Service manual Mercedes-Benz OM654 Engine | Up to 2020 incl.

Set basic position of camshafts Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install electric vacuum pump Engine 654.9 in model 213.011/016/211/216 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install transmission with torque converter Transmission 725.0 in model 257 with engine 654 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Engine oil and oil filter change Engine 654 in model 167
Remove/install injection lines of common rail direct injection Engine 654 in model 213, 238, 257
Replace rear radial shaft sealing ring Engine 654 in model 213, 238, 257
Remove/install crankshaft position sensor Engine 654 in model 213, 238, 257
Remove/install engine with front axle carrier Engine 654 in model 205, 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Detension tension refrigerant compressor V-belt Engine 654.9 in model 907.6
Remove/install NOx sensor with control unit downstream of SCR catalytic converter Engine 654 in model 205, 253
Remove/install rear engine support Engine 654 in model 257 Engine 656 in model 213, 238, 257
Remove/install cylinder head Engine 654 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove cylinder head cover Engine 654 in model 205
Overview of service intervals for diesel engines depending on engine oil specification Engine 607, 611, 612, 626, 628, 629, 640, 642, 646, 647, 648, 651, 654, 660 Engine 612, 628, 642 in model 463
Remove/install front engine mount Engine 642, 654 in model 213 Engine 642, 654 in model 238 Engine 654 in model 257
Replace pilot bushing Model 257 with engine 654, 656
Correcting anticorrosion/antifreeze concentration Engine 642.8 in model 907 Engine 651.9 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install oil level check switch Engine 654 in model 213, 238, 257
Remove/install central clutch operator TRANSMISSION 716.6 (except 716.631 /638 /654 /664 /669) except CODE (424) Sequentronic automated manual transmission (SEQ)
Remove/install exhaust system Engine 654 in model 205, 253
Engine oil and oil filter change Engine 654 in model 118, 177, 247 Engine 654 in model 205, 213, 238, 253, 257 with code M014 (Engine uprated)
Assemble/disassemble engine on engine assembly stand Engine 654 in model 118, 177, 247
Remove/install tensioning device for poly-V belt of refrigerant compressor Engine 654.9 in model 907.6 with code HK4 (Rear air conditioning, reinforced)
Remove/install engine with front axle carrier Engine 654 in model 213, 238 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install balance shafts with crankshaft bearing caps Engine 654 in model 205, 253
Remove/install bracket for turbocharger Engine 654 in model 167, 205, 213, 238, 253, 257 with code M014 (Engine uprated)
Remove/install timing case cover Engine 654 in model 205, 253
Approved wheel/tire combinations overview Model 118 (except 118.351/353/354/651/653/654) with code 830 (China version) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except …
Remove/install engine cover Engine 654 in model 205, 253
Remove/install poly-V belt Engine 654 in model 205, 253
Check main circuit coolant level Engine 256, 264, 274, 276.8, 642, 654, 656 in model 238
Remove install coolant return line for turbocharger Engine 654 in model 213, 238, 257 with code M014 (Engine uprated)
Remove/install crankshaft Engine 654 in model 205, 253
Remove install coolant feed line for turbocharger Engine 654 in model 213, 238 except code M014 (Engine uprated)
Remove/install oil lines of oil cooling for automatic transmission Transmission 725.0 in model 205, 253 with engine 264 Transmission 725.0 in model 205, 253 with engine 654 Transmission 725.0 in model 253 with engine 656
Remove/install poly-V belt Engine 654 in model 213, 238, 257
Routing diagram for poly-V belt Engine 654
Notes on sealant path for timing case cover Engine 651 in model 447, 636, 639 Engine 651 in model 900, 906, 907 Engine 651, 654, 656
Remove/install connection fitting on AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install left and right engine mount Engine 654.9 in model 907.1/2/6
Remove/install glow output stage Engine 654 in model 205 Engine 654, 656 in model 253
Remove/install Hall sensor of camshaft Engine 654 in model 205 Engine 654, 656 in model 253
Remove/install electric refrigerant compressor Engine 654 in model 213.016/216 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install exhaust manifold Engine 654.9 in model 213, 238, 257
Replace timing chain Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install a flywheel Engine 654.9 in model 907.1/2/6
Check basic position of camshafts Engine 654 in model 213, 238, 257
Remove/install common rail diesel injection system (CDI) coolant temperature sensor Engine 654.9 in model 907.1/2/6
Remove/install underbody paneling Model 205 Model 253 with engine 177, 264, 274, 276, 642, 651, 654, 656
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 205, 253 with engine 264 Transmission 725.0 in model 205, 253 with engine 654 Transmission 725.0 in model 253 with engine 656
Prepare engine support fixture for removal of engine/transmission unit Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Bolt tightening procedure for cylinder head cover Engine 654
Check engine cooling system cap Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 213, 238, 257 with engine 656 Transmission 725.0 in model 257 with engine 654
Remove install coolant return line for turbocharger Engine 654 in model 205, 253 except code M014 (Engine uprated)
Remove install coolant feed line for turbocharger Engine 654 in model 205, 253 with code M014 (Engine uprated)
Approved wheel/tire combinations tire recommendation overview Model 118 (except 118.351/353/354/651/653/654) with code 830 (China version) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except …
Disconnect/connect engine wiring harness to remove engine Engine 654 in model 205, 253
Remove/install bottom part of oil pan Engine 654 in model 213, 238, 257
Service Information: Coolant Engine 112, 272, 642, 646, 651, 780 in model 639 Engine 271, 272, 642, 646, 651 in model 906 Engine 272, 646, 651 in model 636 Engine 274, 622, 651, 654 in model 447 Engine 651 in …
Remove/install exhaust flap controller Engine 654 in model 257 Engine 656 in model 213, 238, 257
Remove/install left underbody paneling Model 447 with engine 651 with code MX0 (BlueEFFICIENCY package) Model 447 with engine 654.9
Remove/install coolant pump Engine 654 in model 213, 238, 257
Remove/install catalytic converter temperature sensor Engine 654 in model 205, 253 Engine 656 in model 253
Drain/fill coolant of auxiliary circuit Engine 654 in model 205.013/213, 253.311/911
Remove/install poly-V-belt guide pulley Engine 654 in model 205, 253
Remove/install poly-V-belt guide pulley Engine 654.9 in model 213 (except 213.011/016/211/216) Engine 654.9 in model 238, 257
Remove/install chain tensioner Engine 654 in model 213, 238, 257
Remove/install high-pressure exhaust gas recirculation cooler Engine 654 in model 205, 253
Engine cooling system – inspecting fluid level adjusting to correct level Engine 642.8 in model 907 Engine 651.9 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install oil pan Engine 654 in model 118, 177, 247
Remove/install engine from/onto front axle carrier Engine 654 in model 213, 238 with code M005 (4MATIC)
Remove install coolant return line for turbocharger Engine 654 in model 205, 253 with code M014 (Engine uprated) Engine 656 in model 253
Check engine oil level with instrument cluster Engine 654 in model 447
Measure cylinder bores Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install diesel particulate filter temperature sensor Engine 654 in model 213, 238, 257
Assign connecting rod bearing shells Engine 654, 656
Remove/install bracket for turbocharger Engine 654 in model 167, 205, 213, 238, 253, 257 except code M014 (Engine uprated)
Remove/install exhaust aftertreatment unit Engine 654 in model 213.### 2# , 238.### 2# , 257.### 2#
Remove/install temperature sensor upstream of turbocharger Engine 654 in model 205, 253 except code M014 (Engine uprated)
Assign crankshaft bearing shells Engine 651, 654, 656
Remove install coolant feed line for turbocharger Engine 654 in model 205, 253 except code M014 (Engine uprated)
Notes on applying sealant to bottom part of crankcase Engine 254.9 Engine 654
Remove/install camshaft housing with camshafts Engine 654 in model 213, 238, 257
Remove/install differential pressure sensor Engine 654.9 in model 213, 238, 257
Remove/install front engine mount Engine 654 in model 205, 253 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install coolant expansion reservoir Model 213 with engine 264, 274, 642, 654 Model 238 with engine 264, 274.9, 642, 654 Model 257 with engine 264
Tightening procedure for cylinder head bolts Engine 654
Remove/install cylinder head cover Engine 654 in model 213, 238, 257
Remove/install fan unit Engine 654, 656 in model 253
Attach engine supporting frame and lifting engine Model 907 with engine 274 Model 907 with engine 651 Model 907.1/2/6 with engine 654.9
Remove/install engine with transmission Engine 654 in model 205, 253 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove install coolant return line for turbocharger Engine 654 in model 213, 238 except code M014 (Engine uprated)
Remove/install propeller shaft intermediate bearing and replace grooved ball bearing Model 257 with engine 654, 656
Approved wheel/tire combinations tire recommendation overview Model 118 (except 118.351/353/354/651/653/654) with code 460 (Canada version) with code 494 (US version) except code 498 (Japanese version) except code 625 (Australia specification) …
Oil pan tightening procedure Engine 654 in model 205, 213, 238, 257 with code M005 (Vehicles with 4MATIC/all-wheel drive) Engine 654 in model 253
Remove/install left circulation pump in engine compartment for low-temperature circuit Engine 654 in model 213, 238, 257
Remove/install chain tensioner Engine 654 in model 205, 253 Engine 656 in model 253
Check main circuit coolant level Engine 177, 254, 256, 264, 274, 276.8, 642, 654, 656 in model 213
Replace oil filter element Engine 654.9 in model 907.1/2/6
Drain/pour in coolant Engine 654.9 in model 907.1/2/6
Remove/install exhaust gas recirculation cooler bypass switchover valve Engine 654 in model 205 Engine 654 in model 253 except code 460 (Canada version) except code 494 (US version)
Mount/remove support fixture for engine/transmission unit for repair operations Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install bottom part of oil pan Engine 654 in model 205, 253
Remove/install air duct housing Engine 654 in model 213, 238, 257 with code M014 (Engine uprated)
Check engine oil level with instrument cluster Engine 254, 256, 264, 654, 656 in model 213 Engine 256 in model 290 Engine 256, 654, 656 in model 238 Engine 264, 654 in model 205 Engine 264, 654, 656 in model 253
Remove/install second refrigerant compressor Engine 642 in model 907.6/7 with code HK4 (Rear air conditioning, reinforced) Engine 651 in model 907.6/7 with code HK4 (Rear air conditioning, reinforced) Engine 654.9 in model 907.6 with …
Remove/install crankshaft Hall sensor Engine 654 in model 205, 253 Engine 656 in model 253
Refrigerant compressor remove/install Engine 654.9 in model 907.1/2/6
Remove/install timing case cover Engine 654 in model 118, 177, 247
Remove/install radiator Engine 654 in model 205.013/213, 253 Engine 656 in model 253
Remove/install engine covers Engine 654 in model 247
Remove/install oil feed line for turbocharger Engine 654 in model 205, 253 except code M014 (Engine uprated)
Check high-voltage battery cooling system for leak tightness Engine 654 in model 213.011/016/211/216 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install cap on AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Approved wheel/tire combinations tire recommendation overview Model 117.352/952, 118.351/353/354/651/653/654, 156.952, 167.161/188/189/361/989, 177.051/053/054/151/951, 213.061/064/088/089/261/264/288/289, …
Remove/install hydraulic valve clearance compensating elements Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install catalytic converter Engine 654 in model 205.### 1# , 253.### 1#
Remove/install Hall sensor of camshaft Engine 654 in model 213, 238, 257
Replace rear radial shaft sealing ring Engine 654 in model 118, 177, 247
Remove/install charge air cooler Engine 654 in model 213, 238, 257
Remove/install temperature sensor upstream of turbocharger Engine 654 in model 213, 238, 257 with code M014 (Engine uprated)
Set basic position of camshafts Engine 654 in model 213, 238, 257
Remove/install front stabilizer bar Model 447 with engine 651 except code ZG2 (Permanent all-wheel drive) Model 447 with engine 654.9 except code ZG2 (Permanent all-wheel drive) Model 447, 448 with engine 274
Remove/install belt pulley/vibration damper Engine 654.9 in model 907.1/2/6
Remove/install charge air temperature sensor upstream of throttle valve Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install engine with transmission Engine 654 in model 118, 177, 247 with transmission 724.1
Remove/install alternator Engine 654.9 in model 213 (except 213.011/016/211/216) Engine 654.9 in model 238, 257
Remove/install engine cover Engine 654.9 in model 447
Remove/install low-pressure exhaust gas recirculation valve Engine 654 in model 213, 238, 257
Remove/install coolant pump pump unit Engine 654 in model 205, 253
Remove/install fuel injectors Engine 654 in model 205, 253
Draw in timing chain Engine 654, 656
000 588 08 31 00 Mounting fork adapter Engine 254, 256 Engine 651 in model 166, 172, 204, 205, 207, 212, 218, 221, 222, 253 Engine 651 in model 447, 636, 639 Engine 651 in model 900, 906, 907 Engine 654, 656 Engine 654.9 in …
Remove/install radiator unit Engine 654 in model 205.013/213
Remove/install camshaft housing with camshafts Engine 654 in model 205, 253
Oil pan tightening procedure Engine 654 in model 167 Engine 654 in model 205, 213, 238, 257 except code M005 (4MATIC)
Remove/install timing case cover Engine 654 in model 213, 238, 257
Flush engine cooling system Engine 642 in model 906, 907 Engine 651 in model 900, 906, 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install charge air distributor Engine 654 in model 213, 238, 257
Remove/install engine oil fill level sensor Engine 654 in model 205, 253 Engine 656 in model 253
Check main circuit coolant level Engine 177, 264, 274, 276, 642, 651, 654, 656 in model 253
Overview of recommended tires Model 118 (except 118.351/353/354/651/653/654)
Remove/install turbocharger Engine 654 in model 205, 253 except code M014 (Engine uprated)
Remove/install exhaust system Engine 654 in model 213, 238, 257
Remove/install high pressure line Engine 654 in model 213, 238, 257
Remove/install balance shafts with crankshaft bearing caps Engine 654 in model 118, 177, 247
Remove oil from cooling and heating system Engine 651 in model 900 Engine 651 in model 907, 910 Engine 651.955/956/957 in model 906 Engine 654.9 in model 907.1/2/6
Remove/install transmission with torque converter 11.05.2020 Transmission 725.0 in model 213, 238 with engine 264 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 274 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 642 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238 with engine 654 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install throttle valve actuator Engine 654 in model 213, 238, 257
Remove/install glow output stage Engine 654 in model 213, 238, 257
Check engine oil level with instrument cluster Engine 256, 264, 654, 656 in model 257
Remove/install underbody paneling Model 447 with engine 651 with code MX0 (BlueEFFICIENCY package) Model 447 with engine 654.9
Notes for ceramic glow plugs Engine 607, 640, 642, 646.7/8/9, 651, 654, 656
Remove/install condenser Model 257 with engine 256.9, 264, 654, 656 Model 290 with engine 256.9
Remove/install starter Engine 654 in model 205, 253
Empty AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install engine cover Engine 654 in model 167
Remove/install retaining lock for crankshaft Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install front stabilizer bar Model 447 with engine 651 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 654.9 with code ZG2 (Permanent all-wheel drive)
Remove/install air filter housing Engine 654 in model 205, 253 Engine 656 in model 253
Tighten bolts on high-pressure exhaust gas recirculation cooler Engine 654
Perform run-in program after engine replacement Engine 651 in model 636, 639 Engine 651 in model 900 Engine 651 in model 906 Engine 651, 654 in model 907, 910
Oil pan bottom section tightening procedure Engine 654
Remove/install NOx sensor with control unit downstream of SCR catalytic converter on underbody Engine 654.8 in model 257 with code 972 (Exhaust system with DPF, generation 2.0)
Remove/install engine cover Engine 654 in model 118, 177, 247
Check visible area of poly-V belt for wear Model 118 with engine 260, 282, 608, 654 Model 167 with engine 264, 654, 656 Model 177 with engine 260, 282, 608, 654 Model 205 (except 205.047/053/054/147/247/253) with engine 264, …
Remove/install high pressure line Engine 654 in model 205, 253
Remove/install injection nozzle for exhaust aftertreatment system Engine 654 in model 213, 238, 257
Remove/install desiccant cartridge Model 257 with engine 654, 656
Remove/install rear engine mount Model 205 with engine 264, 274, 276.8, 651, 654 Model 253 with engine 264, 274, 276.8, 642, 651, 654, 656
Remove/install heat shield under diesel particulate filter Engine 654
Remove/install clutch 19.05.2020 Model 907 with engine 642, 651 with transmission 711.6 Model 907 with engine 651 with transmission 700.790 Model 907.1/2/6 with engine 654.9 with transmission 711.6 Model 910 with engine 651 with transmission 700.76
Attach/detach engine hoist Model 213 with engine 264, 274, 642, 654 Model 238 with engine 264, 274, 642, 654 Model 257 with engine 264, 654
Approved wheel/tire combinations overview Model 118 (except 118.351/353/354/651/653/654) with code 460 (Canada version) with code 494 (US version) except code 498 (Japanese version) except code 625 (Australia specification) …
Remove/install piston rings Engine 654 in model 213, 238, 257
Notes on evaluating two-mass flywheels Engine 271, 651 in model 906 Engine 274, 622, 651, 654 in model 447 Engine 651 in model 636, 639 Engine 651 in model 900 Engine 651 in model 907, 910 Engine 654.9 in model 907
Remove/install low-pressure exhaust gas recirculation valve Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install front exhaust system Engine 654.9 in model 907.1/2/6
Remove/install guide pulley for refrigerant compressor poly-V-belt Engine 654.9 in model 907.6 with code HK4 (Rear air conditioning, reinforced)
Check engine cooling system for leaktightness Engine 177, 264, 274, 642, 654 in model 213 Engine 264 in model 257 Engine 264, 274.9, 642, 654 in model 238
Remove/install heat shield under diesel particulate filter Engine 654.9 in model 907.1/2/6
Remove/install cap with front radial shaft sealing ring Engine 654 in model 213, 238, 257
Remove/install diesel fuel injection system control unit Engine 654 in model 213, 238, 257
Remove/install oil pan Engine 654 in model 213, 238, 257 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install temperature sensor upstream of turbocharger Engine 654 in model 205, 253 with code M014 (Engine uprated) Engine 656 in model 253
Remove/install refrigerant compressor poly-V-belt Engine 654.9 in model 907.6 with code HK4 (Rear air conditioning, reinforced)
Replace rear radial shaft sealing ring Engine 654.9 in model 907.1/2/6
Empty/fill AdBlue(R) tank Engine 654.9 in model 447
Remove/install oil pan Engine 654 in model 205 with code M005 (Vehicles with 4MATIC/all-wheel drive) Engine 654 in model 253
Check main circuit coolant level Engine 260, 282, 608, 654 in model 247
Remove/install transmission with torque converter Transmission 725.0 in model 907 with engine 274 Transmission 725.0 in model 907.1/2/6 with engine 654.9
Remove/install coolant expansion reservoir Model 213, 238 with engine 656 Model 257 with engine 654, 656
Remove/install cap with front radial shaft sealing ring Engine 654 in model 205, 253
Drain/fill low-temperature circuit coolant Engine 654, 656 in model 253
Tightening procedure for crankshaft bearing caps Engine 654
Disconnect/connect engine wiring harness to remove engine Model 213, 238, 257 with engine 654
Remove/install oil feed line for turbocharger Engine 654 in model 213, 238 except code M014 (Engine uprated)
Disconnect/connect engine wiring harness to remove cylinder head cover Engine 654 in model 253
Remove/install intermediate shaft Model 257 with engine 654.8 with transmission 725.1 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 257 with engine 656 with transmission 725.0 with code M005 (Vehicles with …
Remove/install rear engine support Model 213 with engine 274, 642, 654 Model 238 with engine 642, 654
Tightening procedure for exhaust manifold Engine 654
Check cylinder head bolts Engine 646 in model 203, 209 Engine 646.8 in model 211 Engine 646.951 in model 211.004 Engine 646.961 in model 211.006/206/606 Engine 647.961 in model 211.016/216/616 Engine 648 in model 220 Engine 648.961 in model 211.023/026/223/226 Engine 651 in model 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 221, 222, 246, 253 Engine 654 Engine 656
Remove/install exhaust gas recirculation (AGR) differential pressure sensor Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install transmission with torque converter 11.05.2020 Transmission 725.0 in model 213 with engine 274 except code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 642 except code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213 with engine 654 except code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 213, 238, 257 with engine 264 except code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 274 except code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 276.8 except code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 725.0 in model 238 with engine 654 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install oil feed line for turbocharger Engine 654 in model 205, 253 with code M014 (Engine uprated) Engine 656 in model 253
Remove/install mixing chamber Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install fuel tank Model 907 with engine 642, 651 Model 907.1/2/6 with engine 654.9
Open close coolant line coupling Engine 133, 139, 152, 156, 157, 159, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 622, 626, 629, 640, 642, 646, 651, 654, 656, 780
Tightening procedure for crankcase bottom section Engine 654 in model 167 Engine 654 in model 205, 213, 238, 257 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Drain/pour in coolant Model 213 with engine 274, 276.8, 642, 654 Model 238 with engine 274, 276.8, 642, 654
Remove/install diesel fuel injection system control unit Engine 654.9 in model 907.1/2/6
Check basic position of camshafts Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install pump on AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install belt pulley/vibration damper Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install transmission with torque converter Transmission 725.0 in model 205 with engine 654 Transmission 725.0 in model 253 with engine 654
Disconnect/connect engine wiring harness to remove cylinder head cover Engine 654 in model 213, 238, 257
Disconnect timing chain Engine 654, 656
Remove/install diesel oxidation catalytic converter Engine 654.9 in model 907.1/2/6
Remove/install differential pressure sensor Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install cylinder head cover Engine 654 in model 205, 253
Remove/install automatic transmission fluid cooler Transmission 725.0 in model 213, 238 with engine 654 Transmission 725.0 in model 213, 238, 257 with engine 264
Remove/install condenser Model 213 with engine 256.9, 264, 274, 276.8, 654, 656 Model 213 with engine 642 except code 1U6 (R744 refrigerant) Model 238 with engine 256.9, 264, 274, 276.8, 642, 654, 656
Routing diagram of poly-V belt Engine 654.9 in model 907.1/2/6
Remove/install air intake duct upstream of turbocharger Engine 654 in model 213, 238, 257
Remove/install automatic transmission Transmission 725.0 in model 213.016/216 with engine 654 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install AdBlue(R) metering valve in engine compartment Engine 654.9 in model 907.1/2/6
Notes on the assessment of pistons and piston rings Engine 607, 608, 611, 612, 613, 622, 626, 628, 629, 639, 640, 642, 646, 647, 648, 651, 654, 656, 668, 699
Check main circuit coolant level Engine 260, 282, 608, 654 in model 177
Remove/install lower crankcase section at removed engine Engine 654 in model 213, 238, 257 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install rear cover on cylinder head Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install poly-V-belt tensioning device Engine 654.9 in model 213, 238, 257
Empty/fill fuel tank Model 907 with engine 274 Model 907 with engine 642, 651 Model 907.1/2/6 with engine 654.9 Model 910
Remove/install engine with transmission Engine 654 in model 213, 238, 257 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Check main circuit coolant level Engine 256.9, 264, 654, 656 in model 257
Remove/install balance shafts with crankshaft bearing caps Engine 654 in model 213, 238, 257
Remove/install fan unit Model 213 with engine 274.9, 642, 654
Remove/install drive plate Engine 654.9 in model 907.1/2/6
Remove/install charge air cooler Engine 654 in model 205, 253
Remove/install circulation pump for low-temperature water circuit Engine 274, 654 in model 213, 238
Remove/install low-pressure exhaust gas recirculation cooler Engine 654 in model 213, 238, 257
Remove/install cylinder head Engine 654 in model 205, 253
Remove/install diesel particulate filter Engine 654 in model 213.### 1# , 238.### 1# , 257.### 1#
Mount/remove support fixture for removal of engine/transmission unit Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Remove/install air duct housing Engine 654 in model 205, 253 with code M014 (Engine uprated) Engine 656 in model 253
Remove/install bracket for diesel injection system control unit Engine 654.9 in model 907.1/2/6
Remove/install piston Engine 654 in model 118, 177, 247
Check poly-V belt for wear and damage Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install exhaust manifold Engine 654.8 in model 213, 238, 257
Place balance shafts in basic position Engine 654
Prepare engine support fixture during repair work in vehicle Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Mount crankshaft axially Engine 651, 654
Remove/install mixing chamber Engine 654.9 in model 907.1/2/6
Remove/install condenser Model 205 (except 205.013/213) with engine 274, 276, 626, 651, 654 Model 253 with engine 274, 276, 642, 651
Removing installing ventilation housing Model 907 with engine 274 Model 907 with engine 642, 651, 654.9 Model 910 with engine 651 Model 910 with engine 780.703
Remove/install flywheel / drive plate Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install crankshaft Engine 654 in model 213, 238, 257
Remove/install rear underbody paneling Model 447 with engine 651 with code MX0 (BlueEFFICIENCY package) Model 447 with engine 654.9
Remove/install electric refrigerant compressor Model 213.011/211 with engine 654.9 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Detach/attach valve on high-pressure exhaust gas recirculation cooler Engine 654
Remove/install exhaust flap controller Engine 654 in model 213, 238
Remove/install air filter housing Engine 654.9 in model 907.1/2/6
Notes about Common-Rail components Engine 607, 608 in model 415 Engine 607, 608, 626, 628, 629, 642, 646.8/9, 651, 654, 656 Engine 622, 651, 654 in model 447 Engine 639.939 in model 454.0 Engine 642, 646, 651 in model …
Remove/install oil pan Engine 654 in model 205 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install engine intake air duct downstream of air filter Engine 654 in model 213, 238, 257
Remove/install fan unit Engine 654, 656 in model 257 Engine 656 in model 213, 238
Remove/install NOx sensor with control unit upstream of diesel oxidation catalytic converter Engine 654.9 in model 907.1/2/6
Remove/install oil pan Engine 654 in model 213, 238, 257 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Engine oil and oil filter change Engine 654.9 in model 907.1/2/6
Oil pan tightening procedure Engine 654 in model 118, 177, 247
Bleed clutch operating system Model 447 with engine 274, 651, 654
Remove/install transmission Model 907 with engine 642, 651 with transmission 711.6 Model 907.1/2/6 with engine 654.9 with transmission 711.6
Remove/install radiator unit Engine 654, 656 in model 253
Install new radial sealing ring on outside right of front axle gear Model 257 with engine 654.8 with transmission 725.1 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 257 with engine 656 with transmission 725.0 with code M005 (Vehicles with …
Remove/install drive shaft radial shaft sealing ring TRANSMISSION 711.653 /655, 716.613 /631 /638 /654 /664 /656 /669 Transmission removed
Remove/install diesel particulate filter Engine 654 in model 205.### 1# , 253.### 1#
Remove/install bracket for air filter housing Engine 654.9 in model 907.1/2/6
Remove/install engine with transmission Engine 654 in model 118, 177, 247 with transmission 711.63
Remove/install exhaust and coolant line upstream of high-pressure exhaust gas recirculation valve Engine 654
Remove/install left circulation pump in engine compartment for low-temperature circuit Engine 654 in model 205, 253
Remove/install right circulation pump for low-temperature circuit Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install low-pressure exhaust gas recirculation cooler Engine 654 in model 205, 253 Engine 656 in model 253
Open and close coupling Engine 133, 139, 152, 156, 157, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 626, 629, 640, 642, 646, 651, 654, 656, 780
Remove/install upper slide rail Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install poly-V-belt tensioning device Engine 654 in model 205, 253
Remove/install belt pulley/vibration damper Engine 654 in model 213, 238, 257
Remove/install lower engine compartment lining Model 118 with engine 608, 654 Model 177 with engine 608, 654 Model 247 with engine 608, 654
Remove/install propeller shaft Model 257 with engine 654, 656
Remove/install crankshaft position sensor Engine 654.9 in model 907.1/2/6
Remove/install NOx sensor with control unit upstream of diesel oxidation catalytic converter Engine 654 in model 205, 253
Remove/install charge air distributor Engine 654 in model 205, 253
Remove/install air filter housing Engine 654 in model 213, 238, 257
Tightening procedure for cover on cylinder head Engine 654, 656
Remove/install upper slide rail Engine 654 in model 213, 238, 257
Remove/install exhaust aftertreatment unit Engine 654 in model 205.### 2# , 253.### 2#
Empty/fill AdBlue(R) tank Engine 654, 656 in model 167 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3)
Remove/install poly-V-belt tensioning device Engine 654.9 in model 907.1/2/6
Remove/install injectors Engine 654 in model 213, 238, 257
Remove/install condenser Model 205.013/213 with engine 654 Model 253 with engine 654, 656
Check oil pressure Engine 654 in model 213, 238, 257
Approved wheel/tire combinations tire recommendation overview Model 118 (except 118.351/353/354/651/653/654) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except code 625 (Australia …
Remove/install boost pressure sensor for low-pressure exhaust gas turbocharger Engine 654.8 in model 213, 238, 257
Remove install coolant feed line for turbocharger Engine 654 in model 213, 238, 257 with code M014 (Engine uprated)
Remove/install electric refrigerant compressor Engine 654.8 in model 213 (except 213.011/016/211/216), 238, 257
Remove/install cap with front radial shaft sealing ring Engine 654 in model 118, 177, 247
Remove/install leak oil line to injectors Engine 654 in model 205, 253
Remove/install filler neck of fuel tank Model 907 with engine 642, 651 Model 907.1/2/6 with engine 654.9 Model 910
Replace valve stem seals Engine 654
Remove/install NOx sensor with control unit downstream of front SCR catalytic converter Engine 654 in model 213, 238, 257
Refrigerant compressor remove/install Engine 654 in model 205, 253
Check main circuit coolant level Engine 177, 264, 274, 276, 626, 651, 654 in model 205
Remove/install cylinder head Engine 654 in model 213, 238, 257
Replace oil filter element Model 447 with engine 654
Remove/install leak oil line to injectors Engine 654 in model 213, 238, 257
Remove/install glow plugs Engine 654 in model 213, 238, 257
Remove/install NOx sensor with controller unit upstream of catalytic converter Engine 654 in model 213, 238, 257
Remove/install rail Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install air intake duct upstream of turbocharger Engine 654 in model 205, 253 Engine 656 in model 253
Overview of service intervals for diesel engines depending on engine oil specification Engine 607, 611, 612, 626, 628, 629, 640, 642, 646, 647, 648, 651, 654, 660 Engine 612, 628, 642 in model 463
Check main circuit coolant level Engine 176, 177, 256, 264, 274, 654, 656 in model 167
Drain/pour in coolant Engine 654, 656 in model 253
Rivet timing chain Engine 654, 656
Remove/install catalytic converter temperature sensor Engine 654 in model 213, 238, 257
Check engine oil level with instrument cluster Engine 642.8, 651.9 in model 907 except code C6L (Multifunction steering wheel) Engine 651.9 in model 910 except code C6L (Multifunction steering wheel) Engine 654.9 in model 907.1/2/6 …
Bolt plan for timing case cover Engine 654
Drain/pour in coolant Engine 654 in model 205
Inspect cooling system for leaks Engine 177, 264, 274.9, 276.8, 626, 651, 654 in model 205 Engine 264, 274.9, 276.8, 642, 651, 654, 656 in model 253
Clip: Remove/install diesel particulate filter Engine 654.9 in model 907.1/2/6 with code MP5 (Engine version Euro 5) Engine 654.9 in model 907.1/2/6 with code MP6 (Engine version, Euro VI) Engine 654.9 in model 907.1/2/6 with code …
Remove/install starter Engine 654.9 in model 907.1/2/6
Remove/install NOx sensor with control unit upstream of SCR catalytic converter Engine 654.9 in model 907.1/2/6
Approved wheel/tire combinations overview Model 118 (except 118.351/353/354/651/653/654) with code 498 (Japanese version) except code 460 (Canada version) except code 494 (US version) except code 625 (Australia specification) …
Remove/install hot film mass air flow sensor Engine 654.9 in model 907.1/2/6
Remove/install poly-V-belt guide pulley Engine 654.9 in model 907.1/2/6
Overview of tire air pressure labels Model 117.352/952, 118.351/353/354/651/653/654, 156.952, 167.161/188/189/361/989, 177.051/053/054/151/951, 213.061/064/088/089/261/264/288/289, …
Slacken tension poly-V belt Engine 654.9 in model 907.1/2/6
Remove/install exhaust manifold Engine 654 in model 205, 253
Remove/install rear cover on cylinder head Engine 654 in model 213, 238, 257
Approved wheel/tire combinations tire recommendation overview Model 118 (except 118.351/353/354/651/653/654) with code 498 (Japanese version) except code 460 (Canada version) except code 494 (US version) except code 625 (Australia specification) …
Engine oil and oil filter change Engine 654 in model 205, 213, 238, 253, 257 except code M014 (Engine uprated)
Overview of tire air pressure labels Model 118 (except 118.351/353/354/651/653/654) with code 830 (China version) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except …
Remove/install cooler of high-voltage battery cooling system Engine 654 in model 213.011/016/211/216 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install front axle shafts Model 257 with engine 654.8 with transmission 725.1 with code M005 (Vehicles with 4MATIC/all-wheel drive) Model 257 with engine 656 with transmission 725.0 with code M005 (Vehicles with …
Remove/install rail Engine 654 in model 213, 238, 257
Remove/install transmission carrier Engine 654.9 in model 907.1/2/6
Remove/install throttle valve actuator Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install exhaust gas temperature sensor of exhaust gas aftertreatment unit Engine 654.9 in model 907.1/2/6
Remove/install cylinder head cover Engine 654 in model 118, 177, 247
Drain/pour in coolant Engine 654 in model 257 Engine 656 in model 213, 238, 257
Remove/install expansion reservoir Engine 264, 274.9, 276.8, 642, 651, 654, 656 in model 253 Engine 264, 274.9, 276.8, 651, 654 in model 205
Remove/install alternator Engine 654 in model 205, 253 except code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install diesel particulate filter temperature sensor Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install exhaust gas flap controller Engine 654 in model 253
Remove/install piston Engine 654 in model 205, 253
Remove/install air intake pipe Engine 654.9 in model 447
Remove/install rear cover on cylinder head Engine 654 in model 118, 177, 247
Tightening procedure for camshaft housing Engine 654
Remove/install electric refrigerant compressor Engine 654 in model 205.013/213, 253.311/911
Remove/install fan unit Engine 264 in model 213 Engine 264, 274.9, 642, 654 in model 238
Overview of tire air pressure labels Model 118 (except 118.351/353/354/651/653/654) with code 625 (Australia specification) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) …
Remove/install starter Engine 654.9 in model 213, 238, 257
Remove/install right underbody paneling Model 447 with engine 651 with code MX0 (BlueEFFICIENCY package) Model 447 with engine 654.9
Remove/install rear engine mount Model 213 with engine 274, 642, 654 Model 238 with engine 642, 654
Remove/install engine from/onto front axle carrier Engine 654 in model 205, 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)
Measure torsional play of two-mass flywheel Engine 651 in model 907 with transmission 711.6 Engine 651 in model 910 with transmission 700.760 Engine 654.9 in model 907.1/2/6 with transmission 711.6
Check engine cooling system for leaktightness Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install flywheel / drive plate Engine 654 in model 213, 238, 257
Pressing front axle shaft out of front axle shaft flange Model 447 with engine 622 Model 447 with engine 651 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive) Model 447 with engine …
Lock camshaft sprocket Engine 654, 656
Remove/install coolant expansion reservoir of auxiliary circuit Engine 654 in model 205.013/213, 253.311/911
Remove/install differential pressure sensor Engine 654.8 in model 213, 238, 257
Attach/detach engine hoist Model 205 with engine 651, 654 Model 253 with engine 642, 651, 654, 656
Remove/install engine cover Engine 654.9 in model 907.1/2/6
Remove/install impact plate in front of poly-V-belt Engine 654.8 in model 213, 238, 257
Remove/install piston Engine 654 in model 213, 238, 257
Remove/install rear engine support Engine 264, 274, 276.8, 642, 651, 654, 656 in model 253 Engine 264, 274, 276.8, 651, 654 in model 205
Remove/install valves Engine 654 in model 213, 238, 257
Remove/install hydraulic valve clearance compensating elements Engine 654 in model 213, 238, 257
Remove/install lower crankcase section at removed engine Engine 654 in model 118, 177, 247
Engine oil and oil filter change Model 447 with engine 654
Check engine oil level with instrument cluster Engine 260, 282, 608, 654 in model 118 Engine 260, 282, 608, 654 in model 177 Engine 260, 282, 608, 654 in model 247
Empty/fill AdBlue(R) tank Model 213, 238, 253, 257 with engine 654 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) Model 213, 238, 253, 257 with engine 656 with code U79 (BLUETEC (SCR) …
Remove/install diesel particulate filter Engine 654.9 in model 907.1/2/6 with code MP5 (Engine version Euro 5)
Remove/install glow plugs Engine 654 in model 205, 253
Empty/fill AdBlue(R) tank Engine 654 in model 118, 177, 247
Remove/install oxygen sensor upstream of catalytic converter Engine 654.9 in model 907.1/2/6
Overview of tire air pressure labels Model 118 (except 118.351/353/354/651/653/654) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except code 625 (Australia …
Inspect cooling system for leaks Engine 654 in model 257 Engine 656 in model 213, 238, 257
Remove/install AdBlue(R) metering valve Engine 654 in model 205, 253 Engine 656 in model 253
Unfasten/fasten cable duct Engine 654
Empty/fill AdBlue(R) tank Model 205 with engine 654
Pour in coolant and bleed engine cooling system Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654 in model 907
Check main circuit coolant level Engine 260, 282, 608, 654 in model 118
Remove/install turbocharger Engine 654 in model 205, 253 with code M014 (Engine uprated)
Remove/install front engine mount Engine 654 in model 205, 253 with code M005 (Vehicles with 4MATIC/all-wheel drive)
General information on inspecting cylinder walls Engine 133, 139, 156, 176, 177, 178, 254, 256.9, 276.8, 654, 656 Engine 159
Remove/install fan unit Engine 654 in model 205
Check engine oil level with instrument cluster Engine 642.8, 651.9 in model 907 with code C6L (Multifunction steering wheel) Engine 651.9 in model 910 with code C6L (Multifunction steering wheel) Engine 654.9 in model 907.1/2/6 with …
Remove/install turbocharger Engine 654 in model 213, 238, 257 with code M014 (Engine uprated)
Detach/attach torque converter of clutch plate Transmission 725.0 in model 907.1/2/6 with engine 654.9
Approved wheel/tire combinations overview Model 117.352/952, 118.351/353/354/651/653/654, 156.952, 167.161/188/189/361/989, 177.051/053/054/151/951, 213.061/064/088/089/261/264/288/289, …
Overview of tire air pressure labels Model 118 (except 118.351/353/354/651/653/654) with code 460 (Canada version) with code 494 (US version) except code 498 (Japanese version) except code 625 (Australia specification) …
Detach/attach front cover with radial shaft sealing ring Engine 654
Check oil pressure Engine 654 in model 205, 253 Engine 656 in model 253
Tightening procedure for charge air distributor Engine 654
Remove/install lower crankcase section at removed engine Engine 654 in model 205 except code M005 (Vehicles with 4MATIC/all-wheel drive)
Remove/install exhaust flap controller Engine 654 in model 205
Remove/install cover on vehicle jack support point Model 447 with engine 651 with code MX0 (BlueEFFICIENCY package) Model 447 with engine 654.9
Refrigerant compressor remove/install Engine 654.9 in model 238, 257
Remove/install high-pressure exhaust gas recirculation valve Engine 654 in model 213, 238, 257
Mount crankshaft radially in bearings Engine 651, 654
Remove/install poly-V belt Engine 654.9 in model 907.1/2/6
Remove/install fuel pump and fill level sensor Model 907 with engine 642, 651 Model 907.1/2/6 with engine 654.9 Model 910
Empty/fill AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install camshaft sprockets Engine 654 in model 213, 238, 257
Refrigerant compressor remove/install Engine 654.9 in model 213 (except 213.011/016/211/216)
Drain/fill coolant for high-voltage battery cooling system Engine 654 in model 213.011/016/211/216 with code ME05 (Hybrid drive 85 kW-94 kW variant (incl. plug-in))
Remove/install coolant pump Engine 654.9 in model 907.1/2/6
Remove/install transmission Transmission 716.7 in model 205 with engine 626 Transmission 716.7 in model 205, 253 with engine 651 Transmission 716.7 in model 205, 253 with engine 654
Remove/install AdBlue(R) metering valve on underbody Engine 654.8 in model 257 with code 972 (Exhaust system with DPF, generation 2.0)
Tightening procedure for crankcase bottom section Engine 654 in model 118, 177, 247
Disconnect oil return feed lines from exhaust gas turbocharger Engine 654, 656
Remove/install mixing chamber Engine 654 in model 213, 238, 257
Remove/install valve springs Engine 654 in model 205, 253 Engine 656 in model 253
Pour in coolant and bleed cooling system Engine 254, 256, 264, 654, 656
Remove/install transmission Model 238 with engine 654 with transmission 716.7
Remove/install engine intake air duct downstream of air filter Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install boost pressure sensor downstream of throttle valve Engine 654.9 in model 907.1/2/6
Remove/install diesel fuel injection system control unit Engine 654 in model 205, 253 Engine 656 in model 253
Empty/fill AdBlue(R) tank 02.01.2020 Engine 642 in model 213, 238, 253 with code U77 (Diesel Emission control BLUETEC (SCR)) Engine 654 in model 213, 238 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3)
Remove/install engine cover Engine 654 in model 213, 238, 257
Remove/install exhaust gas aftertreatment system control unit Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install charge air temperature sensor upstream of throttle valve Engine 654 in model 213, 238, 257
Remove/install rear engine mount Engine 654 in model 257 Engine 656 in model 213, 238, 257
Remove/install alternator Engine 654.9 in model 907.1/2/6
Remove/install retaining lock for crankshaft Engine 654 in model 213, 238, 257
Detach attach and secure hexagon collar nut of front axle shaft Model 447 with engine 622 Model 447 with engine 651 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive) Model 447 with engine …
Remove/install charge air pipe downstream of turbocharger Engine 654 in model 167, 205, 213, 238, 253, 257 except code M014 (Engine uprated)
Fill AdBlue(R) tank Engine 642 in model 907 Engine 651 in model 907, 910 Engine 654.9 in model 907.1/2/6
Remove/install valves Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install turbocharger Engine 654 in model 213, 238 except code M014 (Engine uprated)
Remove/install SCR catalytic converter diesel particulate filter unit Engine 654.9 in model 907.1/2/6 with code MP6 (Engine version, Euro VI) Engine 654.9 in model 907.1/2/6 with code MT2 (Emissions class Euro 6d-TEMP N1 GR.III/N2)
Remove/install camshaft sprockets Engine 654 in model 205, 253 Engine 656 in model 253
Remove/install oil feed line for turbocharger Engine 654 in model 213, 238, 257 with code M014 (Engine uprated)
Remove/install catalytic converter Engine 654 in model 213.### 1# , 238.### 1# , 257.### 1#
Remove/install coolant thermostat Engine 654.9 in model 907.1/2/6
Approved wheel/tire combinations overview Model 118 (except 118.351/353/354/651/653/654) except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except code 625 (Australia …
Remove/install high-pressure exhaust gas recirculation cooler Engine 654 in model 213, 238, 257
Remove/install alternator belt pulley Engine 654.9 in model 907.1/2/6
Replace rear radial shaft sealing ring Engine 654 in model 205, 253 Engine 656 in model 253
Test alternator diodes Model 447 with engine 274, 622, 651, 654 Model 448 with engine 274 Model 470, 471 Model 907 with engine 274, 654
Wiring diagram for fuel pump control unit Engine 274 in model 907 Control unit N118/9 Engine 642 in model 907 Control unit N118/9 Engine 651 in model 907 Control unit N118/9 Engine 654 in model 907 Control unit N118/9
Wiring diagram for glow output stage Engine 654 in model 907 Control unit N14/8
Wiring diagram for common rail direct injection (CDI) control unit Engine 654 in model 907 with code MU1 (OM 654 DE 20 LA 84 kW (114 hp) 3800 rpm) Control unit N3/40 plug 6 Engine 654 in model 907 with code MU3 (OM 654 DE 20 LA 110 kW (150 hp) …
Wiring diagram for common rail direct injection (CDI) control unit Engine 654 in model 907 with code MU1 (OM 654 DE 20 LA 84 kW (114 hp) 3800 rpm) Control unit N3/40 plugs 3, 4, 5 Engine 654 in model 907 with code MU3 (OM 654 DE 20 LA 110 kW …
Wiring diagram for NOx sensor Engine 642 in model 907 Sensor N37/7, N37/8 Engine 651 in model 907 Sensor N37/7, N37/8 Engine 654 in model 907 Sensor N37/7, N37/8, N37/13
Wiring diagram for common rail direct injection (CDI) control unit Engine 654 in model 907 with code MU1 (OM 654 DE 20 LA 84 kW (114 hp) 3800 rpm) Control unit N3/40 plugs 1, 2 Engine 654 in model 907 with code MU3 (OM 654 DE 20 LA 110 kW (150 …
Remove/install lower engine stabilizer mount Engine 608, 654 in model 118, 177, 247
Remove/install high-voltage battery Engine 274 in model 205.053/054/253, 213.053/054/153/253 Engine 654 in model 205.013/213, 213.016/216
Remove/install exhaust system Engine 654 in model 118, 177, 247
Remove/install condenser Engine 654 in model 118, 177, 247
Remove/install upper engine stabilizer mount Engine 654 in model 118, 177, 247
Remove/install camshaft sprockets Engine 654 in model 118, 177, 247
Check air conditioning system for leakage Model 118 with engine 139, 260, 282, 608, 654 Model 177 with engine 139, 260, 282, 608, 654 Model 247 with engine 260, 282, 608, 654 Model 247.7 with engine 139
Fill AdBlue(R) tank Model 213, 238, 253, 257 with engine 656 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) with filling unit Model 257 with engine 654 with code U79 (BLUETEC (SCR) …
Inspect cooling system for leaks Engine 608, 654 in model 118, 177, 247
Bleed clutch operating system Model 118, 177, 247 with engine 282 with transmission 711.6 Model 118, 177, 247 with engine 608 with transmission 711.6 Model 118, 177, 247 with engine 654 with transmission 711.6
Remove/install high-pressure exhaust gas recirculation cooler Engine 654 in model 118, 177, 247
Fill AdBlue tank Engine 642 in model 213, 238, 253 with code U77 (Diesel Emission control BLUETEC (SCR)) with filling unit Engine 654 in model 213, 238 with code U79 (BLUETEC (SCR) diesel exhaust …
Remove/install low-pressure exhaust gas recirculation cooler Engine 654 in model 118, 177, 247
Remove/install valves Engine 654 in model 118, 177, 247
Remove/install upper slide rail Engine 654 in model 118, 177, 247
Remove/install oil suction pipe Engine 654 in model 118, 177, 247
Remove/install air intake duct upstream of turbocharger Engine 654 in model 118, 177, 247
Remove/install clutch Model 118, 177, 247 with engine 282 with transmission 711.63 Model 118, 177, 247 with engine 608 with transmission 711.63 Model 118, 177, 247 with engine 654 with transmission 711.63
Remove install engine charge air channel at turbocharger Engine 654 in model 118, 177, 247
Remove/install sensor unit of temperature sensors Engine 654 in model 118, 177, 247
Set basic position of camshafts Engine 654 in model 118, 177, 247
Remove/install front module Model 118, 177, 247.0 with engine 260, 282, 608, 654
Remove/install powertrain control unit Engine 139, 260, 282, 608, 654 in model 118, 177, 247
Fill AdBlue(R) tank Engine 654 in model 118, 177, 247 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3)
Drain/pour in coolant Engine 654 in model 118, 177, 247
Fill AdBlue(R) tank Engine 654, 656 in model 167 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) with refill canister
Remove/install flywheel / drive plate Engine 654 in model 118, 177, 247
Remove/install retaining lock for crankshaft Engine 654 in model 118, 177, 247
Remove/install fan unit Model 118, 177, 247 with engine 654
Fill AdBlue(R) tank Engine 654, 656 in model 167 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) with filling unit
Refrigerant compressor remove/install Engine 654 in model 118, 177, 247
Remove/install chain tensioner Engine 654 in model 118, 177, 247
Fill AdBlue(R) tank Model 205, 253 with engine 654 with refill canister
Remove/install washer fluid reservoir of windshield washer system Model 118, 177, 247 with engine 260, 282, 608, 654
Drain evacuate and recharge air conditioning check for proper operation and check for leaks Model 118 with engine 139, 260, 282, 608, 654 Model 177 with engine 139, 260, 282, 608, 654 Model 247 with engine 260, 282, 608, 654 Model 247.7 with engine 139
Remove/install hydraulic valve clearance compensating elements Engine 654 in model 118, 177, 247
Remove install coolant return line for turbocharger Engine 654 in model 118, 177, 247
Remove/install oil feed line for turbocharger Engine 654 in model 118, 177, 247
Fill AdBlue(R) tank Model 205, 253 with engine 654 with filling unit
Remove/install Hall sensor of camshaft Engine 654 in model 118, 177, 247
Remove/install coolant expansion reservoir Engine 654 in model 118, 177, 247
Remove/install engine oil fill level sensor Engine 654 in model 118, 177, 247
Remove install coolant feed line for turbocharger Engine 654 in model 118, 177, 247
Remove/install right engine mount Engine 654 in model 118, 177, 247
Remove/install turbocharger Engine 654 in model 118, 177, 247
Remove/install glow plugs Engine 654 in model 118, 177, 247
Remove/install starter Engine 654 in model 118, 177, 247
Fill AdBlue(R) tank Model 213, 238, 253, 257 with engine 656 with code U79 (BLUETEC (SCR) diesel exhaust treatment, generation 3) with refill canister Model 257 with engine 654 with code U79 (BLUETEC …
Check basic position of camshafts Engine 654 in model 118, 177, 247
Remove/install exhaust manifold Engine 654 in model 118, 177, 247
Remove/install rail Engine 654 in model 118, 177, 247
Remove/install exhaust aftertreatment unit Engine 654 in model 118, 177, 247
Remove/install fuel injectors Engine 654 in model 118, 177, 247
Empty AdBlue(R) tank Engine 654 in model 118, 177, 247
Remove/install desiccant cartridge Model 118, 177, 247 with engine 608, 654 with code 2U8 (Alternative refrigerant)
Remove/install diesel fuel injection system control unit Engine 654 in model 118, 177, 247
Remove/install crankshaft Hall sensor Engine 654 in model 118, 177, 247
Disconnect/connect engine wiring harness to remove engine Engine 654 in model 118, 177, 247
Remove/install exhaust gas temperature sensor downstream of SCR catalytic converter Engine 654 in model 118, 177, 247
Remove/install camshaft housing with camshafts Engine 654 in model 118, 177, 247
Remove/install air filter housing Engine 654 in model 118, 177, 247
000 588 18 31 00 Adapter Engine 654.8/9
Remove/install charge air distributor Engine 654 in model 118, 177, 247
Remove/install belt pulley/vibration damper Engine 654 in model 118, 177, 247
Remove/install piston rings Engine 654 in model 118, 177, 247
Fill AdBlue tank Engine 642 in model 213, 238, 253 with code U77 (Diesel Emission control BLUETEC (SCR)) with refill canister Engine 654 in model 213, 238 with code U79 (BLUETEC (SCR) diesel exhaust …
Remove/install crankshaft Engine 654 in model 118, 177, 247
Remove/install poly-V belt Engine 654 in model 118, 177, 247