Service manual Mercedes 725 Transmission

AH27.00-S-1000-01PS General information on repair work on Topical note.pdf
– transmission
– Transmission 700.4 in model 190, 197
– Transmission 722.9 in model 447
– with code ZG2 (Permanent all-wheel drive)
– Transmission 722.9 in model 470, 471
– Transmission 722.96/97
– Transmission 725.0 in model 447, 448
– Transmission 725.0 in model 907
– Absolute cleanliness must be ensured when working on the
– transmission. Thoroughly clean area around the separating point before opening the hydraulic system. Use only lint-free cleaning cloths For repairs always wear oil-resistant, fiber-free gloves which are lined
– with rubber. Store transmission component parts in clean
– surroundings. Here it is recommended that you cover the component parts or store them in a clean plastic box with cover.Even the smallest foreign objects in the hydraulic components will lead to malfunctions and total failure of the transmission.
– Output shaft Transmission 722.9 in model 447
– Ring gear with code ZG2 (Permanent all-wheel drive)
– Needle roller bearing Transmission 722.96/97
– The transfer case cannot be replaced separately, it must be replaced Planet carrier
AH27.19-P-0001-01NKB Notes on automatic transmission.pdf
– AH27.19-P-0001-01NKB Notes on automatic transmission
– Transmission 700.42
– Transmission 700.750 in model 910
– Transmission 700.770 in model 470, 471
– Transmission 722.3/4/5/6/8/9
– Transmission 722.6 in model 636, 639
– Transmission 722.6 in model 902.6, 903.6, 904.6, 905.6
– Transmission 722.6 in model 906.1/2/6/7
– Transmission 722.9 in model 906, 907
– Transmission 723.3 in model 668, 670Transmission 723.6 in model 949, 950.5/6, 952.6, 957.38/5/6
– Transmission 723.6 in model 956, 963
– Transmission 723.6 in model 967
– Transmission 723.6 in model 970, 972, 975, 976
– Transmission 723.68
– Transmission 724.0/1/2
– Transmission 725.0 in model 907
– Transmission 725.0/1
– Transmission 725.0
– Absolute cleanliness is essential when working on the transmission. The transmission components should be stored in clean surrou ndings.
– Before opening the hydraulic circuit, thoroughly clean the area Here we recommend covering the components or storing them in a surrounding the separation point. Only lint-free cleaning cloths may be clean plastic box with a cover.used. Even the smallest dirt particles in the hydraulic components can lead to malfunctions and a total failure of the transmission.
– For repairs always wear oil-resistant, fiber-free gloves which are lined
– Only on transmission 700.750 in model 910, transmission 722.6 in Only on transmission 725.0 in model 907
– model 636, 639, transmission 722.6 in model 902.6, 903.6, 904.6, The hot measuring range on an automatic transmission at operat ing
AP27.00-S-2702EG Automatic transmission fluid and oil filter change 20.07.2020.pdf
– AP27.00-S-2702EG Automatic transmission fluid and oil filter change 20.07.2020
– Transmission 725.0 in model 447, 448
– 1 Plug
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove
– 1 Remove automatic transmission oil pan with
– automatic transmission oil filters.
– AR27.10-S-7031EA
– The automatic transmission oil pan and the
– automatic transmission oil filters are a single component part, and they can only be
– replaced together.
AR22.10-S-0006E Remove install transmission carrier 25.06.2019.pdf
– AR22.10-S-0006E Remove/install transmission carrier 25.06.2019
– Engine 654.9 in model 447
– Shown on transmission 725.0 without code
– ZG2 (Permanent all-wheel drive) with
– 1 Transmission carrier
– 2 AdBlue® line
AR22.10-S-0007EA Remove install transmission mount 02.07.2019.pdf
– AR22.10-S-0007EA Remove/install transmission mount 02.07.2019
– Engine 654.9 in model 447 with transmission 725.0
– with code ZG2 (Permanent all-wheel drive)
– 1 Transmission mount 2 Bolts
– Remove/install
– 1 Remove transmission carrier. AR22.10-S-0006E
– 2 Remove screws (2) and remove transmission *BA22.10-N-0007-01E Bolt, transmission mount to transmission
– mount (1).
AR27.00-D-0270-02TSC Check oil level in automatic transmission with.pdf
– AR27.00-D-0270-02TSC Check oil level in automatic transmission with
– ultrasound device, correct if necessary
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Automatic transmission fluids (ATF) BB00.40-P-0236-17A
– (specification 236.17)
AR27.00-D-0270TSC Fill automatic transmission with transmission oil 08.08.2019.pdf
– AR27.00-D-0270TSC Fill automatic transmission with transmission oil 08.08.2019
– Transmission 725.0 in model 907
– Modification notes
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.00-S-0001EA Drain fill transmission oil 02.09.2020.pdf
– AR27.00-S-0001EA Drain/fill transmission oil 02.09.2020
– Transmission 725.0 in model 447, 448
– Modification notes
AR27.00-S-0270-02EA Check oil level in automatic transmission with.pdf
– AR27.00-S-0270-02EA Check oil level in automatic transmission with
– ultrasound device, correct if necessary
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Automatic transmission fluids (ATF) BB00.40-P-0236-17A
– (specification 236.17)
AR27.00-S-0270EA Fill automatic transmission with transmission oil 20.07.2020.pdf
– AR27.00-S-0270EA Fill automatic transmission with transmission oil 20.07.2020
– Transmission 725.0 in model 447, 448
– S27.00-A002-79
– 1 Automatic transmission oil pan 2 Quick-release coupling 3 Adapter
– Risk of accident Warning from vehicle starting off by Secure vehicle to prevent it from starting off by AS00.00-Z-0005-01A
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Pour in automatic transmission fluid
– 1 Remove lower engine compartment paneling. AR61.20-S-1105E
AR27.10-D-0007TSC Remove install park pawl actuator 18.07.2019.pdf
– Transmission 725.0 in model 907
– S27.10-A005-79
– 1 Park pawl actuator 3 Transmission housing 5 Pilot bushing
– 2 Bolts 4 Shift rod
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
– 1 Remove fully integrated transmission control AR27.19-D-0200TSC
– (VGS) electric controller unit (N15/11).
AR27.10-D-0400-02TSC Remove install oil pump from transmission.pdf
– AR27.10-D-0400-02TSC Remove/install oil pump from transmission
– housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Transmission 725.0 in model 907
– 725 589 00 59 00
AR27.10-D-0400TSC Remove install oil pump 12.02.2020.pdf
– Transmission 725.0 in model 907
– Modification notes
– 1 Transmission housing
– 2 Bolts
– 3 Transmission firewall cover
– 4 Radial shaft sealing ring
– 1 Transmission housing6 Seal
– 7 Drive gear8 Chain
AR27.10-D-0500TSC Remove install transmission with torque converter 19.05.2020.pdf
– AR27.10-D-0500TSC Remove/install transmission with torque converter 19.05.2020
– Transmission 725.0 in model 907 with engine 274
– Transmission 725.0 in model 907.1/2/6 with engine 654.9
– Modification notes
– Shown on transmission 725.0 with engine 274
– 1 Transmission 4 Cover
– 2 Bolts 5 Electrical wiring harness
AR27.10-D-0600-01TSC Fasten removed transmission to assembly.pdf
– AR27.10-D-0600-01TSC Fasten removed transmission to assembly
– stand
– Transmission 725.0 in model 907
– 724 589 02 63 00 725 589 00 40 00
AR27.10-D-7031TSC Remove install automatic transmission oil pan 06.03.2020.pdf
– AR27.10-D-7031TSC Remove/install automatic transmission oil pan 06.03.2020
– Transmission 725.0 in model 907
– 1 Screw
– 35 Transmission housing
– P27.00-2406-06
AR27.10-S-0005EA Remove install automatic transmission 02.09.2020.pdf
– AR27.10-S-0005EA Remove/install automatic transmission 02.09.2020
– Model 447 with transmission 725.0
– except code ZG2 (Permanent all-wheel drive)
– Model 448 with transmission 725.0
– Modification notes
AR27.10-S-0005EB Remove install automatic transmission 25.08.2020.pdf
– AR27.10-S-0005EB Remove/install automatic transmission 25.08.2020
– Transmission 725.0 in model 447
– with code ZG2 (Permanent all-wheel drive)
AR27.10-S-0007EA Remove install park pawl actuator 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– S27.10-A005-79
– 1 Park pawl actuator 3 Transmission housing 5 Pilot bushing
– 2 Bolts 4 Shift rod
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove/install
AR27.10-S-0400EA Remove install oil pump 19.08.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.10-S-7031EA Remove install automatic transmission oil pan 02.09.2020.pdf
– AR27.10-S-7031EA Remove/install automatic transmission oil pan 02.09.2020
– Transmission 725.0 in model 447, 448
– Modification notes
– 1 Automatic transmission oil pan 5 Socket wrench 9 Bayonet coupling
– 2 Bracket 6 Overflow pipe 10 Bolts
AR27.19-D-0012TSC Remove install lift solenoid for park pawl actuator 14.07.2019.pdf
– Transmission 725.0 in model 907
– 1 Screw
– 3 Transmission
– N15/15l1 Park pawl lift solenoid
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
– 1 Remove fully integrated transmission control AR27.19-D-0200TSC
– (VGS) electric controller unit (N15/11).
– Cleanliness is essential for all work conducted on the transmission (3).Otherwise, even the smallest foreign particle in the hydraulic components of the transmission
– (3) can lead to malfunctions or a total failure of
AR27.19-D-0200TSC Remove install electrohydraulic controller unit transmission installed 06.03.2020.pdf
– AR27.19-D-0200TSC Remove/install electrohydraulic controller unit (transmission installed) 06.03.2020
– Transmission 725 in model 907
– 1 Transmission housing
– 2 Bolts
– N15/11 Fully integrated transmission
– control (VGS) electric controller unit
– 4 Transmission plug
– 4a Sealing ring
– N15/11 Fully integrated transmission control (VGS) electric controller unit
– D27.19-A001-03
AR27.19-D-0220TSC Disassemble and assemble electrohydraulic controller unit 14.07.2019.pdf
– Transmission 725 in model 907
– 2 Slide valve housing
– N15/11n4 Fully integrated transmission
– control (VGS) control unit
AR27.19-S-0200EA Remove install electrohydraulic controller unit transmission installed 20.07.2020.pdf
– AR27.19-S-0200EA Remove/install electrohydraulic controller unit (transmission installed) 20.07.2020
– Transmission 725.0 in model 447, 448
– S27.19-A000-79
– 1 Electrohydraulic controller unit 3 Bolts 4 Transmission housing
– 2 Screw
AR27.19-S-0220EA Disassemble and assemble electrohydraulic controller unit 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Screw
– 15 Fully integrated transmission control
– 16 Shift valve housing cover
AR27.20-D-0500-01TSC Remove install torque converter.pdf
– Transmission 725.0 in model 907
– Check values for torque converter
– Number Designation Transmission 725 Transmission 725
– with engine with engine
– flange to flange transmission housing
– 725 589 01 31 00 168 589 03 21 00
– 1 Position transmission vertically.
– 2 Attach assembly device (2)
AR27.40-D-0002TSC Replace torque converter housing 14.07.2019.pdf
– Transmission 725.0 (except 725.007/017) in model 907
– 1 Externally-toothed disk carrier B08
– 4 Transmission ventilation
– 5 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove
– 4 Remove transmission ventilation (4).
– Install
AR27.40-D-0003TSC Detach attach transmission housing of torque converter housing 12.02.2020.pdf
– AR27.40-D-0003TSC Detach/attach transmission housing of torque converter housing 12.02.2020
– Transmission 725.0 in model 907
– Modification notes
– 1 Transmission housing
– 4 Pipes
AR27.40-D-0205TSC Remove install radial shaft sealing ring on output flange 10.02.2020.pdf
– Transmission 725.0 in model 907
– Modification notes
AR27.40-D-0300TSC Remove install oil pump radial shaft sealing ring 14.07.2019.pdf
– Transmission 725.0 (except 725.06/09) in model 907
– Torque converter removed
– 3 Transmission firewall cover
– D27.40-A003-11
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove
– ring (2) out of transmission firewall cover (3). Do not damage the seat of the radial shaft
– sealing ring (2).
AR27.40-D-0510TSC Disassemble assemble transmission housing 14.07.2019.pdf
– AR27.40-D-0510TSC Disassemble/assemble transmission housing 14.07.2019
– Transmission 725.0 in model 907
– D27.40-A004-09
– 1 Transmission housing 4 Bearing cap
– 2 Counter stay 5 Retaining ring
– 1 Transmission housing
– 2 Counter stay
AR27.40-D-0700-02TSC Remove install heat shield on transmission.pdf
– AR27.40-D-0700-02TSC Remove/install heat shield on transmission
– Risk of injury Always wear protective gloves when working Caution caused by scraping or cutting AS00.00-Z-0017-01A
– Transmission 725.0 in model 907
– 1 Unscrew screw (1) and remove
AR27.40-S-0002EA Replace torque converter housing 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Externally-toothed disk carrier B08
– 4 Transmission housing breathing
– 5 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove
AR27.40-S-0003EA Detach attach transmission housing of torque converter housing 25.08.2020.pdf
– AR27.40-S-0003EA Detach/attach transmission housing of torque converter housing 25.08.2020
– Model 447 with transmission 725.0
– except code ZG2 (Permanent all-wheel drive)
– Model 448 with transmission 725.0
– Modification notes
– 1 Transmission housing
– 4 Oil guide pipe5 Screw
AR27.40-S-0003EB Detach attach transmission housing of torque converter housing 19.08.2020.pdf
– AR27.40-S-0003EB Detach/attach transmission housing of torque converter housing 19.08.2020
– Transmission 725.0 in model 447
– with code ZG2 (Permanent all-wheel drive)
– 1 Transmission housing
– 4 Torque converter housing ventilation
AR27.40-S-0205EA Remove install radial shaft sealing ring on output flange 25.08.2020.pdf
– Model 447 with transmission 725.0
– except code ZG2 (Permanent all-wheel drive)
– Model 448 with transmission 725.0
– Modification notes
– 2 Automatic transmission 5 Electrical wiring harness 8 Transmission mount
– 3 AdBlue® line 6 Bolts 9 Transmission mount bracket
– 4 Transmission carrier 7 Screw 10 Output flange
– 1 Radial shaft sealing ring
AR27.40-S-0206EA Remove install radial shaft sealing ring at output side 05.11.2019.pdf
– Transmission 725.0 in model 447
– with code ZG2 (Permanent all-wheel drive)
– 1 Automatic transmission
– 2 Radial shaft sealing ring
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove
AR27.40-S-0301EA Remove install oil pump radial shaft sealing ring 19.08.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Drift
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove
– 1 Remove automatic transmission. Transmission 725.0 in model 447 AR27.10-S-0005EB
– with code ZG2 (Permanent all-wheel drive)
– Transmission 725.0 in model 447 AR27.10-S-0005EA
– except code ZG2 (Permanent all-wheel drive)Transmission 725.0 in model 448
– 2 Remove torque converter. AR27.20-S-0500-01EA
AR27.40-S-0510EA Disassemble assemble transmission housing 20.07.2020.pdf
– AR27.40-S-0510EA Disassemble/assemble transmission housing 20.07.2020
– Transmission 725.0 in model 447, 448
– S27.40-A003-09
– 1 Transmission housing 5 Snap ring
– 2 Counter stay 7 Drift
– 1 Transmission housing2 Counter stay3 Internal extractor
– 6 Bearing
AR27.50-D-0550-01TSC Measuring and adjusting axial play of input.pdf
– Transmission 725.0 in model 907
– 725 589 00 31 00 168 589 03 21 00
AR27.50-D-0610TSC Remove install main components of transmission 14.07.2019.pdf
– AR27.50-D-0610TSC Remove/install main components of transmission 14.07.2019
– Transmission 725.0 in model 907
– P27.10-2546-09
– Shown on transmission 725.0 (except 725.007, 725.017, 725.047)
– 1 Transmission housing 4 Planetary gear set 4
– 2 Torque converter housing 5 Planetary gear set 3
AR27.50-D-0614TSC Remove install multidisk clutch K27 with output shaft and parking lock gear 14.07.2019.pdf
– Transmission 725.0 in model 907
– Shown on transmission 725.0 (except
– 725.007, 725.017, 725.047)
– 1 Transmission housing
– 2 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove
– 1 Remove transmission housing (1) from torque AR27.40-D-0003TSC
– converter housing (2).
AR27.50-D-0616TSC Remove install multidisk brake B05 and multidisk brake B06 14.07.2019.pdf
– Transmission 725.0 in model 907
– P27.00-2428-09
– 1 Transmission housing 5 Disk pack B06 9 L-section ring
– 2 Assembly device 6 Threaded rod 10 Disk spring
AR27.50-D-0617TSC Detach attach external plate carrier B08 on torque converter housing 14.07.2019.pdf
– Transmission 725.0 in model 907
– 2 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.50-D-0618TSC Remove install piston B08 14.07.2019.pdf
– Transmission 725.0 in model 907
– P27.50-2262-09
AR27.50-D-0619TSC Disassemble assemble multidisk clutch K27 14.07.2019.pdf
– Transmission 725.0 in model 907
– 1 K27 multiplate clutch
AR27.50-D-0622TSC Disassemble assemble multidisk clutch K81 14.07.2019.pdf
– Transmission 725.0 in model 907
– P27.50-2211-08
AR27.50-D-0623-01TSC Disassemble assemble planetary gear set 1.pdf
– Transmission 725.0 in model 907
– 000 589 52 37 00
AR27.50-D-0623-03TSC Disassemble assemble planetary gear set 3.pdf
– Transmission 725.0 in model 907
– 1 Remove planetary gear set 3 (1) from ring gear (2).
AR27.50-D-0623TSC Remove install planetary gear set 4 and planetary gear set 3 with ring gear 14.07.2019.pdf
– Transmission 725.0 in model 907
– 1 Ring gear
AR27.50-D-0624TSC Remove install planetary gear set 2 and multidisk clutch K38 with ring gear 14.07.2019.pdf
– Transmission 725.0 in model 907
– 1 Planetary gear system 2
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
AR27.50-D-0625TSC Remove install planetary gear set 1 with multidisk clutch K81 and multidisk 14.07.2019.pdf
– Transmission 725.0 in model 907
– P27.50-2208-09
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
AR27.50-P-0620-02W Removing and installing output flange.pdf
– Transmission 722.6/9, 724.2
– Transmission 725.0/1
– Automatic transmission complete
– Number Designation Transmission
– 725.0/1
– Number Designation Transmission 724.2
– BA27.10-P-1014-04G Collar nut, output flange to output shaft Nm 200
– 722.55/6/9
AR27.50-S-0550-01EA Measuring and adjusting axial play of input.pdf
– transmission
– Transmission 725.0 in model 447, 448
– 725 589 00 31 00 168 589 03 21 00
AR27.50-S-0610EA Remove install main components of transmission 20.07.2020.pdf
– AR27.50-S-0610EA Remove/install main components of transmission 20.07.2020
– Transmission 725.0 in model 447, 448
– S27.50-A011-09
– 1 Transmission housing 4 Planetary gear set 4
– 2 Torque converter housing 5 Planetary gear set 3
AR27.50-S-0614EA Remove install multidisk clutch K27 with output shaft and parking lock gear 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Transmission housing
– 2 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.50-S-0616EA Remove install multidisk brake B05 and multidisk brake B06 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– S27.50-A012-09
– 1 Transmission housing 5 Disk pack B06 9 Snap ring
– 2 Assembly device 6 Threaded rod 10 Disk spring
AR27.50-S-0617EA Detach attach external plate carrier B08 on torque converter housing 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 2 Torque converter housing
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.50-S-0618EA Remove install piston B08 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– P27.50-2262-09
AR27.50-S-0619EA Disassemble assemble multidisk clutch K27 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 K27 multiplate clutch
AR27.50-S-0622EA Disassemble assemble multidisk clutch K81 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– P27.50-2211-08
AR27.50-S-0623-01EA Disassemble assemble planetary gear set 1.pdf
– transmission
– Transmission 725.0 in model 447, 448
– 000 589 52 37 00
AR27.50-S-0623-02EA Disassemble assemble planetary gear set 2.pdf
– transmission
– Transmission 725.0 in model 447, 448
– 000 589 52 37 00
AR27.50-S-0623-03EA Disassemble assemble planetary gear set 3-.pdf
– transmission
– Transmission 725.0 in model 447, 448
– 1 Remove planetary gear set 3 (1) from ring gear (2).
AR27.50-S-0623-03EA Disassemble assemble planetary gear set 3.pdf
– transmission
– Transmission 725.0 in model 447, 448
– 1 Remove planetary gear set 3 (1) from ring gear (2).
AR27.50-S-0623-04EA Disassemble assemble planetary gear set 4.pdf
– transmission
– Transmission 725.0 in model 447, 448
– 1 Unclip axial bearing (2) from planetary gear set 4 (1).
AR27.50-S-0623EA Remove install planetary gear set 4 and planetary gear set 3 with ring gear 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Ring gear
AR27.50-S-0624EA Remove install planetary gear set 2 and multidisk clutch K38 with ring gear 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– 1 Planetary gear system 2
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove
AR27.50-S-0625EA Remove install planetary gear set 1 with multidisk clutch K81 and multidisk 20.07.2020.pdf
– Transmission 725.0 in model 447, 448
– P27.50-2208-09
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– transmission
– Remove/install
AR27.51-D-0550-04TSC Measure and adjust clearance of multidisk.pdf
– Transmission 725.0 in model 907
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1004-01E Clearance in multidisk Contact force for F1 N 600
– BE27.51-P-1005-01E Clearance in multidisk Contact force for F1 N 600
AR27.51-D-0560-03TSC Measure and adjust clearance of multidisk.pdf
– Transmission 725.0 in model 907
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1006-01E Clearance in multidisk Contact force for F1 N 1600
AR27.51-D-7230-01TSC Measure and adjust clearance of multidisk.pdf
– Transmission 725.0 in model 907
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1001-01E Clearance in multidisk Contact force for F1 N 500
– BE27.51-P-1002-01E Clearance in multidisk Contact force for F1 N 500
AR27.51-D-7230-02TSC Measure and adjust clearance of multidisk.pdf
– Transmission 725.0 in model 907
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1003-01E Clearance in multidisk Contact force for F1 N 600
AR27.51-S-0550-04EA Measure and adjust clearance of multidisk.pdf
– transmission
– Transmission 725.0 in model 447, 448
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1004-01E Clearance in multidisk Contact force for F1 N 600
– BE27.51-P-1005-01E Clearance in multidisk Contact force for F1 N 600clutch K38 clearance adjustment
AR27.51-S-0560-03EA Measure and adjust clearance of multidisk.pdf
– transmission
– Transmission 725.0 in model 447, 448
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1006-01E Clearance in multidisk Contact force for F1 N 1600
AR27.51-S-7230-02EA Measure and adjust clearance of multidisk.pdf
– transmission
– Transmission 725.0 in model 447, 448
– Adjustment values for multidisk clutch/multidisk brake
– Number Designation Transmission 725.0
– BE27.51-P-1003-01E Clearance in multidisk Contact force for F1 N 600
AR27.55-D-0610TSC Remove install oil cooling system feed line 02.12.2019.pdf
– Transmission 725.0 in model 907 with engine 274
– D27.55-A007-08
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
AR27.55-D-0610TSM Remove install oil cooling system feed line 06.03.2020.pdf
– Transmission 725.0 in model 907.1/2/6 with engine 654.9
– 1 Oil cooling feed line
– 7 Automatic transmission fluid cooler
– D27.55-A013-76
– 8 Automatic transmission
– D27.55-A014-76
AR27.55-D-0611TSC Remove install oil cooling system return line 02.12.2019.pdf
– Transmission 725.0 in model 907 with engine 274
– D27.55-A008-08
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
AR27.55-D-0611TSM Remove install oil cooling system return line 06.03.2020.pdf
– Transmission 725.0 in model 907.1/2/6 with engine 654.9
– 1 Oil cooling feed line
– 7 Automatic transmission fluid cooler
– D27.55-A013-76
– 8 Automatic transmission
– D27.55-A014-76
AR27.55-D-1000TSM Remove install automatic transmission fluid cooler 10.02.2020.pdf
– AR27.55-D-1000TSM Remove/install automatic transmission fluid cooler 10.02.2020
– Transmission 725.0 in model 907.1/2/6 with engine 654.9
– 1 Automatic transmission fluid cooler
– 2 Screw
– 4 Transmission oil lines
– 5 Coolant hoses
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.55-S-0600EA Remove install oil lines of oil cooling for automatic transmission 02.09.2020.pdf
– AR27.55-S-0600EA Remove/install oil lines of oil cooling for automatic transmission 02.09.2020
– Transmission 725.0 in model 447 with engine 654.9
– S27.55-A001-79
– 1r Return flow pipe 2 Automatic transmission oil pan 4 Torque converter housing
– 1v Feed line 3 Automatic transmission fluid cooler
– Risk of injury Wear protective gloves, protective clothing Caution to skin and eyes due to AS00.40-Z-0001-01A
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.55-S-0600EG Remove install oil lines of oil cooling for automatic transmission 02.09.2020.pdf
– AR27.55-S-0600EG Remove/install oil lines of oil cooling for automatic transmission 02.09.2020
– Transmission 725.0 in model 447 with engine 274
– Transmission 725.0 in model 448
– 1r Return flow pipe
– 2 Automatic transmission fluid cooler
– 3 Automatic transmission4 Holder
– 5 Screw
– 8 Electrical connector
AR27.55-S-1000EA Remove install automatic transmission fluid cooler 02.09.2020.pdf
– AR27.55-S-1000EA Remove/install automatic transmission fluid cooler 02.09.2020
– Transmission 725.0 in model 447 with engine 654.9
– S27.55-A000-79
– 1 Automatic transmission fluid cooler 3 Transmission oil lines 5 Bolts
– 2 Automatic transmission oil pan 4 Coolant hoses
– Risk of injury Wear protective gloves, protective clothing Caution to skin and eyes due to AS00.40-Z-0001-01A
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR27.55-S-1000EG Remove install automatic transmission fluid cooler 02.09.2020.pdf
– AR27.55-S-1000EG Remove/install automatic transmission fluid cooler 02.09.2020
– Transmission 725.0 in model 447 with engine 274
– Transmission 725.0 in model 448
– S27.55-A004-79
– 1 Automatic transmission fluid cooler 3 Left air duct segment 5 Screw
– 2 Oil lines 4 Holder 6 Electrical connector
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
AR27.57-D-0652TSC Remove install automatic transmission auxiliary oil pump 18.07.2019.pdf
– AR27.57-D-0652TSC Remove/install automatic transmission auxiliary oil pump 18.07.2019
– Transmission 725.0 in model 907
– 2 Bolts
– N15/11 Fully integrated transmission
– control (VGS) electric controller unit
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
– 1 Remove fully integrated transmission control AR27.19-D-0200TSC
– (VGS) electric controller unit (N15/11).
AR27.57-S-0652EA Remove install automatic transmission auxiliary oil pump 20.07.2020.pdf
– AR27.57-S-0652EA Remove/install automatic transmission auxiliary oil pump 20.07.2020
– Transmission 725.0 in model 447, 448
– 1 Automatic transmission auxiliary oil
– pump
AR27.60-D-0950TSC Remove install park pawl mechanism 12.02.2020.pdf
– Transmission 725.0 in model 907
– 1 Transmission housing
– 83 Park detent
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– Notes on automatic transmission AH27.19-P-0001-01NKB
– Remove/install
AR27.60-S-0950EA Remove install park pawl mechanism 25.08.2020.pdf
– Transmission 725.0 in model 447, 448
– Modification notes
– Shown on transmission 725.0 except code
– ZG2 (Permanent all-wheel drive)
– 1 Transmission housing
– 83 Park detent
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR28.10-S-0100EA Remove install transfer case 06.03.2020.pdf
– Model 447 with transmission 725.0
– with code ZG2 (Permanent all-wheel drive)
– 5 Transmission
– 6 Bolts (10 pcs.)
– transmission
– Remove/install
BB00.40-P-0231-00A General gear oils.pdf
– application into: Frequently the transmission oils fulfill multifunctional requirements,
– Hypoid gear oils, sheet 235.0/.6/.7/.8/.15/.16/.20/.31/.61/.62 which is why they are used in a wide variety of transmission desi gns
– and hydraulic systems. However, where very specific technological Transmission oils, sheet 235.1/.3/.4/.5/.10/.11/.12/.13/.27/.28/.29/.41/
– properties of the transmission oil are required, special transmission oils .71/.72/.73/.74, 236.24
– had to be formulated for these major assemblies. These are listed on Transmission fluids (ATF), sheet 236.1/.2/.3/.6/.7/.8/.9/.10/.11/.12/.13/
– separate sheets of the MB Specifications for Operating Fluids and .14/15/.17./.20/.21/.22/.24/.25/.26/.41/.81/.91, 238.22, 239.21
– explain the large number of sheets for transmission oils.
– The Mercedes-Benz standard for the corresponding lubricant quality
BB00.40-P-0231-02A Specified transmission oils commercial.pdf
– BB00.40-P-0231-02A Specified transmission oils (commercial
– vehicle, van) – Overview
BB00.40-P-0236-15A Automatic transmission fluids ATF Use in vehicles major assemblies see.pdf
– BB00.40-P-0236-15A Automatic transmission fluids (ATF) Use in vehicles/major assemblies, see
– (specification 236.15)
– Service Information bulletin: Specifications for Transmission 722.9 SI00.40-S-0014A
– Operating Fluids for automatic transmission
– Service Information bulletin: Specifications for Transmission 722.9 SI00.40-P-0014A
– Operating Fluids for automatic transmission Transmission 724.2
– Transmission 722.9
– Transmission 724.2
– Transmission 725.0 in model 205, 213, 217, 218, 222, 238, 253, 257, 290
– Only for transfer case
BB00.40-P-0236-17A Automatic transmission fluids ATF.pdf
– BB00.40-P-0236-17A Automatic transmission fluids (ATF)
– (specification 236.17)
– Service Information bulletin: Specifications for Transmission 725.0/1 SI00.40-P-0014A
– Operating Fluids for automatic transmission
– Transmission 725.0
– not for transfer case
Should be used BB00.40-P-0231-01A Specified gear oils cars cross-country.pdf
– Automated manual transmission 717.4 in model 450, 452
– Automated manual transmission 717.4 in model 451, 454
– DCT (Twinamic) 700.410/411 in model 453
– Manual transmission 700.120/121/122/123 in model 453
– Passenger car, sheets 235.0 to 235.74
SI00.40-P-0014A Service Information bulletin Specifications for Operating Fluids for automatic 06.12.2018.pdf
– transmission
– Transmission 722.6/9, 724.2, 725.0/1
– Modification notes
– 7-speed automatic transmission 724.2 We hereby inform you about current changes to the Specifications
– Only transmission oil as per Specifications for Operating Fluids Sheet for Operating Fluids:
– 236.15 5-speed automatic transmission 722.6: may now be used.
– 9-speed automatic transmission 725.0/1 Only transmission oil as per Specifications for Operating Fluids Sheet
– Only transmission oil as per Specifications for Operating Fluids Sheet 236.14 may be used.
– 236.17 7-speed automatic transmission 722.9 except codeA89 may now be used!
– Exception: Only transmission oil as per Specifications for Operating Fluids sheet
– Transmission 722.6 may not be filled with FE-ATF 134 236.14 may be used. and ATF D97 .
– 7-speed automatic transmission 722.9 with codeA89
– Only transmission oil as per Specifications for Operating Fluids Sheet
– 236.15 may now be used.
– to ensure that 7-speed automatic transmission 722.9 is filled correctly. 236.17)
– because these oils must never be mixed with other oils. The diagnostics system displays a message referring to the specified
– transmission oil before reading out the transmission oil temperature. Exception:
– Transmission 722.9 can be identified by the differently shaped oil pan Transmission 722.6/9, the associated electrohydraulic controller units
– (see picture 1 and picture 2 ). and torque converters, which are available as a replacement part, are
WS27.00-P-0188B 000 588 09 19 00 Oil level sensor 18.03.2020.pdf
– Transmission 724.1, 725
– Use in FG 27/Set B/C
– Oil level sensor for checking transmission oil level using ultrasound.Test equipment category CAT_B
– Procurement information: