Service manual Mercedes 700 Transmission | Up to 2020 incl.

Disassemble/assemble rear section of transmission housing Transmission 700.760 in model 910 with engine 651
Remove/install oil cooling system return line Transmission 700.750 in model 910
Remove/install starter Engine 651 in model 910 with transmission 700.750
Remove differential tapered roller bearing Transmission 700.760 in model 910 with engine 651
Remove/install clutch hydraulic line Model 910 with transmission 700.760
Remove/install shift tower Transmission 700.76 in model 910
Commission dual-clutch transmission after repair Transmission 700.40
Adjust shift cables Transmission 700.76 in model 910 Shift cable with safety clip Transmission 711.6 in model 907 Shift cable with safety clip
Install differential tapered roller bearing Transmission 700.760 in model 910 with engine 651
Remove/install cover at selector lever Model 470, 471 with transmission 700.770 Model 470, 471 with transmission 722.903
Removing and installing transmission suspension Transmission 700.4 in model 190
Automatic transmission fluids (ATF) (specification 236.14) Transmission 700.77 Transmission 722.6 Transmission 722.9
Disassemble/assemble transmission housing Transmission 700.40
Remove/install selector lever with bearing bracket Model 470, 471 with transmission 700.770 Model 470, 471 with transmission 722.9
Remove/install park pawl radial shaft sealing ring Transmission 700.750 in model 910
Disconnect/connect transmission oil line Model 907 with transmission 722.9, 725.0 Model 910 with transmission 700.750
Detach/attach torque converter of clutch plate Transmission 700.750 in model 910
Remove/install drive shaft Model 190 with transmission 700.4
Remove/install shift gate Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.76
Adjust shift cables for manual transmission Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.76
Automatic transmission – Oil change Transmission 700.750 in model 910
Remove corrosion from crankshaft Transmission 700.770 Transmission 722.6/9, 725.0
Remove/install shift lever boot Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.76
Remove/install starter Engine 651 in model 910 with transmission 700.760
Install differential Transmission 700.40 in model 190
Remove/install central clutch operator Transmission 700.76 in model 910
Pressing on tapered roller bearing Transmission 700.760 in model 910 with engine 651
Disassemble transmission housing Transmission 700.760 in model 910 with engine 651
Remove/install left oil lines on dual-clutch transmission Transmission 700.4 in model 190
Remove/install transmission housing connector coupling sealing rings Transmission 700.750 in model 910
Remove/install boot at gearshift lever Transmission 700.780 in model 470, 471
Remove/install automatic transmission fluid cooler Transmission 700.750 in model 910
Measuring tool for transmission oil level Transmission 700.760 in model 910
Remove/install radial shaft sealing ring at input side Transmission 700.76 in model 910
Assemble transmission housing Transmission 700.760 in model 910 with engine 651
Remove/install dual-clutch transmission Transmission 700.4 in model 197
Fill automatic transmission with transmission oil Model 910 with transmission 700.750
Disconnect/connect transmission oil line Transmission 700.4 in model 190 Transmission 722.9 in model 217, 222 Transmission 724.2 in model 166, 205, 222, 253 Transmission 725.0 in model 166, 167, 205, 213, 217, 222, 223, 238, …
Detach/attach shift cables on shift gate Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.76
Inspect ATF level in automatic transmission, add ATF if necessary 14.12.09 TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 TRANSMISSION 722.750 /751 in MODEL 414.700
Attach gear set housing to differential housing TRANSMISSION 700.40
Automatic transmission – Oil change Transmission 700.4 in model 190, 197
Remove/install shift cables Transmission 700.76 in model 910 Transmission 711.6 in model 907
Remove/install DIRECT SELECT selector lever Model 907 with transmission 722.9 Model 910 with transmission 700.75
Remove/install clutch 19.05.2020 Model 907 with engine 642, 651 with transmission 711.6 Model 907 with engine 651 with transmission 700.790 Model 907.1/2/6 with engine 654.9 with transmission 711.6 Model 910 with engine 651 with transmission 700.76
Remove/install automatic transmission oil pan Transmission 700.750 in model 910
Install clutch housing on differential housing Transmission 700.40
Remove/install axle shaft radial shaft seals TRANSMISSION 700.40
Remove/install radial shaft sealing rings of axle shafts Transmission 700.760 in model 910
Notes on working on clutch operating system Model 470, 471 with transmission 700.780 Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.760
Remove/install transmission Model 910 with engine 651 with transmission 700.760
Remove/install suction and pressure lines in transmission housing Transmission 700.750 in model 910
Automatic transmission fluids (ATF) (specification 236.82) Model 910 with transmission 700.750
Remove/install central clutch operator Transmission 700.790 in model 907
Remove/install automatic transmission control unit Model 910 with transmission 700.75
Remove/install gear set for 3rd and 4th gear Transmission 700.760 in model 910 with engine 651
Remove/install major assembly carrier Engine 651 in model 910 with transmission 700.760
Remove/install automatic transmission Model 910 with transmission 700.750
Bleed clutch actuation system Model 907 with transmission 700.790 Model 907 with transmission 711.6
Adjustment tool for shift cable length adjuster Model 447 with transmission 700.7, 710.5, 711.6 Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.760
Disassemble/assemble transmission Transmission 700.760 in model 910 with engine 651
Remove/install clutch hydraulic line Model 907 with transmission 700.790 Model 907 with transmission 711.6
Pull off tapered roller bearing Transmission 700.760 in model 910 with engine 651
Remove/install oil cooling system feed line Transmission 700.750 in model 910
Remove/install pedal bracket of clutch pedal Model 907 with transmission 700.79, 711.6 Model 910 with transmission 700.76
Notes on working on central clutch release bearing of transmission Model 447 with transmission 700.730, 710.5, 711.680 Model 636 with transmission 711.6, 716.6 Model 639 with transmission 711.6, 716.6 Model 900 with transmission 711.6 Model 906 with …
Remove/install transmission Transmission 700.790 in model 907
Remove differential Transmission 700.40 in model 190
Remove/install torque converter Transmission 700.750 in model 910
Remove/install over-center spring of clutch pedal Model 907 with transmission 711.6 Model 910 with transmission 700.76
Bleed clutch actuation system Model 910 with transmission 700.760
Detach/attach shift cables at transmission Transmission 700.790 in model 907
Detach/attach shift cables at transmission Model 910 with transmission 700.760
Remove/install lines at automatic transmission Model 910 with transmission 700.750
Remove/install drive plate Engine 651 in model 910 with transmission 700.750
Remove/install engine with transmission Engine 282 in model 118, 177, 247 with transmission 700.42
Notes on automatic transmission Transmission 700.42 Transmission 700.750 in model 910 Transmission 700.770 in model 470, 471 Transmission 722.3/4/5/6/8/9 Transmission 722.6 in model 636, 639 Transmission 722.6 in …
Remove/install clutch master cylinder feed hose Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.760
Remove/install central clutch operator Transmission 700.790 in model 907
Adjust shift cables Transmission 700.76 in model 910 Shift cable with sliding piece Transmission 700.790 in model 907 Shift cable with sliding piece Transmission 711.6 in model 907 Shift cable with sliding piece
Attach/detach transmission at assembly stand Transmission 700.760 in model 910 with engine 651
Remove/install radial shaft sealing ring at input side Transmission 700.75 in model 910
Remove/install engine with transmission Engine 608 in model 118, 177, 247 with transmission 700.42
Measure torsional play of two-mass flywheel Engine 651 in model 907 with transmission 711.6 Engine 651 in model 910 with transmission 700.760 Engine 654.9 in model 907.1/2/6 with transmission 711.6
Manual transmission – Oil change Transmission 700.760 in model 910
Remove/install clutch master cylinder Model 907 with transmission 700.790 Model 907 with transmission 711.6 Model 910 with transmission 700.76
Remove/install right oil lines from dual-clutch transmission to connecting point Transmission 700.4 in model 190
Detach/attach dual-clutch transmission on assembly stand Transmission 700.40
Remove/install drive shaft with drive shaft housing Model 190 with transmission 700.4
Remove/install electrohydraulic controller unit Transmission 700.750 in model 910
Manual transmission – Oil change Transmission 700.790 in model 907 Transmission 711.6 in model 907
Remove/install rear transmission cover Transmission 700.750 in model 910
Check oil level in automatic transmission and correct if necessary Transmission 700.750 in model 910
Remove/install a flywheel Engine 651 in model 910 with transmission 700.760
Remove/install a flywheel Engine 651 in model 907 with transmission 700.79, 711.6
Detach gear set housing from differential housing TRANSMISSION 700.40
General information on repair work on transmission Transmission 700.4 in model 190, 197 Transmission 722.9 in model 447 with code ZG2 (Permanent all-wheel drive) Transmission 722.9 in model 470, 471 Transmission 722.96/97 …
Remove/install dual-clutch transmission Transmission 700.40 in model 190
Remove/install selector lever knob Model 470, 471 with transmission 700.770 Model 470, 471 with transmission 722.9
Remove clutch housing from differential housing TRANSMISSION 700.40
Remove/install radial shaft sealing rings of axle shafts Transmission 700.750 in model 910
Clean sealing surfaces Transmission 700.40
Remove/install automatic transmission fluid cooler Transmission 700.770 in model 470, 471 with engine 699.301/303
Automatic transmission – Oil change Transmission 700.77 in model 470, 471
Bleed clutch actuation system Model 470 with transmission 700.78 Model 471 with transmission 700.78
Remove/install clutch master cylinder feed hose Model 470 with transmission 700.78 Model 471 with transmission 700.78
Detach/attach clutch master cylinder threaded rod on clutch pedal Model 470 with transmission 700.78 Model 471 with transmission 700.78
Remove/install oil lines of oil cooling for automatic transmission Transmission 700.770 in model 470, 471 with engine 699
Remove/install pedal bracket of clutch pedal Model 470 with transmission 700.78 Model 471 with transmission 700.78
Detach/attach manual transmission on engine Transmission 700.780 in model 470 with engine 200
Remove/install switch for clutch pedal rear end position Model 470, 471 with transmission 700.78
Remove/install drive plate Model 470, 471 with engine 699 with transmission 700.770
Detach/attach shift cables at transmission Transmission 700.780 in model 470, 471
Remove/install switch for clutch pedal front end position Model 470 with transmission 700.78 Model 471 with transmission 700.78
Check clutch pressure plate and clutch plate Model 470, 471 with transmission 700.780
Remove/install automatic transmission fluid cooler Transmission 700.77 in model 470 with engine 699.305
Remove/install clutch Model 470, 471 with transmission 700.780
Remove/install a flywheel Model 470, 471 with engine 699 with transmission 700.780
Remove/install release bearing Model 470, 471 with transmission 700.780
Remove/install manual transmission Transmission 700.780 in model 470, 471 with engine 699
Remove/install clutch pressure plate and clutch plate Model 470, 471 with transmission 700.780
Detach/attach torque converter of clutch plate Transmission 700.770 in model 470, 471
Remove/install torque converter Transmission 700.770 in model 470, 471
Remove/install transmission with torque converter Transmission 700.770 in model 470, 471 with engine 699
Remove/install clutch slave cylinder Model 470, 471 with engine 699 with transmission 700.78
Detach/attach release bearing on guide tube Model 470 with transmission 700.780 Model 471 with transmission 700.780
Remove/install clutch slave cylinder Model 470 with engine 200 with transmission 700.78
Check/correct transmission oil level Transmission 700.780 in model 470, 471
Remove/install clutch master cylinder Model 470, 471 with transmission 700.78
Remove/install manual transmission Transmission 700.780 in model 470 with engine 200
Dual-clutch transmission oils (specification 239.21) Transmission 700.420/421/422/423 in model 177 Transmission 700.421/422/423 in model 118 Transmission 700.422/423 in model 247
Remove/install boots on front axle shaft Model 118, 177, 247 with transmission 700.42
Remove/install selector lever with bearing bracket Model 453 (except 453.09/39/49) with transmission 700.41
Remove/install flywheel / drive plate Engine 282 in model 118, 177, 247 with transmission 700.42
Remove/install cable of selector lever lock Model 453 (except 453.09/39/49) with transmission 700.41
Remove/install dual-clutch transmission Transmission 700.42 in model 118, 177, 247 with engine 608
Remove/install front axle shafts Model 118, 177, 247 with transmission 700.42
Remove/install transmission cooling coolant recirculation pump Transmission 700.42 in model 118, 177, 247
Check oil level of dual-clutch transmission correct if necessary Transmission 700.42 in model 118, 177, 247
Remove/install shift cables MODEL 453 with TRANSMISSION 700.12
Remove/install gearshift lever with bearing bracket Model 453 (except 453.09/39/49) with transmission 700.12
Remove/install dual-clutch transmission Transmission 700.42 in model 118, 177, 247 with engine 282
Remove/install flywheel / drive plate Engine 608 in model 118, 177, 247 with transmission 700.42
Remove/install shift rod of countershaft Transmission 700.7 in model 447
Fasten transmission on assembly stand Model 447 with transmission 700.7
Remove/install gearshift lever with bearing bracket Model 447 with transmission 700.7, 710.5, 711.6
Remove/install differential tapered roller bearing Model 447 with transmission 700.7
Disassemble countershaft Model 447 with transmission 700.7 Short countershaft
Remove/install central clutch operator Model 447 with engine 622 with transmission 700.7
Assemble transmission housing Model 447 with transmission 700.7
Checking pressure plate and clutch disk Model 447 with transmission 700.730, 710.510, 711.680
Remove/install drive shaft radial shaft sealing ring Model 447 with transmission 700.7
Install differential tapered roller bearing Model 447 with transmission 700.7
Remove differential tapered roller bearing Model 447 with transmission 700.7
Remove/install transmission Transmission 700.7 in model 447 with engine 622
Removing and installing transmission suspension Transmission 700.4 in model 197
Adjust shift cables for manual transmission Model 447 with transmission 700.730, 710.510, 711.680
Disassemble countershaft Model 447 with transmission 700.7 Long countershaft
Remove/install bearing of shift finger in rear section of transmission housing Transmission 700.7 in model 447
Remove/install shift cables Model 447 with transmission 700.7, 710.5, 711.6
Replacing tapered roller bearing Model 447 with transmission 700.7
Remove/install axle shaft radial shaft sealing rings Model 447 with engine 622 with transmission 700.7
Disassemble/assemble transmission Model 447 with transmission 700.7
Manual transmission – oil change Transmission 700.7 in model 447
Pressing on tapered roller bearing Model 447 with transmission 700.7
Remove/install gear recognition sensor Transmission 700.7 in model 447 with engine 622.8
Remove/install boot at gearshift lever Model 447 with transmission 700.7, 710.5, 711.6
Remove/install clutch master cylinder Model 447 with transmission 700.7, 710.5, 711.6
Disassemble/assemble front section of transmission housing Model 447 with transmission 700.7
Remove/install backup lamp switch Model 447 with engine 622.9 with transmission 700.7 Model 447 with transmission 710.5, 711.6
Remove/install feed line on master cylinder Model 447 with transmission 700.7, 710.5, 711.6
Pull off tapered roller bearing Model 447 with transmission 700.7
Disassemble/assemble rear section of transmission housing Model 447 with transmission 700.7
Remove/install clutch hydraulic line Model 447 with engine 622 with transmission 700.7
Assemble countershaft Model 447 with transmission 700.7 Long countershaft
Disassemble transmission housing Model 447 with transmission 700.7
Remove/install neutral position switch Transmission 700.7 in model 447 with engine 622.9
Disassemble assemble countershaft Model 447 with transmission 700.7
Assemble countershaft Model 447 with transmission 700.7 Short countershaft
Remove/install pedal bracket of clutch pedal Model 447 with transmission 700.7, 710.5, 711.6
Remove/install bearing of transmission mounting Transmission 700.42 in model 118, 177, 247 Transmission 724.0 in model 118, 177, 247 Transmission 724.1 in model 118, 177, 247
Remove/install clutch pedal switch Model 447 with transmission 700.7, 710.5, 711.6
Remove/install central clutch operator MODEL 415 with TRANSMISSION 700.710 MODEL 415 with TRANSMISSION 700.720
Drain/fill transmission oil Model 415 with engine 200 with transmission 700.740
Disassemble countershaft TRANSMISSION 700.710 in MODEL 415
Fasten transmission on assembly stand MODEL 415 with TRANSMISSION 700
Assemble transmission housing TRANSMISSION 700.710 in MODEL 415
Remove/install clutch Model 415 with engine 200 with transmission 700.720 Model 415 with engine 607 with transmission 700.710 Model 415 with engine 607, 608 with transmission 700.720
Adjust shift cables for manual transmission MODEL 415 with TRANSMISSION 700.720
Assemble countershaft TRANSMISSION 700.710 in MODEL 415
Disassemble transmission housing Transmission 700.710 in model 415
Remove/install shift shaft TRANSMISSION 700.710 in MODEL 415
Remove/install pedal bracket of clutch pedal Model 415 with transmission 700.710/720
Remove/install transmission cover TRANSMISSION 700.710 in MODEL 415
Detach/attach cable Model 415 with transmission 700.740
Remove/install shift lever knob with shift lever boot Transmission 700.71/72 in model 415
Disassemble/assemble front section of transmission housing TRANSMISSION 700.710 in MODEL 415
Wiring diagram for electronic selector lever module control unit Transmission 700 in model 415 with code GK7 (6G-DCT)
Wiring diagram for dual clutch transmission control unit Transmission 700 in model 415 with code GK7 (6G-DCT)
Remove/install transmission Model 415 with transmission 700.710
Remove/install backup lamp switch Model 415 with transmission 700.71/72
Disassemble/assemble transmission Transmission 700.710 in model 415
Measure tilting and torsioning play at two-mass flywheel Model 415 with engine 200 with transmission 700.720 Model 415 with engine 607 with transmission 700.710 Model 415 with engine 607, 608 with transmission 700.720
Remove/install transmission Model 415 with transmission 700.720
Remove/install front axle shaft Model 415 with transmission 700
Remove/install shift cables MODEL 415 with TRANSMISSION 700
Remove/install axle shaft radial shaft sealing rings Model 415 with transmission 700.710/720
Remove/install shift lever knob trim piece Transmission 700 in model 415 with code FP4 (Chrome interior package)
Drain/fill transmission oil Transmission 700.710 in model 415 with engine 607 Transmission 700.720 in model 415 with engine 200 Transmission 700.720 in model 415 with engine 607, 608
Detach/attach shift cables at transmission Model 415 with transmission 700
Remove/install clutch pedal switch Model 415 with transmission 700.710/720
Remove/install dual-clutch transmission Transmission 700.740 in model 415 with engine 200
Remove/install brake pedal pedal bracket Model 415 with transmission 700.710/720/740
Remove/install drive shaft radial shaft sealing ring TRANSMISSION 700.710 in MODEL 415
Remove/install gearshift lever with bearing bracket MODEL 415 with TRANSMISSION 700
Detach/attach engine support Model 415 with engine 200 with transmission 700.740
Disassemble assemble countershaft TRANSMISSION 700.710 in MODEL 415
Remove/install radial shaft sealing rings of axle shafts Model 415 with engine 200 with transmission 700.740
Disassembling and assembling floor shift TRANSMISSION 722.750 /751 in MODEL 414.700
Remove/install shift direction and selection direction turning angle sensor TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700 with CODE (GS5) AKB – automatic clutch actuation
Removing and installing radial shaft seal for torque converter housing TRANSMISSION 722.750 /751 in MODEL 414.700
Detach/attach transmission housing on torque converter housing TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install selector lever handle with covering Transmission 700.74 in model 415
Disassemble assemble countershaft TRANSMISSION 700.720 in MODEL 415
Disassembly and assembly multiplate clutch K5 TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install differential and gear sets TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Disassemble transmission housing TRANSMISSION 700.720 in MODEL 415
Move back adjusting ring of self-adjusting clutch MODEL 168 with TRANSMISSION 716.5 MODEL 414.700 MODEL 638 with ENGINE 111.950 /980, 611.980 except CODE (G40) Automatic transmission MODEL 690.6 with ENGINE 611.983 …
Assemble transmission housing TRANSMISSION 700.720 in MODEL 415
Adjust shift lock cables TRANSMISSION 722.750 /751 in MODEL 414.700
Removing and installing brake pedal shift lock cable TRANSMISSION 722.750 /751 in MODEL 414.700
Remove/install dual-clutch transmission control unit Transmission 700.740 in model 415 with engine 200
Disassemble main shaft TRANSMISSION 700.720 in MODEL 415
Disassemble/assemble output shaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Disassemble/assemble multiplate clutch K2 and KR TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install floor selector TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Disassemble/assemble rear section of transmission housing Transmission 700.720 in model 415
Measure and adjust axial play of output shaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Measuring and adjusting axial play of input shaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Reset and tension dual clutch Model 415 with engine 200 with transmission 700.740
Removing and installing torque converter TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install electrohydraulic controller unit (transmission installed) TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Measure and set pre-tension of taper roller bearings of differential TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Adjust shift cables TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Measuring and adjusting preload of differential tapered roller bearings TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Remove/install radial shaft seal shift lock and range selector lever TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install automatic transmission range selector cable TRANSMISSION 722.750 /751 in MODEL 414.700
Deletion of lever for shift lock cable ignition lock at transmission TRANSMISSION 722.700 ## as of 0129631 as of 24.1.01, 722.701 ## as of 0132072 as of 8.2.01
Remove/install dual clutch Model 415 with engine 200 with transmission 700.740
Remove/install shift module TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700 with CODE (GS5) AKB – automatic clutch actuation
Remove/install dual-clutch transmission shift cable Transmission 700.740 in model 415 with engine 200
Assemble main shaft TRANSMISSION 700.720 in MODEL 415
Remove/install gear sets TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Disassembly and assembly multiplate clutch K4 TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Measuring and adjusting axial play of countershaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Disassemble/assemble multiplate clutch K1 TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Removing installing servo motor Model 415 with engine 200 with transmission 700.740
Magnet in oil pan new part TRANSMISSION 722.6## ## as of 2871384 as of 17.4.01, 722.7## ## as of 153700 as of 9.7.01
Remove/install shift lock and range selector lever shaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install dual-clutch transmission gear recognition sensor Transmission 700.740 in model 415 with engine 200
Measure and adjust clearance of multiplate clutch K1. TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Assemble countershaft TRANSMISSION 700.720 in MODEL 415
Remove/install transmission with torque converter TRANSMISSION 722.700 in MODEL 168.031 /032 /033 up to 30.6.00 TRANSMISSION 722.701 in MODEL 168.007 /008 up to 30.6.00
Remove/install rpm sensor on dual-clutch transmission Transmission 700.740 in model 415 with engine 200 B109 Rpm sensor 2, transmission input shaft
Measure and adjust clearance of multiplate clutch K3 and K4 TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Removing and installing floor shift TRANSMISSION 722.750 /751 in MODEL 414.700
Disassemble/assemble input shaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install tapered roller bearing outer races in torque converter housing and transmission housing TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install transmission with torque converter TRANSMISSION 722.750 /751 in MODEL 414.700
Remove/install transmission TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Removing and installing ignition lock shift lock cable TRANSMISSION 722.750 /751 in MODEL 414.700
Remove/install clutch housing TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Adjusting range selector cable TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135
Disassemble/assemble front section of transmission housing Transmission 700.720 in model 415
Disassemble/assemble rear section of transmission housing TRANSMISSION 700.710 in MODEL 415
Measuring and adjusting clearance of multiplate clutch K5 TRANSMISSION 722.750 /751 in MODEL 414.700
Remove / install differential TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Disassemble and assemble main shaft TRANSMISSION 700.720 in MODEL 415
Removing installing and adjusting shift and selector cables TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Removing and installing expansion reservoir in torque converter housing TRANSMISSION 722.700 ## up to 0111672 up to 10.9.00 in MODEL 168.031 /032 /033 TRANSMISSION 722.701 ## up to 0111672 up to 10.9.00 in MODEL 168.007 /008
Remove/install rpm sensor on dual-clutch transmission Transmission 700.740 in model 415 with engine 200 B108 Rpm sensor 1, transmission input shaft with direction detection
Remove/install shift module TRANSMISSION 716.508 /509 /513 /514 in MODEL 414.700
Disassembly and assembly multiplate clutch K3 TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Disassemble/assemble transmission TRANSMISSION 700.720 in MODEL 415
Adjust shift lock cables TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135
Fastening transmission on assembly stand TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Measure and adjust clearance of multiplate clutch K2. TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install radial shaft seals of axle shafts (transmission installed) TRANSMISSION 716.508 /509 /513 /514, 722.750 /751 in MODEL 414.700
Remove/install drive shaft radial shaft sealing ring TRANSMISSION 700.720 in MODEL 415
Measure and adjust axial play of reverse idler shaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install anti-friction bearing in transmission housing TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install shaft seals in clutch housing and transmission housing TRANSMISSION 716.508 /509 /513 /514, 722.750 /751 in MODEL 414.700 Getriebe eingebaut
Remove/install park pawl mechanism TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Measure and adjust clearance of multiplate clutch KR. TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install radial shaft seals of axle shafts (transmission removed) TRANSMISSION 716.508 /509 /513 /514, 722.750 /751 in MODEL 414.700
Remove/install selector lever with bearing bracket Model 415 with engine 200 with transmission 700.740
Disassemble and assemble countershaft TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133 TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109 TRANSMISSION 722.702 in MODEL 168.035 /135 …
Remove/install transmission with torque converter TRANSMISSION 722.700 in model 168.031 /032 /033 as of 1.7.00, 168.131 /132 /133 TRANSMISSION 722.701 in model 168.007 /008 as of 1.7.00, 168.006 /009 /109 TRANSMISSION …
Disassemble countershaft TRANSMISSION 700.720 in MODEL 415
Adjusting range selector cable TRANSMISSION 722.750 /751 in MODEL 414.700
Remove/install shaft seals in clutch housing and transmission housing TRANSMISSION 716.508 /509 /513 /514, 722.750 /751 in MODEL 414.700 Getriebe ausgebaut
Remove/install hydraulic hose upstream of clutch slave cylinder Model 470, 471 with engine 699 with transmission 700.78
Remove/install shift cables Transmission 700.780 in model 470, 471 with engine 699
Remove/install gearshift lever with bearing bracket Transmission 700.780 in model 470, 471
Remove/install Hill Start Assist sensor Transmission 700.780 in model 470, 471
Remove/install automatic transmission oil pan Transmission 700.770 in model 470, 471 with engine 699
Remove/install radial shaft sealing ring at input side Transmission 700.780 in model 470, 471
Remove/install radial shaft sealing ring at input side Transmission 700.770 in model 470, 471 with engine 699
Remove/install backup lamp switch Transmission 700.780 in model 470, 471
Tightening procedure for automatic transmission oil pan Transmission 700.770 in model 470, 471 with engine 699
Remove/install radial shaft sealing ring at output side Transmission 700.780 in model 470, 471 with engine 699 with code ZG3 (Engageable all-wheel drive with gear reduction)
Remove/install radial shaft sealing ring at output side Transmission 700.780 in model 470 with engine 200 Transmission 700.780 in model 470, 471 with engine 699 except code ZG3 (Engageable all-wheel drive with gear reduction)
Remove/install radial shaft sealing ring at output side Transmission 700.770 in model 470, 471 with engine 699
Adjust shift cables Transmission 700.780 in model 470, 471
Remove/install electrohydraulic controller unit (transmission installed) Transmission 700.770 in model 470, 471 with engine 699
Remove/install neutral position switch Transmission 700.780 in model 470, 471
Remove/install shift cables Transmission 700.780 in model 470 with engine 200