 177 in model 217, 222
Remove/install engine management (MCM) control unit holder Engine 177 in model 167
Remove/install left oxygen sensor downstream of catalytic converter Engine 177 in model 463 as of model year 2019
Install drive flange onto drive pinion Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Determine gap between stator and rotor Engine 176, 177 in model 167
Remove/install left fuel pressure sensor Engine 177 in model 217, 222
Remove/install left rail with fuel injectors Engine 177 in model 290
Remove/install crankshaft Hall sensor Engine 176, 177 in model 167
Check low-temperature circuit for leaktightness Engine 177 in model 290
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 177 in model 167 Engine 177 in model 463 as of model year 2019
Check alternator Engine 177 in model 463 as of model year 2019
Remove/install radiator unit Engine 177 in model 167
Remove/install automatic transmission fluid cooler Model 167 with engine 177 with transmission 725.0
Remove/install rear connecting flange on crankcase Engine 176, 177 in model 167
Remove/install right high-pressure fuel pump Engine 177 in model 217, 222
Remove/install right front engine support Engine 176, 177 in model 167
Remove/install propeller shaft Model 167 with engine 176, 177, 256.9, 264, 274
Remove/install lift solenoid of right exhaust camshaft at front Engine 177 in model 217, 222
Remove/install transfer case Transmission 725.0 in model 463 with engine 176 as of model year 2019 Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install left oxygen sensor upstream of catalytic converter Engine 176, 177 in model 167
Remove/install front axle shafts Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install right boost pressure sensor upstream of throttle valve Engine 177 in model 167
Remove/install lift solenoid of left intake camshaft at rear Engine 177 in model 290
Remove/install integrated starter alternator control unit Engine 176, 177 in model 167
Remove/install center exhaust system Engine 177 in model 290
Remove/install solenoid of right exhaust camshaft Engine 177 in model 463 as of model year 2019
Remove/install ignition coils of right cylinder bank Engine 177 in model 217, 222
Remove/install coolant pump Engine 177 in model 253
Remove/install solenoid of right intake camshaft Engine 177 in model 463 as of model year 2019
Disconnect/connect engine wiring harness to remove engine Engine 176, 177 in model 167
Remove/install front axle differential propeller shaft Model 167 with engine 176, 177, 256.9, 264, 274
Remove/install right fuel pressure sensor Engine 177 in model 463 as of model year 2019
Check engine cooling system for leaktightness Engine 176 in model 167 Engine 177 in model 167
Determine oil consumption Engine 607 in model 117, 156, 176, 246 Engine 608 in model 118, 177, 247 Engine 626 in model 205 Engine 646.8 in model 204, 211 Engine 651 in model 117, 156, 166, 172, 176, 204, 205, …
Remove/install lift solenoid of right exhaust camshaft at rear Engine 177 in model 217, 222
Remove/install low-temperature circuit coolant expansion reservoir holder Engine 177 in model 217, 222
Remove/install transfer case absolute sensor Model 463 with engine 176 with transmission 725.0 as of model year 2019 Model 463 with engine 177 with transmission 725.0 as of model year 2019 Model 463 with engine 264 with …
Remove/install solenoids of camshafts in left cylinder head Engine 177 in model 217, 222
Remove/install lift solenoid of right intake camshaft at front Engine 177 in model 217, 222
Remove/install right oxygen sensor upstream of catalytic converter Engine 177 in model 463 as of model year 2019
Remove/install engine management control unit (MCM) Engine 176, 177 in model 167
Remove/install power electronics Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install left radial shaft sealing ring on front axle transmission Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install left boost pressure sensor downstream of throttle valve Engine 177 in model 217, 222
Check low-temperature circuit for leaktightness Engine 177 in model 167
Check oil level in front axle differential correct if necessary Model 463 with engine 176, 177 as of model year 2019 Model 463 with engine 264 as of model year 2019
Remove/install left high-pressure line Engine 177 in model 217, 222
Remove/install lift solenoid of left exhaust camshaft at rear Engine 177 in model 290
Remove/install left boost pressure sensor upstream of throttle valve Engine 177 in model 167
Remove/install left exhaust manifold Engine 177 in model 217, 222
Remove/install engine management control unit (MCM) Engine 177 in model 463 as of model year 2019
Remove/install low-temperature circuit expansion reservoir Engine 177 in model 167
Check coolant main circuit for leaktightness Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install fan unit Engine 177 in model 167
Drain/fill low-temperature circuit coolant Engine 177 in model 167
Remove/install front axle shafts Model 167 with engine 176, 177, 256.9, 274 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install rear engine mount Engine 177 in model 290
Detach/attach tool for installation/removal of integrated starter alternator Engine 176, 177 in model 167
Attach/detach engine support fixture Engine 176, 177 in model 167
Remove/install right oxygen sensor downstream of catalytic converter Engine 177 in model 463 as of model year 2019
Remove/install exhaust system Engine 176, 177 in model 167
Remove/install boost pressure control pressure transducer Engine 177 in model 253
Remove/install additional radiator Engine 177 in model 290
Remove/install transfer case Transmission 725.09 in model 290 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install right rail with fuel injectors Engine 177 in model 217, 222
Remove/install engine from/onto front axle carrier Engine 177 in model 167
Remove/install right heat shield on right turbocharger Engine 177 in model 217, 222
Remove/install right high-pressure line Engine 177 in model 463 as of model year 2019
Remove/install right boost pressure sensor downstream of throttle valve Engine 177 in model 213
Remove/install integrated starter alternator Engine 176, 177 in model 167
Remove/install exhaust system complete ENGINES 156.980 in MODEL 164.177
Remove/install transfer case control unit Transmission 725.0 in model 463 with engine 176 as of model year 2019 Transmission 725.0 in model 463 with engine 177 as of model year 2019
Remove/install left high-pressure line Engine 177 in model 290
Remove/install transfer case oil cooler Transmission 725.09 in model 253 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Perform resistance measurement of coils of integrated starter alternator Engine 176, 177 in model 167
Remove/install left charge air temperature sensor downstream of throttle valve Engine 177 in model 217, 222
Remove/install left high-pressure fuel pump Engine 177 in model 290
Remove/install lift solenoid of right intake camshaft at rear Engine 177 in model 217, 222
Remove/install condenser Model 167 with engine 176, 177
Drain/fill coolant of main circuit Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install left oxygen sensor upstream of catalytic converter Engine 177 in model 463 as of model year 2019
Remove/install radial shaft sealing ring on drive pinion Model 463 with engine 176 as of model year 2019 Model 463 with engine 177 as of model year 2019
Remove/install right oxygen sensor downstream of catalytic converter Engine 176, 177 in model 167
Remove/install transfer case Transmission 725.09 in model 253 with engine 177 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install right charge air temperature sensor downstream of throttle valve Engine 177 in model 213
Remove/install left catalytic converter Engine 176, 177 in model 167
Remove/install front axle gear Model 167 with engine 176, 177, 256.9, 274 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install left oxygen sensor downstream of catalytic converter Engine 177 in model 167
Remove/install low-temperature circuit additional radiator Engine 176, 177 in model 167
Pour in coolant and bleed cooling circuit Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Tightening procedure of integrated starter alternator Engine 176 Engine 177 Engine 256.9
Remove/install right low-pressure line Engine 177 in model 463 as of model year 2019
Remove/install transfer case control unit Model 167 with engine 176 with transmission 725.0 Model 167 with engine 177 with transmission 725.0
Remove/install transfer case Model 167 with engine 176 with transmission 725.0 Model 167 with engine 177 with transmission 725.0 Model 167 with engine 256.9 with transmission 725.0 Model 167 with engine 274 with …
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 177 in model 217, 222
Remove/install lift solenoid of left intake camshaft at front Engine 177 in model 290
Remove/install left fuel pressure sensor Engine 177 in model 290
Remove/install charge air cooler Engine 177 in model 167
Remove/install transmission with torque converter Transmission 725.0 in model 167 with engine 176 Transmission 725.0 in model 167 with engine 177
Remove/install radial shaft sealing ring at output side Model 167 (except 167.148) with engine 264 with transmission 725.0 Model 167 with engine 176 with transmission 725.0 Model 167 with engine 177 with transmission 725.0 Model 167 with …
Remove/install heater shutoff valve Engine 177 in model 253
Remove/install rear engine support Engine 177 in model 167
Remove/install engine management (MCM) control unit holder Engine 177 in model 463 as of model year 2019
Reduce fuel pressure through service valve Engine 177 in model 463 as of model year 2019
Remove/install lift solenoid of left exhaust camshaft at front Engine 177 in model 290
Remove/install front engine mount Engine 176, 177 in model 167
Bolt plan for oil pan lower section Engine 282 in model 118, 177, 247
Remove/install circulation pump for low-temperature circuit Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Measure absolute angle at rear axle housing Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install engine with transmission Engine 260 in model 118, 177, 247 with transmission 724.0
Remove/install exhaust manifold Engine 139 in model 118, 177, 247
Remove/install alternator belt pulley Engine 139 in model 118, 177, 247
Remove/install heat shield for firewall Engine 139 in model 118, 177, 247
Loosen/tighten upper timing case cover screws Engine 260 in model 118, 177, 247
Assembly and covering work when painting the engine hood Model 118, 177, 247
Remove/install exhaust system downstream of catalytic converter Engine 139 in model 118, 177, 247
Remove/install throttle valve actuator Engine 654 in model 118, 177, 247
Adjust engine hood Model 118 Model 177 Model 247
Remove/install charge air pressure and temperature sensor downstream of throttle valve Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install NOx sensor with control unit upstream of SCR catalytic converter Engine 654 in model 118, 177, 247
Replace timing chain Engine 260 in model 118, 177, 247
Remove/install exhaust camshaft adjustment solenoid Engine 260 in model 118, 177, 247
Remove/install bearing for rear axle differential suspension in rear axle carrier at right front Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install throttle valve actuator Engine 282 in model 118, 177, 247
Remove/install injection lines of common rail direct injection Engine 654 in model 118, 177, 247
Remove/install oil circuit return line of left turbocharger Engine 177 in model 217, 222
Remove/install glow output stage Engine 654 in model 118, 177, 247
Remove/install front radial shaft sealing ring on crankshaft Engine 260 in model 118, 177, 247
Remove/ install activated charcoal canister Engine 139, 260 in model 118, 177, 247 Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install valves Engine 260 in model 118, 177, 247
Remove/install oxygen sensor downstream of catalytic converter Engine 260 in model 118, 177, 247
Remove/install pressure lines Engine 139 in model 118, 177, 247
Remove/install rear radial shaft sealing ring on crankshaft Engine 260 in model 118, 177, 247
Remove/install knock sensors Engine 260 in model 118, 177, 247
Check coolant auxiliary circuit for leaktightness Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install evaporator in wheel arch Model 118, 177, 247 with engine 139
Check oil pressure Engine 260 in model 118, 177, 247
Remove/install oxygen sensor downstream of catalytic converter Engine 282 in model 118, 177, 247
Remove/install heat shield for firewall Engine 654 in model 118, 177, 247
Remove/install charge air pipe downstream of turbocharger Engine 139 in model 118, 177, 247
Check basic position of camshafts Engine 282 in model 118, 177, 247
Remove/install partial load crankcase ventilation system valve Engine 260 in model 118, 177, 247
Check low-temperature circuit coolant level Engine 139 in model 118, 177, 247
Remove/install oxygen sensor upstream of catalytic converter Engine 282 in model 118, 177, 247
Remove/install fan unit Engine 260, 282 in model 118, 177, 247
Check low-temperature circuit cooling system for leaks Engine 139 in model 118, 177, 247
Remove/install coolant pump bearing housing Engine 654 in model 118, 177, 247
Remove/install transmission cooling coolant recirculation pump Transmission 724.1 in model 118, 177, 247 with engine 139 Transmission 724.1 in model 118, 177, 247 with engine 260 Transmission 724.1 in model 118, 177, 247 with engine 282 except …
Check oil pressure Engine 654 in model 118, 177, 247
Determine oil consumption Engine 152.9, 157, 176, 177, 178, 276, 277, 278, 279 Engine 254.9, 256.9 Engine 264 Engine 271, 272, 642, 646, 651
Tighten screws of low-pressure exhaust gas recirculation cooler Engine 654 in model 118, 177, 247
Remove/install right engine mount Engine 139 in model 118, 177, 247
Remove/install coolant temperature sensor Engine 260 in model 118, 177, 247
Remove/install oil pump Engine 260 in model 118, 177, 247
Remove/install oil return flow line of turbocharger Engine 282 in model 118, 177, 247
Remove/install intake module Engine 282 in model 118, 177, 247
Remove/install intake camshaft CAMTRONIC actuator Engine 282 in model 118, 177, 247 with code 936 (Cylinder cut-out system)
Remove/install poly-V belt tensioning device Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install camshaft positioner of exhaust camshaft Engine 282 in model 118, 177, 247
Remove/install heat shield of drive shaft on front axle Engine 260 in model 118, 177, 247
Remove/install charge air cooler Engine 260 in model 118, 177, 247 except code M016 (Uprated engine) Engine 282 in model 118, 177, 247
Remove/install fan unit Engine 139 in model 118, 177, 247
Notes on distribution of sealant on housing of chain tensioner Engine 282 in model 118, 177, 247
Remove/install valve springs Engine 260 in model 118, 177, 247
Remove/install ignition coils Engine 282 in model 118, 177, 247
Connecting recording-type compression tester Engine 260, 282 in model 118, 177, 247
Intake module tightening procedure Engine 282 in model 118, 177, 247
Correct articulation angle on rear axle differential Model 118, 177, 247 with engine 260, 282, 654 with code M005 (4MATIC)
Remove/install power take-off Transmission 724.1 in model 118, 177, 247 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install heat shield on exhaust gas turbocharger Engine 260 in model 118, 177, 247
Remove/install boost pressure control flap actuator Engine 260 in model 118, 177, 247
Routing diagram of poly-V belt Engine 139 in model 118, 177, 247
Remove/install power take-off Transmission 724.1 in model 118, 177, 247 with engine 139 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install NOx sensor with control unit downstream of SCR catalytic converter Engine 654 in model 118, 177, 247
Remove/install vacuum pump Model 118, 177, 247 with engine 260 except code M016 (Uprated engine)
Remove/install air filter housing Engine 139 in model 118, 177, 247
Remove/install oil sensor Engine 260, 282 in model 118, 177, 247
Removing and installing the purge valve Engine 260 in model 118, 177, 247
Remove/install exhaust gas recirculation (AGR) differential pressure sensor Engine 654 in model 118, 177, 247
Check regulator and alternator Engine 260 in model 118, 177, 247
Remove/install air intake pipe upstream of exhaust gas turbocharger Engine 139 in model 118, 177, 247
Remove/install radiator Engine 260 in model 118, 177, 247 except code 2U1 (Radiator shutter) Engine 282 in model 118, 177, 247 except code 2U1 (Radiator shutter) except code ME08 (Hybrid drive 75-84 kW …
Remove/install radiator Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install valve lift switchover actuator Engine 260 in model 118, 177, 247
Remove/install exhaust system downstream of catalytic converter Engine 260 in model 118, 177, 247 with code U55 (Multi-link axle) Engine 282 in model 118, 177, 247 with code U55 (Multi-link axle) except code ME08 (Hybrid drive 75-84 kW VARIANT …
Remove/install soot particulate sensor downstream of exhaust gas aftertreatment unit Engine 608 in model 118, 177, 247
Remove/install fuse and relay module in engine compartment left front Model 118, 177, 247
Remove/install poly-V-belt tensioning device Engine 654 in model 118, 177, 247
Remove/install engine hood Model 118, 177, 247
Tighten alternator screws/bolts Engine 260, 282, 608 Engine 654 in model 118, 177, 247
Remove/install drive unit Engine 282 in model 118, 177, 247 with transmission 724.120 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Correct articulation angle on rear axle differential Model 118, 177, 247 with engine 139 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install coolant circuit return line of turbochargers Engine 177 in model 217, 222
Remove/install slide rail of timing chain Engine 282 in model 118, 177, 247
Tighten high-pressure line from high-pressure fuel pump to Common Rail Direct Injection Engine 654 in model 118, 177, 247
Remove/install vacuum pump Model 118, 177, 247 with engine 282 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install fuel pump and fill level sensor Engine 260 in model 118, 177, 247 Engine 282 in model 118, 177, 247
Remove/install heat shield for firewall Model 118, 177, 247 with engine 282
Remove/install valve stem seals Engine 260 in model 118, 177, 247
Remove/install boost pressure control flap actuator Engine 139 in model 118, 177, 247
Remove/install radial shaft sealing ring on drive pinion Model 118, 177, 247 with engine 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Install front radial shaft sealing ring Engine 260 in model 118, 177, 247
Remove/install poly-V-belt guide pulley Engine 654 in model 118, 177, 247
Remove/install fuel distributor pressure sensor Engine 260, 282 in model 118, 177, 247
Remove install crankshaft pulse ring Engine 260 in model 118, 177, 247
Tightening procedure for timing case cover Engine 282 in model 118, 177, 247
Remove/install oxygen sensor upstream of catalytic converter Engine 139 in model 118, 177, 247
Detach/attach heat shield on turbocharger Engine 282 in model 118, 177, 247
Remove/install catalytic converter Engine 260 in model 118, 177, 247
Remove/install alternator belt pulley Engine 654 in model 118, 177, 247
Test alternator diodes Engine 260 in model 118, 177, 247 Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install camshaft positioner of intake camshaft Engine 282 in model 118, 177, 247
Remove/install inertization system line in engine compartment Model 118, 177, 247 with engine 282 with code 2U8 (Alternative refrigerant)
Remove/install leak oil line to injectors Engine 654 in model 118, 177, 247
Tightening procedure for oil pan bolts Engine 260 in model 118, 177, 247
Remove/install front module Model 118, 177, 247 with engine 139
Remove/install filler pipe of dual-clutch transmission Transmission 724.0 in model 118, 177, 247 with engine 260
Empty/fill fuel tank Model 118, 177, 247 with engine 139, 260, 282
Remove/install wiring harness for alternator Engine 139 in model 118, 177, 247
Remove/install radial shaft sealing ring of rear axle shaft on rear axle housing Model 118, 177, 247 with engine 139 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install coolant circuit feed line of turbochargers Engine 177 in model 217, 222
Remove/install cylinder head cover Engine 260 in model 118, 177, 247
Drain/fill coolant of auxiliary circuit Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Drain/pour in coolant Engine 139 in model 118, 177, 247
Remove/install exhaust system Engine 608 in model 118, 177, 247
Place balance shafts in basic position Engine 260 in model 118, 177, 247
Remove/install differential pressure sensor Engine 139 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove intake module Engine 282 in model 118, 177, 247
Remove/install rear muffler Engine 282 in model 118, 177, 247
Remove/install coolant pump Engine 260 in model 118, 177, 247
Replace spark plugs Engine 282 in model 118, 177, 247
Remove/install heat shield for firewall Model 118, 177, 247 with engine 260
Refrigerant compressor remove/install Engine 608 in model 118, 177, 247
Remove/install coolant thermostat Engine 654 in model 118, 177, 247
Intake module sealant path Engine 282 in model 118, 177, 247
Remove/install ignition coils Engine 139 in model 118, 177, 247
Remove/install intake camshaft adjustment solenoid Engine 260 in model 118, 177, 247
Remove/install cylinder head Engine 260 in model 118, 177, 247
Remove/install piston Engine 260 in model 118, 177, 247
Remove/install engine intake air duct downstream of air filter Engine 654 in model 118, 177, 247
Remove/install engine hood lifter Model 118, 177, 247.6/7 with code U60 (Pedestrian protection – Active hood)
Remove/install retaining lock for crankshaft/ring gear Engine 260 in model 118, 177, 247
Remove/install filler neck of fuel tank Model 118, 177, 247 with engine 260 Model 118, 177, 247 with engine 282 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install chain tensioner Engine 260 in model 118, 177, 247
Remove/install tensioning rail timing chain Engine 282 in model 118, 177, 247
Remove/install high pressure line Engine 654 in model 118, 177, 247
Remove/install fuel tank Model 118, 177, 247 with engine 139
Service Information: Spark plug connector grease Engine 104, 111, 112, 113, 119, 120, 133, 137, 152, 155, 156, 157, 159, 166, 176, 177, 178, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 285
Remove/install crankshaft Hall sensor Engine 260 in model 118, 177, 247
Inspect cooling system for leaks Engine 139 in model 118, 177, 247
Refrigerant compressor remove/install Model 118, 177, 247 with engine 139
Remove/install vacuum pump Model 118, 177, 247 with engine 260 with code M016 (Uprated engine)
Remove/install exhaust system downstream of catalytic converter Engine 282 in model 118, 177, 247 with code U54 (Compound-link axle) except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN)) except code U55 (Multi-link axle)
Check oil level in rear axle differential correct if necessary Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install flywheel / drive plate Engine 260 in model 118, 177, 247 with transmission 724.1
Remove/install additional radiator Engine 139 in model 118, 177, 247
Bolt tightening procedure for cylinder head cover Engine 282 in model 118, 177, 247
Remove/install boost pressure sensor upstream of throttle valve Engine 139 in model 118, 177, 247
Replace spark plugs Engine 260 in model 118, 177, 247
Test alternator charging current Engine 260 in model 118, 177, 247 Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install charge air pressure and temperature sensor upstream of throttle valve Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install position sensor of exhaust camshaft Engine 260 in model 118, 177, 247
Remove/install flywheel / drive plate Engine 260 in model 118, 177, 247 with transmission 724.0
Tightening pattern for turbocharger Engine 282 in model 118, 177, 247
Remove/install upper timing case cover Engine 260 in model 118, 177, 247
Drain/fill low-temperature circuit coolant Engine 139 in model 118, 177, 247
Remove/install poly-V belt Engine 608 in model 118, 177, 247
Check basic position of camshafts Engine 260 in model 118, 177, 247
Remove/install coolant pump Engine 282 in model 118, 177, 247
Perform insulation resistance measurement at stator of electric machine Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install inertization system line in engine compartment Model 118, 177, 247.7 with engine 139 with code 2U8 (Alternative refrigerant)
Replace valve stem seal Engine 260 in model 118, 177, 247
Remove/install temperature sensor with control unit upstream of soot particulate filter Engine 260, 282 in model 118 with code 961 (Exhaust system with OPF, generation 2.0) except code M005 (4MATIC) Engine 260, 282 in model 177, 247 with code 598 (Gasoline particulate …
Tighten Common Rail Direct Injection high-pressure lines Engine 654 in model 118, 177, 247
Remove/install coolant expansion reservoir Engine 139 in model 118, 177, 247
Remove/install position sensor of intake camshaft Engine 260 in model 118, 177, 247
Remove/install tensioning rail Engine 260 in model 118, 177, 247
Remove/install condenser in wheel arch Model 118, 177, 247 with engine 139
Remove/install low-temperature circuit cooler Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Disconnect/connect engine wiring harness to remove engine Engine 139 in model 118, 177, 247
Check cylinders for leaks Engine 260, 282 in model 118, 177, 247
Remove/install differential pressure sensor Engine 260 in model 118, 177, 247
Check compression pressure Engine 260, 282 in model 118, 177, 247
Remove/install catalytic converter Engine 282 in model 118, 177, 247
Remove/install rear axle differential Model 118, 177, 247 with engine 139 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install oxygen sensor downstream of catalytic converter Engine 139 in model 118, 177, 247
Timing gear casing – Remove/install lower cover Engine 260 in model 118, 177, 247
Remove/install camshaft positioner Engine 260 in model 118, 177, 247
Remove install coolant feed line for turbocharger Engine 139 in model 118, 177, 247
Remove/install inertization cartridge Model 118, 177, 247 with engine 260, 282 with code 2U8 (Alternative refrigerant) Model 118, 177, 247.7 with engine 139 with code 2U8 (Alternative refrigerant)
Remove/install actuator motor for differential lock Model 118, 177, 247 with engine 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install oil feed line for turbocharger Engine 139 in model 118, 177, 247
Measure vertical clearance of piston rings Engine 260 in model 118, 177, 247
Attach/detach engine support fixture Engine 260, 282, 608, 654 in model 118, 177, 247
Remove/install rear muffler Engine 260 in model 118, 177, 247
Check hydraulic valve clearance compensating elements Engine 260 in model 118, 177, 247
Remove/install ME-SFI control unit Engine 282 in model 118, 177, 247
Remove/install oil filter housing with heat exchanger Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install position sensor of exhaust camshaft Engine 282 in model 118, 177, 247
Remove/install rear axle differential Model 118, 177, 247 with engine 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install lower engine stabilizer mount Engine 139 in model 118, 177, 247
Correct oil level in air conditioning system if system is suddenly drained Model 118, 177, 247 with engine 260, 282, 608, 654 Model 118, 177, 247.7 with engine 139
Remove/install throttle valve actuator Engine 260 in model 118, 177, 247
Seal differential Model 118, 177, 247 with engine 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install inserted rear axle shaft Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install alternator belt pulley Engine 260 in model 118, 177, 247
Remove/install oil circuit feed line of turbochargers Engine 177 in model 217, 222
Remove install coolant return line for turbocharger Engine 282 in model 118, 177, 247
Remove/install rear axle carrier trim Model 118, 177, 247 with engine 260 with code U55 (Multi-link axle) except code M016 (Uprated engine) Model 118, 247 with engine 282, 608, 654 with code U55 (Multi-link axle) Model 177 …
Relieve fuel pressure using diagnostic system Engine 139, 260, 282 in model 118, 177, 247
Remove/install intake cylinder head cover Engine 282 in model 118, 177, 247
Install front radial shaft sealing ring Engine 282 in model 118, 177, 247
Remove/install oil feed line for turbocharger Engine 282 in model 118, 177, 247
Remove/install exhaust camshaft CAMTRONIC actuator Engine 282 in model 118, 177, 247 with code 936 (Cylinder cut-out system)
Remove/install slide rail of timing chain Engine 260 in model 118, 177, 247
Remove/install fuel tank Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install oil filter housing Engine 260 in model 118, 177, 247 except code M016 (Uprated engine)
Inspect cylinders with a light probe Engine 260, 282 in model 118, 177, 247
Remove/install piston rings Engine 260 in model 118, 177, 247
Remove/install crankshaft Engine 260 in model 118, 177, 247
Remove/install charge air distributor Engine 260 in model 118, 177, 247
Remove/install chain tensioner Engine 282 in model 118, 177, 247
Bolt plan for timing case cover Engine 260 in model 118, 177, 247
Remove/install oxygen sensor upstream of catalytic converter Engine 260 in model 118, 177, 247
Correct oil level in air conditioning system in the event of repair or slow refrigerant loss Model 118, 177, 247 with engine 260, 282, 608, 654 Model 118, 177, 247.7 with engine 139
Disconnect/connect engine wiring harness to remove fuel distributor Engine 282 in model 118, 177, 247
Remove/install exhaust camshaft adjustment solenoid Engine 282 in model 118, 177, 247
Install rear radial shaft sealing ring Engine 260 in model 118, 177, 247
Remove/install turbocharger Engine 139 in model 118, 177, 247
Remove/install oil pan Engine 260 in model 118, 177, 247
Remove/install poly-V belt Engine 139 in model 118, 177, 247
Tightening procedure for camshaft bearing bridge Engine 282 in model 118, 177, 247
Remove/install bearing for rear axle differential suspension in rear axle carrier at left front Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Perform insulation resistance measurement at stator of electric machine form Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Disconnecting and connecting harness at starter Engine 139 in model 118, 177, 247
Remove/install alternator Engine 282 in model 118, 177, 247 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Measure oil consumption Engine 260 in model 118, 177, 247
Remove/install balance shaft housing Engine 260 in model 118, 177, 247
Remove/install alternator Engine 260 in model 118, 177, 247
Set basic position of camshafts Engine 260 in model 118, 177, 247
Measure piston ring end gap Engine 260 in model 118, 177, 247
Remove/install radial shaft sealing ring of drive shaft Model 118, 177, 247 with engine 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install power take-off Transmission 724.0 in model 118, 177, 247 with engine 260 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 724.1 in model 118, 177, 247 with engine 260 with code M005 …
Remove/install camshafts Engine 260 in model 118, 177, 247
Remove/install liquid-cooled charge air cooler Engine 139 in model 118, 177, 247
Remove/install fuel tank Model 118, 177, 247 with engine 260 Model 118, 177, 247 with engine 282 except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install alternator Engine 139 in model 118, 177, 247
Remove/install poly-V-belt tensioning device Engine 260 in model 118, 177, 247
Remove/install turbocharger with exhaust manifold Engine 260 in model 118, 177, 247
Remove/install line from cartridge to inerting system in engine compartment Model 118, 177, 247 with engine 260, 282 with code 2U8 (Alternative refrigerant) Model 118, 177, 247.7 with engine 139 with code 2U8 (Alternative refrigerant)
Remove/install coolant expansion reservoir Engine 282 in model 118, 177, 247 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install high-pressure pump Engine 282 in model 118, 177, 247
Remove/install intake camshaft adjustment solenoid Engine 282 in model 118, 177, 247
Remove/install coolant thermostat Engine 260 in model 118, 177, 247
Remove/install low-pressure exhaust gas recirculation valve Engine 654 in model 118, 177, 247
Remove/install bearing for rear axle differential suspension in rear axle carrier at rear Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install exhaust cylinder head cover Engine 282 in model 118, 177, 247
Remove/install radial shaft sealing ring of electric machine Engine 282 in model 118, 177, 247 with transmission 724.120 with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))
Remove/install PTC heater booster Model 118 with engine 608, 654 Model 177 with engine 608, 654 Model 247 with engine 608, 654
Remove install coolant feed line for turbocharger Engine 282 in model 118, 177, 247
Remove/install engine hood hinge Model 118, 177
Remove/install oil separator Engine 260 in model 118, 177, 247
Remove/install filler neck of fuel tank Model 118, 177, 247 with engine 139
Remove/install oil spray nozzles (pistons) Engine 260 in model 118, 177, 247
Remove/install hydraulic valve clearance compensating elements Engine 260 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove cylinder head cover Engine 260 in model 118, 177, 247
Rear axle differential sealant path Model 118, 177, 247 with engine 260, 282, 654 with code M005 (4MATIC)
Remove/install coolant pump switchover valve Engine 608 in model 118, 177, 247
Remove/install bearing for rear axle differential suspension in rear axle carrier Model 118, 177, 247 with engine 139, 260, 282, 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install ignition coils Engine 260 in model 118, 177, 247
Remove/install divert air switchover valve Engine 260 in model 118, 177, 247 with code M016 (Uprated engine)
Remove/install high-pressure pump Engine 260 in model 118, 177, 247
Removing and installing the cam follower Engine 282 in model 118, 177, 247
Remove/install fuel distributor with fuel injectors Engine 260 in model 118, 177, 247
Remove/install catalytic converter Engine 139 in model 118, 177, 247
Remove/install poly-V-belt tensioning device Engine 139 in model 118, 177, 247
Remove/install belt pulley/vibration damper Engine 260 in model 118, 177, 247
Remove/install NOx sensor with control unit downstream of SCR catalytic converter Engine 608 in model 118, 177, 247
Remove/install coolant circuit vent line of right turbocharger Engine 177 in model 253
Remove/install coolant circuit feed line of turbochargers Engine 177 in model 253
Remove/install right turbocharger Engine 177 in model 253
Remove/install left turbocharger Engine 177 in model 253
Remove/install oil circuit return line of left turbocharger Engine 177 in model 253
Remove/install coolant circuit return line of turbochargers Engine 177 in model 253
Remove/install coolant circuit vent line of left turbocharger Engine 177 in model 253
Remove/install oil circuit return line of right turbocharger Engine 177 in model 253
Remove/install oil circuit feed line of turbochargers Engine 177 in model 253
Remove/install left boost pressure sensor downstream of throttle valve Engine 177 in model 213
Remove/install cylinder head cover trim panel Engine 608 in model 118, 177, 247
Remove/install solenoids of camshafts in right cylinder head Engine 177 in model 290
Remove/install right charge air distributor Engine 177 in model 290
Remove/install engine-side fuel system low-pressure line Engine 608 in model 118, 177, 247
Remove/install right fuel pressure sensor Engine 177 in model 217, 222
Remove/install oil pressure switch Engine 607 in model 117, 156, 246 Engine 608 in model 177, 247
Remove/install solenoids of camshafts in left cylinder head Engine 177 in model 213
Remove/install solenoids of camshafts in right cylinder head Engine 177 in model 217, 222
Remove/install left charge air distributor Engine 177 in model 213
Check alternator Engine 177 in model 290
Remove/install left fuel pressure sensor Engine 177 in model 213
Remove/install right exhaust manifold Engine 177 in model 290
Remove/install exhaust gas recirculation cooler bypass switchover valve Engine 654 in model 118, 177, 247
Remove/install left exhaust manifold Engine 177 in model 213
Check engine cooling system cap Engine 607 in model 117, 156, 176, 246 Engine 608 in model 177, 247
Remove/install left charge air temperature sensor downstream of throttle valve Engine 177 in model 253
Remove/install left charge air temperature sensor downstream of throttle valve Engine 177 in model 213
Check and measure cup tappet Engine 607 in model 117, 156, 176, 246 Engine 608 in model 118, 177, 247
Remove/install right fuel pressure sensor Engine 177 in model 290
Remove/install left boost pressure sensor downstream of throttle valve Engine 177 in model 253
Remove/install right boost pressure sensor downstream of throttle valve Engine 177 in model 290
Disconnect/connect engine wiring harness to remove right cylinder head cover Engine 177 in model 217, 222
Remove/install right charge air temperature sensor downstream of throttle valve Engine 177 in model 290
Measure vertical clearance of piston rings Engine 607 in model 117, 156, 176, 246 Engine 608 in model 118, 177, 247
Tighten screws of high-pressure exhaust gas recirculation cooler Engine 654 in model 118, 177, 247
Remove/install right high-pressure line Engine 177 in model 290
Remove/install right high-pressure line Engine 177 in model 217, 222
Replace front radial shaft sealing ring Engine 176, 177 in model 167
Remove/install piston rings Engine 176, 177 in model 167
Remove/install belt pulley Engine 177 in model 167
Remove/install coolant circuit vent line of right turbocharger Engine 177 in model 167
Remove/install left oil separator Engine 177 in model 167
Remove/install vacuum pump Engine 177 in model 167
Remove/install right secondary chain drive chain tensioner Engine 177 in model 167
Check oil pressure Engine 177 in model 167
Remove/install the tensioning device for the oil pump chain Engine 176, 177 in model 167
Remove/install hydraulic valve clearance compensating elements Engine 176, 177 in model 167
Crank engine with starter Engine 176, 177 in model 167
Remove/install coolant circuit return line of turbochargers Engine 177 in model 167
Remove/install left boost pressure sensor downstream of throttle valve Engine 177 in model 167
Check coolant thermostat heating element Engine 176, 177 in model 167
Connect cylinder leakage testing unit Engine 176, 177 in model 167 Engine 176, 177 in model 217, 222
Remove/install lift solenoid of right exhaust camshaft at rear Engine 177 in model 167
Remove/install oil pressure control valve on oil pump Engine 176, 177 in model 167
Remove/install front cover on left cylinder head Engine 176, 177 in model 167
Remove/install position sensor of left cylinder bank intake camshaft Engine 177 in model 167
Correct articulation angle of propeller shaft Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install left turbocharger Engine 177 in model 167
Remove/ install activated charcoal canister Model 167 with engine 176 Model 167 with engine 177 Model 167 with engine 256.9 Model 167 with engine 264
Remove/install position sensor of left cylinder bank exhaust camshaft Engine 177 in model 167
Check cylinders for leaks Engine 176, 177 in model 167
Remove/install right cylinder head cover Engine 177 in model 167
Remove/install valves Engine 176, 177 in model 167
Remove/install camshafts of right cylinder bank Engine 177 in model 167
Remove/install left fuel pressure sensor Engine 176, 177 in model 167
Remove/install coolant pump Engine 176, 177 in model 167
Replace valve stem seal Engine 176 in model 217, 222 Engine 176, 177 in model 167
Replace boot of vent line Engine 176 in model 167 except code 460 (Canada version) except code 494 (US version) Engine 177 in model 167 except code 460 (Canada version) except code 494 (US version) except …
Remove/install coolant circuit vent line of left turbocharger Engine 176 in model 167 Engine 177 in model 167
Remove/install heater shutoff valve Model 167 with engine 177
Replace spark plugs Engine 176 in model 167, 217, 222 Engine 176 in model 463 Engine 177 in model 205, 213, 217, 222, 253, 290 Engine 177 in model 463
Remove/install right charge air distributor Engine 177 in model 167
Remove/install left front knock sensor Engine 176, 177 in model 167
Remove/install lift solenoid of left exhaust camshaft at rear Engine 177 in model 167
Remove/install oil line between crankcase and oil pan Engine 176 in model 167 Engine 177 in model 167
Remove/install left cylinder head cover Engine 177 in model 167
Remove/install left secondary chain drive chain tensioner Engine 177 in model 167
Remove/install lift solenoid of right intake camshaft at rear Engine 177 in model 167
Remove/install piston Engine 176, 177 in model 167
Remove/install left high-pressure line Engine 177 in model 167
Remove/install left gasoline particulate filter Engine 176, 177 in model 167
Remove/install right exhaust manifold Engine 177 in model 167
Remove/install ignition coils of left cylinder bank Engine 177 in model 167
Remove/install lift solenoid of right exhaust camshaft at front Engine 177 in model 167
Remove/install right rear engine suspension lug Engine 177 in model 167
Remove/install right rear knock sensor Engine 176 in model 167 Engine 177 in model 167
Remove/install lift solenoid of right intake camshaft at front Engine 177 in model 167
Remove/install rear muffler Engine 176, 177 in model 167
Remove/install lift solenoid of left intake camshaft at front Engine 177 in model 167
Remove/install left rear engine lifting lug Engine 177 in model 167
Remove/install actuator motor for differential lock Model 167 with engine 177 with code 467 (Electronic locking differential)
Remove/install oil circuit return line of left turbocharger Engine 176 in model 167 Engine 177 in model 167
Remove/install tensioning rails on secondary chain drive Engine 176, 177 in model 167
Remove/install rear axle differential Model 167 with engine 176 Model 167 with engine 177 Model 167 with engine 256.9 Model 167 with engine 264 Model 167 with engine 274
Remove/install fuel pump control unit Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install center part of oil pan Engine 176 in model 167 Engine 177 in model 167
Disconnect/connect engine wiring harness to remove left cylinder head cover Engine 177 in model 167
Measure propeller shaft alignment with electronic propeller shaft inclinometer Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install right gasoline particulate filter Engine 176, 177 in model 167
Remove/install left exhaust manifold Engine 177 in model 167
Remove/install bottom part of oil pan Engine 176 in model 167 Engine 177 in model 167
Remove/install right turbocharger Engine 177 in model 167
Remove/install camshaft positioner of left cylinder bank Engine 176, 177 in model 167
Check length of carbon brushes on regulator ENGINE 457.9, 541.9##, 542.9## ## as of 177214, 900.9, 902.9, 904.9##, 906.9## ## as of 190708, 924.9, 926.9, 925.9
Measure oil consumption Engine 176, 177 in model 167
Remove/install primary chain drive tensioning rail Engine 176, 177 in model 167
Remove/install left cylinder head Engine 177 in model 167
Remove/install solenoids of camshafts in left cylinder head Engine 176, 177 in model 167
Remove/install coolant temperature sensor Engine 176 in model 167 Engine 177 in model 167
Remove/install slide rails on secondary chain drive Engine 176, 177 in model 167
Inspect cylinders with a light probe Engine 176, 177 in model 167
Remove/install crankshaft Engine 177 in model 167
Remove/install right high-pressure line Engine 177 in model 167
Remove/install left front engine support Engine 176, 177 in model 167
Remove/install right fuel pressure sensor Engine 176, 177 in model 167
Remove/install oil circuit return line of right turbocharger Engine 176 in model 167 Engine 177 in model 167
Remove/install lift solenoid of left exhaust camshaft at front Engine 177 in model 167
Remove/install guide pulley for refrigerant compressor poly-V-belt Engine 177 in model 167
Remove/install position sensor of right cylinder bank intake camshaft Engine 177 in model 167
Remove/install left charge air temperature sensor downstream of throttle valve Engine 176, 177 in model 167
Remove/install rear axle differential elastomer bearing Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install primary chain drive timing chain Engine 176, 177 in model 167
Remove/install radial shaft sealing rings on side of front axle differential Model 167 with engine 176, 177, 256.9, 274 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install right boost pressure sensor downstream of throttle valve Engine 177 in model 167
Remove/install right front knock sensor Engine 176, 177 in model 167
Remove/install ignition coils of right cylinder bank Engine 177 in model 167
Remove/install front cover on right cylinder head Engine 176, 177 in model 167
Test compression pressure Engine 176, 177 in model 167
Remove/install camshaft positioner of right cylinder bank Engine 176, 177 in model 167
Remove/install rear axle differential oil pan Model 167 with engine 177 Model 167 with engine 256 with code M016 (Uprated engine)
Remove/install radiator Engine 176, 177 in model 167
Remove/install upper radiator shutters Engine 176, 177 in model 167 with code 9U7 (Aerodynamic measure package control code)
Remove/install oil circuit feed line of turbochargers Engine 177 in model 167
Check hydraulic valve clearance compensating elements Engine 176, 177 in model 167
Remove/install camshafts of left cylinder bank Engine 177 in model 167
Remove/install radial shaft sealing ring on drive pinion Model 167 with engine 176, 177, 256.9, 264, 274
Remove/install heat exchanger Engine 176, 177 in model 167
Measure piston ring end gap Engine 176, 177, 178
Remove/install radial shaft sealing ring of rear axle shaft on rear axle housing Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install right oil separator Engine 177 in model 167
Replace radial shaft sealing ring on drive pinion Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install front axle Model 167 with engine 176, 177
Remove/install coolant thermostat Engine 177 in model 167
Remove/install right high-pressure fuel pump Engine 177 in model 167
Remove/install primary chain drive chain tensioner Engine 177 in model 167
Replace spark plugs Engine 177 in model 167
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 177 in model 167
Remove/install right charge air temperature sensor downstream of throttle valve Engine 176, 177 in model 167
Remove/install lift solenoid of left intake camshaft at rear Engine 177 in model 167
Empty/fill fuel tank Model 167 with engine 176, 177, 256.9, 274.9
Remove/install additional radiator Engine 177 in model 167
Remove/install left high-pressure fuel pump Engine 177 in model 167
Set basic position of camshafts Engine 177 in model 167
Remove/install secondary chain drive timing chains Engine 176, 177 in model 167
Remove/install oil pump Engine 176, 177 in model 167
Remove/install low-temperature circuit cooler Engine 176, 177 in model 167
Remove/install slide rails on primary chain drive Engine 176, 177 in model 167
Remove/install fuel pump Model 167 with engine 176, 177, 256.9, 264, 274.9
Remove/install oil pan Engine 176, 177 in model 167
Refrigerant compressor remove/install Engine 177 in model 167
Remove/install position sensor of right cylinder bank exhaust camshaft Engine 177 in model 167
Measure vertical clearance of piston rings Engine 176, 177, 178
Remove/install rear engine mount Engine 176, 177 in model 167
Remove/install right cylinder head Engine 177 in model 167
Remove/install engine oil fill level sensor Engine 176 in model 167 Engine 177 in model 167
Remove/install left rail with fuel injectors Engine 177 in model 167
Remove/install front axle differential elastomer bearing Model 167 with engine 176, 177, 256.9 Model 167 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install right rail with fuel injectors Engine 177 in model 167
Remove/install valve springs Engine 176, 177 in model 167
Replace rear radial shaft sealing ring Engine 176, 177 in model 167
Remove/install solenoids of camshafts in right cylinder head Engine 176, 177 in model 167
Remove/install rear axle shaft Model 167 with engine 176 Model 167 with engine 177 Model 167 with engine 256.9 Model 167 with engine 264 Model 167 with engine 274
Check visible area of poly-V belt for wear Engine 113.971 in model 251.075/175 Engine 156.980 in model 251.077/177
Remove/install oil pump chain Engine 176, 177 in model 167
Remove/install refrigerant compressor poly-V-belt Engine 177 in model 167
Check basic position of camshafts Engine 177 in model 167
Remove/install left charge air distributor Engine 177 in model 167
Remove/install flywheel / drive plate Engine 139 in model 118, 177, 247
Remove fuel distributor with injection valves Engine 139 in model 118, 177, 247
Remove/install oil return flow line of turbocharger Engine 139 in model 118, 177, 247
Remove/install valves Engine 139 in model 118, 177, 247
Remove/install throttle valve actuator Engine 139 in model 118, 177, 247
Remove/install oil sensor Model 118, 177, 247 with engine 139
Check oil pressure Engine 139 in model 118, 177, 247
Remove/install rear cover on cylinder head Engine 139 in model 118, 177, 247
Crank engine with starter Engine 139 in model 118, 177, 247
Remove/install injection system control unit Engine 139 in model 118, 177, 247
Remove/install cylinder head cover Engine 139 in model 118, 177, 247
Disassemble/assemble rear bumper Model 118.3/6 except code 235 (Active Parking Assist with PARKTRONIC) except code M016 (Uprated engine) Model 177.0/1/9 except code 235 (Active Parking Assist with PARKTRONIC) …
Connect cylinder leakage testing unit Engine 139 in model 118, 177, 247
Remove/install radiator Engine 139 in model 118, 177, 247
Remove/install position sensor of exhaust camshaft Engine 139 in model 118, 177, 247
Remove install engine timing Engine 139 in model 118, 177, 247
Remove/install cap with front radial shaft sealing ring Engine 139 in model 118, 177, 247
Loosen/tighten screws/bolts of charge-air distributor Engine 139 in model 118, 177, 247
Remove/install oil separator Engine 139 in model 118, 177, 247
Remove/install fuel distributor pressure and temperature sensor Engine 139 in model 118, 177, 247
Remove/install piston Engine 139 in model 118, 177, 247
Remove/install timing case cover Engine 139 in model 118, 177, 247
Remove/install fuel pump and fill level sensor Engine 139 in model 118, 177, 247
Remove/install injection valves Engine 139 in model 118, 177, 247
Check cylinders for leaks Engine 139 in model 118, 177, 247
Remove/install high-pressure pump Engine 139 in model 118, 177, 247
Test alternator diodes Engine 139 in model 118, 177, 247
Replace spark plugs Engine 139 in model 118, 177, 247
Remove/install retaining lock for crankshaft on belt side Engine 139 in model 118, 177, 247
Detach/attach front cover with radial shaft sealing ring Engine 139 in model 118, 177, 247
Turn engine to top dead center position Engine 139 in model 118, 177, 247
Remove/install low-temperature circuit cooler Engine 139 in model 118, 177, 247
Remove/install electric coolant pump for high temperature circuit Engine 139 in model 118, 177, 247
Remove/install rear axle differential control unit Model 118, 177, 247 with engine 139
Bolt plan for timing case cover Engine 139 in model 118, 177, 247
Remove/install tensioning rail Engine 139 in model 118, 177, 247
Apply sealant to oil pan Engine 139 in model 118, 177, 247
Remove/install low-temperature circuit coolant expansion reservoir Engine 139 in model 118, 177, 247
Remove/install vacuum pump Model 118, 177, 247 with engine 139
Remove install timing chain Engine 139 in model 118, 177, 247
Assemble/disassemble engine on engine assembly stand Engine 139 in model 118, 177, 247
Remove/install rail Engine 139 in model 118, 177, 247
Remove/install engine oil cooler Engine 177 in model 463 as of model year 2019
Inspect cylinders with a light probe Engine 139 in model 118, 177, 247
Apply sealant to rear cap on cylinder head Engine 139 in model 118, 177, 247
Remove/install exhaust gas temperature sensor of exhaust gas aftertreatment unit Model 118, 177, 247 with engine 139 with code 801 (YoM 20/1)
Remove/install guide bearing Engine 139 in model 118, 177, 247
Set basic position of camshafts Engine 139 in model 118, 177, 247
Check compression pressure Engine 139 in model 118, 177, 247
Loosen/tighten oil and coolant pump drive unit screws/bolts Engine 139 in model 118, 177, 247
Remove/install divert air switchover valve Engine 139 in model 118, 177, 247
Remove/install high temperature circuit coolant temperature sensor Engine 139 in model 118, 177, 247
Remove/install expansion reservoir Engine 176 in model 463 up to model year 2019 Engine 177 in model 205 Engine 279, 642.887 in model 463
Remove/install drive unit for oil and coolant pump Engine 139 in model 118, 177, 247
Remove/install coolant temperature sensor Engine 139 in model 118, 177, 247
Remove install coolant return line for turbocharger Engine 139 in model 118, 177, 247
Remove/install coolant thermostat for high temperature circuit Engine 139 in model 118, 177, 247
Remove/install oil pump with integrated vacuum pump Engine 139 in model 118, 177, 247
Remove/install condenser Engine 139 in model 118, 177, 247
Remove/install oil spray nozzles (pistons) Engine 139 in model 118, 177, 247
Remove/install solenoid camshaft Engine 139 in model 118, 177, 247
Remove/install gasoline particulate filter Engine 139 in model 118 with code 472 (Gasoline particulate filter) Engine 139 in model 177, 247 with code 598 (Gasoline particulate filter (OPF) with sensor system)
Remove/install slide rail of timing chain Engine 139 in model 118, 177, 247
Remove/install charge air distributor Engine 139 in model 118, 177, 247
Remove/install retaining lock for crankshaft/ring gear Engine 139 in model 118, 177, 247
Connecting recording-type compression tester Engine 139 in model 118, 177, 247
Remove/install camshaft positioner Engine 139 in model 118, 177, 247
Bolt tightening procedure for cylinder head cover Engine 139 in model 118, 177, 247
Remove/install high pressure line Engine 139 in model 118, 177, 247
Remove/install coolant thermostat Engine 139 in model 118, 177, 247
Remove/install position sensor of intake camshaft Engine 139 in model 118, 177, 247
Check hydraulic valve clearance compensating elements Engine 139 in model 118, 177, 247
Remove/install belt pulley/vibration damper Engine 139 in model 118, 177, 247
Remove/install cylinder head Engine 139 in model 118, 177, 247
Detach/attach holder for camshafts Engine 139 in model 118, 177, 247
Remove/install additional fan for low-temperature circuit on wheel arch at right Engine 177 in model 463 as of model year 2019
Remove/install rear radial shaft sealing ring on crankshaft Engine 139 in model 118, 177, 247
Remove/install piston rings Engine 139 in model 118, 177, 247
Remove/install valve stem seals Engine 139 in model 118, 177, 247
Remove install pressure and temperature sensor Engine 139 in model 118, 177, 247
Remove/install coolant pump Engine 139 in model 118, 177, 247
Check visible area of poly-V belt for wear Engine 139 in model 118, 177, 247
Remove/install coolant pump housing Engine 139 in model 118, 177, 247
Removing and installing the purge valve Engine 139 in model 118, 177, 247
Check regulator and alternator Engine 139 in model 118, 177, 247
Tightening procedure for cover on cylinder head Engine 139 in model 118, 177, 247
Replace valve stem seal Engine 139 in model 118, 177, 247
Remove/install low-temperature circuit coolant temperature sensor Engine 139 in model 118, 177, 247
Remove/install chain tensioner Engine 139 in model 118, 177, 247
Remove/install crankshaft Engine 139 in model 118, 177, 247
Loosen/tighten oil pan screws Engine 139 in model 118, 177, 247
Remove/install rail pressure and temperature sensor Engine 139 in model 118, 177, 247
Remove/install hydraulic valve clearance compensating elements Engine 139 in model 118, 177, 247
Remove/install knock sensors Engine 139 in model 118, 177, 247
Remove/install fuel injectors Engine 139 in model 118, 177, 247
Remove/install camshafts Engine 139 in model 118, 177, 247
Remove/install crankshaft Hall sensor Engine 139 in model 118, 177, 247
Check basic position of camshafts Engine 139 in model 118, 177, 247
Remove/install oil pan Engine 139 in model 118, 177, 247
Remove/install valve springs Engine 139 in model 118, 177, 247
Remove/install lift solenoids of exhaust camshaft Engine 139 in model 118, 177, 247
Remove/install engine oil fill level sensor Engine 139 in model 118, 177, 247
Remove/install high-temperature cooling system Engine 139 in model 118, 177, 247
Remove/install circulation pump for low-temperature water circuit Engine 139 in model 118, 177, 247
Remove/install low-pressure line Engine 139 in model 118, 177, 247
Test alternator charging current Engine 139 in model 118, 177, 247
Remove/install oil filter housing Engine 139 in model 118, 177, 247
Remove/install rear engine support Engine 139 in model 118, 177, 247