Service manual Mercedes 710 Transmission

AP26.00-A-2601A Manual transmission – oil change 14.12.2016.pdf
– AP26.00-A-2601A Manual transmission – oil change 14.12.2016
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 1 Conduct test drive to heat up gear oil, and Only drain transmission oil when
– park vehicle on a level surface transmission is at operating temperature.
– 2 Clean area around oil filler screw (1) and drain
– 6 Pour in transmission oil up to bottom edge of *BF26.00-N-1001-01A Gear oil
– oil filler opening.
AP26.00-B-2601I Manual transmission – oil change 03.02.2020.pdf
– AP26.00-B-2601I Manual transmission – oil change 03.02.2020
– Transmission 710.264/265/266/267
– Transmission 710.264/266
– Transmission 710.271/273/274, 713.70/74/78/80/82
– Transmission 710.272/273, 712.132/31/360/361/363/364, 713.70/74/80/82
– Transmission 712.362/44/451/452, 713.59/70/74/75/78/82 in model 384, 386, 682, 693
– Transmission 712.612/622 in model 384
– Transmission 712.623/632, 715.06
– Transmission 713.59/70/82Transmission 715.054 in model 382, 384, 684
– Transmission 718.07/08/26/69
– Transmission 718.07/19/54/69/73/79
– Transmission 718.19
– Transmission 718.25/54/63/69/73/77/85
– Transmission 718.380/382/383/384
– Transmission 719.690 in model 386
– Modification notes
AP26.00-D-2601A Manual transmission – oil change 25.02.2019.pdf
– AP26.00-D-2601A Manual transmission – oil change 25.02.2019
– Model 636 with transmission 716.65
– Model 638
– except code G40 (Automatic transmission)
– Model 639 with transmission 716.6
– except code MA0 (E-CELL 60 kW)
– Model 667 with transmission 711.11/13/61
– Model 668 with transmission 710.6, 712.21/613/621, 715.00/02/05
– Model 670 with transmission 710.6/84, 711.61, 712.21/613/621, 714.08/50, 715.00/02/05Model 690.6 with transmission 711.620
– Model 901, 902, 903, 904 with transmission 711.60/61
– Model 901, 902, 903, 904, 905 with transmission 711.62
– Modification notes
– Transmission in model 638
– Transmission 716 in model 636, 639
– N26.00-2319-01 S26.00-4500-01
– Transmission 711, 712, 715 (example)
– Transmission 710 (S5-42)
– N26.00-2268-01 N26.00-0286-01
AP26.00-W-2601K Manual transmission – oil change 06.04.2017.pdf
– AP26.00-W-2601K Manual transmission – oil change 06.04.2017
– Transmission 710.580/581/582 in model 967
– Transmission 712.614 in model 967
– Transmission 712.671/682 in model 967
– Transmission 715.058/066 in model 967
– Transmission 715.310 in model 967
– Transmission 715.571 in model 967
– Modification notes
– 21.02.2017 Gear oil Transmission 710.580/581/582 BF26.00-N-1001-01M
– Shown on transmission 715.066
– 1 Drain screw
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– 1 Remove bottom cover for transmission
– 2 Clean area around oil filler screw (2) and drain
AR25.10-S-0050SD Remove install clutch 19.10.2017.pdf
– Engine 271.951 in model 906 with transmission 711.651
– Engine 642.896 in model 906 with transmission 711.685
– Engine 642.992 in model 906 with transmission 711.660
– Engine 646 in model 636 with transmission 716.6
– Engine 646 in model 639 with transmission 716.6
– Engine 646.984/985/986/989/990 in model 906 with transmission 711.651/660
– Engine 651 in model 636, 639 with transmission 711.6
– Engine 651.955 in model 900 with transmission 711.680Engine 651.955 in model 906.133/135/153/155/631/633/635/655/657 with transmission 710.510
– with code ZL3 (National version for Latin America)
– Engine 651.955/956/957 in model 906 with transmission 711.680
– Engine 651.956 in model 906.133/631/633/635 with transmission 710.510
AR25.20-D-0180SD Remove install central clutch operator 14.12.2016.pdf
– Model 900 with engine 651.955 with transmission 711.680
– Model 906 with engine 271.951, 646.984/985/986/989/990 with transmission 711.651
– Model 906 with engine 642 with transmission 711.685
– Model 906 with engine 642.992, 646.984/985/986/989/990 with transmission 711.660
– Model 906 with engine 651 with transmission 711.680
– Model 906.133/135/153/155/631/633/635/655/657 with engine 651.955 with transmission 710.510
– with code ZL3 (National version for Latin America)
– Model 906.133/631/633/635 with engine 651.956 with transmission 710.510
– Shown on transmission 711.660
– 1 Screw
– 3 Transmission
– D25.20-1109-12
AR26.10-A-0036ZFE Fasten transmission on assembly stand 14.12.2016.pdf
– AR26.10-A-0036ZFE Fasten transmission on assembly stand 14.12.2016
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 1 Transmission
– 2 Support fixture
– 1 Remove the transmission (1) AR26.10-D-0020H
– 2 Fasten support fixture (2) to assembly stand
AR26.10-D-0020H Remove install transmission 06.03.2020.pdf
– AR26.10-D-0020H Remove/install transmission 06.03.2020
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906
– Modification notes
– Shown on transmission 711.680
– 1 Transmission
– 2 Support plate
AR26.10-S-0020E Remove install transmission 09.01.2020.pdf
– AR26.10-S-0020E Remove/install transmission 09.01.2020
– Model 447 with engine 651 with transmission 711.6
– Modification notes
– 08.01.2020 Bolt, speed sensor for tachograph to transmission Transmission 711.680/683/685 BA26.19-N-1001-01I
– S26.10-4517-09
– 1 Bracket 3 Electrical connector 5 Transmission
– 2 Shift cable 4 Hydraulic line W11/1 Engine ground point
– B6/34 Manual transmission speed Hall sensor
– S26.10-4516-01
AR26.10-S-0020EG Remove install transmission 20.5.15.pdf
– AR26.10-S-0020EG Remove/install transmission 20.5.15
– Model 447 with engine 274 with transmission 710.5
– S26.10-4527-09
– 1 Bracket 3 Transmission 5 Securing clamp
– 2 Shift cable 4 Hydraulic line W11/1 Engine ground point
AR26.10-S-0036EG Fasten transmission on assembly stand 27.5.15.pdf
– AR26.10-S-0036EG Fasten transmission on assembly stand 27.5.15
– Model 447 with transmission 710.5
– 1 Transmission
– 2 Support fixture
– 1 Remove transmission (1) AR26.10-S-0020EG
– Attach, remove
AR26.19-A-0004C Remove install neutral position switch 14.12.2016.pdf
– Model 906.133/135/153/155/631/633/635/655/657 with transmission 710.510
– with code ZL3 (National version for Latin America)
– 1.1 Raise vehicle Transmission installed
– AR00.60-D-1000H
– 1.2 Attach transmission to assembly stand Transmission removed
– AR26.10-A-0036ZFE
AR26.30-A-6500ZFE Remove install shift cover 14.12.2016.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 12 Rear section of transmission housing
– A26.30-0002-05
– 1 Remove shift cables at transmission AR26.60-D-6626-01B
– 2 Remove gearshift linkage AR26.60-A-0004C
– transmission housing (12) shift cover (1).
– 4 Remove selector shaft (4)
AR26.30-A-6510ZFE Disassemble assemble shift cover 14.12.2016.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 12 Rear section of transmission housing
– A26.30-0002-05
AR26.30-S-6510-02EG Assembling shift cover.pdf
– Model 447 with transmission 710.5
– Cover
– Number Designation Transmission 710.5
– in model 447
AR26.30-S-6510EG Disassemble assemble shift cover 23.11.2016.pdf
– Model 447 with transmission 710.5
– 1 Shift cover
AR26.40-A-2470ZFE Remove and install front section of transmission housing 10.03.2020.pdf
– AR26.40-A-2470ZFE Remove and install front section of transmission housing 10.03.2020
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 10 Front section of transmission housing
– 12 Rear section of transmission housing
– A26.40-0009-06
– 3 Remove front transmission cover AR26.30-A-0230C
– 4 Detach transmission housing front section (10) AR26.40-A-2470-01ZFE
– *055589024300 Removal and installation tool
– transmission housing rear section (12)
– 7 Remove main shaft ball bearing from AR26.40-A-2471ZFE
– transmission housing front section (10)
– Install
– 8 Install main shaft ball bearing in transmission AR26.40-A-2471ZFE
– housing front section (10)
AR26.40-A-2471ZFE Disassemble assemble front section of transmission housing 14.12.2016.pdf
– AR26.40-A-2471ZFE Disassemble/assemble front section of transmission housing 14.12.2016
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 10 Front section of transmission housing
– 10a Main shaft ball bearing
– 1 Remove transmission housing front section AR26.40-A-2470ZFE
– (10)
– transmission housing front section (10)
– 6 Remove ball socket (10c) from transmission
– housing front section (10) using suitable
AR26.40-A-2475-03C Remove install output flange.pdf
– Model 906.133/135/153/155/631/633/635/655/657 with transmission 710.510
– with code ZL3 (National version for Latin America)
– Number Designation Transmission
– 710.510
AR26.40-A-2476ZFE Disassemble assemble rear section of transmission housing 14.12.2016.pdf
– AR26.40-A-2476ZFE Disassemble/assemble rear section of transmission housing 14.12.2016
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 10 Locking bush11 Rear section of transmission housing
– 16 Retaining ring
AR26.40-A-3840C Remove install output shaft radial shaft sealing ring 04.06.2018.pdf
– Model 906.133/135/153/155/631/633/635/655/657 with transmission 710.510
– with code ZL3 (National version for Latin America)
– 1.1 Raise vehicle With installed transmission
– AR00.60-D-1000H
– 1.2 Attach transmission to assembly stand For a removed transmission
– AR26.10-A-0036ZFE
– 2 Remove check strap of propeller shaft Only with transmission installed.
– AR41.10-D-0050-16A
– 3 Detach drive shaft from transmission and Only with transmission installed.
– fasten at side on substructure
AR26.40-S-0345EG Remove install central clutch operator 19.5.15.pdf
– Model 447 with transmission 710.5
– 1 Central clutch release bearing
– 1 Remove transmission AR26.10-S-0020EG
– 2 Remove bolts (2) *BA26.40-N-1003-01Q Bolt, central clutch releasing bearing to
– transmission
– 3 Remove central clutch release bearing (1)
AR26.40-S-2470EG Remove and install front section of transmission housing 06.03.2020.pdf
– AR26.40-S-2470EG Remove and install front section of transmission housing 06.03.2020
– Model 447 with transmission 710.5
– 10 Front section of transmission housing
– 12 Rear section of transmission housing
– A26.40-0009-06
– 3 Remove front transmission cover AR26.30-S-0230EG
– 4 Detach transmission housing front section (10) AR26.40-S-2470-01EG
– *055589024300 Removal and installation tool
– transmission housing rear section (12)
– 7 Remove main shaft ball bearing from AR26.40-S-2471EG
– transmission housing front section (10)
– Install
– 8 Install main shaft ball bearing in transmission AR26.40-S-2471EG
– housing front section (10)
AR26.40-S-2475-03EG Remove install output flange.pdf
– Model 447 with transmission 710.5
– Gear set, shafts
– Number Designation Transmission 710.5
– in model 447
AR26.40-S-2476EG Disassemble assemble rear section of transmission housing 18.6.15.pdf
– AR26.40-S-2476EG Disassemble/assemble rear section of transmission housing 18.6.15
– Model 447 with transmission 710.5
– 2 Ball sleeve
– 11 Rear section of transmission housing
– 16 Retaining ring
– 7 Remove ball bearing (9) from transmission
– housing rear section (11) using suitable drift Do not use a metal drift.
AR26.40-S-3841EG Remove install radial shaft sealing ring at output side 13.5.15.pdf
– Model 447 with transmission 710.5
– 1 Radial shaft sealing ring
– from transmission
– *BA41.10-N-1001-01H Bolt, drive shaft to flexible coupling on
– transmission
– *BA41.10-N-1003-01H Bolt, propeller shaft center support
– *BA41.10-N-1004-01H Bolt, flexible coupling to transmission
– Risk of injury . Skin or eye injuries may result Wear protective gloves, protective clothing AS00.00-Z-0002-01A Danger !
AR26.50-A-0002ZFE Remove install main shaft and countershaft with shift unit 14.12.2016.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– 12 Rear section of transmission housing
– A26.50-0003-11
– 3 Remove front section of transmission AR26.40-A-2470ZFE
– housing
– 5 Detach transmission housing rear section AR26.50-A-0002-03ZFE
– (12) from gear set
– transmission housing rear section (12)
– Check
AR26.50-A-0420ZFE Disassemble and assemble main shaft 14.12.2016.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
AR26.50-A-4775ZFE Disassemble assemble countershaft 14.12.2016.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
AR26.50-I-2001A Remove install and adjust main shaft and countershaft 15.8.11.pdf
– TRANSMISSION 712.351 in MODEL 397, 684
– N26.50-2047-09
– 4 Spacer plate 17 Transmission rear end cover 29 Bolt
– 5 Shift housing gasket 18 Reverse gear 30 Outer bearing race of input shaft
– 24 Washer 12 Transmission housing
– 25 Bolt 13 Main shaft
– 1 Remove transmission housing (12) AR26.40-I-2001A
– 2 Remove main shaft (13), shift rods, and AR26.50-I-2002-03A
AR26.50-I-2002-02A Install main shaft with shift rails and.pdf
– countershaft in rear section of transmission housing
– Inspection data of cover
– Number Designation Transmission
– 712.351
– BE26.30-N-1001-01B Installation depth of radial sealing ring in mm 7…8rear transmission cover
– Cover
– BA26.30-N-1008-01E Bolt for gear lock on rear transmission cover M6 Nm 10
– Gear set, shafts
AR26.50-I-4775-01A Determine shim for countershaft.pdf
– Number Designation Transmission
– 712.351
– BE26.40-N-1001-01A Shims, transmission housing bearing cap mm 0.02…0.09
– Cover
– BA26.30-N-1007-01E Bolt, rear transmission cover to transmission M8 Nm 23housing
– 710 589 02 63 00 710 589 00 21 00 710 589 01 63 00
– 1 Insert transmission housing (2) vertically from above into rear transmission cover (3).
– Output flange (4) faces downwards.
AR26.50-S-2002-01EG Remove install reverse idler shaft with reverse.pdf
– Model 447 with transmission 710.5
– Gear set, shafts
– Number Designation Transmission 710.5
– in model 447
– BA26.50-N-1002-01O Screw/bolt, reverse idler shaft to transmission housing Nm 23
– Remove
AR26.60-A-0004C Remove install gearshift linkage 14.12.2016.pdf
– Model 906.133/135/153/155/631/633/635/655/657 with transmission 710.510
– with code ZL3 (National version for Latin America)
– 1.1 Raise vehicle With installed transmission
– AR00.60-D-1000H
– 1.2 Fasten transmission on assembly stand For a removed transmission
– AR26.10-A-0036ZFE
– 2 Detach ball heads of shift cables from Only when the transmission is installed.
– transmission
– Installation: Grease ball heads.
AR26.60-D-6610-01A Detach attach switching unit.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990
– Transmission 711.660 in model 906.1/2/6/7 with engine 642.992, 646.985/986/989/990
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906
– Shift
– Number Designation Transmission Transmission
– 710.510 711.651
AR26.60-D-6610B Remove install shift device 07.08.2018.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990
– Transmission 711.660 in model 906.1/2/6/7 with engine 642.992, 646.985/986/989/990
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906
– 1 Shift gate
AR26.60-D-6626-01B Detach attach shift cables at transmission.pdf
– AR26.60-D-6626-01B Detach/attach shift cables at transmission
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906 with engine 642.992
– Transmission 711.685 in model 906 with engine 642.993
– Repair materials
AR26.60-D-6626-02A Detach attach shift cables at switching unit.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990
– Transmission 711.660 in model 906.1/2/6/7 with engine 642.992, 646.985/986/989/990
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906
– Repair materials
AR26.60-D-6626B Remove install shift cables 07.08.2018.pdf
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990
– Transmission 711.660 in model 906.1/2/6/7 with engine 642.992, 646.985/986/989/990
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906
– 1 Shift gate
– 2 Transmission
– 3 Shift cables
AR26.60-D-6633B Adjust shift cables for manual transmission 14.12.2016.pdf
– AR26.60-D-6633B Adjust shift cables for manual transmission 14.12.2016
– Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657
– with code ZL3 (National version for Latin America)
– Transmission 711.680 in model 900
– Transmission 711.680 in model 906
– Transmission 711.685 in model 906
– D26.60-1209-09
– 2 Transmission 5 Zero position catch
– 3 Shift lever boot 6 Sliding piece
– 1 Shift transmission to neutral
– 2 Unclip shift lever boot (3) and slide upward at
AR43.30-W-0002HV Remove install retarder 30.11.11.pdf
BB00.40-P-0231-02A Specified transmission oils commercial.pdf
– BB00.40-P-0231-02A Specified transmission oils (commercial
– vehicle, van) – Overview