Service manual Caterpillar 352F XE Excavator with C13 Engine | MDR00001-UP

29,99 $

Format: PDF
Type: Service Manual
Pages: 6277
Size: 293 Mb
No.: MDR00001-UP

2D and 3D GRADE System for Hydraulic Excavators
– 3D System Components – Test
– Calibration
– CAN Data Link – Test
– Connector Locations
– Determining Diagnostic Trouble Codes
– Diagnostic Capabilities
– Diagnostic Trouble Codes
– Display Firmware Upgrade
– ECM – Configure
– ECM – Replace
– ECM Software – Install
– Electrical Connector – Inspect
– Electrical Power Supply – Test
– Emerging Symptom Information
– Features
– General Information
– General Information
– Machine Preparation for Troubleshooting
– Sensor (Data Link Type) – Test
– Sensor Signal (PWM) – Test
– Service Tools
– Symptom Troubleshooting
– System Accuracy – Test
– System Components
– Visual Inspection
– Wiring Harness (Open Circuit) – Test
– Wiring Harness (Short Circuit) – Test
349F XE and 352F XE Excavators Tool Control System
– Combined Function – Electric Control
– Combined Function – Electric Control: Default Value of Work
– Combined Function – Electric Control: Relief Valve (Line) –
– Control (Thumb Wheel) – Calibrate
– General Information
– Medium Pressure Hydraulic System
– Medium Pressure: Default Value of Work Tool Parameters
– Medium Pressure: Relief Valve (Line) – Test and Adjust
– Medium Pressure: Relief Valve (Main) – Test and Adjust
– One-Way/Two Pump – Electric Control
– Process for Setting Up the Work Tool
– Sensors
– Solenoid Valve (PHMV) – Calibrate – Attachment Valve #1
– Solenoid Valve (PHMV) – Calibrate – Attachment Valve PHMV
– Solenoid Valve (PHMV) – Calibrate – Attachment Valve PHMV
– Solenoid Valve (PHMV) – Calibrate – Back Pressure Setting
– Solenoid Valve (PHMV) – Calibrate – Velocity Adjustment
– Solenoid Valve (Proportional Reducing) – Calibrate –
– Solenoid Valve (Proportional Reducing) – Calibrate – Attachment
– Solenoid Valve (Proportional Reducing) – Calibrate – Main Pump
– Solenoid Valve (Proportional Reducing) – Calibrate – Variable
– Solenoid Valves
– Switches
– System Identification
– Work Tool – Select
– Work Tool Parameter – Program
Air Conditioning and Heating R134a for All Cat Machines
– General Information
– Refrigerant Orifice Tube System
– Refrigerant Compressor
– Refrigerant Compressor
– Refrigerant Compressor
– Refrigerant Condenser
– Refrigerant Condenser
– Refrigerant Receiver-Dryer
– Refrigerant Receiver-Dryer
– Refrigerant Expansion Valve
– In-line Refrigerant Dryer
– Identifying the Refrigerant
– In-line Refrigerant Dryer
– Refrigerant Orifice Tube Assembly
– Refrigerant Orifice Tube Assembly
– Evaporator Coil
– Refrigerant Accumulator
– Refrigerant Accumulator
– Refrigerant Accumulator
– Refrigerant Compressor Protection System
– Temperature Control
– Temperature Control
– Identifying the Refrigerant
– Pressure Switch (Refrigerant)
– Pressure Switch (Refrigerant)
– Cab Pressurization and Filtration System
– Cab Pressurization and Filtration System
– Cab Pressurization and Filtration System
– Condensate Drainage System
– Condensate Drainage System
– Service Intervals
– Service Intervals
– Glossary of Terms
– Identifying the Air Conditioning System
– General Troubleshooting Information
– General Troubleshooting Information
– Machine Preparation for Testing and Adjusting
– Machine Preparation for Testing and Adjusting
– Air Conditioning Performance – Test
– Refrigerant Leakage – Test
– Manifold Gauge Set (Refrigerant) – Install
– Manifold Gauge Set (Refrigerant) – Install
– Refrigerant Recovery
– Refrigerant Recovery
– Identifying the Air Conditioning System
– Refrigerant System – Flush
– Refrigerant Oil – Test
– Refrigerant Compressor – Test
– Refrigerant Compressor – Test
– Refrigerant Compressor – Test
– Refrigerant System – Evacuate
– Refrigerant System – Evacuate
– Refrigerant System – Charge
– Refrigerant System – Charge
– Manifold Gauge Set (Refrigerant) – Remove
– Identifying the Heating System
– Manifold Gauge Set (Refrigerant) – Remove
– Compressor Protection System – Test
– Compressor Protection System – Test
– Electronic Heat Control – Test
– Electronic Heat Control – Test
– Heater Performance – Test
– Heating and Air Conditioning Service Publications
– General Information
– General Information
– Machine Preparation for Disassembly and Assembly
– Refrigerant Expansion Valve System
– Air Conditioner Lines – Remove and Install
– Refrigerant Compressor – Remove and Install
– Refrigerant Accumulator – Remove and Install
– Refrigerant Expansion Valve – Remove and Install
– Refrigerant Receiver-Dryer – Remove and Install
– In-Line Refrigerant Dryer – Remove and Install
– Refrigerant Orifice Tube Assembly – Remove and Install
– Refrigerant Expansion Valve System
– Refrigerant Orifice Tube System
– General Information
Disassembly and Assembly 349F and 352F Excavators Machine Systems
– Actuator Motor (Air Distributor) – Remove and Install
– Auxiliary Pilot Valve (Straight Travel) – Assemble
– Auxiliary Pilot Valve (Straight Travel) – Disassemble
– Auxiliary Pilot Valve (Straight Travel) – Remove and Install
– Boom – Remove and Install
– Boom Bearings and Seals – Remove and Install
– Boom Cylinder – Remove and Install
– Bucket – Remove and Install
– Bucket Cylinder – Remove and Install
– Bucket Linkage – Remove and Install
– Bucket Linkage Bearings and Seals – Remove and Install
– Cab – Remove and Install
– Check Valve (Cooler Bypass) – Remove and Install
– Check Valve (Counterweight Circuit) – Remove and Install
– Control Manifold (Pilot Oil) – Assemble – Hydraulic Lockout,
– Control Manifold (Pilot Oil) – Assemble – Hydraulic Lockout,
– Control Manifold (Pilot Oil) – Disassemble – Hydraulic Lockout,
– Control Manifold (Pilot Oil) – Disassemble – Hydraulic Lockout,
– Control Manifold (Pilot Oil) – Remove and Install – Hydraulic
– Control Module (Automatic Temperature Control Unit) –
– Control Valve (Counterweight Circuit) – Assemble
– Control Valve (Counterweight Circuit) – Disassemble
– Control Valve (Counterweight Circuit) – Remove and Install
– Control Valve (Medium Pressure) – Remove and Install
– Counterbalance Valve (Travel) – Assemble
– Counterbalance Valve (Travel) – Disassemble
– Counterbalance Valve (Travel) – Remove and Install
– Counterweight – Remove and Install
– Counterweight – Remove and Install – Hydraulic System
– Counterweight Cylinder – Remove and Install
– Duo-Cone Conventional Seals – Install
– Final Drive – Assemble
– Final Drive – Assemble
– Final Drive – Disassemble
– Final Drive – Disassemble
– Final Drive and Travel Motor – Remove and Install
– Front Idler and Recoil Spring – Remove and Install
– Fuel Tank – Remove and Install
– Gear Pump (Auxiliary) – Assemble
– Gear Pump (Auxiliary) – Disassemble
– Gear Pump (Auxiliary) – Remove and Install
– Gear Pump (Pilot) – Remove and Install
– Heating and Air Conditioning Unit – Remove and Install
– Hydraulic Lockout Control – Remove and Install
– Hydraulic Tank and Filter – Assemble
– Hydraulic Tank and Filter – Disassemble
– Hydraulic Tank and Filter – Remove and Install
– Load Control Valve (Boom Cylinder) – Assemble
– Load Control Valve (Boom Cylinder) – Assemble
– Load Control Valve (Boom Cylinder) – Disassemble
– Load Control Valve (Boom Cylinder) – Disassemble
– Load Control Valve (Boom Cylinder) – Remove and Install
– Load Control Valve (Boom Cylinder) – Remove and Install
– Load Control Valve (Stick Cylinder) – Assemble
– Load Control Valve (Stick Cylinder) – Assemble
– Load Control Valve (Stick Cylinder) – Disassemble
– Load Control Valve (Stick Cylinder) – Remove and Install
– Load Control Valve (Stick Cylinder) – Remove and Install
– Main Control Valve – Assemble
– Main Control Valve – Disassemble
– Main Control Valve – Remove and Install
– Main Hydraulic Pump – Assemble
– Main Hydraulic Pump – Disassemble
– Main Hydraulic Pump – Remove and Install
– Manual Ball Valve (Counterweight Circuit) – Remove and
– Manual Valve (Boom Lowering) – Remove and Install
– Pedal Control (Work Tool) – Remove and Install
– Pilot Valve (Joystick) – Assemble
– Pilot Valve (Joystick) – Disassemble
– Pilot Valve (Joystick) – Remove and Install
– Pilot Valve (Travel) – Assemble
– Pilot Valve (Travel) – Disassemble
– Pilot Valve (Travel) – Remove and Install
– Position Sensor and Mounting (Bucket) – Remove and Install
– Pressure Reducing Valve – Remove and Install – Boom Priority
– Pressure Reducing Valve – Remove and Install – Medium
– Pressure Switch (Refrigerant Pressure Cutoff) – Remove and
– Pump Drive Coupling – Remove and Install
– Recoil Spring – Assemble
– Recoil Spring – Disassemble
– Refrigerant Receiver-Dryer – Remove and Install
– Relief Valve (Pilot) – Remove and Install
– Seat – Remove and Install
– Seat Support – Remove and Install
– Seat Suspension – Remove and Install
– Shuttle Valve – Remove and Install – Pilot Oil
– Shuttle Valve – Remove and Install – Straight Travel
– Solenoid Valve (Auxiliary Circuit) – Remove and Install – Tool
– Solenoid Valve (Counterweight Circuit) – Assemble
– Solenoid Valve (Counterweight Circuit) – Disassemble
– Solenoid Valve (Counterweight Circuit) – Remove and Install
– Solenoid Valve (Negative Flow Control, Proportional Reducing
– Solenoid Valve (Negative Flow Control, Proportional Reducing
– Solenoid Valve (Negative Flow Control, Proportional Reducing
– Solenoid Valve (Quick Coupler) – Remove and Install
– Solenoid Valve (Two-Way Flow and One Pump/Two Pump) –
– Sprocket – Remove and Install
– Stick – Remove and Install
– Stick Bearings and Seals – Remove and Install
– Stick Cylinder – Remove and Install
– Storage Box and Covers (Cab) – Remove and Install
– Swing Cushion Valve – Remove and Install
– Swing Cushion Valve – Remove and Install – Fine Swing
– Swing Drive – Assemble
– Swing Drive – Disassemble
– Swing Drive – Remove and Install
– Swing Gear and Bearing – Install
– Swing Gear and Bearing – Remove
– Swing Motor – Assemble
– Swing Motor – Disassemble
– Swing Motor – Remove and Install
– Swivel – Assemble
– Swivel – Disassemble
– Swivel – Remove and Install
– System Pressure – Release
– Track – Connect – Press Fit Master Pin)
– Track – Separate – Press Fit Master Pin
– Track Adjuster – Assemble
– Track Adjuster – Disassemble
– Track Adjuster – Remove and Install
– Track Carrier Roller – Remove and Install
– Track Roller – Remove and Install
– Travel Motor – Assemble
– Travel Motor – Assemble
– Travel Motor – Disassemble
– Travel Motor – Disassemble
– Travel Motor – Remove and Install
– Upper Frame and Undercarriage Frame – Connect
– Upper Frame and Undercarriage Frame – Separate
– Window Wiper Motor – Remove and Install
Disassembly and Assembly C13 Engine for Caterpillar Built Machines
– Accessory Drive – Remove and Install – Brackets and Pulleys
– Air Control Valve – Remove and Install
– Air Inlet Elbow – Remove and Install
– Alternator – Remove and Install
– Atmospheric Pressure Sensor – Remove and Install
– Bearing Clearance – Check
– Belt Tensioner – Remove and Install
– Boost Pressure Sensor – Remove and Install
– Camshaft – Remove and Install
– Camshaft Bearings – Remove and Install
– Camshaft Gear – Remove and Install
– Camshaft Position Sensor – Remove and Install
– Catalyst (SCR) – Remove and Install
– Combustion Head – Remove and Install
– Connecting Rod Bearings – Remove and Install
– Coolant Temperature Sensor – Remove and Install
– Crankcase Pressure Sensor – Remove and Install
– Crankshaft – Remove and Install
– Crankshaft Front Seal – Remove and Install
– Crankshaft Main Bearings – Remove and Install
– Crankshaft Position Sensor – Remove and Install
– Crankshaft Rear Seal – Remove and Install
– Cylinder Head – Remove and Install
– Cylinder Liner – Remove and Install
– DEF Injector and Mounting – Remove and Install
– Diesel Exhaust Fluid Filter – Remove and Install
– Diesel Exhaust Fluid Module – Assemble
– Diesel Exhaust Fluid Module – Disassemble
– Diesel Exhaust Fluid Pump – Remove and Install
– Diesel Particulate Filter – Remove and Install
– Disconnecting Snap To Connect Fittings
– Electric Starting Motor – Remove and Install
– Electronic Control (Aftertreatment) – Remove and Install
– Electronic Control (Diesel Exhaust Fluid) – Remove and Install
– Electronic Unit Injector – Remove and Install
– Electronic Unit Injector Sleeve – Remove and Install
– Engine Control Module – Remove and Install
– Engine Oil Cooler – Remove and Install
– Engine Oil Filter Base – Remove and Install
– Engine Oil Pan – Remove and Install
– Engine Oil Pressure Sensor – Remove and Install
– Engine Oil Pump – Assemble
– Engine Oil Pump – Disassemble
– Engine Oil Pump – Remove and Install
– Exhaust Cooler (NRS) – Remove and Install
– Exhaust Elbow – Remove and Install
– Exhaust Gas Valve (NRS) – Assemble
– Exhaust Gas Valve (NRS) – Disassemble
– Exhaust Gas Valve (NRS) – Remove and Install
– Exhaust Manifold – Remove and Install
– Flywheel – Remove and Install
– Flywheel Housing – Remove and Install
– Front Cover – Remove and Install
– Fuel Filter Base – Remove and Install
– Fuel Manifold (ARD) – Remove and Install
– Fuel Pressure Regulator – Remove and Install
– Fuel Pressure Sensor – Remove and Install
– Fuel Priming Pump – Remove and Install
– Fuel Temperature Sensor – Remove and Install
– Fuel Transfer Pump – Remove and Install
– Fumes Disposal Filter – Remove and Install
– Gear Group (Front) – Remove and Install
– Housing (Front) – Remove and Install
– Ignition Coil – Remove and Install
– Inlet Air Temperature Sensor – Remove and Install
– Inlet and Exhaust Valve Guides – Remove and Install
– Inlet and Exhaust Valve Seat Inserts – Remove and Install
– Inlet and Exhaust Valve Springs – Remove and Install
– Inlet and Exhaust Valves – Remove and Install
– Inlet Module (Catalyst) – Remove and Install
– Lifter Group – Remove and Install
– Manifold (DEF Heater) – Remove and Install
– Nitrogen Oxide Sensor – Remove and Install
– Nozzle Heater Harness – Remove and Install
– Piston Cooling Jets – Remove and Install
– Piston Cooling Jets – Remove and Install
– Pistons and Connecting Rods – Assemble
– Pistons and Connecting Rods – Disassemble
– Pistons and Connecting Rods – Remove and Install
– Pressure Sensor (ARD Combustion Air) – Remove and Install
– Pressure Sensor (Cooled Exhaust Gas) – Remove and Install
– Pressure Sensor (DPF) – Remove and Install
– Pressure Sensor (NRS Absolute) – Remove and Install
– Pressure Sensor (NRS Differential) – Remove and Install
– Refrigerant Compressor – Remove and Install
– Relay (ARD Nozzle Heater) – Remove and Install
– Rocker Arm – Assemble
– Rocker Arm – Disassemble
– Rocker Arm and Shaft – Remove and Install
– Solenoid Valve (ARD Main Fuel) – Remove and Install
– Solenoid Valve (DEF Heater Coolant) – Remove and Install
– Solenoid Valve (Exhaust Balance) – Remove and Install
– Temperature Sensor (Catalyst Inlet) – Remove and Install
– Temperature Sensor (Cooled Exhaust Gas) – Remove and
– Temperature Sensor (DPF Inlet, Flame Detect) – Remove and
– Turbocharger – Remove and Install
– Valve Actuator (Variable) – Remove and Install
– Valve Mechanism Cover – Remove and Install
– Valve Mechanism Cover Base – Remove and Install
– Venturi Tube – Remove and Install
– Vibration Damper and Pulley – Remove and Install
– Voltage Control (Load Protection) – Remove and Install
– Water Pump – Assemble
– Water Pump – Disassemble
– Water Pump – Remove and Install
– Water Temperature Regulator Housing – Remove and Install
Hydraulic Power Units Air Conditioning and Heating
– Air Conditioning and Heating System
– Air Conditioning and Heating System Sensor Operation
– Air Conditioning and Heating System Relay Operation
– Control Panel (Air Conditioner and Heater)
– Control Module
– Fan Control (Blower Motor)
– Heater Core (Cab)
– Air Conditioning System Electrical Schematic
– Air Conditioning System Electrical Schematic
– Machine Preparation for Troubleshooting
– General Troubleshooting Information
– Refrigerant Compressor
– Visual Inspection
– Troubleshooting Faults With Service Codes
– Air Conditioning E11 – Intake Air Temperature Sensor (Open
– Air Conditioning E12 – Intake Air Temperature Sensor (Short
– Air Conditioning E13 – Ambient Air Temperature Sensor
– Air Conditioning E14 – Ambient Air Temperature Sensor
– Air Conditioning E15 – Water Temperature Sensor (Short
– Air Conditioning E16 – Water Temperature Sensor (Short
– Air Conditioning E21 – Evaporator Sensor (Open Circuit)
– Air Conditioning E21 – Evaporator Sensor (Open Circuit)
– Refrigerant Condenser
– Air Conditioning E22 – Evaporator Sensor (Short Circuit)
– Air Conditioning E43 – Air Outlet Damper Error
– Air Conditioning E44 – Air Blend Damper Error
– Air Conditioning E45 – Air Inlet Damper Error
– Air Conditioning and Heating System Troubleshooting
– Air Conditioning Performance – Test
– Required Tools
– Refrigerant Recovery
– Manifold Gauge Set (Refrigerant) – Install
– Refrigerant System – Evacuate
– Refrigerant Receiver-Dryer
– Refrigerant System – Flush
– Refrigerant Leakage – Test
– Refrigerant Compressor Oil – Check
– Refrigerant System – Charge
– Manifold Gauge Set (Refrigerant) – Remove
– Pressure Switch (Refrigerant Pressure Cutoff)
– Refrigerant Expansion Valve
– Evaporator Coil
– Blower Motor
– Motor (Air Conditioner Control)
– General Information
Schematic Caterpillar 349F XE and 352F XE Excavator Electrical System
– Feature
– Cover Page
– Information
– Component Location
– Volume 1 of 4 – Chassis and Engine Wiring
– Page 1 of 2
– Page 2 of 2
– Volume 2 of 4 – Cab Wiring
– Page 1 of 2
– Page 2 of 2
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Page 1 of 2
– Page 2 of 2
– Volume 4 of 4 – Engine Option Wiring
– Connector Location
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Schematics
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Machine Views
– Volume 1 of 4 – Chassis and Engine Wiring
– Breaker Box
– Engine View
– Front View of Machine
– LH View of Chassis
– Rear View of Machine
– RH View of Chassis
– Volume 2 of 4 – Cab Wiring
– LH View of Cab
– Platform
– RH View of Cab
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Behind Seat
– Cab – Back View
– Cab
– LH View of ACS Valve
– RH View of ACS Valve
– Stick
– Volume 4 of 4 – Engine Option Wiring
– Back View of Engine
– Front View of Engine
– PETU
Schematic Caterpillar 349F XE and 352F XE Excavator Electrical System
– Feature
– Cover Page
– Information
– Component Location
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Connector Location
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Schematics
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Machine Views
– Volume 1 of 4 – Chassis and Engine Wiring
– Engine View
– Front View of Machine
– LH View of Chassis
– Rear View of Machine
– RH View of Chassis
– Volume 2 of 4 – Cab Wiring
– LH View of Cab
– Platform
– RH View of Cab
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Behind Seat
– Boom and Stick
– Cab – Back View
– Cab
– LH View of ACS Valve
– RH View of ACS Valve
– Volume 4 of 4 – Engine Option Wiring
– Back View of Engine
– Front View of Engine
– PETU
Schematic Caterpillar 349F XE and 352F XE Excavator Hydraulic System – Attachment
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Cab
– Machine Component Locations
– Main Control Valve
– Main Hydraulic Pump
– Swing Motors
Schematic Caterpillar 349F XE and 352F XE Excavator Hydraulic System – Attachment
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Cab Bottom View
– Machine Component Locations
– Main Control Valve
– Pump Compartment
– Swing Motors And Medium Pressure Control
Schematic Caterpillar 349F XE and 352F XE Excavator Hydraulic System – Attachment
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Cab
– Machine Component Locations
– Main Control Valve
– Main Hydraulic Pump
– Quick Coupler
– Swing Motors
Schematic Caterpillar 349F XE and 352F XE Excavator Hydraulic System – Attachment
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Boom Control
– Cab
– Machine Component Locations
– Main Control Valve
– Main Hydraulic Pump
– Swing Motors
Schematic Caterpillar 349F XE and 352F XE Excavator Hydraulic System – Attachment
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Boom Control
– Cab
– Machine Component Locations
– Main Control Valve
– Main Hydraulic Pump
– Stick Control
– Swing Motors
Schematic Caterpillar 349F XE and 352F XE Excavator Hydraulic System
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Cab
– Machine Component Locations
– Main Control Valve
– Main Hydraulic Pump
– Swing Motors
Schematic Caterpillar 352F XE Excavator Hydraulic System – Attachment
– Features
– Cover Page
– Information
– Component Location
– Tap Location
– Schematic
– Machine Views
– Cab
– Machine Component Locations
– Main Control Valve
– Main Hydraulic Pump
– Swing Motors
Schematic Caterpillar Air Conditioning Electrical System
Schematic Caterpillar Electrical System 349F XE and 352F XE Excavator
– Feature
– Cover Page
– Information
– Component Location
– Volume 1 of 4 – Chassis and Engine Wiring
– Page 1 of 2
– Page 2 of 2
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Page 1 of 2
– Page 2 of 2
– Volume 4 of 4 – Engine Option Wiring
– Connector Location
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Schematics
– Volume 1 of 4 – Chassis and Engine Wiring
– Volume 2 of 4 – Cab Wiring
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Volume 4 of 4 – Engine Option Wiring
– Machine Views
– Volume 1 of 4 – Chassis and Engine Wiring
– Engine View
– Front View of Machine
– LH View of Chassis
– Rear View of Machine
– RH View of Chassis
– Volume 2 of 4 – Cab Wiring
– LH View of Cab
– Platform
– RH View of Cab
– Volume 3 of 4 – ACS Valve, CAT Grade Control and Product Link
– Behind Seat
– Cab – Back View
– Cab
– LH View of ACS Valve
– RH View of ACS Valve
– Stick
– Volume 4 of 4 – Engine Option Wiring
– Back View of Engine
– Front View of Engine
– PETU
Specifications 349F XE and 352F XE Excavators Machine System
– Accumulator (Pilot)
– Air Cleaner
– Air Conditioner and Mounting
– Air Conditioner Lines
– Air Lines
– Auxiliary Hydraulic Lines – Coupler Lines
– Auxiliary Hydraulic Lines – Stick
– Battery and Mounting
– Boom – 6.6 m (21.65 ft)
– Boom – 6.9 m (22.64 ft)
– Boom Cylinder
– Boom Cylinder Lines
– Boom Cylinder Lines
– Boom Lighting
– Boom Lighting
– Boom Lines
– Boom Lines
– Bucket Adjuster
– Bucket Adjuster – VB Family
– Bucket Cylinder
– Bucket Cylinder Lines
– Bucket Cylinder Lines
– Bucket Linkage
– Bucket Linkage – VB Family
– Cab
– Cab
– Cab – Front Window Guard
– Cab Air Duct
– Chassis Lighting
– Check Valve
– Check Valve
– Check Valve
– Check Valve
– Clamp (Exhaust)
– Control Lines
– Control Manifold (Pilot Oil)
– Control Valve
– Control Valve
– Control Valve
– Control Valve
– Control Valve
– Control Valve (Boom Lowering)
– Control Valve (Boom Lowering) – Manual
– Control Valve (Counterweight)
– Control Valve (Stick Lowering)
– Control Valve and Mounting
– Cooling Lines
– Counterweight Cylinder
– Coupler Lines
– Coupler Lines
– Cylinder Guard
– Cylinder Mounting
– Diesel Exhaust Fluid Lines
– Diesel Exhaust Fluid Tank Mounting
– Engine Mounting
– Fan Control Solenoid Valve
– Fan Drive
– Fan Drive
– Fan Drive Pump
– Fasteners
– Fasteners – Swing Drive and Motor
– Final Drive
– Flood Lamp
– Flood Lamp
– Front Idler
– Front Idler
– Front Lines
– Front Lines
– Front Lines
– Fuel Lines
– Fuel Tank
– Fuel Tank
– Grease Lines
– Grease Lines
– Handle Control (Travel)
– Handrail
– Hoist Solenoid Valve
– Hoist Solenoid Valve
– Hydraulic Oil Cooler Lines Group
– Hydraulic Oil Lines
– Hydraulic Pedal Control (Auxiliary)
– Hydraulic Tank and Filter
– Hydraulic Tank and Mounting
– Joystick Control
– Lines (Rear Attachment)
– Main Control Valve
– Main Hydraulic Pump
– Main Hydraulic Pump Mounting
– Manifold and Reducing Valve (Pilot Oil)
– Oil Filter (Hydraulic) – Case Drain
– Oil Filter (Return)
– Oil Filter (Return)
– Operator Console
– Pedal Control (Auxiliary)
– Pilot Lines
– Pilot Lines
– Pilot Lines
– Pilot Lines
– Pilot Oil Filter and Relief Valve
– Pilot Valve (Auxiliary)
– Pilot Valve (Travel)
– Position Sensor (Boom)
– Pressure Sensor – Accumulator
– Pressure Sensor – BOOM DOWN
– Protection Visor
– Pump Coupling
– Pump Head (Main)
– Pump Lines (Main)
– Quick Coupler Lock
– Radiator Shroud
– Rear View Mirror
– Recoil Spring
– Relief Valve (Line)
– Relief Valve (Pilot)
– Relief Valve (Pilot)
– Relief Valve (Pilot)
– Relief Valve (Swing Pressure)
– Rollover Protective Structure (ROPS) Mounting
– Solenoid Valve
– Solenoid Valve
– Solenoid Valve (Counterweight Control)
– Solenoid Valve (Proportional Reducing)
– Solenoid Valve (Quick Coupler)
– Speed Sensor (Fan Drive)
– Sprocket
– Stick
– Stick – 3.4 m (11.15 ft)
– Stick Cylinder
– Stick Cylinder Lines
– Stick Cylinder Lines
– Stick Lines
– Storage Box and Mounting
– Suction Fan
– Swing Cushion Valve
– Swing Cushion Valve with Fine Swing Solenoid Valve
– Swing Drive – Left Swing Drive and Right Swing Drive
– Swing Gear and Bearing
– Swing Motor
– Swing Motor Lines
– Swivel
– Track
– Track
– Track Adjuster
– Track Carrier Roller
– Track Roller (Single Flange)
– Track Roller Mounting
– Track Roller Mounting
– Travel Counterbalance Valve
– Travel Motor
– Travel Motor Lines
– Upper Frame
– Vandalism Guard
– Window Wiper
– Window Wiper and Washer
– Window Wiper and Washer
– Window Wiper and Wiper Motor
– Wiring (Auxiliary Start Receptacle)
– Wiring (Cab)
– Wiring (Chassis)
– Wiring (Clean Emissions Module)
– Wiring (Fine Swing)
– Wiring (Platform)
Specifications C13 Tier 4 Final Engines
– Air Cleaner
– Air Cleaner
– Air Inlet Elbow
– Air Inlet Elbow
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Lines
– Air Precleaner
– Air Precleaner
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Alternator and Regulator
– Atmospheric Pressure Sensor
– Atmospheric Pressure Sensor
– Atmospheric Pressure Sensor
– Belt Tensioner
– Belt Tensioner
– Belt Tensioner
– Belt Tensioner – Alternator and Compressor
– Boost Pressure Sensor
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Camshaft
– Connecting Rod
– Connecting Rod
– Connecting Rod
– Connecting Rod
– Connecting Rod
– Connecting Rod Bearing Journal
– Connecting Rod Bearing Journal
– Connecting Rod Bearing Journal
– Connecting Rod Bearing Journal
– Connecting Rod Bearing Journal
– Coolant Temperature Sensor
– Coolant Temperature Sensor
– Coolant Temperature Sensor
– Coolant Temperature Sensor
– Coolant Temperature Sensor
– Crankcase Pressure Sensor
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft
– Crankshaft Seals
– Crankshaft Seals
– Crankshaft Seals
– Crankshaft Seals
– Crankshaft Seals
– Cylinder Block
– Cylinder Block
– Cylinder Block
– Cylinder Block
– Cylinder Block
– Cylinder Block
– Cylinder Head
– Cylinder Head
– Cylinder Head
– Cylinder Head
– Cylinder Head
– Cylinder Head
– Cylinder Head
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Head Valves
– Cylinder Liner
– Cylinder Liner
– Cylinder Liner
– Cylinder Liner
– Cylinder Liner
– Diesel Exhaust Fluid Lines
– Diesel Exhaust Fluid Lines
– Diesel Exhaust Fluid Pump
– Diesel Exhaust Fluid Pump
– Diesel Exhaust Fluid Pump
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank
– Diesel Exhaust Fluid Tank – Mounting
– Diesel Exhaust Fluid Tank – Mounting
– Diesel Particulate Filter
– Diesel Particulate Filter
– Diesel Particulate Filter
– Diesel Particulate Filter
– Diesel Particulate Filter
– Diesel Particulate Filter
– Diesel Particulate Filter
– Diesel Particulate Filter
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electric Starting Motor
– Electronic Control (Diesel Exhaust Fluid)
– Electronic Control (Diesel Exhaust Fluid)
– Electronic Unit Injector
– Electronic Unit Injector
– Electronic Unit Injector Mechanism
– Electronic Unit Injector Rocker Arm
– Electronic Unit Injector Wiring
– Electronic Unit Injector Wiring
– Engine Design
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Filter Base
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pan
– Engine Oil Pressure Sensor
– Engine Oil Pressure Sensor
– Engine Oil Pressure Sensor
– Engine Oil Pressure Sensor
– Engine Oil Pressure Sensor
– Engine Oil Pressure Sensor
– Engine Oil Pump
– Engine Oil Pump
– Engine Support (Front)
– Engine Support (Front)
– Engine Support (Front)
– Engine Support (Front)
– Engine to Transmission Adapter
– Engine to Transmission Adapter
– Exhaust Combustion (ARD)
– Exhaust Combustion (ARD)
– Exhaust Combustion (ARD)
– Exhaust Combustion (ARD) and Mounting
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Diffuser Adapter
– Exhaust Elbow
– Exhaust Gas Valve (NRS)
– Exhaust Gas Valve (NRS)
– Exhaust Gas Valve (NRS)
– Exhaust Lines
– Exhaust Lines
– Exhaust Lines (DPF Inlet)
– Exhaust Lines (DPF Inlet)
– Exhaust Lines (DPF Inlet)
– Exhaust Lines (DPF Inlet)
– Exhaust Lines (DPF Inlet)
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Exhaust Manifold
– Fan Drive
– Fan Drive
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing
– Flywheel Housing Cover
– Flywheel Housing Cover
– Flywheel Housing Cover
– Flywheel Housing Cover
– Flywheel Housing Cover
– Front Housing and Covers
– Front Housing and Covers
– Front Housing and Covers
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Filter Base
– Fuel Manifold (ARD)
– Fuel Manifold (ARD)
– Fuel Pressure Regulator
– Fuel Pressure Regulator
– Fuel Pressure Sensor
– Fuel Pressure Sensor
– Fuel Priming Pump and Primary Fuel Filter – With Water
– Fuel Priming Pump and Primary Fuel Filter – With Water
– Fuel Temperature Sensor
– Gear Group (Front)
– Gear Group (Front)
– Gear Group (Front)
– Gear Group (Front)
– Gear Group (Front)
– Gear Group (Front)
– Gear Group (Rear)
– Gear Group (Rear)
– Idler Pulley
– Injector (Diesel Exhaust Fluid)
– Inlet Manifold Air Pressure Sensor
– Inlet Manifold Air Pressure Sensor
– Inlet Manifold Air Pressure Sensor
– Inlet Manifold Air Pressure Sensor
– Inlet Manifold Air Pressure Sensor
– Inlet Manifold Air Pressure Sensor
– Inlet Manifold Temperature Sensor
– Inlet Manifold Temperature Sensor
– Inlet Manifold Temperature Sensor
– Inlet Manifold Temperature Sensor
– Inlet Manifold Temperature Sensor – Charge Air Cooler Outlet
– Main Bearing Journal
– Main Bearing Journal
– Mounting Frame
– Mounting Straps
– Nitrogen Oxide Sensor
– Nitrogen Oxide Sensor
– Nitrogen Oxide Sensor – Engine Exhaust Out
– Nitrogen Oxide Sensor – Exhaust Pipe Out
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston and Rings
– Piston Cooling Jet
– Piston Cooling Jet
– Pressure Sensor (ARD Combustion Air)
– Pressure Sensor (DPF Inlet)
– Pressure Sensor (Exhaust Differential)
– Pressure Sensor (NRS Absolute)
– Pressure Sensor (NRS Differential)
– Radiator
– Radiator
– Radiator
– Relay (ARD Nozzle Heater)
– Relay (ARD Nozzle Heater)
– Rocker Shaft
– Solenoid Valve
– Solenoid Valve – Air Control Valve Gp
– Solenoid Valve – Air Control Valve Gp
– Soot Antenna
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Speed/Timing Sensor
– Temperature Sensor (Catalyst Inlet)
– Temperature Sensor (DPF Inlet, Flame Detect)
– Temperature Sensor (DPF Inlet, Flame Detect)
– Temperature Sensor (NOx Reduction System)
– Temperature Sensor (NOx Reduction System)
– Temperature Sensor (NOx Reduction System)
– Throttle Position Sensor
– Throttle Position Sensor
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Turbocharger
– Valve Actuator
– Valve Actuator
– Valve Actuator
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Mechanism Cover
– Valve Rocker Arm
– Valve Rocker Arm
– Water Lines
– Water Lines
– Water Lines
– Water Lines
– Water Lines
– Water Lines
– Water Lines
– Water Lines
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump
– Water Pump – Separate Circuit Water Pump
– Water Temperature Regulator
– Water Temperature Regulator
– Water Temperature Regulator
– Water Temperature Regulator Housing
– Wiring (Jacket Water Heater)
– Wiring (Jacket Water Heater)
– Wiring (Jacket Water Heater)
– Wiring (Jacket Water Heater)
– Wiring (Jacket Water Heater)
Systems Operation 349F XE and 352F XE Excavators Hydraulic System
– Accumulator (Pilot)
– Boom Cylinder
– Boom System
– Bucket Cylinder
– Bucket System
– Bypass Valve (Return) – Bypass Check Valve
– Check Valve (Load)
– Check Valve (Return Makeup) – Slow Return Check Valve
– Control Valve (Straight Travel)
– Counterweight (Removal and Installation Hydraulic System)
– Displacement Change Valve
– Electronic Control (Boom System)
– Electronic Control (Bucket System)
– Electronic Control (Machine System)
– Electronic Control (Main Control Valve)
– Electronic Control (Main Pump System)
– Electronic Control (Pilot System)
– Electronic Control (Stick System)
– Electronic Control (Swing System)
– Electronic Control (Travel System)
– Engine Control
– Final Drive
– Gear Pump (Pilot)
– General Information (Boom System)
– General Information (Bucket System)
– General Information (Machine System)
– General Information (Main Control Valve)
– General Information (Main Pump System)
– General Information (Pilot System)
– General Information (Return System)
– General Information (Stick System)
– General Information (Swing System)
– General Information (Travel System)
– Graphic Color Codes
– Hydraulic Filter (Pilot)
– Hydraulic Oil Cooler
– Hydraulic Tank and Filter
– Joystick Control
– Machine System
– Main Control Valve
– Main Control Valve – (If Equipped)
– Main Hydraulic Pump
– Negative Flow Control System
– Oil Filter (Return) – Case Drain Filter
– Oil Makeup (Swing System)
– Oil Makeup (Travel System)
– Pilot System
– Pilot Valve (Swing Parking Brake)
– Pilot Valve (Travel)
– Pump Control (Main Hydraulic) – Main Pump Regulator
– Relief Valve (Cushion Crossover) – Anti-Reaction Valves
– Relief Valve (Line)
– Relief Valve (Main)
– Relief Valve (Pilot)
– Relief Valve (Swing)
– Return Hydraulic System
– Solenoid Valve (Hydraulic Lockout)
– Solenoid Valve (Proportional Reducing) – Power Shift System
– Stick Cylinder
– Stick System
– Swing Drive
– Swing Motor
– Swing System
– Swivel
– Travel Counterbalance Valve
– Travel Motor
– Travel Parking Brake
– Travel System
Systems Operation F Series Excavator Monitoring System
– Calibration Menu
– Configuration Menu
– Controls Setup Menu – If Equipped
– Current Totals Menu
– Data Link
– Device Test Menu
– Diagnostic Menu
– Display Setting Menu
– ECM Summary Menu
– Engine Shutdown Setting Menu
– General Information
– Input Components
– Language Select Menu
– Maintenance Intervals Menu
– Menu Outline
– Override Parameters Menu
– Password Change Menu
– Password Entry
– Performance Menu
– Power Mode Setting Menu
– Prestart Monitoring Function – If Equipped
– Reverse Fan Setting Menu – If Equipped
– Service Menu
– Status Menu
– System Schematic
– Tool Programming Menu
– Warning Operation
– WinFlash Menu
– Work Tool Select Menu
Testing and Adjusting 349F XE and 352F XE Excavators Hydraulic System
– Accumulator (Pilot) – Test and Charge
– BLCV and SLCV – Calibrate – If Equipped
– Boom Swing Priority – Adjust
– Cylinder Drift – Check – Empty Bucket
– Cylinder Drift – Check – Loaded Bucket
– Cylinder Speed – Check
– Engine Cooling Fan – Calibrate
– Engine Performance – Test – Engine Speed
– Gear Pump (Pilot) – Test
– General Testing and Adjusting Information
– Hydraulic System Warm-Up
– Joystick and Pedal – Calibrate
– Machine Drift on a Slope – Check
– Main Control Valve – Calibrate
– Main Pump (Flow) – Test – Hydraulic Power
– Operational Checks
– Overload Warning – Set – If Equipped
– Power Shift Pressure – Calibrate
– Power Shift Pressure – Check
– Pump Control (Negative Flow) – Adjust
– Pump Control (Negative Flow) – Test
– Pump Control (Output Flow) – Adjust
– Pump Control (Output Flow) – Test – One Pump Calibration
– Relief Valve (Counterweight Cylinder) – Test and Adjust
– Relief Valve (Crossover) – Test and Adjust
– Relief Valve (Line) – Test and Adjust
– Relief Valve (Main) – Test and Adjust
– Relief Valve (Pilot) – Test and Adjust
– Relief Valve (Swing) – Test and Adjust
– Specifications
– Swashplate – Calibrate
– Swing Bearing Movement – Measure
– Swing Motor – Test – Measurement of Case Drain Oil
– Swing Speed and Overswing on Level Ground – Check
– Swing Speed and Swing Drift on a Slope – Check
– Swing Valve – Calibrate
– System Pressure – Release
– Travel Motor – Test – Measurement of Case Drain Oil
– Travel on Level Ground – Test
– Travel on Level Ground – Test – Optional Test
– Visual Inspection
Troubleshooting 349F XE and 352F XE Excavators
– Alarm – Test
– Boom Down (Single Function) Speed Is Slow
– Boom Down Does Not Function
– Boom Down Does Not Respond To Progressive Joystick Motion
– Boom Hydraulic System – Health Check
– Boom Up (Single Function) Speed Is Slow
– Boom Up Does Not Function
– Boom Up Does Not Respond To Progressive Joystick Motion
– Bucket Close (Single Function) Speed Is Slow
– Bucket Close Does Not Function
– Bucket Close Does Not Respond To Progressive Joystick
– Bucket Open (Single Function) Speed Is Slow
– Bucket Open Does Not Function
– Bucket Open Does Not Respond To Progressive Joystick
– Bypass Valve (ACS Valve) – Functional Test
– CAN Data Link – Test
– Connector Contact Description
– Connector Locations
– Determining Diagnostic Trouble Codes
– Diagnostic Capabilities
– Diagnostic Trouble Codes
– Dig Force Is Weak
– Drift Reduction Valve – Functional Test
– ECM – Configure
– ECM – Replace
– ECM Software – Install
– Electrical Connector – Inspect
– Electrical Power Supply – Test
– Emerging Symptom Information
– Event Codes
– Flow Combiner Valve – Functional Test
– General Information
– Hydraulic Power – Functional Test
– Hydraulic System Warm-Up – Functional Test
– Implement Operation Is Uncontrollable During Travel
– IMV Calibration – Functional Test
– IMV Controllability Troubleshooting
– Joystick – Functional Test
– Manual Hydraulic Valve – Health Check
– Pump Swash Plate – Health Check
– Relay – Test
– Relief Valve (Line) – Functional Test
– Relief Valve (Main) – Functional Test
– Sensor Signal (Analog, Passive) – Test
– Sensor Signal (PWM) – Test
– Sensor Supply – Test
– Service Tools
– Solenoid Return – Test
– Solenoid Valve (Switch Controlled) – Test
– Solenoid Valve – Test
– Stick Hydraulic System – Health Check
– Stick In (Single Function) Speed Is Slow
– Stick In Does Not Function
– Stick In Does Not Respond To Progressive Joystick Motion
– Stick Out (Single Function) Speed Is Slow
– Stick Out Does Not Function
– Stick Out Does Not Respond To Progressive Joystick Motion
– Straight Travel – Functional Test
– Swing Brake – Functional Test
– Swing Does Not Function
– Swing Speed Is Slow
– Swing Velocity Is Not Smooth
– Switch Circuits – Test
– Symptom Troubleshooting
– System Schematic
– Track (LH) Does Not Travel
– Track (RH) Does Not Travel
– Travel Pilot Valve – Functional Test
– Travel Speed Is Slow
– Window Wiper Delay – Test
– Wiring Harness (Open Circuit) – Test
– Wiring Harness (Short Circuit) – Test

Reviews

There are no reviews yet.

Be the first to review “Service manual Caterpillar 352F XE Excavator with C13 Engine | MDR00001-UP”

Your email address will not be published. Required fields are marked *

CAPTCHA ImageChange Image