Service manual Mercedes 715 Transmission | Up to 2020 incl.

Remove/install clutch pedal switch Model 900 with transmission 711 Model 906 with transmission 710, 711, 715, 716
Remove/install pedal bracket of clutch pedal Model 900 with transmission 711 Model 906 with transmission 710, 711, 715, 716
Remove/install hydraulic pump TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123 TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Determine shim for drive shaft Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission-independent power take-off (live PTO) Transmission 715.371/381/523 with code N4X …
Remove/install roller bearing of drive shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Remove/install disks of countershaft brake (VGW-B) Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G …
Remove/install hydraulic pump Manual transmission 715.372, 715.504, 715.517, 715.527, 715.531, 715.567, 715.568, 715.576Manual transmission 715.563 with Vehicle 693Manual transmission 715.565 with Vehicle 693
Assemble transmission Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Disassemble/assemble power take-off 2 TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123
Determine shim for countershaft Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C …
Transmission oils (specification 235.16) Transmission 715.352/356/360/366/371/376/381/386
Inspecting gearshift system adjusting TRANSMISSION 715.508 in MODEL 964 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 in MODEL 964 with CODE G1I (Transmission G 231-16/17.0-1.0) …
Remove main shaft and countershaft with shift unit Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.537/538 in model 800
Removing and installing main shutoff valve TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install splitter box cylinder Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/install main shaft rpm sensor Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install radial shaft sealing ring on output flange Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Manual transmission – oil change Transmission 715.3 in model 956
Install front section of transmission housing Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Install front section of transmission housing TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) without CODE N4X (Live PTO, partly …
Remove/install planetary gears Transmission 715.350/370/380/500/507/510/513/515/517/520/525/527/540/561/567/568/570/576
Remove/install main shaft rpm sensor 24.04.2015 Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Remove/install transmission downwards Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Except for vehicles with 4 axles …
Remove/install power take-off (live power take-off) Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) …
Remove/install shift module Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 in model 964 with code …
Disassemble transmission main shaft TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Disassemble/assemble power take-off 2 output shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Determine shims of drive shaft and countershaft Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C …
Manual transmission – oil change Transmission 715.520 in model 930, 932, 934 with code G02 (Torque converter clutch (WSK)) Transmission 715.520 in model 950, 952, 953, 954 with code G02 (Torque converter clutch (WSK))
Remove/install input shaft bearing cap 06.06.2018 Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69)
Manual transmission – oil change Transmission 715.310/352/360/371/381/508/518/523/528/571 in model 964 Transmission 715.310/352/360/371/381/523 in model 963
Remove/install shift force assist solenoid valve TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install neutral position switch TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install splitter box cylinder Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G …
Dismantle assemble drive shaft. TRANSMISSION 715.523 with CODE G2D (Transmission G 280-16/11.7-0.69)
Disassemble/assemble power take-off 2 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Remove/install bearing inner race Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Assemble transmission Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77)
Remove/install transmission output flange Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.508 with code G1H …
Remove/install transmission output flange Transmission 715.571 with code G1F (Transmission G 141-9/14.57-1.0)
Manual transmission – oil change Transmission 715.570 in model 949.0
Remove/install radial shaft sealing ring on output flange Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Dismantle assemble drive shaft. Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77)
Disassemble/assemble gearshift system TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install power take-off drive shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 131
Assembling range group TRANSMISSION 715.570/ 576
Removing and installing range group shift piston 04.03.2019 Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69)
Install main shaft and countershaft with shift unit Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.537/538 in model 800
Remove/install countershaft speed sensor Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E …
Remove/install transmission output flange Transmission 715.351/372/382/388/527/531 in model 958.4 Transmission 715.504 in model 696 Transmission 715.517/535/567/568 in model 958.2 Transmission 715.563/565 in model 693
Check/correct transmission oil level TRANSMISSION 715.320 /350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 except CODE (G02) Torque converter clutch (WSK)
Remove/install reverse gear switch TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/disassemble range group TRANSMISSION 715.350 with CODE (GE3) Mercedes PowerShift TRANSMISSION 715.350 with CODE (GE7) Mercedes PowerShift 2
Attaching and detaching mounting device on transmission Transmission 715.3/5
Remove/install bearing cap of power take-off (NMV) hollow shaft Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
Remove/install hydraulic pump TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121
Remove/install shift cylinder with solenoid valve at power take-off 1 Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Remove/install transmission output flange Manual transmission 715.575 with Vehicle 958.0, 958.1Manual transmission 715.576 with Vehicle 958.0, 958.2
Determine shim for oil pump Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366/537/538/539 in model …
Remove/install bearing housing output TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121-1b
Disassemble/assemble power take-off drive shaft TRANSMISSION 715 with power take-off 125 and drive shaft with cylindrical roller bearing
Disassemble/assemble planetary gear set with shift mechanism Transmission 715.570/576
Removing and installing range group shift piston 04.03.2019 Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Remove/install shift cylinder with solenoid valve at power take-off 2 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Assembly mandrel for planet gear TRANSMISSION 715.3 TRANSMISSION 715.5 (except 715.570/571/576)
Disassemble transmission main shaft Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install oil pump and pressure relief valve TRANSMISSION 715.352 with CODE G2B (Transmission G 211-12/14.93-1.0) TRANSMISSION 715.360 with CODE G2C (Transmission G 230-12/11.7-0.78) TRANSMISSION 715.371 with …
Remove/install PTO Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-10b
Install main shaft and countershaft with shift unit Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366 in model 800
Assembling range group TRANSMISSION 715.350 with CODE (GE3) Mercedes PowerShift TRANSMISSION 715.350 with CODE (GE7) Mercedes PowerShift 2
Remove/install transmission output flange TRANSMISSION 715.570/576
Assemble power take-off TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123
Remove/install oil pump and pressure relief valve TRANSMISSION 715.570/ 576
Shift power take-off (NMV) manually TRANSMISSION 715 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715 with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
Detach front section of transmission housing TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) without CODE N4X (Live PTO, partly …
Remove/install power take-off Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 125
Disassemble power take-off TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Disassemble power take-off Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121-1b
Remove/install radial shaft sealing ring at output side TRANSMISSION 715.571 with CODE G1F (Transmission G 141-9/14.57-1.0)
Install front section of transmission housing Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366 in model 800
Remove/install range group shift cylinder TRANSMISSION 715.500 /507 /510 /513 /520 /540 with CODE (GS2) Gear control
Determine shim for oil pump TRANSMISSION 715.570 /576
Rear end cover modified TRANSMISSION 715.5## ## as of 0224564
Disassemble transmission Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77)
Sensor unit removal and installation TRANSMISSION 715.508 in MODEL 964 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 in MODEL 964 with CODE G1I (Transmission G 231-16/17.0-1.0) …
Assembling transmission main shaft Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/install power take-off shift fork TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121
Remove/install rapid exhaust valve of countershaft brake (VGW-B) Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371 in model 963, …
Manual transmission – oil change Transmission 710.580/581/582 in model 967 Transmission 712.614 in model 967 Transmission 712.671/682 in model 967 Transmission 715.058/066 in model 967 Transmission 715.310 in …
Disassemble power take-off Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121-2b, 121-2c
Adjust locking bar for interlock Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/install power take-off 1 indicator switch TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121 TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123 …
Adapter for removing guide bush in front section of transmission housing Model 000.001, 374.6, 375.3/4, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958.2/4 with transmission 715.5 Model 000.001, 375.3, 930, 934, 950, 952, 953, 954 with …
Remove/install shift cylinder with solenoid valve at power take-off 2 TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Determine shim for shift cylinder of splitter group Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69) Transmission 715.537/538/539 in model 800
Remove/install transmission control unit (TCM) 25.10.2019 Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69)
Remove/install power take-off Transmission 715.310 with power take-off 123 Transmission 715.310 with power take-off 124
Manual transmission – oil change Transmission 712.612 in model 685, 688 Transmission 712.612 in model 688 Transmission 712.62/63 Transmission 712.622/631 in model 368 Transmission 715.3 in model 934, 938, 958 …
Dismantle assemble drive shaft. Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove main shaft and countershaft with shift unit Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69) Transmission 715.539 in model 800
Remove/install radial shaft seal and pilot bushing for range group shift rod TRANSMISSION 715.570/ 576
Attach/detach engine support fixture Model 963, 964 with engine 460.9 with transmission 715.352 Model 963, 964 with engine 460.9 with transmission 715.360 Model 963, 964 with engine 460.9 with transmission 715.371 Model …
Determine shim for drive shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 131
Remove/install transmission downwards Transmission 715.352 in model 956 with engine 936.9 with code G2B (Transmission G 211-12/14.93-1.0)
Remove and install gearshift system TRANSMISSION 715.571 with CODE G1F (Transmission G 141-9/14.57-1.0)
Disassemble/assemble range group Transmission 715.571 with code G1F (Transmission G 141-9/14.57-1.0)
Dismantle assemble drive shaft. TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install range group shift cylinder TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 /561 /567 /568 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.500 /507 /510 /513 /520 /540 /561 with CODE (GS3) …
Determine shim for output shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Remove/install shift cylinder with solenoid valve at power take-off 2 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Disassemble transmission main shaft TRANSMISSION 715.523 with CODE G2D (Transmission G 280-16/11.7-0.69)
Remove/install shift cylinder with solenoid valve at power take-off 1 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Disassemble power take-off (live power take-off) TRANSMISSION 715.371/381/523 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371/381/523 with CODE N4X (Live PTO, partly clutch-dependent, MB, …
Remove/install rear end cover 06.03.2019 Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69) Transmission 715.571 with code G1F (Transmission G 141-9/14.57-1.0)
Remove/install range group shift cylinder TRANSMISSION 715.570/ 576
Remove/install power take-off (NMV) shift fork and sliding sleeve Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371 in model 963, …
Remove/install housing cover at output end TRANSMISSION 715.370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Remove/install range group Transmission 715.571 with code G1F (Transmission G 141-9/14.57-1.0)
Remove/install power take-off Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 121
Remove/install PTO Transmission 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Remove/install radial shaft seal and pilot bushing for range group shift rod TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Assemble power take-off Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Remove/install PTO Manual transmission 715.3, 715.5 with CODE N04 (PTO, layshaft MB, 1b)Manual transmission 715.3, 715.5 with CODE N07 (PTO, layshaft MB, 2b)Manual transmission 715.3, 715.5 with …
Disassemble/assemble shift housing of second output Manual transmission 715.5 with CODE NB0 (PTO MB 123-10b, flange, low-speed) with CODE ND0 (PTO MB 124-10b, flange, low-speed)
Disassemble/assemble bearing housing output Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 131
Remove/install power take-off 2 indicator switch TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123 TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124 …
Remove/install shift cylinder with solenoid valve at power take-off 1 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Assembling transmission main shaft Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Disassemble/assemble power take-off drive shaft TRANSMISSION 715 with power take-off 125 and drive shaft with ball bearing
Remove/install power take-off 2 TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Disassemble/assemble gearshift hub Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Check/correct transmission oil level Transmission 715.5 in model 930, 932, 934 with engine 541.9 with code G02 (Torque converter clutch (WSK)) Transmission 715.5 in model 930, 932, 934 with engine 542.9 with code G02 …
Disassemble transmission Transmission 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69)
Remove/install shift cylinder with solenoid valve at power take-off 1 TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Remove/install bearing inner race Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Remove/install planetary gears Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366/537/538/539 in model …
Determine shim size for intermediate gear shaft TRANSMISSION 715.371/381/523 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371/381/523 with CODE N4X (Live PTO, partly clutch-dependent, MB, …
Drain plate Model 934.241, 938.142, 958.4 with transmission 715.378 with code BA1 (Voith retarder, performance optimised) with code BA9 (Voith secondary retarder R 115)
Sealing on shift cylinder for range group or on range module changed TRANSMISSION 715.3/ 5
Determine shim for main shaft Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366/537/538/539 in model …
Determine shim for shift cylinder of splitter group Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366 in model 800 Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Remove/install PTO Transmission 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121
Disassemble assemble countershaft TRANSMISSION 715.523 with CODE G2D (Transmission G 280-16/11.7-0.69)
Remove/install power take-off Transmission 715.310 with power take-off 121
Removing and installing pilot bushing for range group shift rod TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576
Disassemble assemble countershaft TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install power take-off (NMV) shift module Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) …
Remove/install transmission positioner 25.10.2019 Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Only for transmission positioner from the company Wabco Transmission 715.352 in model 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Only for transmission positioner from the company Wabco Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78) Only for transmission positioner from the company Wabco Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Only for transmission positioner from the company Wabco Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) Only for transmission positioner from the company Wabco Transmission 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) Only for transmission positioner from the company Wabco
Notes on heat exchanger Model 800.1 with transmission 715.386/536 with code GG3Y (VIAB start-off and braking system) Model 800.3 Fluid coupling Model 930, 932, 934 with code GK8 (Turbo clutch) Model 963, 964 …
Determine shim for output shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 121-2b, 121-2c
Remove/install lock rod for interlock TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 /561 /567 /568 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.500 /507 /510 /513 /520 /540 /561 with CODE (GS3) …
Disassemble/assemble planetary gear set with shift mechanism Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.508 with code G1H …
Remove/install power take-off 2 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Remove/install radial shaft sealing ring on output flange Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Remove/install rapid exhaust valve of countershaft brake (VGW-B) TRANSMISSION 715.310 with CODE G1E (Transmission G 140-8/9.30-0.79) TRANSMISSION 715.352 with CODE G2B (Transmission G 211-12/14.93-1.0) TRANSMISSION 715.360 with …
Assembling transmission main shaft Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install rear end cover TRANSMISSION 715.570/ 576
Remove/install pulse wheel for travel and speed sensor Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install transmission upwards Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) with code G3Y (Turbo retarder clutch) Transmission 715.523 in model 963, 964 with code G2D …
Determining shim for bearing of range group TRANSMISSION 715.370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Remove/install transmission output flange Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install range group 13.08.2020 Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69)
Remove/install transmission output flange TRANSMISSION 715.370/380/500/507/510/513/515/517/520/525/527/540/561/567/568
Remove/install transmission oil temperature sensor TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) with CODE G5H (Gearshift, manual) TRANSMISSION 715.518 with CODE G1I (Transmission G …
Remove/install oil pipe from power take-off housing Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Remove/install housing cover of power take-off (NMV) drive shaft Transmission 715.371/381/523 with code N4Y (Live power take-off, clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
Remove/install shift piston of splitter group 23.07.2019 Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69)
PTO – install new filter TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 with CODE (N56) Transmission independent power take-off (NMV) i = 1.48 with CODE (N57) Transmission independent power …
Remove/install transmission upwards Transmission 715.352 in model 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install power take-off 2 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123
Remove/install range group TRANSMISSIONS 715.570/ 576
Disassemble/assemble power take-off output shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Remove/install input shaft bearing cap 07.07.2016 Transmission Transmission Transmission Transmission Transmission Transmission Transmission Transmission Transmission Transmission Transmission Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4Y (Live power take-off, clutch-dependent, MB 1.2) 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4Z (Live power take-off, clutch-dependent, MB 1.65) 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) with code N4Y (Live power take-off, clutch-dependent, MB 1.2) 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) with code N4Z (Live power take-off, clutch-dependent, MB 1.65) 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) with code N4Y (Live power take-off, clutch-dependent, MB 1.2) 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
Install range group Transmission 715.570/576
Remove/install transmission downwards Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) except code G3Y (Turbo retarder clutch) except code N4W (Live PTO, partly clutch-dependent, MB …
Disassemble power take-off TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Remove/install radial shaft sealing ring and pilot bushing for splitter group shift rod Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C …
Determining thickness of shim on output shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 123 Transmission …
Disassemble/assemble power take-off output shaft (NMV) TRANSMISSION 715.371/381/523 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371/381/523 with CODE N4X (Live PTO, partly clutch-dependent, MB, …
Identify retaining ring for synchronizer body on main shaft Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366 in model 800 …
Disassemble transmission Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/disassemble range group TRANSMISSION 715.370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Disassemble transmission main shaft TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0 TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
Remove/install radial shaft seal in housing cover of output shaft TRANSMISSION 715.370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Assemble power take-off TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121-1b
Shift transmission manually TRANSMISSION 715 without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) without CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
Remove/install power take-off Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 123 Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 124
Remove/install shift cylinder with solenoid valve at power take-off 1 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121
Remove/install oil pipe from power take-off housing Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Disassemble transmission Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install PTO Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/2c
Disassemble/assemble planetary gear set with shift mechanism Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install range group 12.08.2020 Transmission 715.352 in model 956 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.352 in model 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78)
Checking wear limit between synchronizer cone and sliding sleeve TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576
Determine shim for output shaft TRANSMISSION 715.3 with power take-off 125 TRANSMISSION 715.5 with power take-off 125
Remove/install range group cylinder Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/install lock rod for interlock TRANSMISSION 715.570/ 576
Disassemble power take-off TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Determine shim for oil pump TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Remove/install radial shaft sealing ring on output flange TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121-1b
Remove/install intermediate gear TRANSMISSION 715.371/381/523 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371/381/523 with CODE N4X (Live PTO, partly clutch-dependent, MB, …
Determine shim for drive shaft TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371 with CODE G2E …
Disassemble/assemble power take-off drive shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Assemble transmission Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78)
Determine shim for drive shaft Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Install front section of transmission housing TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371 with CODE G2E …
Remove/install plunger for splitter group travel sensor Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G …
Remove/install radial shaft sealing ring on output flange Transmission 715.310/352/360/371/381/508/518/523/528/571 With power take-off 121-2b
Determine shim for drive shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 121-2b, 121-2c
Modify range group cylinder 05.02.2018 Transmission 715.352 in model 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) When changing from Festo company to Wabco company Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78) When changing from Festo company to Wabco company Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) When changing from Festo company to Wabco company Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) When changing from Festo company to Wabco company Transmission 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) When changing from Festo company to Wabco company
Remove/install transmission on removed engine upwards Transmission 715.508 in model 964 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 in model 964 with code G1I (Transmission G 231-16/17.0-1.0) Transmission …
Remove/install oil pump and pressure relief valve TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Remove/install power take-off TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Remove/install input shaft bearing cap 23.07.2019 Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) except code N4W (Live PTO, partly clutch-dependent, MB 1.2) except code N4X (Live PTO, partly clutch-dependent, MB, 1.65) except code N4Y (Live power take-off, clutch-dependent, MB 1.2) except code N4Z (Live power take-off, clutch-dependent, MB 1.65) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) except code N4W (Live PTO, partly clutch-dependent, MB 1.2) except code N4X (Live PTO, partly clutch-dependent, MB, 1.65) except code N4Y (Live power take-off, clutch-dependent, MB 1.2) except code N4Z (Live power take-off, clutch-dependent, MB 1.65) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69) except code N4W (Live PTO, partly clutch-dependent, MB 1.2) except code N4X (Live PTO, partly clutch-dependent, MB, 1.65) except code N4Y (Live power take-off, clutch-dependent, MB 1.2) except code N4Z (Live power take-off, clutch-dependent, MB 1.65)
Remove/install countershaft brake (VGW-B) Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C …
Disassemble/assemble planetary gear set with shift mechanism Transmission 715.370/380/500/507/510/513/515/517/520/525/527/540/561/567/568
Determine shim for drive shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Tightening procedure of transmission control unit (TCM) Transmission Transmission Transmission Transmission Transmission Transmission Transmission Sensors, transmitters Number 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Only for transmission positioner from Festo company 715.352 in model 956, 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Only for transmission positioner from Festo company 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78) Only for transmission positioner from Festo company 715.366 in model 800 Festo transmission positioner 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Only for transmission positioner from Festo company 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) Only for transmission positioner from Festo company 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) Only for transmission positioner from Festo company
Assemble power take-off Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Remove/install range group 12.08.2020 Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Remove/install shift piston of splitter group 03.05.2018 Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69)
Determine shim for drive shaft Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C …
Remove/install power take-off 2 Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Remove/install power take-off Transmission 715.310 with power take-off 125
Guide bolt for installing range group MODEL 000.001, 374.6, 375.3 /4, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958.0 /2 /4, 970, 972, 974, 976 with TRANSMISSION 715.5 MODEL 000.001, 930, 934 with …
Remove/install power take-off output shaft (live power take-off) Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) …
Disassemble/assemble power take-off 2 TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Remove/install power take-off input shaft TRANSMISSION 715.350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 mit Nebenantrieb NA 131-2b, NA 131-2c
Remove/install splitter box cylinder Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371 in model 963, …
Disassemble assemble countershaft TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0 TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
Remove/install hydraulic pump TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Remove/install travel and speed sensor 09.11.2017 Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69) Transmission 715.571 with code G1F (Transmission G 141-9/14.57-1.0)
Disassemble/assemble bearing housing output Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 121-1b
Remove/install range module 9.3.10 TRANSMISSION 715.350 /370 /380 /515 /525 with CODE (GE3) Mercedes PowerShift TRANSMISSION 715.350 /370 /380 with CODE (GE7) Mercedes PowerShift 2 TRANSMISSION 715.500 /507 /510 /513 /520 /540 with CODE (GS7) Gear control II
Disassemble/assemble power take-off drive shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 123 Transmission …
Remove/install countershaft brake (VGW-B) Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371 in model 963, …
Pull off tapered roller bearing Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366 in model 800
Assemble power take-off Transmission 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Install main shaft and countershaft with shift unit Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Determine shim for drive shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 123 Transmission …
Disassemble/adjust/assemble intermediate shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Remove/install hydraulic pump TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 125
Remove/install countershaft speed sensor 28.03.2014 TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with CODE G1J (Transmission G 260-16/11.7-0.69) TRANSMISSION 715.571 with CODE G1F (Transmission G 141-9/14.57-1.0)
Disassemble/assemble gearshift system Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G …
Remove/install PTO TRANSMISSION 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123 TRANSMISSION 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with …
Remove/install oil pump Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
Remove/install transmission positioner Transmission 715.352 in model 956 with code G2B (Transmission G 211-12/14.93-1.0)
Remove/install shift cables Transmission 715.508 in model 964 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 in model 964 with code G1I (Transmission G 231-16/17.0-1.0) Transmission …
Disassemble/assemble power take-off output shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Install range group TRANSMISSION 715.350 with CODE GE3 (Mercedes PowerShift) TRANSMISSION 715.350 with CODE GE7 (Mercedes PowerShift 2)
Assemble power take-off (live power take-off) Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) …
Adjust locking bar for interlock TRANSMISSION 715.570 /576
Remove/install splitter group solenoid valve 28.03.2014 TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with CODE G1J (Transmission G 260-16/11.7-0.69)
Assembling transmission main shaft TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0 TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
Remove/install oil restrictor on main shaft Transmission 715.350/352/360/370/371/380/381/500/507/508/510/513/515/517/518/520/523/525/527/528/540/561/567/568/570/571/576
Remove/install pulse wheel for travel and speed sensor 28.03.2014 TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) TRANSMISSION 715.381 with CODE G2F (Transmission G 330-12/11.63-0.77) TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.523 with CODE G2D (Transmission G 280-16/11.7-0.69) TRANSMISSION 715.528 with CODE G1J (Transmission G 260-16/11.7-0.69) TRANSMISSION 715.571 with CODE G1F (Transmission G 141-9/14.57-1.0)
Disassemble assemble countershaft Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove and install gearshift system Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Install main shaft and countershaft with shift unit Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69) Transmission 715.539 in model 800
Remove/install drive shaft and countershaft bearing covers 06.06.2018 Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69)
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) Manual transmission 712.63, 715.5 with CODE GS3 (Hydraulic gearshift) with CODE IY2 (Hydraulic fluid as per sheet 345.0)
Assemble power take-off Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Remove/install transmission downwards Transmission 715.352 in model 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Except for vehicles with 4 axles Transmission 715.360 in model 963, 964 with code G2C …
Remove/install oil filter Manual transmission 715.504, 715.517, 715.527 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48) with CODE N57 (Transmission independent power take-off (NMV) i …
Disassemble power take-off TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 123
Disassemble/assemble power take-off shift shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 131
Assembly tool for installing shift rod of splitter group Model 000.001, 800 with transmission 715 Model 956, 959 with transmission 715 Model 963 with transmission 715.3/5 Model 964 with transmission 715.3/5 Model 967 with transmission 715
Disassemble power take-off TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Remove/install transmission oil temperature sensor Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) with code G5G (Mercedes PowerShift 3) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) with …
Remove/install range group travel sensor 28.06.2016 Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69)
Determining shim for housing cover of output shaft TRANSMISSION 715.370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Remove/install shift lever knob with shift lever boot Transmission 715.508 in model 964 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 in model 964 with code G1I (Transmission G 231-16/17.0-1.0) Transmission …
Remove/install radial shaft sealing ring on output flange TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Remove/install hydraulic pump TRANSMISSION 715.352/360/371/381/508/518/523/528/571 with power take-off 135
Remove/install hydraulic pump Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with …
Install main shaft and countershaft with shift unit TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0 TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
Adjust locking bar for interlock TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 /561 /567 /568 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.500 /507 /510 /513 /520 /540 /561 with CODE (GS3) …
Remove/install range group cylinder Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E …
Remove/install rear end cover TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Removing and installing lock rod for interlock Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/install bearing housing output Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Assembling range group TRANSMISSION 715.370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568
Remove/install hydraulic pump Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125
Disassemble/assemble power take-off 2 TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 124
Remove/install hollow shaft Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
Disassemble/assemble range group 10.5.12 TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0 TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77 TRANSMISSION 715.523 with CODE (G2D) Transmission G 280-16/11.7-0.69
Disassemble/assemble cluster gear Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 135
Remove/install power take-off Transmission 715.352/360/371/381/508/518/523/528/571 with power take-off 131
Determine shim for output shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 123 Transmission …
Remove/install output flange and radial shaft sealing ring of power take-off (NMV) output shaft TRANSMISSION 715.371/381/523 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371/381/523 with CODE N4X (Live PTO, partly clutch-dependent, MB, …
Remove/install radial shaft sealing ring and pilot bushing for range group shift rod 09.06.2017 Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69) Transmission 715.571 with code G1F (Transmission G 141-9/14.57-1.0)
Remove/install bearing cap of power take-off (NMV) drive shaft Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) Transmission 715.371/381/523 with code N4X (Live PTO, partly clutch-dependent, MB, 1.65) …
Disassemble/assemble planetary gear set with shift mechanism TRANSMISSION 715.350 with CODE (GE3) Mercedes PowerShift TRANSMISSION 715.350 with CODE (GE7) Mercedes PowerShift 2
Remove and install front section of transmission housing TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) TRANSMISSION 715.381 with CODE G2F (Transmission G 330-12/11.63-0.77) TRANSMISSION 715.523 with …
Disassemble/assemble/adjust intermediate gear Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Disassemble/assemble planetary gear set with shift mechanism TRANSMISSION 715.571 with CODE G1F (Transmission G 141-9/14.57-1.0)
Manual transmission – oil change TRANSMISSION 712.625 in MODEL 958.0 TRANSMISSION 712.634 in MODEL 958.0 TRANSMISSION 715.517 in MODEL 958.2 TRANSMISSION 715.527 in MODEL 958.4 TRANSMISSION …
Remove/install transmission positioner 25.10.2019 Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Only for transmission positioner from Festo company Transmission 715.352 in model 963, 964 with code G2B (Transmission G 211-12/14.93-1.0) Only for transmission positioner from Festo company Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78) Only for transmission positioner from Festo company Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) Only for transmission positioner from Festo company Transmission 715.381 in model 963, 964 with code G2F (Transmission G 330-12/11.63-0.77) Only for transmission positioner from Festo company Transmission 715.523 in model 963, 964 with code G2D (Transmission G 280-16/11.7-0.69) Only for transmission positioner from Festo company
Determine shim for drive shaft Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Remove/install transmission downwards Transmission 715.508 in model 964 with code G1H (Transmission G 230-16/14.2-0.83) Except for vehicles with 4 axles Transmission 715.518 in model 964 with code G1I (Transmission G …
Check/correct transmission oil level Transmission 715.5 in model 950, 952, 953, 954 with engine 541.9 with code G02 (Torque converter clutch (WSK)) Transmission 715.5 in model 950, 952, 954 with engine 542.9 with code G02 …
Remove/install oil cooler Transmission 715 in model 963, 964 with code C6J (Power steering pump, uncontrolled)
Remove/install transmission upwards Transmission 715.371 in model 963, 964 with code G2E (Transmission G 281-12/14.93-1.0) except code G3Y (Turbo retarder clutch) except code N4W (Live PTO, partly clutch-dependent, MB …
Determine shim for output shaft Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 131
Remove/install transmission output flange Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79)
Determine shims of drive shaft and countershaft TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371 with CODE G2E …
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) Manual transmission 715.5 with CODE GS3 (Gearshift, hydraulic) with CODE IY2 (Hydraulic fluid as per sheet 345.0)
Detach front section of transmission housing TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371 with CODE G2E …
Assemble transmission Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Remove/install PTO Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/1c
Remove/install power take-off (NMV) rpm sensor TRANSMISSION 715.371/381/523 with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2) TRANSMISSION 715.371/381/523 with CODE N4X (Live PTO, partly clutch-dependent, MB, …
Disassemble/assemble cluster gear Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571 with power take-off 125
Remove install power take-off PTO 2 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/2c Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 …
Remove and install gearshift system Transmission 715.310 in model 963, 964, 967 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 in model 956, 963, 964 with code G2B (Transmission G …
Remove/install radial shaft sealing ring at output side TRANSMISSION 715.352 with CODE G2B (Transmission G 211-12/14.93-1.0) TRANSMISSION 715.360 with CODE G2C (Transmission G 230-12/11.7-0.78)
Remove/install transmission output flange TRANSMISSION 715.350 with CODE (GE3) Mercedes PowerShift TRANSMISSION 715.350 with CODE (GE7) Mercedes PowerShift 2
Threaded insert for removing reverse idler shaft Model 000.001, 374.5/6, 375.3/4, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958.2/4 with transmission 715.5 Model 000.001, 930, 934 with transmission 715.3 Model …
Document conversion in VeDoc Model 963, 964 with transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) When changing from Festo company to Wabco company Model 963, 964 with transmission …
Remove/install transmission upwards Transmission 715.508 in model 964 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 in model 964 with code G1I (Transmission G 231-16/17.0-1.0) Transmission …
Pull off tapered roller bearing TRANSMISSION 715.371 TRANSMISSION 715.381 TRANSMISSION 715.523
Determine shim for output shaft Transmission 715.371/381/523 with code N4W (Live PTO, partly clutch-dependent, MB 1.2) with clutch part-dependent power take-off (live power take-off) Transmission 715.371/381/523 with …
Assemble power take-off TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571 with power take-off 121-2b, 121-2c
Detach front section of transmission housing Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Determine shim for shift piston of splitter group Transmission 715.310 with code G1E (Transmission G 140-8/9.30-0.79) Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.366/537/538/539 in model 800 Transmission 715.371 with code G2E (Transmission G 281-12/14.93-1.0) Transmission 715.381 with code G2F (Transmission G 330-12/11.63-0.77) Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.523 with code G2D (Transmission G 280-16/11.7-0.69) Transmission 715.528 with code G1J (Transmission G 260-16/11.7-0.69)
Automatic transmission fluids (ATF) (specification 238.22) Transmission 715 in model 800 with fluid coupling Transmission 715 in model 930, 932, 933, 934 with code GK8 (Turbo clutch) Transmission 715 in model 963, 964 with code G3Y (Turbo …
Attach/detach engine support fixture Model 963, 964 with engine 470.9 with transmission 715.352 Model 963, 964 with engine 470.9 with transmission 715.360 Model 963, 964 with engine 470.9 with transmission 715.371 Model …
Determine shims of drive shaft and countershaft Transmission 715.508 with code G1H (Transmission G 230-16/14.2-0.83) Transmission 715.518 with code G1I (Transmission G 231-16/17.0-1.0) Transmission 715.528 with code G1J …
Assembly mandrel for planet gear TRANSMISSION 715.570 TRANSMISSION 715.571 TRANSMISSION 715.576
Disassemble/assemble range group Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
Remove/install radial shaft sealing ring at output side TRANSMISSION 715.371 with CODE G2E (Transmission G 281-12/14.93-1.0) TRANSMISSION 715.381 with CODE G2F (Transmission G 330-12/11.63-0.77) TRANSMISSION 715.508 with …
Remove/install hydraulic pump Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121
Block shift rod of range group shift piston with holding device Transmission 715.352 with code G2B (Transmission G 211-12/14.93-1.0) Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78) Transmission 715.371 with code G2E …
2632 – Manual transmission – Cleaning filter MB transmissions G125-G240 (Mod. des. 714.7-715.2)
Legend of wiring diagram automatic transmission (AT) TRANSMISSION 722.375 in MODEL 902.461 ## as of 757733, 903.462 ## as of 757703, 903.462 ## as of 757715 with ENGINE 602.980 with CODE (G40) Automatik-Getriebe W4A028
Detach/attach shift cylinder with hydraulic line TRANSMISSION 715.510 in MODEL 940, 944, 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0 TRANSMISSION …
Detaching/installing shift cylinder with hydraulic line TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 715.320 /510 /320 /510 with CODE (GS3) “Hydraulic” gearshift except CODE (IY2) Hydraulic fluid as …
Wiring diagram of automatic transmission (AT) TRANSMISSION 722.375 in MODEL 902.461 ## as of 757733, 903.462 ## as of 757703, 903.462 ## as of 757715 with ENGINE 602.980 with CODE (G40) Automatic transmission W4A028
Remove/install engine with removal fixture ENGINE 902.9, 906.9, 926.9 in MODEL 957 with TRANSMISSION 715
Remove and install front section of transmission housing Transmission 712.62 without clutch hydraulic drive bearing Transmission 712.64 without clutch hydraulic drive bearing Transmission 715.054 without clutch hydraulic drive bearing
Remove/install transmission TRANSMISSION 712.611 /62, 715.050 in MODELS 970, 972, 976 with CODE (GE1) Automatic gear control (AGS) TRANSMISSION 712.63, 715.060 in MODEL 970, 972, 974, 976 with CODE …
Check and correct hydraulic oil level Transmission 715.062 in model 384
Remove/install shift lever TRANSMISSION 712.613, 715.051 in MODEL 668, 670 with ENGINE 900.917 /918 /919
Disassemble transmission TRANSMISSION 712.63, 715.060
Remove and install gearshift system Manual transmission 712.61, 712.62, 715.05 with CODE GS1 (Gearshift, manual)Manual transmission 712.63, 715.06 with CODE GS1 (Gearshift, manual)
Disassemble transmission Transmission 712.62, 715.05
Assembling transmission main shaft Manual transmission 712.62, 715.05
Teach in automatic gear control (AGS) control unit Model 384.0 with transmission 715.062
Remove/install hydraulic central clutch release bearing MODEL 375.1, 970, 972, 976 with TRANSMISSION 712.611 /62, 715.050 with CODE (IY2) Hydraulic fluid as per sheet 345.0 except CODE (GE1) Automatic gear control (AGS) MODEL 958.0 …
Dismantling and assembling shift TRANSMISSION 715.051
Remove and install front section of transmission housing Transmission 712.62 with clutch hydraulic drive bearing Transmission 712.64 with clutch hydraulic drive bearing Transmission 715.054 with clutch hydraulic drive bearing
Remove/install transmission TRANSMISSION 715.051 with CODE (NM0) MB PTO 60 2b with flange, high-mounted, low speed with CODE (NM1) MB PTO 60 2b with flange, high-mounted, mid speed with CODE (NM4) …
Determining thickness of shim on output shaft Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2b Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2c
Disassemble/assemble rear section of transmission housing TRANSMISSION 712.62 /63, 715.050 /051 /060
Disassemble assemble countershaft Transmission 715.062 in model 384
Assemble transmission TRANSMISSION 712.63, 715.060
Disassemble/assemble PTO Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2c
Remove/install radial shaft seal for output flange Transmission 712.62/63, 715.050/060 MB-PTO 60-2b Transmission 715.051 MB-PTO 60-2b
Rework assembly tool for retaining ring TRANSMISSION 712, 715
Remove/install clutch housing Manual transmission 715.504 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48)Manual transmission 715.504 with CODE N57 (Transmission independent power …
Remove and install gearshift system TRANSMISSION 712.611 /62 /63, 715.050 /060 with CODE (GS1) “Manual” gearshift transmission installed TRANSMISSION 712.63, 715.060 with CODE (GS1) “Manual” gearshift …
Disassemble assemble countershaft TRANSMISSION 712.63, 715.060
Remove/install PTO Transmission 712.62/63, 715.050/060 MB-PTO 60 1c
Remove and install gearshift system TRANSMISSION 712.611 /62 /63, 715.050 /060 with CODE (GS1) “Manual” gearshift Transmission removed TRANSMISSION 712.63, 715.060 with CODE (GS1) “Manual” gearshift …
Install transmission housing rear section TRANSMISSION 712.62 /63, 715.050 /051 /060
Disassembling and assembling shift detent TRANSMISSION 712.62# /63#, 715.050 /051 /060 ## up to 0041837
Check adjust stroke of shift piston Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2b Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2c
Clutch pressure line modified MODEL 375.1##, 970.###, 972.###, 976.### ## as of 889000 with TRANSMISSION 712.611 /62, 715.050 except CODE (GE1) Automatic gear control (AGS) MODEL 970.###, 972.###, …
Remove/install PTO Transmission 712.620/625/634 with CODE NN2 (MB-NA 60 2c with MPA, low position, rotation N) Transmission 712.623/632, 715.054/064 with CODE NN2 (MB-NA 60 2c with MPA, low …
Removing and installing shift TRANSMISSION 715.051
Check and correct hydraulic oil level TRANSMISSION 712.611 /62, 715.050 in MODELS 970, 972, 976 with CODE (GE1) Automatic gear control (AGS) TRANSMISSION 712.63, 715.060 in MODEL 970, 972, 974, 976 with CODE …
Remove/install PTO Manual transmission 712.62, 712.63, 712.65, 715.054, 715.064
Manual transmission – oil change Transmission 711.622 in model 979.016 Transmission 715.054 in model 693, 694
Dismantle assemble drive shaft. TRANSMISSION 712.62 /63, 715.050 /051 /060
Perform major teach-in process on control unit Model 384.0 with transmission 715.062
Assembling transmission main shaft TRANSMISSION 712.63, 715.060
Remove/install PTO transmission lock TRANSMISSION 712.611 /62 /63, 715.050 /060 with CODE (N80) Power take-off transmission lock with CODE (GS1) “Manual” gearshift TRANSMISSION 712.63, 715.060 with CODE (N80) …
Remove/install hydraulic gear shift cylinder TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
Disassemble transmission TRANSMISSION 712.62, 715.050 /051
Disassemble assemble countershaft TRANSMISSION 712.62, 715.050 /051
Remove/install circlip TRANSMISSION 712.62 /63, 715.050 /051 /060
Disassemble transmission main shaft TRANSMISSION 712.63, 715.060
Teach in automatic gear control (AGS) control unit MODEL 970, 972, 976 with TRANSMISSION 712.611 /62, 715.050 with CODE (GE1) Automatic gear control (AGS) MODEL 970, 972, 974, 976 with TRANSMISSION 712.63, 715.060 with …
Remove/install shift cylinder Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2b Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2c
Remove and install gearshift system TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
Disassemble/assemble rear section of transmission housing Transmission 712.620/630, 715.05/06 Transmission 712.630/639, 715.06 Transmission 715.05/06 Transmission 715.06
Remove/install hydraulic transmission positioner with controller unit TRANSMISSION 712.611 /62, 715.050 in MODELS 970, 972, 976 with CODE (GE1) Automatic gear control (AGS) TRANSMISSION 712.63, 715.060 in MODEL 970, 972, 974, 976 with CODE …
Assembling transmission main shaft TRANSMISSION 712.62, 715.050 /051
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) TRANSMISSION 712.6, 715.0 in MODEL 950, 952, 954 with CODE (GS3) “Hydraulic” gearshift except CODE (IY2) Hydraulic fluid as per sheet 345.0 TRANSMISSION 715.3 in MODEL 950, …
Clutch pressure line modified MODEL 970.###, 972.###, 976.### ## as of 889000 with TRANSMISSION 712.611 /62, 715.050 with CODE (GE1) Automatic gear control (AGS) MODEL 970.###, 972.###, 974.###, 976.### …
Check wear limits of synchronizer rings TRANSMISSION 712.62 /63, 715.050 /051 /060
Remove/install PTO Transmission 712.62/63, 715.050/060 MB-PTO 60-2b Transmission 715.051 MB-PTO 60 2b
Assemble transmission Transmission 712.63 in model 368, 382, 384, 685 Transmission 712.63 in model 693, 695 Transmission 712.63 in model 958 Transmission 712.630/639, 715.06 Transmission 715.06 in model …
Disassembling and assembling shift detent Manual transmission 712.62, 712.63, 712.64, 712.65 with CODE GS1 (Manual gearshift)Manual transmission 715.051, 715.054, 715.064 with CODE GS1 (Manual gearshift)
Checking play between grooved ball bearing and circlip in front section of transmission housing TRANSMISSION 712.62 /63, 715.050 /051 /060
Remove/install neutral position switch TRANSMISSION 712.611 /62 /63, 715.050 /060 with CODE (GS1) “Manual” gearshift TRANSMISSION 712.63, 715.060 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.051
Disassembling and assembling shift detent Manual transmission 712.62, 712.63, 715.05, 715.06
Depressurize pressure reservoir for automatic gear control (AGS) TRANSMISSION 712.611 /62 /63, 715.050 /060 /068 with CODE (GE1) Automatic gear control (AGS) TRANSMISSION 712.63, 715.060 with CODE (GE1) Automatic gear control (AGS)
Remove/install hydraulic pump Transmission 712.62/63, 715.050/060 MB-PTO 60 1c Transmission 712.62/63, 715.050/060 MB-PTO 60 2c Transmission 715.051 MB-PTO 60 2c
Remove/install hydraulic gate cylinder TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
Remove and install gearshift system Manual transmission 712.623, 715.054
Perform minor teach-in process on control unit Model 384.0 with transmission 715.062
Remove/install hydraulic pump Transmission 712.362/451/623/632, 715.054 Transmission 712.631 in model 384.334
Disassemble/assemble PTO Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2b
Remove/install transmission Transmission 712.62/63/64/65, 715.054/064 *
Remove/install PTO Manual transmission 712.064, 712.62, 712.63, 715.054 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48) with CODE N57 (Transmission independent power take-off …
Remove/install transmission Transmission 715.062 in model 384.0
Remove/install PTO Transmission 712.62/63, 715.050/060 MB-PTO 61-10 b
Check main shaft end float TRANSMISSION 712.62 /63, 715.050 /051 /060
Remove/install transmission Manual transmission 715.564
Depressurize pressure reservoir for automatic gear control (AGS) Transmission 715.062 in model 384.076
Remove/install hydraulic transmission positioner with controller unit Transmission 715.062 in model 384
Disassemble assemble countershaft Manual transmission 712.62, 715.05
Remove and install gearshift system Manual transmission 712.61, 712.62, 712.63, 715.05, 715.06 with CODE GS1 (Manual gearshift)
Remove/install input shaft radial shaft sealing ring TRANSMISSION 712.62 /63, 715.050 /051 /060
Remove/install hydraulic central clutch release bearing Model 384.0 with transmission 715.062
Disassemble transmission main shaft TRANSMISSION 712.62, 715.050 /051
Remove/install reverse gear switch TRANSMISSION 712.611 /62 /63, 715.050 /060 with CODE (GS1) “Manual” gearshift TRANSMISSION 712.63, 715.060 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.051
Determine thickness of shim on drive gear Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2b Transmission 712.62/63, 715.050/051/060 MB-PTO 60 2c
Remove/install PTO Transmission 712.62/63, 715.050/060 MB-PTO 60 2c Transmission 715.051 MB-PTO 60 2c
Disassemble transmission main shaft Manual transmission 712.62, 715.05
Check axial play at circlip of transmission main shaft adjust if necessary TRANSMISSION 712.62, 715.050 /051, 712.63, 715.060
Disassemble/assemble PTO Manual transmission 712.650, 712.651, 715.054, 715.064 with CODE NN2 (MB-NA 60 2c with MPA, low-mounted, low speed)Manual transmission 715.051 with CODE NN2 (MB-NA 60 2c with …
Assemble transmission TRANSMISSION 712.62, 715.050 /051
Modify support plate for transmission TRANSMISSION 712.62 /63, 715.050 /051 /060
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) TRANSMISSION 712.630 in MODEL 950.5, 952.5, 954.5 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0 TRANSMISSION 715.060 in MODEL 950.5 …
Determining thickness of shim on output shaft Transmission 712.362/451/623/632, 715.054 with CODE NN2 (MB-NA 60 2c with MPA, low position, rotation N) Transmission 712.623/632, 715.054 with CODE NN2 (MB-NA 60 2c with MPA, …
Assemble transmission Transmission 712.62, 715.05
Remove/install bearing flange of hollow shaft Manual transmission 715.504, 715.517, 715.527 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48)Manual transmission 715.504, 715.517, 715.527 with CODE N57 …
Disassemble transmission Transmission 712.63, 715.06
Remove/install drive shaft Transmission 712.62 Transmission 712.64 Transmission 715.054
Remove/install shift cylinder Manual transmission 712.62, 712.63 with CODE N05 (PTO counter shaft DB, (2c)) with CODE N07 (PTO counter shaft DB, (2b))Manual transmission 715.054, 715.064 with CODE N05 (PTO …
Remove/install hydraulic central clutch release bearing MODEL 970, 972, 976 with TRANSMISSION 712.611 /62, 715.050 with CODE (GE1) Automatic gear control (AGS) MODEL 970, 972, 974, 976 with TRANSMISSION 712.63, 715.060 with …
Remove/install hydraulic central clutch release bearing MODEL 375.1, 970, 972, 976 with TRANSMISSION 712.611 /62, 715.050 except CODE (IY2) Hydraulic fluid as per sheet 345.0 MODEL 958.0 with TRANSMISSION 712.62 /63 except CODE …
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/2c
Legend of wiring diagram for electronic drive system (EAS) TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 as of 1.5.01 with BODY 942.899 with CODE (GE1) Electronic drive control in Verbindung mit GS/EPS, KS/MKR, …
Wiring diagram for power take-off Transmission 715.50/52 in model 930 up to 9/30/05, 932 up to 9/30/05, 933 up to 9/30/05, 934 up to 9/30/05 Transmission 715.51 in model 930 up to 9/30/05, 934 up to 9/30/05 Transmission …
Legend of wiring diagram for electropneumatic power shift (EPS) TRANSMISSION 715.510 /520 /561 in MODEL 375.4 with BODY 375.840 TRANSMISSION 715.510 /520 /561 in MODEL 944 with BODY 944.899 TRANSMISSION 715.060 /320 /510 in …
Remove/install radial shaft seal for output flange Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121
Disassemble/assemble shift housing shift cover TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Remove/install main shutoff valve TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 715.570 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (GS3) …
Remove/install drive shaft and countershaft bearing covers Transmission 715.570/576
Adjusting rear shift gate support and longitudinal support TRANSMISSION 712.611 TRANSMISSION 712.62 TRANSMISSION 712.63 TRANSMISSION 715.060 TRANSMISSION 715.050
Remove/install shift force assist solenoid valve TRANSMISSION 715.570 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (GS3) “Hydraulic” transmission shift TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE (GS3) …
Parameterize power take-off in FR (FMR) control unit Transmission 715.320 in MODEL 950, 952, 953, 954, 375.3 Transmission 715.320 in MODEL 970, 972, 974, 976
Remove/install shift cylinder with solenoid valve on power take-off 1 Transmission 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Determine adjustment shim thickness for output shaft TRANSMISSION 715.350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 mit Nebenantrieb NA 131-2b, NA 131-2c
Wiring diagram of electronic drive system (EAS) TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 up to 31.12.99 with BODY 942.899 with CODE (GE1) Electronic drive control in combination with GS/EPS, …
Remove/install radial shaft seal for output flange Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with …
Dismantle/assemble drive shaft. TRANSMISSION 715.320
Legend of wiring diagram of power take-off TRANSMISSION 710.60 in MODEL 972, 975 as of 1.3.03 TRANSMISSION 710.62 in MODEL 970, 972, 976 as of 1.3.03 TRANSMISSION 715.050 in MODEL 970, 972, 976 as of 1.3.03 …
Wiring diagram of electronic-power shift (EPS) TRANSMISSION 715 in MODEL 957 up to 30.12.05 with BODY 957.810 with CODE (GE1) Electronic drive control
Remove/install shift cylinder with solenoid valve on power take-off 2 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125
Disassemble/assembles/adjust intermediate gear TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 125-10b, NA 125-11b/1b, NA …
Wiring diagram for power take-off TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 up to 31.12.99 with BODY 942.899 with CODE (N04) Power take-off MB-NA121-1b TRANSMISSION 715.500 …
Remove/install PTO transmission lock TRANSMISSION 715.570 with CODE (N80) Power take-off transmission lock with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0 TRANSMISSION …
Remove/install hydraulic central clutch release bearing MODEL 970, 972, 974, 976 with TRANSMISSION 715.570 except CODE (IY2) Hydraulic fluid as per sheet 345.0 MODEL 958.0 with TRANSMISSION 715.576 except CODE (IY2) Hydraulic …
Remove/install shift force assist solenoid valve TRANSMISSION 715.320 in MODEL 375.3 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.320 in MODEL 970, 972, 974, 976 with CODE (GS1) “Manual” gearshift
Disassemble assemble countershaft TRANSMISSION 715.320
Remove oil pipe from power take-off housing install TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 125-10b, NA 125-11b/1b, NA …
Legend of wiring diagram for electropneumatic power shift (EPS) TRANSMISSION 715 in MODEL 957 up to 30.12.05 with BODY 957.810 with CODE (GE1) Electronic drive control
Assembling transmission main shaft TRANSMISSION 715.570/ 576
Wiring diagram of shift force assist TRANSMISSION 712.6 in MODEL 970, 972, 974, 976 with BODY 972.890 with CODE (GS3) Hydraulic gearshift TRANSMISSION 715.0 in MODEL 970, 972, 974, 976 with BODY 972.890 with …
Remove/install neutral position switch TRANSMISSION 715.570 /576
PTO assembly Transmission 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Adjust front gate support and longitudinal support TRANSMISSION 710.602 /603 /604 /607 /608, 715.320 2#
Check service limit between synchronizer cone and sliding sleeve TRANSMISSION 715.320
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) Transmission 715.520 in model 949 with code GS3 (Hydraulic gearshift) Transmission 715.570 in model 949 with code GS3 (Hydraulic gearshift)
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-10b
Adjusting rear shift gate support and longitudinal support TRANSMISSION 715.320 1#
Wiring diagram for electropneumatic power shift (EPS) TRANSMISSION 715 in MODEL 957 as of 2.1.06 with BODY 957.810 with CODE (GE1) Electronic drive control
Disassemble/assemble gearshift system TRANSMISSION 715.570 /576 with CODE (GS1) “Manual” gearshift
Sensor unit removal and installation TRANSMISSION 712.611 /62, 715.050 in MODEL 970, 972, 976 with CODE (GE1) Automatic gear control (AGS) TRANSMISSION 712.63, 715.060 in MODEL 970, 972, 974, 976 with CODE …
Remove/install speed sensor TRANSMISSION 712, 715 in MODEL 375.1 TRANSMISSION 712, 715 in MODEL 958.0 TRANSMISSION 712, 715 in MODEL 970.###, 972.###, 974.###, 976.### #K as of 501092 …
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11c/2c
Remove/install right detachable shift mechanism components TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Remove/install wiring harness at transmission TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Remove/install roller bearing of drive shaft TRANSMISSION 715.320/350/352/360/370/371/380/381/500/507/510/513/515/517/520/525/527/540/561/567/568/570/576 Power take-off 125
Remove/install sealing ring in the left of the shift housing TRANSMISSION 715.570 /576 with CODE (GS1) “Mechanical” transmission shift
Disassemble transmission main shaft TRANSMISSION 715.320
Legend of wiring diagram for gear control (GC) TRANSMISSION 715.350 in MODEL 940.2, 944.0 /2 with BODY 944.890 with CODE (GE3) Mercedes PowerShift
Disassemble/assemble power take-off shift shaft TRANSMISSION 715.350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 mit Nebenantrieb NA 131-2b, NA 131-2c
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123-10
Remove and install clutch throwout lever MODEL 375.3, 374.5, 950.5 /6, 952.5 /6, 953.6, 954.5 with TRANSMISSION 715.570 MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with TRANSMISSION 715.510 MODEL 958.2 with …
Disassemble transmission TRANSMISSION 715.570/576
Remove/install splitter group solenoid valve TRANSMISSION 715.320
Remove/install PTO TRANSMISSION 715.320 with power take-off 123 TRANSMISSION 715.320 with power take-off 124
Remove/install oil pump and pressure relief valve TRANSMISSION 715.320
Remove/install speed sensor TRANSMISSION 712, 715 in MODEL 970, 972, 974, 976 bis Fahrzeug-Ident-End-Nr. K 501091 TRANSMISSION 712, 715 in MODEL 375.1 TRANSMISSION 712, 715 in MODEL 958.0 …
Legend of wiring diagram for electronic drive system (EAS) TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 up to 31.12.99 with BODY 942.899 with CODE (GE1) Electronic drive control in Verbindung mit GS/EPS, …
Remove and install gearshift system TRANSMISSION 715.570 in MODEL 949 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0
Remove and install gearshift system TRANSMISSION 715.570 /576 with CODE (GS1) “Manual” gearshift Transmission removed
Assemble transmission Transmission 715.570/576
Adjusting rear shift gate support and longitudinal support TRANSMISSION 715.320 2#
Remove/install bearing housing output Transmission 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Wiring diagram of power take-off TRANSMISSION 710.60 in MODEL 972, 975 as of 1.3.03 TRANSMISSION 710.62 in MODEL 970, 972, 976 as of 1.3.03 TRANSMISSION 715.050 in MODEL 970, 972, 976 as of 1.3.03 …
Remove/install output shaft radial shaft sealing ring TRANSMISSION 715.320
Disassemble transmission TRANSMISSION 715.320 in MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976 TRANSMISSION 715.320 in MODEL 375.3
Remove/install left detachable shift mechanism components TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Wiring diagram transmission oil cooling TRANSMISSION 715 in MODEL 957 with BODY 957.810 with CODE (N55) Transmission oil cooling
Disassemble assemble power take-off output shaft TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 125-11c/2c
Disassemble/assemble gearshift system TRANSMISSION 715.570 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 715.570 with CODE (GS3) “Hydraulic” gearshift
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) TRANSMISSION 715.5 in MODEL 930, 932, 933, 934 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0
Remove/install reverse gear switch TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 /561 /567 /568 with CODE (GS1) “Manual” gearshift TRANSMISSION 715.500 /507 /510 /513 /520 /540 /561 with CODE (GS3) …
Adjust output shaft end play TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 123, NA 124
Disassemble assemble power take-off PTO 2 output shaft TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/2c TRANSMISSION …
Wiring diagram for gear control (GS) Transmission 715.50/52 in model 930, 932, 933, 934 with code GE2 (Electronic drive control II) with code GS7 (Gear control II) except code GE3 (Mercedes PowerShift) except code GE7 …
Wiring diagram of electronic drive system (EAS) TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 as of 1.1.00 up to 30.4.01 with BODY 942.899 with CODE (GE1) Electronic drive control in combination with …
Remove/install hydraulic pump Transmission 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Adjusting shift finger TRANSMISSION 715.570 /576 with CODE (GS1) “Manual” gearshift
Assembly tool for installing splitter group shift rod TRANSMISSION 715.3 TRANSMISSION 715.5
Steel rod for guiding the transmission oil pipe MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with TRANSMISSION 715.320 MODEL 970, 972, 974, 976 with TRANSMISSION 715.320 MODEL 375.3 with TRANSMISSION 715.320
Detach/attach lines in hydraulic-pneumatic shift (HPS) at engine TRANSMISSION 710, 712, 715 with ENGINE 900.9, 902.9, 924.9 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 712, 715 with ENGINE 902.9 with CODE (GS3) “Hydraulic” gearshift …
Legend of wiring diagram for power take-off TRANSMISSION 715.510 /520 /561 in MODEL 375.4, 944 with CODE (N04) Power take-off MB-NA121-1b TRANSMISSION 715.500 /060 /320 /510 /520 /540 in MODEL 950, 952, 954 as of …
Wiring diagram for gear control (GS) Transmission 715 in model 930, 932, 933, 934 with code GE3 (Mercedes PowerShift) Transmission 715 in model 930, 932, 933, 934 with code GE7 (Mercedes PowerShift 2)
Remove/install transmission TRANSMISSION 715.320 in MODEL 375.3
Wiring diagram of electronic drive system (EAS) TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 up to 1.5.01 with BODY 942.899 with CODE (GE1) Electronic drive control in combination with GS/EPS, …
Determine size of shim for oil pump TRANSMISSION 715.320 Ölpumpe Ausführung 1′
Determine shim for input shaft bearing cap and countershaft bearing cap TRANSMISSION 715.570 /576
Determine size of shim for input shaft bearing cap TRANSMISSION 715.320
Determine size of shim for countershaft bearing cap TRANSMISSION 715.320
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121
Legend of wiring diagram for power take-off TRANSMISSION 712.6, 715.0 in MODEL 375.1 with BODY 375.850 TRANSMISSION 710.0 in MODEL 976 with BODY 972.890 TRANSMISSION 710.6 in MODEL 970, 972, 975, 976 with …
Determine adjustment shim thickness for drive shaft TRANSMISSION 715.350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 mit Nebenantrieb NA 131-2b, NA 131-2c
Wiring diagram for automatic gear control (AGS) TRANSMISSION 712.6, 715.0 /5 in MODEL 970, 972, 974, 976 with BODY 972.890 with CODE (GE1) Automatic gear control (AGS)
Remove/install PTO TRANSMISSION 715.320 with power take-off 121
Legend of wiring diagram for gear control (GS) TRANSMISSION 715.3 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890 with CODE (GS2) Gear control TRANSMISSION 715.5 in MODEL 374.6 with BODY 374.870 with CODE …
Remove install bearing race TRANSMISSION 714, 715, 717
Remove and install gearshift system TRANSMISSION 715.570 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE (GS3) …
Disassembling power take-off TRANSMISSION 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Adjust axial play at input shaft TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 123, NA 124
Wiring diagram for power take-off TRANSMISSION 712.6, 715.0 in MODEL 375.1 with BODY 375.850 TRANSMISSION 710.0 in MODEL 976 with BODY 972.890 TRANSMISSION 710.6 in MODEL 970, 972, 975, 976 with …
Sensor unit removal and installation TRANSMISSION 715.500 in MODEL 940, 942, 943, 950, 952, 953, 954 with CODE (GS2) Gear control TRANSMISSION 715.510 in MODEL 940, 944, 950, 952, 953, 954 with CODE (GS2) …
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/2c
Adjusting shift finger TRANSMISSION 715.320
Remove and install gearshift system TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123-10
Dismantle assemble drive shaft. TRANSMISSION 715.570 /576
Legend of wiring diagram for electropneumatic power shift (EPS) TRANSMISSION 715 in MODEL 957 as of 2.1.06 with BODY 957.810 with CODE (GE1) Electronic drive control
Removing and installing seal components TRANSMISSION 712.63, 715.060 /320 /500 /507 /510 /513 /520 /540 /561 /570 with CODE (GS3) “Hydraulic” gearshift
Adjust output shaft end play TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 121-2b, NA 121-2c
Wiring diagram for power take-off Transmission 715.50/52 in model 930 as of 10/4/05 up to 3/30/07, 932 as of 10/4/05 up to 3/30/07, 933 as of 10/4/05 up to 3/30/07, 934 as of 10/4/05 up to 3/30/07 Transmission 715.51 in …
Wiring diagram for power take-off Transmission 715.50/52 in model 930 as of 4/2/07, 932 as of 4/2/07, 933 as of 4/2/07, 934 as of 4/2/07 Transmission 715.51 in model 930 as of 4/2/07, 934 as of 4/2/07 Transmission 715.54 in …
Remove/install rear end cover TRANSMISSION 715.320
Remove/install power take-off shift fork TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121
Remove/install neutral position switch TRANSMISSION 715.320
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123-11
Disassemble/assemble cluster gear TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 125-10b, NA 125-11b/1b, NA …
Legend of wiring diagram for automatic gear control (AGS) TRANSMISSION 712.6, 715.0 /3 /5 in MODEL 950.5, 952.5, 954.5 with BODY 940.890 with CODE (GE1) Automatic gear control (AGS)
Wiring diagram for power take-off TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 as of 1.1.00 up to 30.4.01 with BODY 942.899 with CODE (N04) Power take-off MB-NA121-1b TRANSMISSION …
Remove/install solenoid valve TRANSMISSION 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Wiring diagram for power take-off TRANSMISSION 715.510 /520 /561 in MODEL 375.4, 944 with CODE (N04) Power take-off MB-NA121-1b TRANSMISSION 715.500 /060 /320 /510 /520 /540 in MODEL 950, 952, 954 as of …
Fixing reverse gear shift rail in installation position TRANSMISSION 715.570 /576
Wiring diagram for gear control (GS) TRANSMISSION 715.350 in MODEL 940.2, 944.0 /2 with BODY 944.890 with CODE (GE3) Mercedes PowerShift
Adjusting shift finger TRANSMISSION 715.570 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 715.570 with CODE (GS3) “Hydraulic” gearshift
Remove/install gear shift cylinder TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Remove/install countershaft speed sensor TRANSMISSION 712.611 /62 /63 TRANSMISSION 715.050 /060 /500 /507 /510 /513 /517 /520 /527 /540 /561 /567 /568 /570 /576 TRANSMISSION 715.350 /370 /380 /515 /525 with CODE …
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/1b Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 …
Disassemble/assemble range group TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with …
Remove/install hydraulic central clutch release bearing MODEL 970, 972, 974, 976 with TRANSMISSION 715.570 with CODE (IY2) Hydraulic fluid as per sheet 345.0 MODEL 958.0 with TRANSMISSION 715.576 with CODE (IY2) Hydraulic fluid as …
Remove/install radial shaft seal for output flange Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-10b
Wiring diagram for gear control (GS) TRANSMISSION 715.3 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890 with CODE (GS2) Gear control TRANSMISSION 715.5 in MODEL 374.6 with BODY 374.870 with CODE …
Sensor unit removal and installation Transmission 712.63 in MODEL 950, 952, 954 with CODE (GS3) “Hydraulic” gearshift Transmission 715.060 in MODEL 950, 952, 954 with CODE (GS3) “Hydraulic” gearshift Transmission …
Remove/install main shutoff valve TRANSMISSION 715.570 /576 with CODE (GS1) “Manual” gearshift
Disassemble assemble countershaft TRANSMISSION 715.570 /576
Remove/install input shaft radial shaft sealing ring TRANSMISSION 715.320
Disassemble/assemble drive shaft power take-off TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 123, NA 124
Adjust axial play at input shaft TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 125-10b
Disassemble transmission main shaft TRANSMISSION 715.570 /576
Remove install power take-off PTO 2 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/1b Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 …
Remove/install input shaft and countershaft bearing covers TRANSMISSION 715.320
Remove/install transmission output flange TRANSMISSION 715.320
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 124-10
Determine shim for cylindrical actuator of cascade box TRANSMISSION 715.320 /350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540
Calculating size of shim for main shaft TRANSMISSION 715.320
Remove/install radial shaft seal for output flange TRANSMISSION 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Remove/install second output Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with …
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123-11
Legend of wiring diagram for power take-off TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 as of 1.1.00 up to 30.4.01 with BODY 942.899 with CODE (N04) Power take-off MB-NA121-1b TRANSMISSION …
Remove/install countershaft speed sensor TRANSMISSION 715.320
Wiring diagram of shift force assist TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899
Assembling transmission main shaft TRANSMISSION 715.320
Determining thickness of shim on output shaft TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 123-10c, NA 124-10c
Remove/install gear control valve TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Remove/install shift rod and shift piston for splitter group TRANSMISSION 715.320
Disassemble assemble power take-off PTO 2 TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/2c TRANSMISSION …
Adjust axial play at input shaft TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 121-2b, NA 121-2c
Disassemble/assemble shift housing bearing cap TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 124-10
Wiring diagram of shift force assist Transmission 715 in model 930, 932, 933, 934 with code GS3 (Hydraulic gearshift)
Remove/install radial shaft seal and pilot bushing for splitter group shift rod TRANSMISSION 715.320
Removing and installing hydraulic gear shift cylinder TRANSMISSION 715.570 in MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (GS3) “Hydraulic” transmission shift TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE …
Install pistons TRANSMISSION 712.63, 715.060 /320 /500 /507 /510 /513 /520 /540 /561 /570 with CODE (GS3) “Hydraulic” gearshift
Determining shim for oil pump TRANSMISSION 715.320 Ölpumpe Ausführung 2′
Remove/install power take-off indicator switch TRANSMISSION 715.350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 131
Remove/install hydraulic gate cylinder TRANSMISSION 715.570 in MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (GS3) “Hydraulic” transmission shift TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE …
Disassembling and assembling shift control unit TRANSMISSION 712.63, 715.060 /320 /500 /507 /510 /513 /520 /540 /561 with CODE (GS3) “Hydraulic” gearshift
Legend of wiring diagram for power take-off TRANSMISSION 715.500 /520 /540 in MODEL 950.0 /1 /2, 952.1 /2, 954.0 /1 /2 up to 31.12.99 with BODY 942.899 with CODE (N04) Power take-off MB-NA121-1b TRANSMISSION 715.500 …
Wiring diagram for electropneumatic power shift (EPS) TRANSMISSION 715.510 /520 /561 in MODEL 375.4 with BODY 375.840 TRANSMISSION 715.510 /520 /561 in MODEL 944 with BODY 944.899 TRANSMISSION 715.060 /320 /510 in …
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-10b
Remove/install hydraulic gate cylinder Transmission 715.520 in model 949 with code GS3 (Hydraulic gearshift) Transmission 715.570 in model 949 with code GS3 (Hydraulic gearshift)
Removing and installing hydraulic gear shift cylinder Transmission 715.520 in model 949 with code GS3 (Hydraulic gearshift) Transmission 715.570 in model 949 with code GS3 (Hydraulic gearshift)
Remove/install shift cylinder with solenoid valve on power take-off 1 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125
Disassembly assembly of shift unit TRANSMISSION 715.570 /576
Disassemble assemble power take-off output shaft TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 125-10b, NA 125-11b/1b, NA …
Determine shim for shift piston of splitter group TRANSMISSION 715.320 /350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540
Remove/install transmission oil temperature sensor TRANSMISSION 715.350 /370 /380 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576
Disassemble/assemble bearing housing output TRANSMISSION 715.350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 mit Nebenantrieb NA 131-2b
Remove/install transmission downwards TRANSMISSION 715.570 in MODEL 949 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0
Disassemble/assemble shift housing of second output TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123 TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 …
Remove/install radial shaft seal for output flange Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125
Remove/install shift cylinder with solenoid valve on power take-off 1 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 123 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with …
Remove/install transmission TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Remove/install output shaft radial shaft sealing ring TRANSMISSION 715.570/576
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11b/1b TRANSMISSION …
Legend of wiring diagram for transmission oil cooling TRANSMISSION 715 in MODEL 957 with BODY 957.810 with CODE (N55) Transmission oil cooling
Legend of wiring diagram for shift force assistance TRANSMISSION 712.6 in MODEL 970, 972, 974, 976 with BODY 972.890 with CODE (GS3) “Hydraulic” gearshift TRANSMISSION 715.0 in MODEL 970, 972, 974, 976 with BODY 972.890 …
Disassemble/assemble gearshift system TRANSMISSION 715.320 in MODEL 375.3 TRANSMISSION 715.320 in MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976
Disassemble/assemble bearing housing for 2nd PTO TRANSMISSION 715.320 /350 /352 /360 /370 /371 /380 /381 /500 /507 /510 /513 /515 /517 /520 /525 /527 /540 /561 /567 /568 /570 /576 Nebenantrieb NA 123-11, NA 124-11
Legend of wiring diagram for shift force assist TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 ATEGO 18-26t
Remove/install splitter group shift cylinder TRANSMISSION 715.320
Wiring diagram for automatic gear control (AGS) TRANSMISSION 712.6, 715.0 /3 /5 in MODEL 950.5, 952.5, 954.5 with BODY 940.890 with CODE (GE1) Automatic gear control (AGS)
Remove/install shift cylinder with solenoid valve on power take-off 1 Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121
Remove/install gearshift lever TRANSMISSION 710.###, 712.###, 715.### 1# with ENGINE 900.9, 902.9, 924.9 with CODE (GS1) “Manual” gearshift TRANSMISSION 712.###, 715.### 1# with ENGINE 925.9 …
Disassembling power take-off TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 124-11
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 125-11c/2c
PTO assembly Transmission 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 With power take-off 124-11
Remove/install main shutoff valve TRANSMISSION 715.570 in MODEL 949 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0
Assemble transmission TRANSMISSION 715.320 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 TRANSMISSION 715.320 in MODEL 970, 972, 974, 976 TRANSMISSION 715.320 in MODEL 375.3
Remove/install transmission TRANSMISSION 715.320 in MODELS 950.5 /6, 952.5 /6, 953.6, 954.5
Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS) TRANSMISSION 715.570 in MODEL 970, 972, 974, 976 with CODE (GS3) “Hydraulic” gearshift with CODE (IY2) Hydraulic fluid as per sheet 345.0
PTO assembly TRANSMISSION 715.320/350/370/380/500/507/510/513/515/520/525/540/561/570 with power take-off 121