Service manual Komatsu PC45MR-5 30001 & Up, PC55MR-5 20001 & Up | SEN06574-07

Komatsu PC45MR-5 30001 & Up, PC55MR-5 20001 & Up SEN06574-07 (Preview)

COVER
00 INDEX AND FOREWORD
INDEX
ABBREVIATION LIST
FOREWORD, SAFETY, BASIC INFORMATION
HOW TO READ THE SHOP MANUAL
SAFETY NOTICE FOR OPERATION
PRECAUTIONS TO PREVENT FIRE
ACTIONS IF FIRE OCCURS
PRECAUTIONS FOR DISPOSING OF WASTE MATERIALS
PRECAUTIONS FOR HANDLING HYDRAULIC EQUIPMENT
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF PIPINGS
PRECAUTIONS FOR HANDLING ELECTRICAL EQUIPMENT
PRECAUTIONS FOR HANDLING FUEL SYSTEM EQUIPMENT
PRECAUTIONS FOR HANDLING INTAKE SYSTEM EQUIPMENT
PRACTICAL USE OF KOMTRAX
DISCONNECT AND CONNECT PUSH-PULL TYPE COUPLER
METHOD FOR DISCONNECTING AND CONNECTING TYPE 1 PUSH-PULL TYPE COUPLER
METHOD FOR DISCONNECTING AND CONNECTING TYPE 2 PUSH-PULL TYPE COUPLER
METHOD FOR DISCONNECTING AND CONNECTING TYPE 3 PUSH-PULL TYPE COUPLER
PRECAUTIONS FOR DISCONNECTION AND CONNECTION OF CONNECTORS
METHOD FOR DISCONNECTING AND CONNECTING DEUTSCH CONNECTOR
METHOD FOR DISCONNECTING AND CONNECTING SLIDE LOCK TYPE CONNECTOR
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PULL
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH LOCK TO PUSH
METHOD FOR DISCONNECTING AND CONNECTING CONNECTOR WITH HOUSING TO ROTATE
HOW TO READ ELECTRICAL WIRE CODE
EXPLANATION OF TERMS FOR MAINTENANCE STANDARD
STANDARD TIGHTENING TORQUE TABLE
CONVERSION TABLE
01 SPECIFICATIONS
CONTENTS
ABBREVIATION LIST
SPECIFICATIONS
SPECIFICATION DRAWING
SPECIFICATION DRAWING: PC45MR-5
SPECIFICATION DRAWING: PC55MR-5
WORKING RANGE DRAWINGS
WORKING RANGE: PC45MR-5
WORKING RANGE: PC55MR-5
SPECIFICATIONS
SPECIFICATIONS: PC45MR-5
SPECIFICATIONS: PC55MR-5
WEIGHT TABLE
WEIGHT TABLE: PC45MR-5
WEIGHT TABLE: PC55MR-5
TABLE OF FUEL, COOLANT, AND LUBRICANTS
10 STRUCTURE AND FUNCTION
CONTENTS
ABBREVIATION LIST
BOOT-UP SYSTEM
LAYOUT DRAWING OF BOOT-UP SYSTEM
SYSTEM OPERATING LAMP SYSTEM
SYSTEM OPERATING LAMP SYSTEM DIAGRAM
FUNCTION OF SYSTEM OPERATING LAMP SYSTEM
BATTERY DISCONNECT SWITCH
FUNCTION OF BATTERY DISCONNECT SWITCH
ENGINE SYSTEM
LAYOUT DRAWING OF ENGINE SYSTEM
ENGINE CONTROL SYSTEM
ENGINE CONTROL SYSTEM DIAGRAM
FUNCTION OF ENGINE CONTROL SYSTEM
AUTO-DECELERATION SYSTEM
AUTO-DECELERATION SYSTEM DIAGRAM
FUNCTION OF AUTO-DECELERATION SYSTEM
OPERATION OF AUTO-DECELERATION SYSTEM
OVERHEAT PREVENTION SYSTEM
OVERHEAT PREVENTION SYSTEM DIAGRAM
FUNCTION OF OVERHEAT PREVENTION SYSTEM
AUTOMATIC IDLE STOP SYSTEM
AUTOMATIC IDLE STOP SYSTEM DIAGRAM
FUNCTION OF AUTOMATIC IDLE STOP SYSTEM
COMPONENT PARTS OF ENGINE SYSTEM
PTO
COOLING SYSTEM
LAYOUT DRAWING OF COOLING SYSTEM
SPECIFICATIONS OF COOLING SYSTEM
CONTROL SYSTEM
LAYOUT DRAWING OF CONTROL SYSTEM
MACHINE MONITOR SYSTEM
MACHINE MONITOR SYSTEM DIAGRAM
KOMTRAX SYSTEM
KOMTRAX SYSTEM DIAGRAM
FUNCTION OF KOMTRAX SYSTEM
COMPONENT PARTS OF CONTROL SYSTEM
MACHINE MONITOR
KOMTRAX TERMINAL
MACHINE CONTROLLER
FUEL CONTROL DIAL
HYDRAULIC SYSTEM
LAYOUT DRAWING OF HYDRAULIC SYSTEM
CLSS
STRUCTURE OF CLSS
FUNCTION OF CLSS
ENGINE AND PUMP COMBINED CONTROL SYSTEM
ENGINE AND PUMP COMBINED CONTROL SYSTEM DIAGRAM
FUNCTION OF ENGINE AND PUMP COMBINED CONTROL SYSTEM
COMPONENT PARTS OF HYDRAULIC SYSTEM
HYDRAULIC TANK
MAIN PUMP
CONTROL VALVE
WORK EQUIPMENT SYSTEM
LAYOUT DRAWING OF WORK EQUIPMENT SYSTEM
STRUCTURE OF VALVE CONTROL
PPC LOCK SYSTEM
PPC LOCK SYSTEM DIAGRAM
FUNCTION OF PPC LOCK SYSTEM
WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM
FUNCTION OF WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM
OPERATION OF WORK EQUIPMENT AND TRAVEL AUTOMATIC LOCK SYSTEM
OIL FLOW ADJUSTER SYSTEM FOR ATTACHMENT
ATTACHMENT OIL FLOW ADJUSTER SYSTEM DIAGRAM
FUNCTION OF OIL FLOW ADJUSTER SYSTEM FOR ATTACHMENT
COMPONENT PARTS OF WORK EQUIPMENT SYSTEM
WORK EQUIPMENT AND SWING PPC VALVE
ATTACHMENT PPC VALVE
BLADE PPC VALVE
BOOM SWING PPC VALVE
BIPARTITE SOLENOID VALVE
MULTI-CONTROL VALVE
PILOT CIRCUIT ACCUMULATOR
SWING SYSTEM
LAYOUT DRAWING OF SWING SYSTEM
COMPONENT PARTS OF SWING SYSTEM
SWING MOTOR
SWING MACHINERY
SWING CIRCLE
TRAVEL SYSTEM
LAYOUT DRAWING OF TRAVEL SYSTEM
TRAVEL CONTROL SYSTEM DIAGRAM
FUNCTION OF TRAVEL CONTROL SYSTEM
COMPONENT PARTS OF TRAVEL SYSTEM
TRAVEL MOTOR
TRAVEL PPC VALVE
CENTER SWIVEL JOINT
UNDERCARRIAGE AND FRAME
LAYOUT DRAWING OF UNDERCARRIAGE
SPECIFICATIONS OF UNDERCARRIAGE
IDLER CUSHION
STRUCTURE OF IDLER CUSHION
SPECIFICATIONS OF IDLER CUSHION
WORK EQUIPMENT
STRUCTURE OF WORK EQUIPMENT
FUNCTION OF WORK EQUIPMENT
WORK EQUIPMENT CLEARANCE ADJUSTMENT SHIM
FUNCTION OF WORK EQUIPMENT CLEARANCE ADJUSTMENT SHIM
CAB AND ITS ATTACHMENTS
ROPS CAB
STRUCTURE OF ROPS CAB
FUNCTION OF ROPS CAB
TILT TYPE FLOOR
STRUCTURE OF TILT TYPE FLOOR
FUNCTION OF TILT TYPE FLOOR
20 STANDARD VALUE TABLE
CONTENTS
ABBREVIATION LIST
STANDARD VALUE TABLE FOR ENGINE
STANDARD VALUE TABLE FOR ENGINE: PC45MR-5
STANDARD VALUE TABLE FOR ENGINE: PC55MR-5
STANDARD VALUE TABLE FOR MACHINE
STANDARD VALUE TABLE FOR MACHINE: PC45MR-5
STANDARD VALUE TABLE FOR MACHINE: PC55MR-5
MACHINE POSTURE AND PROCEDURE FOR MEASURING PERFORMANCE
30 TESTING AND ADJUSTING
CONTENTS
ABBREVIATION LIST
RELATED INFORMATION ON TESTING AND ADJUSTING
TOOLS FOR TESTING AND ADJUSTING
SKETCH OF TOOLS FOR TESTING AND ADJUSTING
ENGINE AND COOLING SYSTEM
TEST ENGINE SPEED
METHOD FOR TESTING ENGINE SPEED
TEST EXHAUST GAS COLOR
METHOD FOR TESTING EXHAUST GAS COLOR BY HANDY SMOKE CHECKER
METHOD FOR TESTING EXHAUST GAS COLOR BY SMOKE METER
TEST AND ADJUST VALVE CLEARANCE
METHOD FOR TESTING VALVE CLEARANCE
METHOD FOR ADJUSTING VALVE CLEARANCE
TEST COMPRESSION PRESSURE
METHOD FOR TESTING COMPRESSION PRESSURE
TEST ENGINE OIL PRESSURE
METHOD FOR TESTING ENGINE OIL PRESSURE
BLEED AIR FROM FUEL SYSTEM
METHOD FOR BLEEDING AIR FROM FUEL SYSTEM
TEST FUEL CIRCUIT FOR LEAKAGE
METHOD FOR TESTING FUEL CIRCUIT FOR LEAKAGE
HANDLE CYLINDER CUT-OUT MODE OPERATION
TEST AND ADJUST ALTERNATOR BELT TENSION
METHOD FOR TESTING ALTERNATOR BELT TENSION
METHOD FOR ADJUSTING ALTERNATOR BELT TENSION
TEST AND ADJUST AIR CONDITIONER COMPRESSOR BELT TENSION
METHOD FOR CHECKING AND ADJUSTING AIR CONDITIONER COMPRESSOR BELT TENSION
POWER TRAIN
TEST SWING CIRCLE BEARING CLEARANCE
METHOD FOR TESTING SWING CIRCLE BEARING CLEARANCE
UNDERCARRIAGE AND FRAME
TEST AND ADJUST TRACK TENSION
METHOD FOR TESTING TRACK TENSION
METHOD FOR ADJUSTING TRACK TENSION
HYDRAULIC SYSTEM
RELEASE REMAINING PRESSURE FROM HYDRAULIC SYSTEM
METHOD FOR RELEASING REMAINING PRESSURE FROM HYDRAULIC TANK
METHOD FOR RELEASING REMAINING PRESSURE IN PPC ACCUMULATOR CIRCUIT
METHOD FOR RELEASING REMAINING PRESSURE IN HYDRAULIC CYLINDER CIRCUIT
METHOD FOR RELEASING REMAINING PRESSURE FROM SWING MOTOR CIRCUIT
METHOD FOR RELEASING REMAINING PRESSURE FROM TRAVEL MOTOR CIRCUIT
TEST AND ADJUST OIL PRESSURE IN WORK EQUIPMENT, TRAVEL, AND BOOM SWING CIRCUITS
METHOD FOR TESTING OIL PRESSURE IN WORK EQUIPMENT, TRAVEL, AND BOOM SWING CIRCUITS
METHOD FOR ADJUSTING OIL PRESSURE IN WORK EQUIPMENT, TRAVEL, AND BOOM SWING CIRCUITS
TEST AND ADJUST SWING AND BLADE CIRCUIT OIL PRESSURE
METHOD FOR TESTING SWING AND BLADE CIRCUIT OIL PRESSURE
METHOD FOR ADJUSTING SWING AND BLADE CIRCUIT OIL PRESSURE
TEST AND ADJUST OIL PRESSURE OF CONTROL CIRCUIT
METHOD FOR TESTING OIL PRESSURE OF CONTROL CIRCUIT
METHOD FOR ADJUSTING OIL PRESSURE OF CONTROL CIRCUIT
ADJUST OIL PRESSURE IN PUMP PC CONTROL CIRCUIT
METHOD FOR ADJUSTING OIL PRESSURE IN PUMP PC CONTROL CIRCUIT
TEST AND ADJUST OIL PRESSURE IN PUMP LS CONTROL CIRCUIT
METHOD FOR TESTING LS DIFFERENTIAL PRESSURE BY MACHINE MONITOR
METHOD FOR TESTING LS DIFFERENTIAL PRESSURE BY TESTING TOOL
METHOD FOR ADJUSTING LS VALVE
TEST OUTLET PRESSURE OF SOLENOID VALVE
METHOD FOR TESTING OUTLET PRESSURE OF SOLENOID VALVE BY MACHINE MONITOR
METHOD FOR TESTING OUTLET PRESSURE OF SOLENOID VALVE BY TESTING TOOL
OPERATING CONDITION OF SOLENOID VALVE
TEST PPC VALVE OUTLET PRESSURE
METHOD FOR TESTING OUTLET PRESSURE OF PPC VALVE BY MACHINE MONITOR
METHOD FOR TESTING OUTLET PRESSURE OF PPC VALVE BY TESTING TOOL
ADJUST WORK EQUIPMENT AND SWING PPC VALVES
METHOD FOR ADJUSTING PLAY OF WORK EQUIPMENT AND SWING PPC VALVES
TEST SWING PARKING BRAKE RELEASE PRESSURE
METHOD FOR TESTING SWING PARKING BRAKE RELEASE PRESSURE WITH MACHINE MONITOR
METHOD FOR TESTING SWING PARKING BRAKE RELEASE PRESSURE BY TESTING TOOL
TEST AND ADJUST TRAVEL DEVIATION
METHOD FOR TESTING TRAVEL DEVIATION
METHOD FOR ADJUSTING TRAVEL DEVIATION
TEST THE PARTS CAUSING HYDRAULIC DRIFT IN WORK EQUIPMENT
METHOD FOR TESTING THE PARTS CAUSING HYDRAULIC DRIFT OF BOOM CYLINDER AND BUCKET CYLINDER
METHOD FOR TESTING THE PARTS CAUSING HYDRAULIC DRIFT OF ARM CYLINDER
METHOD FOR TESTING THE PARTS CAUSING HYDRAULIC DRIFT OF PPC VALVE
TEST OIL LEAKAGE
METHOD FOR TESTING OIL LEAKAGE FROM BOOM CYLINDER
METHOD FOR TESTING OIL LEAKAGE FROM ARM CYLINDER
METHOD FOR TESTING OIL LEAKAGE FROM BUCKET CYLINDER
METHOD FOR TESTING OIL LEAKAGE FROM BLADE CYLINDER
BLEED AIR FROM HYDRAULIC CIRCUIT
METHOD FOR BLEEDING AIR FROM HYDRAULIC CIRCUIT
PRESSURIZE HYDRAULIC TANK
METHOD FOR PRESSURIZING HYDRAULIC TANK
CAB AND ITS ATTACHMENTS
METHOD FOR OPENING AND CLOSING FLOOR UNIT
METHOD FOR OPENING FLOOR UNIT
METHOD FOR CLOSING FLOOR UNIT
ELECTRICAL SYSTEM
SET AND OPERATE MACHINE MONITOR
OPERATOR MODE
CHECKING FUNCTION BY LCD (LIQUID CRYSTAL DISPLAY)
CHECKING FUNCTION OF SERVICE METER
METHOD FOR SETTING USAGE LIMITATION AND CHANGING PASSWORD
SERVICE MODE
METHOD FOR OPERATING SERVICE MODE
METHOD FOR CHECKING PRE-DEFINED MONITORING INFORMATION
METHOD FOR CHECKING SELF-DEFINE MONITORING INFORMATION
ABNORMALITY RECORD MENU
METHOD FOR CONFIRMING MAINTENANCE RECORD
METHOD FOR OPERATING MAINTENANCE MODE SETTING
METHOD FOR OPERATING PHONE NUMBER ENTRY SETTING
DEFAULT MENU
DIAGNOSTIC TESTS MENU
ADJUSTMENT MENU
METHOD FOR OPERATING BATTERY DISCONNECT SWITCH SETTING
KOMTRAX SETTINGS MENU
METHOD FOR DISPLAYING SERVICE MESSAGE
METHOD FOR STARTING UP KOMTRAX TERMINAL
HANDLE VOLTAGE CIRCUIT OF ENGINE CONTROLLER
TEST DIODES
METHOD FOR TESTING DIODE USING DIGITAL TESTER
METHOD FOR TESTING DIODE USING ANALOG TESTER
40 TROUBLESHOOTING
CONTENTS
ABBREVIATION LIST
RELATED INFORMATION ON TROUBLESHOOTING
GENERAL TROUBLESHOOTING POINTS
SEQUENCE OF EVENTS IN TROUBLESHOOTING
CHECKS BEFORE TROUBLESHOOTING
INSPECTION PROCEDURE BEFORE TROUBLESHOOTING
WALK-AROUND CHECK
TESTING IN ACCORDANCE WITH TESTING PROCEDURE
CHECK FUEL LEVEL AND TYPE
CHECK FUEL PREFILTER
WATER SEPARATOR – CHECK / DRAIN WATER AND SEDIMENT
CHECK MAIN FILTER
CHECK ENGINE OIL LEVEL (OIL AMOUNT IN OIL PAN)
CHECK COOLANT LEVEL (RESERVOIR TANK)
CHECK CLOGGING OF AIR CLEANER
CLEAN OUTER ELEMENT (SINGLE ELEMENT)
CLEAN OUTER ELEMENT (DOUBLE ELEMENT)
REPLACE SINGLE ELEMENT
REPLACE DOUBLE ELEMENT
CHECK HYDRAULIC OIL LEVEL
CHECK HYDRAULIC OIL STRAINER
CHECK HYDRAULIC FILTER
CHECK OIL LEVEL IN FINAL DRIVE CASE
BLEED AIR FROM FUEL SYSTEM
BLEED AIR FROM HYDRAULIC SYSTEM
ELECTRICAL EQUIPMENT – CHECK METHOD
ELECTRICAL SYSTEM TROUBLESHOOTING – PREPARATION
PROCEDURE FOR TESTING AND TROUBLESHOOTING
SYMPTOMS OF FAILURE AND TROUBLESHOOTING NUMBERS
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE
CONNECTORS LIST AND LAYOUT
CONNECTOR CONTACT IDENTIFICATION (FOR 4D88E-7 ENGINE)
T-BRANCH BOX AND T-BRANCH ADAPTER TABLE
FUSE LOCATION TABLE
FAILURE CODES TABLE
TROUBLESHOOTING BY FAILURE CODE (DISPLAY OF CODE)
FAILURE CODE [989L00]
FAILURE CODE [989M00]
FAILURE CODE [989N00]
FAILURE CODE [AQ20R1]
FAILURE CODE [B@BCNS]
FAILURE CODE [D19JKZ]
FAILURE CODE [D811MC]
FAILURE CODE [D862KA]
FAILURE CODE [D8ALKA]
FAILURE CODE [D8ALKB]
FAILURE CODE [D8AQKR]
FAILURE CODE [DAF0KT]
FAILURE CODE [DAF0MB]
FAILURE CODE [DAF0MC]
FAILURE CODE [DAF3KK]
FAILURE CODE [DAF9KQ]
FAILURE CODE [DAFGMC]
FAILURE CODE [DAFLKA]
FAILURE CODE [DAFLKB]
FAILURE CODE [DAFQKR]
FAILURE CODE [DB2QKR]
FAILURE CODE [DBH0MC]
FAILURE CODE [DBH2KK]
FAILURE CODE [DBH5KP]
FAILURE CODE [DBH5KP]
FAILURE CODE [DBH9KQ]
FAILURE CODE [DBHLKA]
FAILURE CODE [DBHLKB]
FAILURE CODE [DBHQKR]
FAILURE CODE [DDNRKA]
FAILURE CODE [DDNRKY]
FAILURE CODE [DDNS00]
FAILURE CODE [DDWLKA]
FAILURE CODE [DDWLKB]
FAILURE CODE [DFB1KZ]
FAILURE CODE [DFB3L8]
FAILURE CODE [DFB5KZ]
FAILURE CODE [DHS1MA]
FAILURE CODE [DHS5MA]
FAILURE CODE [DKULKA]
FAILURE CODE [DKULKB]
FAILURE CODE [DKULKY]
FAILURE CODE [DV00KB]
FAILURE CODE [DV20KB]
FAILURE CODE [DW43KA]
FAILURE CODE [DW43KB]
FAILURE CODE [DW43KY]
FAILURE CODE [DW4CKY]
FAILURE CODE [DXA8KA]
FAILURE CODE [DXA8KB]
FAILURE CODE [DXE7KA]
FAILURE CODE [DXE7KB]
FAILURE CODE [DXE7KY]
FAILURE CODE [DXEAKA]
FAILURE CODE [DXEAKB]
FAILURE CODE [DXEAKY]
TROUBLESHOOTING OF ELECTRICAL SYSTEM (E-MODE)
E-1 ENGINE DOES NOT START (ENGINE DOES NOT CRANK)
E-2 ENGINE DOES NOT START (FUEL FEED PUMP SYSTEM)
E-3 AUTOMATIC PREHEATING SYSTEM DOES NOT WORK
E-4 WHEN STARTING SWITCH IS TURNED TO ON POSITION, MACHINE MONITOR DISPLAYS NOTHING
E-5 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN WHITE WHILE ENGINE IS RUNNING
E-6 CHARGE LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
E-7 FUEL LEVEL MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
E-8 ENGINE COOLANT TEMPERATURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
E-9 ENGINE OIL PRESSURE MONITOR LIGHTS UP IN RED WHILE ENGINE IS RUNNING
E-10 FUEL GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR MAXIMUM
E-11 DISPLAY OF FUEL GAUGE DIFFERS FROM ACTUAL FUEL LEVEL
E-12 ENGINE COOLANT TEMPERATURE GAUGE DISPLAY DOES NOT MOVE FROM MINIMUM OR MAXIMUM
E-13 DISPLAY OF ENGINE COOLANT TEMPERATURE GAUGE DIFFERS FROM ACTUAL COOLANT TEMPERATURE
E-14 SOME AREAS OF MACHINE MONITOR SCREEN ARE NOT DISPLAYED
E-15 FUNCTION SWITCH DOES NOT OPERATE
E-16 AUTO-DECELERATOR IS NOT OPERATED OR CANCELED WITH LEVER
E-17 WHEN WORKING MODE IS CHANGED, SETTING OF ENGINE AND HYDRAULIC PUMP IS NOT CHANGED
E-18 WHEN TRAVEL SPEED SELECTION IS CHANGED, ACTUAL TRAVEL SPEED DOES NOT CHANGE
E-19 ALARM BUZZER DOES NOT SOUND
E-20 ALARM BUZZER CANNOT BE CANCELED
E-21 SERVICE METER IS NOT DISPLAYED, WHILE STARTING SWITCH IS IN OFF POSITION
E-22 SERVICE MODE CANNOT BE SELECTED
E-23 ALL OF WORK EQUIPMENTS, SWING, AND TRAVEL MECHANISM DO NOT MOVE
E-24 ALL OF WORK EQUIPMENT, SWING, AND TRAVEL MECHANISM DO NOT LOCK
E-25 ALARM DOES NOT SOUND DURING TRAVEL
E-26 ALARM DOES NOT STOP SOUNDING WHILE MACHINE IS STOPPED
E-27 HORN DOES NOT SOUND
E-28 HORN DOES NOT SOUND (FOR PROPORTIONAL LEVER SPEC)
E-29 HORN DOES NOT STOP SOUNDING
E-30 HORN DOES NOT STOP SOUNDING (FOR PROPORTIONAL LEVER SPEC)
E-31 WORKING LAMP OR TRAVEL LAMP DOES NOT LIGHT UP (CANOPY SPEC)
E-32 NONE OF WORKING LAMP, TRAVEL LAMP, OR ADDITIONAL LAMP DOES NOT LIGHT UP (CAB SPEC)
E-33 WHEN WIPER SWITCH IS OPERATED, WINDSHIELD WIPER DOES NOT OPERATE
E-34 WHEN WINDOW WASHER SWITCH IS OPERATED, WINDOW WASHER DOES NOT OPERATE
E-35 TRAVEL INDICATOR IS NOT DISPLAYED PROPERLY WITH MONITORING FUNCTION
E-36 Swing or Arm IN IS NOT DISPLAYED NORMALLY IN MONITORING FUNCTION
E-37 Work Equipment IS NOT DISPLAYED NORMALLY IN MONITORING FUNCTION
E-38 KOMTRAX SYSTEM DOES NOT OPERATE NORMALLY
TROUBLESHOOTING FOR HYDRAULIC AND MECHANICAL SYSTEMS (H MODE)
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (H MODE)
H-1 ALL WORK EQUIPMENT, TRAVEL, SWING OR BLADE DO NOT OPERATE
H-2 ALL WORK EQUIPMENTS OR TRAVEL DOES NOT OPERATE
H-3 TRAVEL OR BLADE DOES NOT OPERATE
H-4 SWING OR BLADE DOES NOT OPERATE
H-5 ALL WORK EQUIPMENT, TRAVEL, SWING AND BLADE SPEED OR POWER IS LOW
H-6 ALL WORK EQUIPMENT AND TRAVEL SPEED OR POWER IS LOW
H-7 TRAVEL AND BLADE SPEED OR POWER IS LOW
H-8 SWING AND BLADE SPEED OR POWER IS LOW
H-9 FINE CONTROL PERFORMANCE OR RESPONSE IS POOR
H-10 UNUSUAL NOISE IS HEARD FROM AROUND HYDRAULIC PUMP
H-11 ENGINE SPEED DROPS LARGELY OR ENGINE STOPS
H-12 ALL WORK EQUIPMENTS SPEED OR POWER IS LOW
H-13 ALL WORK EQUIPMENTS AND BLADE SPEED OR POWER IS LOW
H-14 BLADE DOES NOT OPERATE
H-15 ALL WORK EQUIPMENTS DO NOT OPERATE
H-16 ALL WORK EQUIPMENTS OR BLADE DO NOT OPERATE
H-17 SPEED OR POWER OF BOOM IS LOW
H-18 ARM SPEED OR POWER IS LOW
H-19 BUCKET SPEED OR POWER IS LOW
H-20 BLADE SPEED OR POWER IS LOW
H-21 BOOM SWING SPEED OR POWER IS LOW
H-22 WORK EQUIPMENT DOES NOT MOVE IN SINGLE OPERATION
H-23 HYDRAULIC DRIFT OF BOOM IS LARGE
H-24 HYDRAULIC DRIFT OF ARM IS LARGE
H-25 HYDRAULIC DRIFT OF BUCKET IS LARGE
H-26 HYDRAULIC DRIFT OF BLADE IS LARGE
H-27 TIME LAG OF WORK EQUIPMENT IS LARGE
H-28 IN COMBINED OPERATION OF WORK EQUIPMENT, EQUIPMENT HAVING HEAVIER LOAD MOVES SLOWER
H-29 MACHINE DOES NOT TRAVEL STRAIGHT
H-30 MACHINE DOES NOT MOVE OFF STRAIGHT
H-31 MACHINE IS NOT STEERED WELL OR STEERING POWER IS LOW
H-32 TRAVEL SPEED IS LOW
H-33 BOTH SIDES OF CRAWLERS DO NOT MOVE
H-34 ONE OF TRACKS DOES NOT RUN
H-35 TRAVEL SPEED DOES NOT CHANGE, OR TRAVEL SPEED IS TOO SLOW OR FAST
H-36 UPPER STRUCTURE DOES NOT SWING BOTH TO THE RIGHT AND LEFT
H-37 SWINGS ONLY IN ONE DIRECTION
H-38 SWING ACCELERATION OR SWING SPEED IS LOW IN BOTH DIRECTIONS (RIGHT AND LEFT)
H-39 SWING ACCELERATION PERFORMANCE IS POOR OR SWING SPEED IS SLOW IN ONLY ONE DIRECTION
H-40 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWINGING (BOTH RIGHT AND LEFT)
H-41 UPPER STRUCTURE OVERRUNS EXCESSIVELY WHEN IT STOPS SWINGING (ONLY ONE DIRECTION EITHER RIGHT OR LEFT)
H-42 SHOCK IS LARGE WHEN UPPER STRUCTURE STOPS SWINGING
H-43 LARGE UNUSUAL NOISE IS HEARD WHEN UPPER STRUCTURE STOPS SWINGING
H-44 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS APPLIED)
H-45 SWING DRIFT ON A SLOPE IS LARGE (WHILE SWING PARKING BRAKE IS RELEASED)
TROUBLESHOOTING OF ENGINE (S-MODE)
INFORMATION MENTIONED IN TROUBLESHOOTING TABLE (S MODE)
S-1 ENGINE DOES NOT CRANK WHEN STARTING SWITCH IS TURNED TO START POSITION
S-2 ENGINE CRANKS BUT NO EXHAUST GAS COMES OUT
S-3 FUEL IS BEING INJECTED BUT ENGINE DOES NOT START (MISFIRING: ENGINE CRANKS BUT DOES NOT START)
S-4 ENGINE STARTABILITY IS POOR
S-5 ENGINE DOES NOT PICK UP SMOOTHLY
S-6 ENGINE STOPS DURING OPERATION
S-7 ENGINE RUNS ROUGH OR IS UNSTABLE
S-8 ENGINE LACKS POWER
S-9 KDPF GETS CLOGGED IN A SHORT TIME
S-10 ENGINE OIL CONSUMPTION IS EXCESSIVE
S-11 OIL BECOMES CONTAMINATED QUICKLY
S-12 FUEL CONSUMPTION IS EXCESSIVE
S-13 OIL IS IN COOLANT (OR COOLANT SPURTS BACK OR COOLANT LEVEL GOES DOWN)
S-14 OIL PRESSURE DROPS
S-15 FUEL MIXES INTO ENGINE OIL
S-16 WATER MIXES INTO ENGINE OIL (MILKY)
S-17 COOLANT TEMPERATURE RISES TOO HIGH (OVERHEATING)
S-18 UNUSUAL NOISE IS HEARD
S-19 VIBRATION IS EXCESSIVE
S-20 AIR CANNOT BE BLED FROM FUEL CIRCUIT
50 DISASSEMBLY AND ASSEMBLY
CONTENTS
ABBREVIATION LIST
RELATED INFORMATION ON DISASSEMBLY AND ASSEMBLY
HOW TO READ THIS MANUAL
COATING MATERIALS LIST
SPECIAL TOOLS LIST
SKETCHES OF SPECIAL TOOLS
ENGINE AND COOLING SYSTEM
REMOVE AND INSTALL SUPPLY PUMP ASSEMBLY
METHOD FOR REMOVING SUPPLY PUMP ASSEMBLY
METHOD FOR INSTALLING SUPPLY PUMP ASSEMBLY
REMOVE AND INSTALL STARTER ASSEMBLY
METHOD FOR REMOVING STARTER ASSEMBLY
METHOD FOR INSTALLING STARTER ASSEMBLY
REMOVE AND INSTALL RADIATOR ASSEMBLY
METHOD FOR REMOVING RADIATOR ASSEMBLY
METHOD FOR INSTALLING RADIATOR ASSEMBLY
REMOVE AND INSTALL HYDRAULIC OIL COOLER ASSEMBLY
METHOD FOR REMOVING HYDRAULIC OIL COOLER ASSEMBLY
METHOD FOR INSTALLING HYDRAULIC OIL COOLER ASSEMBLY
REMOVE AND INSTALL ENGINE AND MAIN PUMP ASSEMBLY
METHOD FOR REMOVING ENGINE AND MAIN PUMP ASSEMBLY
METHOD FOR INSTALLING ENGINE AND MAIN PUMP ASSEMBLY
REMOVE AND INSTALL FUEL TANK ASSEMBLY
METHOD FOR REMOVING FUEL TANK ASSEMBLY
METHOD FOR INSTALLING FUEL TANK ASSEMBLY
DISASSEMBLE AND ASSEMBLE OF KDPF ASSEMBLY
POWER TRAIN
REMOVE AND INSTALL TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY
METHOD FOR REMOVING TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY
METHOD FOR INSTALLING TRAVEL MOTOR AND FINAL DRIVE ASSEMBLY
REMOVE AND INSTALL SWING MOTOR AND SWING MACHINERY ASSEMBLY
METHOD FOR REMOVING SWING MOTOR AND SWING MACHINERY ASSEMBLY
METHOD FOR INSTALLING SWING MOTOR AND SWING MACHINERY ASSEMBLY
DISASSEMBLE AND ASSEMBLE SWING MACHINERY ASSEMBLY
METHOD FOR DISASSEMBLING SWING MACHINERY ASSEMBLY
METHOD FOR ASSEMBLING SWING MACHINERY ASSEMBLY
REMOVE AND INSTALL SWING CIRCLE ASSEMBLY
METHOD FOR REMOVING SWING CIRCLE ASSEMBLY
METHOD FOR INSTALLING SWING CIRCLE ASSEMBLY
UNDERCARRIAGE AND FRAME
DISASSEMBLE AND ASSEMBLE RECOIL SPRING
METHOD FOR DISASSEMBLING AND ASSEMBLING RECOIL SPRING
METHOD FOR ASSEMNLING RECOIL SPRING ASSEMBLY
SEPARATION AND CONNECTION OF TRACK ASSEMBLY
METHOD FOR SEPARATING TRACK ASSEMBLY
METHOD FOR INSTALLING TRACK ASSEMBLY
DISASSEMBLE AND ASSEMBLE IDLER ASSEMBLY
METHOD FOR DISASSEMBLING IDLER ASSEMBLY
METHOD FOR ASSEMBLING IDLER ASSEMBLY
DISASSEMBLE AND ASSEMBLE TRACK ROLLER ASSEMBLY
METHOD FOR DISASSEMBLING TRACK ROLLER ASSEMBLY
METHOD FOR ASSEMBLING TRACK ROLLER ASSEMBLY
DISASSEMBLEAND ASSEMBLE CARRIER ROLLER ASSEMBLY
METHOD FOR DISASSEMBLING CARRIER ROLLER ASSEMBLY
METHOD FOR ASSEMBLING CARRIER ROLLER ASSEMBLY
REMOVE AND INSTALL REVOLVING FRAME ASSEMBLY
METHOD FOR REMOVING REVOLVING FRAME ASSEMBLY
METHOD FOR INSTALLING REVOLVING FRAME ASSEMBLY
REMOVE AND INSTALL COUNTERWEIGHT ASSEMBLY
METHOD FOR REMOVING COUNTERWEIGHT ASSEMBLY
METHOD FOR INSTALLING COUNTERWEIGHT ASSEMBLY
HYDRAULIC SYSTEM
REMOVE AND INSTALL CENTER SWIVEL JOINT ASSEMBLY
METHOD FOR REMOVING CENTER SWIVEL JOINT ASSEMBLY
METHOD FOR INSTALLING CENTER SWIVEL JOINT ASSEMBLY
DISASSEMBLE AND ASSEMBLE CENTER SWIVEL JOINT ASSEMBLY
METHOD FOR DISASSEMBLING CENTER SWIVEL JOINT ASSEMBLY
METHOD FOR ASSEMBLING CENTER SWIVEL JOINT ASSEMBLY
REMOVE AND INSTALL HYDRAULIC TANK ASSEMBLY
METHOD FOR REMOVING HYDRAULIC TANK ASSEMBLY
METHOD FOR INSTALLING HYDRAULIC TANK ASSEMBLY
REMOVE AND INSTALL MAIN PUMP ASSEMBLY
METHOD FOR REMOVING MAIN PUMP ASSEMBLY
METHOD FOR INSTALLING MAIN PUMP ASSEMBLY
REMOVE AND INSTALL ACCUMULATOR ASSEMBLY
METHOD FOR REMOVING ACCUMULATOR ASSEMBLY (EU SPECIFICATION)
METHOD FOR REMOVING ACCUMULATOR ASSEMBLY (NORTH AMERICA SPECIFICATION, FOR MACHINE WITH QUICK COUPLER)
METHOD FOR INSTALLING ACCUMULATOR ASSEMBLY (EU SPECIFICATION)
METHOD FOR INSTALLING ACCUMULATOR ASSEMBLY (NORTH AMERICA SPECIFICATION, FOR MACHINE WITH QUICK COUPLER)
DISASSEMBLE AND ASSEMBLE WORK EQUIPMENT PPC VALVE ASSEMBLY
METHOD FOR DISASSEMBLING WORK EQUIPMENT PPC VALVE ASSEMBLY
METHOD FOR ASSEMBLING WORK EQUIPMENT PPC VALVE ASSEMBLY
DISASSEMBLE AND ASSEMBLE TRAVEL PPC VALVE ASSEMBLY
METHOD FOR DISASSEMBLING TRAVEL PPC VALVE ASSEMBLY
METHOD FOR ASSEMBLING TRAVEL PPC VALVE ASSEMBLY
WORK EQUIPMENT
REMOVE AND INSTALL WORK EQUIPMENT ASSEMBLY
METHOD FOR REMOVING WORK EQUIPMENT ASSEMBLY
METHOD FOR INSTALLING WORK EQUIPMENT ASSEMBLY
DISASSEMBLE AND ASSEMBLE WORK EQUIPMENT CYLINDER ASSEMBLY
METHOD FOR DISASSEMBLING WORK EQUIPMENT CYLINDER ASSEMBLY
METHOD FOR ASSEMBLING WORK EQUIPMENT CYLINDER ASSEMBLY
CAB AND ITS ATTACHMENTS
REMOVE AND INSTALL OPERATOR’S CAB ASSEMBLY (CAB SPEC)
METHOD FOR REMOVING OPERATOR’S CAB ASSEMBLY (CAB SPEC)
METHOD FOR INSTALLING OPERATOR’S CAB ASSEMBLY (CAB SPEC)
REMOVE AND INSTALL FLOOR FRAME ASSEMBLY (CANOPY SPEC)
METHOD FOR REMOVING FLOOR FRAME ASSEMBLY (CANOPY SPEC)
METHOD FOR INSTALLING FLOOR FRAME ASSEMBLY (CANOPY SPEC)
REMOVE AND INSTALL OPERATOR CAB GLASS (ADHERED GLASS)
METHOD FOR REMOVING OPERATOR CAB GLASS (ADHERED GLASS)
METHOD FOR INSTALLING OPERATOR CAB GLASS (ADHERED GLASS)
REMOVE AND INSTALL FRONT WINDOW ASSEMBLY
METHOD FOR REMOVING FRONT WINDOW ASSEMBLY
METHOD FOR INSTALLING FRONT WINDOW ASSEMBLY
REMOVE AND INSTALL AIR CONDITIONER UNIT ASSEMBLY
METHOD FOR REMOVING AIR CONDITIONER UNIT ASSEMBLY
METHOD FOR INSTALLING AIR CONDITIONER UNIT ASSEMBLY
REMOVE AND INSTALL OPERATOR’S SEAT
METHOD FOR REMOVING OPERATOR’S SEAT
METHOD FOR INSTALLING OPERATOR’S SEAT
REMOVE AND INSTALL SEAT BELT
METHOD FOR REMOVING SEAT BELT
METHOD FOR INSTALLING SEAT BELT
ELECTRICAL SYSTEM
REMOVE AND INSTALL ENGINE CONTROLLER ASSEMBLY
METHOD FOR REMOVING ENGINE CONTROLLER ASSEMBLY
METHOD FOR INSTALLING ENGINE CONTROLLER ASSEMBLY
REMOVE AND INSTALL MACHINE CONTROLLER ASSEMBLY
METHOD FOR REMOVING MACHINE CONTROLLER ASSEMBLY
METHOD FOR INSTALLING MACHINE CONTROLLER ASSEMBLY
REMOVE AND INSTALL MACHINE MONITOR ASSEMBLY
METHOD FOR REMOVING MACHINE MONITOR ASSEMBLY
METHOD FOR INSTALLING MACHINE MONITOR ASSEMBLY
REMOVE AND INSTALL KOMTRAX TERMINAL ASSEMBLY
METHOD FOR REMOVING KOMTRAX TERMINAL ASSEMBLY
METHOD FOR INSTALLING KOMTRAX TERMINAL ASSEMBLY
60 MAINTENANCE STANDARD
CONTENTS
ABBREVIATION LIST
ENGINE AND COOLING SYSTEM
MAINTENANCE STANDARD FOR PTO
MAINTENANCE STANDARD OF COOLING SYSTEM
POWER TRAIN
MAINTENANCE STANDARD OF SWING CIRCLE
MAINTENANCE STANDARD OF SWING MACHINERY
MAINTENANCE STANDARD OF SPROCKET
UNDERCARRIAGE AND FRAME
MAINTENANCE STANDARD OF TRACK FRAME AND IDLER CUSHION
MAINTENANCE STANDARD OF IDLER
MAINTENANCE STANDARD OF TRACK ROLLER
MAINTENANCE STANDARD OF CARRIER ROLLER
MAINTENANCE STANDARD OF TRACK SHOE
MAINTENANCE STANDARD OF TRIPLE SHOE
MAINTENANCE STANDARD OF ROAD LINER
MAINTENANCE STANDARD FOR RUBBER SHOE
HYDRAULIC SYSTEM
MAINTENANCE STANDARD OF HYDRAULIC TANK
MAINTENANCE STANDARD OF MAIN PUMP
MAINTENANCE STANDARD OF MAIN PUMP SERVO VALVE
MAINTENANCE STANDARD OF PC-EPC VALVE
MAINTENANCE STANDARD OF SWING MOTOR
MAINTENANCE STANDARD OF TRAVEL MOTOR
MAINTENANCE STANDARD OF CONTROL VALVE
MAINTENANCE STANDARD OF WORK EQUIPMENT AND SWING PPC VALVE
MAINTENANCE STANDARD OF BLADE PPC VALVE
MAINTENANCE STANDARD OF BOOM SWING PPC VALVE
MAINTENANCE STANDARD OF TRAVEL PPC VALVE
MAINTENANCE STANDARD OF ATTACHMENT PPC VALVE
MAINTENANCE STANDARD OF CENTER SWIVEL JOINT
WORK EQUIPMENT
MAINTENANCE STANDARD OF WORK EQUIPMENT LINKAGE
DIMENSION OF ARM
DIMENSIONS OF BUCKET
MAINTENANCE STANDARD OF BOOM CYLINDER
MAINTENANCE STANDARD OF ARM CYLINDER
MAINTENANCE STANDARD OF BUCKET CYLINDER
MAINTENANCE STANDARD OF BLADE CYLINDER
MAINTENANCE STANDARD OF BOOM SWING CYLINDER
80 APPENDIX
CONTENTS
ABBREVIATION LIST
AIR CONDITIONER SYSTEM
PRECAUTIONS FOR REFRIGERANT
AIR CONDITIONER COMPONENT
SPECIFICATIONS OF AIR CONDITIONER
CONFIGURATION AND FUNCTION OF REFRIGERATION CYCLE
OUTLINE OF REFRIGERATION CYCLE
COMPONENT PARTS OF AIR CONDITIONER SYSTEM
AIR CONDITIONER UNIT
CONFIGURATION DIAGRAM OF AIR CONDITIONER UNIT
COMPRESSOR
STRUCTURE OF COMPRESSOR
SPECIFICATIONS OF COMPRESSOR
FUNCTION OF COMPRESSOR
CONDENSER
STRUCTURE OF CONDENSER
SPECIFICATIONS OF CONDENSER
FUNCTION OF CONDENSER
RECEIVER DRIER
STRUCTURE OF RECEIVER DRIER
SPECIFICATIONS OF RECEIVER DRIER
FUNCTION OF RECEIVER DRIER
INFORMATION DESCRIBED IN TROUBLESHOOTING TABLE
A-1 TROUBLESHOOTING FOR POWER SUPPLY SYSTEM (AIR CONDITIONER DOES NOT OPERATE)
A-2 TROUBLESHOOTING FOR BLOWER MOTOR SYSTEM (NO AIR COMES OUT OR AIR FLOW IS ABNORMAL)
A-3 TROUBLESHOOTING FOR TEMPERATURE CONTROL FUNCTION
A-4 TROUBLESHOOTING FOR AIR CONDITINOER COMPRESSOR AND COOLING SYSTEM (ELECTRICAL SYSTEM)
A-5 TROUBLESHOOTING FOR AIR CONDITINOER COMPRESSOR AND COOLING SYSTEM (MECHANICAL SYSTEMS)
A-6 TROUBLESHOOTING FOR HOT WATER CIRCUIT SYSTEM
A-7 UNUSUAL NOISE IS HEARD FROM AIR CONDITINOER RELATED PARTS
A-8 WATER LEAKS FROM AIR CONDITINOER RELATED PARTS
A-9 TROUBLESHOOTING FOR FRESH/RECIRC AIR CHANGEOVER
PRECAUTIONS FOR DISCONNECTING AND CONNECTING HOSES AND TUBES IN AIR CONDITIONER PIPINGS
HANDLE COMPRESSOR OIL
90 CIRCUIT DIAGRAMS
CONTENTS
ABBREVIATION LIST
HYDRAULIC CIRCUIT DIAGRAM
SYMBOLS USED IN HYDRAULIC CIRCUIT DIAGRAM
HYDRAULIC CIRCUIT DIAGRAM
HYDRAULIC CIRCUIT DIAGRAM (QUICK COUPLER SPECIFICATIONS) (1/2)
HYDRAULIC CIRCUIT DIAGRAM (QUICK COUPLER SPECIFICATIONS) (2/2)
ELECTRICAL CIRCUIT DIAGRAM
SYMBOLS USED IN ELECTRICAL CIRCUIT DIAGRAM
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPEC) (1/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPEC) (2/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPEC) (3/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPEC) (4/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPEC) (5/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (1/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (2/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (3/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (4/5)
ELECTRICAL CIRCUIT DIAGRAM (CANOPY SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (5/5)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPEC) (1/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPEC) (2/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPEC) (3/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPEC) (4/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPEC) (5/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPEC) (6/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (1/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (2/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (3/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (4/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (5/6)
ELECTRICAL CIRCUIT DIAGRAM (CAB SPECIFICATIONS, QUICK COUPLER SPECIFICATIONS) (6/6)
INDEX