Service manual Mercedes 715 Transmission

AP26.00-B-2601A Manual transmission – oil change 03.02.2020.pdf
– AP26.00-B-2601A Manual transmission – oil change 03.02.2020
– Transmission 712.612 in model 685, 688
– Transmission 712.612 in model 688
– Transmission 712.62/63
– Transmission 712.622/631 in model 368
– Transmission 715.3 in model 934, 938, 958
– Transmission 715.3 in model 958
– Transmission 715.380 in model 936.315
– except code G02 (Torque converter clutch (WSK))
– Transmission 715.50/51/52/531/535/56/57/585
– Modification notes
– 17.05.2019 Transmission oil BF26.00-B-1001-01GB
– 17.05.2019 Transmission oil BF26.00-B-1002-01GB
– 29.05.2019 Gear oil – Approximate level BF26.00-B-1001-01B
AP26.00-B-2601B Manual transmission – oil change 03.06.2019.pdf
– AP26.00-B-2601B Manual transmission – oil change 03.06.2019
– Transmission 711.622 in model 979.016
– Transmission 715.054 in model 693, 694
– Modification notes
– Transmissions 711, 715 (example)
– 1 Filler plug
AP26.00-B-2601I Manual transmission – oil change 03.02.2020.pdf
– AP26.00-B-2601I Manual transmission – oil change 03.02.2020
– Transmission 710.264/265/266/267
– Transmission 710.264/266
– Transmission 710.271/273/274, 713.70/74/78/80/82
– Transmission 710.272/273, 712.132/31/360/361/363/364, 713.70/74/80/82
– Transmission 712.362/44/451/452, 713.59/70/74/75/78/82 in model 384, 386, 682, 693
– Transmission 712.612/622 in model 384
– Transmission 712.623/632, 715.06
– Transmission 713.59/70/82Transmission 715.054 in model 382, 384, 684
– Transmission 718.07/08/26/69
– Transmission 718.07/19/54/69/73/79
– Transmission 718.19
– Transmission 718.25/54/63/69/73/77/85
– Transmission 718.380/382/383/384
– Transmission 719.690 in model 386
– Modification notes
AP26.00-B-2610B Manual transmission – check oil level correct 27.05.2019.pdf
– AP26.00-B-2610B Manual transmission – check oil level, correct 27.05.2019
– Transmission 712.13/31/36/37/45, 713.70/74/80/82 in model 688, 979
– Transmission 712.36/37/44/45, 713.70/74/78/80/82, 718.25/54/63/69/73/74/77/85 in model 382, 384, 688, 979
– Transmission 712.36/44/45, 713.59/70/74/75/78/82, 718.07/19/54/69/73/79 in model 384, 386, 682, 693, 694, 695
– Transmission 713.59/70/82, 718.07 in model 384, 386
– Modification notes
AP26.00-D-2601A Manual transmission – oil change 25.02.2019.pdf
– AP26.00-D-2601A Manual transmission – oil change 25.02.2019
– Model 636 with transmission 716.65
– Model 638
– except code G40 (Automatic transmission)
– Model 639 with transmission 716.6
– except code MA0 (E-CELL 60 kW)
– Model 667 with transmission 711.11/13/61
– Model 668 with transmission 710.6, 712.21/613/621, 715.00/02/05
– Model 670 with transmission 710.6/84, 711.61, 712.21/613/621, 714.08/50, 715.00/02/05Model 690.6 with transmission 711.620
– Model 901, 902, 903, 904 with transmission 711.60/61
– Model 901, 902, 903, 904, 905 with transmission 711.62
– Modification notes
– Transmission in model 638
– Transmission 716 in model 636, 639
– N26.00-2319-01 S26.00-4500-01
– Transmission 711, 712, 715 (example)
– Transmission 710 (S5-42)
– N26.00-2268-01 N26.00-0286-01
AP26.00-G-2601E Manual transmission – oil change 14.7.10.pdf
– AP26.00-G-2601E Manual transmission – oil change 14.7.10
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– TRANSMISSION 714.100 /120 /140 /143 /160 /161 in MODEL 000.001
– Shown on transmission 715.351
– 1 Oil filler plug
– Shown on transmission 714.140
– 1 Oil filler plug2 Oil drain screw3 Screw plug
– 1 Clean area around oil filler screw (1), oil drain Only change the oil when the transmission
– screw (2 and 6) and screw plug (3) on is at operating temperature.
– transmission housing
– 2 Remove oil filler screw (1)
AP26.00-G-2610E Manual transmission – check oil level correct 14.7.10.pdf
– AP26.00-G-2610E Manual transmission – check oil level, correct 14.7.10
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– TRANSMISSION 714.100 /120 /140 /143 /160 /161 in MODEL 000.001
– Shown on transmission 715.351
– 1 Oil filler plug
– Shown on transmission 714.140
– 1 Clean area around oil filler screw (1) on Check oil level when transmission is cold.
– transmission housing
– 2 Remove oil filler screw (1)
– hole for the oil filler screw (1). Have a container at the ready to collect any discharged transmission oil. Clean oil filler screw (1). Observe Specifications for
– Operating Fluids:
AP26.00-W-2601H Manual transmission – oil change 15.01.2020.pdf
– AP26.00-W-2601H Manual transmission – oil change 15.01.2020
– Transmission 715.310/352/360/371/381/508/518/523/528/571 in model 964
– Transmission 715.310/352/360/371/381/523 in model 963
– Shown on transmission 715.352
– 1 Drain screw
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– system and adjust the quality of the transmission oil filled in if necessary.
– Model 963, 964 with code J6B (Multimedia AP00.20-W-0000-20F
– 3 Unscrew oil filler screw (2) and drain screw Only drain transmission oil when warm.
– (1). Collect transmission oil in suitable container.
– 4 Clean area surrounding drain screw on power Only vehicles with PTO 123/124/125/135.
– Only drain transmission oil when warm.
– Collect transmission oil in suitable container.
AP26.00-W-2601K Manual transmission – oil change 06.04.2017.pdf
– AP26.00-W-2601K Manual transmission – oil change 06.04.2017
– Transmission 710.580/581/582 in model 967
– Transmission 712.614 in model 967
– Transmission 712.671/682 in model 967
– Transmission 715.058/066 in model 967
– Transmission 715.310 in model 967
– Transmission 715.571 in model 967
– Modification notes
– 21.02.2017 Gear oil Transmission 710.580/581/582 BF26.00-N-1001-01M
– Shown on transmission 715.066
– 1 Drain screw
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– 1 Remove bottom cover for transmission
– 2 Clean area around oil filler screw (2) and drain
AP26.00-W-2601L Manual transmission – oil change 23.07.2019.pdf
– AP26.00-W-2601L Manual transmission – oil change 23.07.2019
– Transmission 715.3 in model 956
– Modification notes
– 17.01.2019 Gear oil Transmission 715.352 in model 956 up to BF26.00-N-1001-01L
– 15.05.18
– 17.01.2019 Gear oil Transmission 715.352 in model 956 up to BF26.00-N-1002-01L
– 17.01.2019 Gear oil Transmission 715.352 in model 956 as of BF26.00-N-1002-01N
– 16.05.18
– 17.01.2019 Gear oil Transmission 715.352 in model 956 as of BF26.00-N-1001-01N
– 28.06.2019 Transmission oil specification changed as of 16.05.2018 Operation step 7
– 1 Drain screw
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
AR00.00-W-0020A Remove install sealing rings on connector couplings of hydraulic lines 26.03.2019.pdf
AR25.20-B-0181BD Remove install hydraulic central clutch release bearing 05.03.2020.pdf
– Model 384.0 with transmission 715.062
– Represented on gearbox 715.06
– 1 Transmission removal . AR26.10-B-0020BG
– Topical note Notes on self-locking nuts and bolts AH00.00-N-0001-01A
AR25.20-G-0200A Remove and install clutch throwout lever 16.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– transmission
– Checking
AR25.20-G-0200B Remove and install clutch throwout lever 28.9.10.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– MODEL 000.001 with TRANSMISSION 714.100 /120 /140 /143 /160 /161
– 1 Screw
– 1 Remove transmission or engine See vehicle operator’s manual or repair
– instructions.
AR25.20-G-0200E Remove and install clutch throwout lever 16.3.10-.pdf
– MODEL 000.001 with TRANSMISSION 715.350 /351 /361
– 1 Clutch release lever
– 1 Remove transmission
– 2 Detach clutch release lever (1) from front *BA25.20-N-1001-01L
– section of transmission housing
– Checking
AR25.20-G-0200E Remove and install clutch throwout lever 16.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.350 /351 /361
– 1 Clutch release lever
– 1 Remove transmission
– 2 Detach clutch release lever (1) from front *BA25.20-N-1001-01L
– section of transmission housing
– Checking
AR25.20-W-0182H Remove install pneumatic central clutch release bearing 20.04.2018.pdf
AR26.10-B-0005TF Disassemble transmission 12.03.2020.pdf
– AR26.10-B-0005TF Disassemble transmission 12.03.2020
– Transmission 712.62, 715.05
– W26.10-1104-09
– ending 0041837) transmission “manual” actuation)
– 2 Cover (countershaft) 14 Rear housing cover 25 Retaining pin
AR26.10-B-0005TG Disassemble transmission 12.03.2020.pdf
– AR26.10-B-0005TG Disassemble transmission 12.03.2020
– Transmission 712.63, 715.06
– W26.10-1105-09
– ending 0041837) transmission with “manual”
– actuation)
AR26.10-B-0010TF Assemble transmission 16.03.2020.pdf
– AR26.10-B-0010TF Assemble transmission 16.03.2020
– Transmission 712.62, 715.05
– Modification notes
– 1 Safety lock 13 Cover (only transmission up to 24 Control unit (only with code (GS1)
– number ending 041837) gearbox “manual” actuation)
AR26.10-B-0010TG Assemble transmission 16.03.2020.pdf
– AR26.10-B-0010TG Assemble transmission 16.03.2020
– Transmission 712.63 in model 368, 382, 384, 685
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 712.630/639, 715.06
– Transmission 715.06 in model 382, 384, 685
– Transmission 715.06 in model 695
– Modification notes
– ending 0041837) transmission with “manual”
– actuation)
AR26.10-B-0020-06BA Depressurize pressure reservoir for automatic.pdf
– Transmission 715.062 in model 384.076
– Automatic gear control (AGS)
AR26.10-B-0020A Remove install transmission 12.02.16.pdf
– AR26.10-B-0020A Remove/install transmission 12.02.16
– Manual transmission 712.623, 715.054
– W26.10-0026-09
– 1 Exhaust manifold 10 Transmission shaft
– 2 Torx bolt 11 Torx nuts3 Exhaust manifold 12 Torx bolts
AR26.10-B-0020B Remove install transmission 04.08.2020.pdf
– AR26.10-B-0020B Remove/install transmission 04.08.2020
– Transmission 712.62/63/64/65, 715.054/064
– *
– 3 Torx screws 10 Connector of the socket on transmission
– 4 Supporting bracket 11 Oil piping
– 6 Transmission supporting mounts 13 Control rods7 Connector of speedometer drive plug 14 Support
– Risk of injury Warning caused by body parts being Ensure that no one is within the tilting range of AS60.80-Z-0001-01A
AR26.10-B-0020BG Remove install transmission 04.09.2017.pdf
– AR26.10-B-0020BG Remove/install transmission 04.09.2017
– Transmission 715.062 in model 384.0
– B26.10-0022-09
AR26.10-B-0020C Remove install transmission 12.02.16.pdf
– AR26.10-B-0020C Remove/install transmission 12.02.16
– Manual transmission 715.564
– W26.10-1002-09
– 7 Transmission shaft 17 Oil pipe fastening plate
– 8 Connector of the revs counter drive outlet
AR26.10-B-0020D Remove install transmission 04.08.2020.pdf
– AR26.10-B-0020D Remove/install transmission 04.08.2020
– Transmission 712.623, 715.054
– –
– 8 Transmission shaft to the power takeoff Flechas Assemblage orifices of the exhaust unit’s floor plate
– Risk of fire /risk of explosion due to short No fires, sparks, open flames, or smoking. AS54.10-Z-0001-01A Danger
AR26.10-G-0005A Disassemble transmission 5.3.04.pdf
– AR26.10-G-0005A Disassemble transmission 5.3.04
– MODELS 000.001 with TRANSMISSIONS 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– 7 Front section of transmission 27 Bolt 18 Bearing bolt for shift fork 1./2., 3./4.
– housing and reverse gear
– 8 Sliding block 19 Center section of transmission B3 Countershaft rpm sensor
– 9 Splitter group shift fork housing B47 Transmission fluid temperature
– 10 Oil pipe 20 Tapered roller bearing outer race sensor
– 2 Remove electrical wiring from transmission
– 3 Remove neutral position switch (S9) AR26.19-G-0004A
AR26.10-G-0005C Disassemble transmission 14.6.04.pdf
– AR26.10-G-0005C Disassemble transmission 14.6.04
– MODEL 000.001 with TRANSMISSION 715.521
– G26.10-3181-09
– 7 Front section of transmission reverse shift fork
– housing 19 Center section of transmission
– 8 Sliding blocks housing B3 Countershaft rpm sensor
– 9 Splitter group shift fork 20 Tapered roller bearing outer race B47 Transmission fluid temperature
– 10 Oil pipe 21 Main shaft sensor
– 1 Drain transmission oil
– 2 Remove clutch release lever AR25.20-G-0200B
– 3 Remove electrical wiring from transmission
– 4 Remove neutral position switch (S9) AR26.19-G-0004B
– 5 Remove transmission fluid temperature AR26.19-G-0011B
– sensor (B47)
AR26.10-G-0005E Disassemble transmission 14.7.10.pdf
– AR26.10-G-0005E Disassemble transmission 14.7.10
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– G26.10-3209-09
– Shown on transmission 715.351 without 12 Tapered roller bearing outer race 25 Reverse gear
– performance-optimized Voith retarder 13 Main shaft 26 Range group
– 1 Splitter group shift cylinder 15 Sliding sleeve 29 Transmission output flange
– 2 Shift rod for splitter group 16 Drive shaft
– 3 Front section of transmission 17 Bearing bolt for splitter group shift A90 Gate module
– housing fork A91 Range module
– 7 Countershaft 21 Countershaft brake (VGW-B) B47 Transmission oil temperature sensor
– 8 Tapered roller bearing outer race 22 Drive shaft bearing cap B57 Transmission output rpm sensor
– 9 Shift unit 23 Tapered roller bearing outer race B62 Splitter sensor (SSP)
– 10 Center section of transmission 24 Clutch release lever
– housing
– 1 Drain transmission oil AP26.00-G-2601E
– 2 Remove transmission See vehicle operating/repair instructions.
AR26.10-G-0010A Assemble transmission 27.2.12.pdf
– AR26.10-G-0010A Assemble transmission 27.2.12
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– 16 Center section of transmission 6 Retaining ring 26 Retaining device
– housing 7 Front section of transmission 27 Screw
– 17 Tapered roller bearing outer race housing
– 19 Sliding sleeve 9 Splitter group shift fork B47 Transmission fluid temperature
– 20 Drive shaft 10 Oil pipe sensor
AR26.10-G-0010B Assemble transmission 27.2.12.pdf
– AR26.10-G-0010B Assemble transmission 27.2.12
– MODEL 000.001 with TRANSMISSION 715.560
– G26.50-3215-09
– reverse gear 7 Front section of transmission
– housing 17 Center section of transmission
– housing 8 3rd/4th gear shift rail B3 Countershaft rpm sensor
– 18) in the transmission housing center part bearing outer races (12, 18) must be installed
– (17) in the center section of the transmission
– housing (17) from the inside, and inserted all
AR26.10-G-0010BB Assemble transmission 27.2.12.pdf
– AR26.10-G-0010BB Assemble transmission 27.2.12
– MODEL 000.001 with TRANSMISSION 715.521
– G26.50-3206-09
– 16 Center section of transmission 6 Retaining ring 26 Retaining device
– housing 7 Front section of transmission 27 Screw
– 17 Tapered roller bearing outer race housing
– 19 Sliding sleeve 9 Splitter group shift fork B47 Transmission fluid temperature
– 20 Drive shaft 10 Oil pipe sensor
AR26.10-G-0010E Assemble transmission 27.2.12.pdf
– AR26.10-G-0010E Assemble transmission 27.2.12
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– G26.10-3209-09
– Shown on transmission 715.351 without 12 Tapered roller bearing outer race 25 Reverse gear
– retarder 13 Main shaft 26 Range group
– 1 Splitter group shift cylinder 15 Sliding sleeve 29 Transmission output flange
– 2 Shift rod for splitter group 16 Drive shaft
– 3 Front section of transmission 17 Bearing bolt for splitter group shift A90 Gate module
– housing fork A91 Range module
AR26.10-W-0001-01HE Attaching and detaching mounting device on.pdf
– transmission
– Transmission 715.3/5
– 715 589 08 31 00
– 1 Fasten carriers of assembly device (1) to support arms (3) on transmission.
– Fasten carriers of
– onto support arms (3).Otherwise, the transmission may tilt over.
– 2 Fasten reinforcement (2) to
AR26.10-W-0005HA Disassemble transmission 06.03.2019.pdf
– AR26.10-W-0005HA Disassemble transmission 06.03.2019
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.10-1137-09
– Shown on transmission 715.352
– 1 Compressed-air line 13 Shift unit 25 Bearing pin
– 2 Splitter group cylinder 14 Reverse gear 26 Tapered roller bearing outer race3 Splitter group shift rod 15 Center section of transmission 27 Tapered roller bearing outer race
– housing
– 4 Front section of transmission 16 Shim 28 Countershaft brake
AR26.10-W-0005HB Disassemble transmission 07.07.2016.pdf
– AR26.10-W-0005HB Disassemble transmission 07.07.2016
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– W26.10-1138-09
– Shown on transmission 715.371 without transmission-independent power take-off (live power take-off)
– 1 Compressed-air line 14 Center section of transmission 27 Tapered roller bearing outer race
– housing
– 3 Splitter group shift rod 16 Reverse gear cap 29 Countershaft brake4 Front section of transmission 17 Range group 30 Drive shaft bearing cap
AR26.10-W-0005HC Disassemble transmission 07.07.2016.pdf
– AR26.10-W-0005HC Disassemble transmission 07.07.2016
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.10-1170-09
– 1 Compressed-air line 15 Rear section of transmission 29 Drive shaft bearing cap
– housing
– 4 Front section of transmission 18 Output flange 32 Slide hammer puller
AR26.10-W-0005HF Disassemble transmission 07.07.2016.pdf
– AR26.10-W-0005HF Disassemble transmission 07.07.2016
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– W26.10-1200-09
– Shown on transmission without transmission-independent power take-off (live PTO)
– 1 Compressed-air line 14 Center section of transmission 27 Tapered roller bearing outer race
– housing
– 4 Front section of transmission 17 Range group 30 Drive shaft bearing cap
AR26.10-W-0010HA Assemble transmission 06.03.2019.pdf
– AR26.10-W-0010HA Assemble transmission 06.03.2019
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.10-1139-09
– Shown on transmission 715.352
– 1 Compressed-air line 13 Shift unit 24 Shift
– 2 Splitter group cylinder 14 Reverse gear 25 Bearing pin3 Splitter group shift rod 15 Center section of transmission 26 Tapered roller bearing outer race
– housing
– 4 Front section of transmission 16 Shim 27 Tapered roller bearing outer race
AR26.10-W-0010HB Assemble transmission 21.07.2017.pdf
– AR26.10-W-0010HB Assemble transmission 21.07.2017
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– W26.10-1140-09
– Shown on transmission 715.371 without transmission-independent power take-off (live power take-off)
– 1 Compressed-air line 13 Shift unit 25 Shift
– 2 Splitter group cylinder 14 Center section of transmission 26 Bearing pin
– housing
– 3 Splitter group shift rod 15 Reverse gear 27 Tapered roller bearing outer race4 Front section of transmission 16 Reverse gear cap 28 Tapered roller bearing outer race
AR26.10-W-0010HC Assemble transmission 09.11.2017.pdf
– AR26.10-W-0010HC Assemble transmission 09.11.2017
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.10-1178-09
– 1 Compressed-air line 15 Rear section of transmission 29 Drive shaft bearing cap
– housing
– 4 Front section of transmission 18 Output flange 34 Pulse wheel
AR26.10-W-0010HF Assemble transmission 21.07.2017.pdf
– AR26.10-W-0010HF Assemble transmission 21.07.2017
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
– 27.11.2013 Bolt, transmission housing front section to transmission Transmission 715.523 BA26.40-N-1001-01HA
– housing center section
– Shown on transmission without transmission-independent power take-off (live PTO)
– 1 Compressed-air line 13 Shift unit 25 Shift
– 2 Splitter group shift cylinder 14 Center section of transmission 26 Bearing pin
– housing
AR26.10-W-0022AF Remove install transmission downwards 25.10.2019.pdf
– AR26.10-W-0022AF Remove/install transmission downwards 25.10.2019
– Transmission 715.352 in model 956 with engine 936.9
– with code G2B (Transmission G 211-12/14.93-1.0)
– Modification notes
– 21.10.2019 Check transmission control unit (TCM) (A5) for modified Operation step 33
– software added.
AR26.10-W-0022HA Remove install transmission downwards 10.08.2020.pdf
– AR26.10-W-0022HA Remove/install transmission downwards 10.08.2020
– Transmission 715.352 in model 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Except for vehicles with 4 axles
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Shown on transmission 715.352
– 1 Bolts 5 Compressed-air line 10 Coolant line (only on vehicles with
AR26.10-W-0022HB Remove install transmission downwards 10.08.2020.pdf
– AR26.10-W-0022HB Remove/install transmission downwards 10.08.2020
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– except code G3Y (Turbo retarder clutch)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
AR26.10-W-0022HBA Remove install transmission downwards 10.08.2020.pdf
– AR26.10-W-0022HBA Remove/install transmission downwards 10.08.2020
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
AR26.10-W-0022HCA Remove install transmission downwards 10.08.2020.pdf
– AR26.10-W-0022HCA Remove/install transmission downwards 10.08.2020
– Transmission 715.310 in model 963
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.10-1173-09
– 1 Transmission 5 Supporting arm A5 Transmission control (TCM)
– control unit
AR26.10-W-0023HA Remove install transmission upwards 11.08.2020.pdf
– AR26.10-W-0023HA Remove/install transmission upwards 11.08.2020
– Transmission 715.352 in model 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.10-1129-09
– Shown on transmission 715.352
– 1 Bolts 5 Compressed-air line 10 Coolant line (only on vehicles with
– 2 Coolant feed pipe (only on vehicles 6 Electrical wiring harness (vehicle A5 Transmission control (TCM) control
– with code B3H (Secondary water wiring harness) unitretarder))
AR26.10-W-0023HB Remove install transmission upwards 11.08.2020.pdf
– AR26.10-W-0023HB Remove/install transmission upwards 11.08.2020
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– except code G3Y (Turbo retarder clutch)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– except code G3Y (Turbo retarder clutch) except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
AR26.10-W-0023HBA Remove install transmission upwards 11.08.2020.pdf
– AR26.10-W-0023HBA Remove/install transmission upwards 11.08.2020
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– with code G3Y (Turbo retarder clutch)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– 1 Transmission
– 2 Propeller shaft
AR26.10-W-0023HCA Remove install transmission upwards 11.08.2020.pdf
– AR26.10-W-0023HCA Remove/install transmission upwards 11.08.2020
– Transmission 715.310 in model 963
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.10-1173-09
– 1 Transmission 5 Supporting arm A5 Transmission control (TCM)
– control unit
AR26.18-G-0001E Detach attach compressed air line 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– with compressed air connector “VOSS 230”
AR26.18-G-1000A Remove install splitter group shift cylinder 11.11.11.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
AR26.18-G-1000B Remove install splitter group shift cylinder 11.11.11.pdf
– MODEL 000.001 with TRANSMISSION 715.521
– 1 Retaining ring
AR26.18-G-1000E Remove install splitter group shift cylinder 9.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Circlip
AR26.18-G-2001E Disassembling and assembling gear shift cylinder 9.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Housing
AR26.18-G-3100A Removing installing range group shift cylinder 9.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.18-G-3100B Remove install range group shift cylinder 9.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– 1 Sealing ring
– transmission with 2 bolts in a cross pattern
– and press out the shift piston using
AR26.18-W-1001HA Remove install splitter box cylinder 06.03.2019.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0) except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– except code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
AR26.18-W-1001HB Remove install splitter box cylinder 20.08.2018.pdf
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code G2E (Transmission G 281-12/14.93-1.0) with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– with code G2F (Transmission G 330-12/11.63-0.77) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.18-W-2060HA Remove install rapid exhaust valve of countershaft brake VGW-B 01.07.2014.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– TRANSMISSION 715.352
– with CODE G2B (Transmission G 211-12/14.93-1.0)
– TRANSMISSION 715.360
– with CODE G2C (Transmission G 230-12/11.7-0.78)
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0) without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– without CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– Shown on transmission 715.371
– 1 Retaining ring
AR26.18-W-2060N Remove install rapid exhaust valve of countershaft brake VGW-B 07.07.2016.pdf
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code G2E (Transmission G 281-12/14.93-1.0) with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– with code G2F (Transmission G 330-12/11.63-0.77) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.18-W-3100HA Remove install range group cylinder 13.05.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
AR26.19-B-0003B Remove install neutral position switch 09.03.2020.pdf
– Transmission 712.64 (except 712.647), 715.054/064
– Transmission 712.64
– Transmission 712.65, 715.054/064
– S9 Neutral position switch
AR26.19-B-0010B Remove install reverse gear switch 05.03.2020.pdf
– Transmission 712.620/625/634 in model 375, 958, 970, 972, 976
– Transmission 712.622/623/631/632/641, 715.054/064 in model 368.### #D, 382.### #D, 384.### #D, 684.### #D
– Transmission 712.622/623/631/632/641, 715.054/064 in model 382.### #B, 384.### #B, 684.### #B
– Transmission 712.623/632/652/653, 715.054/064 in model 693.### #B, 694.### #B, 695.### #B
– Transmission 712.623/632/652/653, 715.054/064 in model 693.### #D, 694.### #D, 695.### #D
– Transmission 712.641 in model 684.### #B
– Transmission 712.641 in model 684.### #D
– S7 Reverse gear switch
AR26.19-G-0004A Removing and installing neutral position switch 8.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.19-G-0004B Removing installing neutral position switch 7.6.04-.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– S9 Neutral position switch
AR26.19-G-0004B Removing installing neutral position switch 7.6.04.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– S9 Neutral position switch
AR26.19-G-0005A Removing installing countershaft rpm sensor 8.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.19-G-0005B Remove install countershaft rpm sensor 14.6.04.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– B3 Countershaft rpm sensor
AR26.19-G-0006B Remove install speed sensor 4.11.05.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– B17 Vehicle speed sensor
AR26.19-G-0006E Remove install speed sensor 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.351
– B17 Vehicle speed sensor
AR26.19-G-0007E Remove install splitter group solenoid valve 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.19-1032-09
AR26.19-G-0008E Remove install gear solenoid valve 9.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.19-1062-09
AR26.19-G-0009E Remove install gate solenoid valve 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.19-1031-09
AR26.19-G-0011A Removing installing transmission oil temperature sensor 8.3.04.pdf
– AR26.19-G-0011A Removing/installing transmission oil temperature sensor 8.3.04
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
– B47 Temperature sensor for transmission oil
– G26.19-3118-01
– B47 Temperature sensor for transmission oil *BA26.19-N-1002-01J
– Sensors
AR26.19-G-0011B Remove install transmission oil temperature sensor 14.6.04.pdf
– AR26.19-G-0011B Remove/install transmission oil temperature sensor 14.6.04
– MODEL 000.001 with TRANSMISSION 715.521 /560
– B47 Transmission fluid temperature sensor
– G26.19-3118-01
– 1 Disconnect wiring plug from transmission oil
– temperature sensor (B47)
– 2 Remove transmission fluid temperature *BA26.19-N-1002-01J
– sensor (B47)
AR26.19-G-0012E Remove install range solenoid valve 9.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Screw
AR26.19-G-0013E Remove install countershaft brake solenoid valve 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.19-1030-09
AR26.19-G-0016E Remove install rpm sensor for transmission output speed 17.4.08.pdf
– AR26.19-G-0016E Remove/install rpm sensor for transmission output speed 17.4.08
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.350
– B57 Transmission output rpm sensor
– W26.19-1088-01
– transmission output speed rpm sensor (B57)
– 2 Unscrew transmission output speed rpm *BA26.19-N-1006-01KL
– sensor (B57)
AR26.19-G-0017E Remove install transmission oil temperature sensor 14.7.10.pdf
– AR26.19-G-0017E Remove/install transmission oil temperature sensor 14.7.10
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.350
– B47 Transmission oil temperature sensor
– W26.19-1089-01
– transmission oil temperature sensor (B47)
– 2 Remove transmission oil temperature sensor Collect transmission oil which flows out in
– (B47) a suitable vessel.
AR26.19-G-0018E Remove install countershaft speed sensor 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.350
– B3 Countershaft rpm sensor
AR26.19-G-0200B Removing and installing the backup light switch 8.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.19-G-0200BB Backup light switch removal and installation 15.6.04-.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– S7 Reverse gear switch
AR26.19-G-0200BB Backup light switch removal and installation 15.6.04.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– S7 Reverse gear switch
AR26.19-W-0017HA Remove install transmission oil temperature sensor 23.07.2019.pdf
– AR26.19-W-0017HA Remove/install transmission oil temperature sensor 23.07.2019
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– with code G5G (Mercedes PowerShift 3)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78) with code G5G (Mercedes PowerShift 3)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
AR26.19-W-0018HA Remove install countershaft speed sensor 24.04.2015.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
AR26.19-W-0018HC Remove install countershaft speed sensor 24.4.15.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Modification notes
– 1 Remove engine or transmission Select procedure according to design and
– accessibility.
– 2 Drain transmission oil
– Model 963, 964 AP26.00-W-2601H
AR26.19-W-0028HA Remove install pulse wheel for travel and speed sensor 23.07.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– 1 Output flange
AR26.19-W-0028HB Remove install pulse wheel for travel and speed sensor 28.03.2014.pdf
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– TRANSMISSION 715.508
– with CODE G1H (Transmission G 230-16/14.2-0.83)
– TRANSMISSION 715.518
– with CODE G1I (Transmission G 231-16/17.0-1.0)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– TRANSMISSION 715.528
– with CODE G1J (Transmission G 260-16/11.7-0.69)
– TRANSMISSION 715.571
– with CODE G1F (Transmission G 141-9/14.57-1.0)
– Shown on transmission 715.371
– 1 Output flange
AR26.19-W-0028HC Remove install pulse wheel for travel and speed sensor 29.08.2013.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– 1 Output flange
AR26.19-W-0501HA Remove install main shaft rpm sensor 06.03.2019.pdf
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– 1 Electrical connector
– cable gland (2) transmission housing
– 7 Connect electrical connector (1)
AR26.19-W-0501HB Remove install main shaft rpm sensor 24.04.2015.pdf
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
AR26.19-W-0501HC Remove install main shaft rpm sensor 24.4.15.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Modification notes
– transmission housing
– 3 Expose electrical line (2)
AR26.19-W-0518HA Remove install travel and speed sensor 09.11.2017.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– Transmission 715.571
AR26.20-G-1004E Remove install gear module 12.4.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Electrical connector
AR26.20-G-1005E Remove install gate module 12.4.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Compressed-air line
– transmission wiring harness
– 4 Disconnect electrical connector of vehicle If the transmission is installed in the
– wiring harness from electrical connection (3) vehicle.
AR26.20-G-1006E Remove install range module 9.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Electrical connector
AR26.20-G-1020E Remove install gear sensor 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Screw
AR26.20-G-1021E Remove install gate sensor 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 O-ring
AR26.20-G-1022E Remove install range sensor 9.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Screw
AR26.20-G-1023E Remove install splitter sensor 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.350
– B62 Splitter sensor (SSP)
AR26.20-G-2000E Remove install gear control GS control unit 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.20-1099-09
AR26.21-W-0005-01A Tightening procedure of transmission control.pdf
– AR26.21-W-0005-01A Tightening procedure of transmission control
– unit (TCM)
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Only for transmission positioner from Festo company
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366 in model 800
– Festo transmission positioner
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
AR26.21-W-0005H Remove install transmission control unit TCM 25.10.2019.pdf
– AR26.21-W-0005H Remove/install transmission control unit (TCM) 25.10.2019
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
– 21.10.2019 Check transmission control unit (TCM) (A5) for modified Operation step 11
– software added.
– Shown on transmission 715.352 with transmission positioner
– (Y900) from the company Wabco
– 1 Electrical connection (transmission wiring harness)
– 2 Electrical connector (vehicle wiring harness)
– A5 Transmission control (TCM) control unit
– Y900 Transmission positioner
– W26.20-1295-11
AR26.21-W-0006H Remove install transmission positioner 25.10.2019.pdf
– AR26.21-W-0006H Remove/install transmission positioner 25.10.2019
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Only for transmission positioner from Festo company
– Transmission 715.352 in model 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)Only for transmission positioner from Festo company
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)Only for transmission positioner from Festo company
AR26.21-W-0006HA Remove install transmission positioner 25.10.2019.pdf
– AR26.21-W-0006HA Remove/install transmission positioner 25.10.2019
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Only for transmission positioner from the company Wabco
– Transmission 715.352 in model 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)Only for transmission positioner from the company Wabco
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)Only for transmission positioner from the company Wabco
AR26.21-W-0504HA Remove install range group travel sensor 28.06.2016.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
– Shown on transmission 715.371
– 1 Range group cylinder
AR26.30-B-0330B Remove install clutch housing 12.02.16.pdf
– Manual transmission 715.504 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48)
– Manual transmission 715.504 with CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– 1 Auxiliary power takeoff
AR26.30-G-1000-01A Determine size of shim for input shaft bearing.pdf
– Number Designation Transmission
– 715.501/511 with code GS3
AR26.30-G-1000-01B Determining shim for input shaft bearing cover.pdf
– Number Designation Transmission Transmission
– 715.521 in 715.560 in model 000.001 model 000.001
– The splitter group must be engaged on Transmission 715.521.
– 2 Slacken both screws on the strip clamps (1) again and tighten to 10 Nm .
AR26.30-G-1000-02A Determine size of shim for countershaft.pdf
– Number Designation Transmission
– 715.501/511 with code GS3
AR26.30-G-1000-02B Determining shim for countershaft bearing.pdf
– Number Designation Transmission Transmission
– 715.521 in 715.560 in model 000.001 model 000.001
AR26.30-G-1010A Removing installing bearing cap of input shaft and countershaft 2.3.12.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.30-G-1010B Removing and installing input shaft and countershaft bearing covers 2.3.12.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– 1 Countershaft bearing cover
AR26.30-G-1020E Remove install input shaft bearing cap 12.4.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.350
– 1 Drive shaft bearing cap
AR26.30-G-3000-01A Removing installing radial shaft seal in.pdf
– Number Designation Transmission
– 715.501/511 with code GS3
AR26.30-G-3000-01B Remove install radial shaft seal in housing.pdf
– Number Designation Transmissions
– 715.521/560 in model 000.001
AR26.30-G-3000-02A Determining shim for housing cover of output.pdf
– Number Designation Transmission
– 715.501/511 with code GS3
AR26.30-G-3000-02B Determining shim for housing cover of output.pdf
– Number Designation Transmission Transmission
– 715.521 in 715.560 in model 000.001 model 000.001
AR26.30-G-3000A Removing and installing housing cover at output end 10.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
– 1 Remove transmission output flange AR26.40-G-0007A
– 2 Remove road speed pick-up (B17) *BA26.19-N-1001-01J
AR26.30-G-3000B Remove install housing cover at output side 10.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– 1 Shim
– 1 Remove transmission output flange AR26.40-G-0007B
– 2 Remove road speed pick-up (B17). AR26.19-G-0006B
AR26.30-G-3001A Removing and installing rear end cover 8.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.30-G-3001B Remove install rear end cover 12.4.10.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– 1 Gasket
AR26.30-G-3001E Remove install rear end cover 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– Shown on transmission 715.351
– 1 Oil pump drive shaft
AR26.30-W-1020HA Remove install input shaft bearing cap 23.07.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
AR26.30-W-1020HAA Remove install input shaft bearing cap 07.07.2016.pdf
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code G2E (Transmission G 281-12/14.93-1.0) with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– with code G2F (Transmission G 330-12/11.63-0.77) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.30-W-1020HC Remove install input shaft bearing cap 23.04.2019.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Modification notes
AR26.30-W-3001HA Remove install rear end cover 06.03.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– Transmission 715.571
AR26.30-W-3001HC Remove install rear end cover 30.07.2013.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– W26.30-1030-09
– bypass valve (only on vehicles N6Z (Transmission cooling))
– with code N6Z (Transmission cooling))
– 2 Oil pump gear (driven) 6 Pressure relief valve (only on Pfeil B Markings
– (Transmission cooling))
– 3 Oil pump gear (powered)
– 1 Drain and collect transmission oil
– Model 963, 964 AP26.00-W-2601H
– Collect transmission oil in suitable
– container.
AR26.31-G-0100-02OH Block shift rod of range group shift piston with.pdf
– Transmission 715.350/351/361 in model 000.001
– Transmission 715.366/537/538/539 in model 800
– Transmission 715.501/511 in model 000.001
– with code GS3 (Hydraulic gearshift)
– Transmission 715.536 in model 800.1
– Transmission 715.536 in model 800.2/3
– 715 589 01 40 00
AR26.31-G-0100A Removing and installing range group shift piston 21.02.2018.pdf
– Model 000.001 with transmission 715.501/511
– with code GS3 (Hydraulic gearshift)
– 1 Shift piston 3 Transmission housing 5 Shift rod
– 2 Tappet 4 Holding device
AR26.31-G-0100E Removing and installing range group shift piston 21.02.2018.pdf
– Transmission 715.350/351/361 in model 000.001
– Modification notes
– 1 Shift piston 3 Transmission housing 5 Shift rod
– 2 Tappet 4 Holding device
AR26.31-G-0101A Removing and installing radial shaft seal and pilot bushing for range group shift 27.2.12.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511with CODE (GS3) “Hydraulic” transmission shiftwith CODE (IY2) Hydraulic fluid as per sheet 345.0
– 1 Range group shift cylinder
AR26.31-G-0101B Removing and installing radial shaft seal and pilot bushing for range group shift 27.2.12.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– 1 Range group shift cylinder
AR26.31-G-0101E Remove install radial shaft seal and pilot bushing for range group shift rod 27.2.12.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Bleed nozzle
– 14.10.08 Value changed: Transmission housing rear section to Transmission 715.350 *BA26.40-N-1002-01KL
– transmission housing center part
– Removing
AR26.31-G-3100-01A Determining shim for bearing of range group.pdf
– Number Designation Transmission
– 715.501/511 with code GS3 and code IY2
– (2) in rear section of transmission housing (3) as far as the axial stop.
– 2 Place rear section of transmission
– housing (3) with ball bearing (2) on a
AR26.31-G-3100-01B Determining shim for bearing of range group.pdf
– Number Designation Transmission Transmission
– 715.521 in 715.560 in model 000.001 model 000.001
– (2) in rear section of transmission housing (3) as far as the axial stop.
– 2 Place rear section of transmission
– housing (3) with ball bearing (2) on a
AR26.31-G-3101E Remove disassemble range group 14.7.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.31-1023-09
– Shown on transmission 715.350 without 10 Retaining ring 23 Rear end cover (with oil pump drive
– performance-optimized Voith retarder shaft attached) 11 Ball bearing
– 25 Shim 13 Rear section of transmission housing
– 1 Pilot bushing 26 Spring 14 Shift rod (with shift piston attached)
– 6 Screw plug 31 Bleed nozzle 19 Transmission output flange
– 7 Planetary gear set with shift 20 O-ring
– 8 Shift fork B57 Transmission output rpm sensor 22 Stretch bolt
– 9 Carrier ring
– 1 Drain transmission oil AP26.00-G-2601E
– 2 Remove retarder Only carry out on vehicles with
– 3 Remove transmission output flange (19) AR26.40-G-0007E
– 4 Remove radial shaft sealing ring (18) AR26.40-G-3840E
AR26.31-G-3102A Install range group 11.11.11.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– 1 Rear section of transmission housing 10 Screw 15 Sun gear
– 5 Shim 11 Spring 16 Planetary gear set with shift
– 5 Position rear section of transmission housing *BR00.45-Z-1015-01A Coat sealing surfaces with sealing
– (1) against main transmission housing compound.
AR26.31-G-3102B Install range group 11.11.11.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– G26.31-3105-09
– 1 Rear section of transmission housing 10 Screw 15 Sun gear
– 5 Shim 11 Spring 16 Planetary gear set with shift
– 5 Position rear section of transmission housing *BR00.45-Z-1015-01A Coat sealing surfaces with sealing
– (1) against main transmission housing compound.
– Guide bolt for installing range group WF58.50-N-3100-01A
AR26.31-G-3102E Install range group 14.7.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– G26.31-3111-09
– Shown on transmission 715.350 without 4 Screw plug 10 Rear end cover (with oil pump drive
– performance-optimized Voith retarder shaft attached) 5 Bleed nozzle
AR26.31-G-3201A Assembling range group 27.2.12.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– 9 Rear section of transmission housing18 Output flange
– Install
– transmission (oil side).
– Coat the extruded edge seal on the radial oil
AR26.31-G-3201B Assembling range group 27.2.12.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– G26.31-3102-09
– 9 Rear section of transmission housing
– Install
– transmission (oil side).Coat the extruded edge seal on the radial oil
– seal (10) with synthetic grease.
AR26.31-G-3201E Assembling range group 27.2.12.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.31-1022-09
– 4 Shift rod 18 Transmission output flange B17 Vehicle speed sensor
– 5 Shift piston 19 O-ring B57 Transmission output rpm sensor
– 6 O-ring 20 Thrust washer
– 9 Rear section of transmission housing 22 bearing bolt B Bore
– 10 Radial shaft seal 23 Screw plug
AR26.31-W-0100-02AE Block shift rod of range group shift piston with.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
AR26.31-W-0100HA Removing and installing range group shift piston 04.03.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
AR26.31-W-0103A Modify range group cylinder 05.02.2018.pdf
– Transmission 715.352 in model 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– When changing from Festo company to Wabco company
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)When changing from Festo company to Wabco company
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
AR26.31-W-3100HA Remove install range group 12.08.2020.pdf
– Transmission 715.352 in model 956
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.352 in model 963, 964
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.31-1030-09
– 1 Transmission 7 Carrier ring 13 Spring
– 2 Catch bolt 8 Oil pump 14 Oil strainer
AR26.31-W-3100HB Remove install range group 12.08.2020.pdf
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– W26.31-1031-09
– 1 Transmission 7 Carrier ring 13 Spring
– 2 Catch bolt 8 Oil pump 14 Oil strainer
AR26.31-W-3100HD Remove install range group 13.08.2020.pdf
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– 1 Transmission
– 2 Catch bolt
AR26.31-W-3101KB Remove disassemble range group 7.8.08.pdf
– TRANSMISSION 715.350 with CODE (GE3) Mercedes PowerShift
– TRANSMISSION 715.350 with CODE (GE7) Mercedes PowerShift 2
– W26.31-1023-09
– Shown on transmission with code (GE3)
– Mercedes PowerShift
– 2 Sun gear 13 Rear section of transmission housing 25 Shim
– 3 Circlip 14 Shift piston with piston rod 26 Spring4 Catch bolt 15 O-ring 27 Oil strainer
– 10 Circlip 22 Stretch bolt B57 Transmission output rpm sensor
– 11 Ball bearing 23 End cover
AR26.31-W-3200HA Disassemble assemble range group 23.07.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– G26.31-3122-09
AR26.31-W-3200HB Disassemble assemble range group 10.5.12.pdf
– TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0
– TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
– TRANSMISSION 715.523 with CODE (G2D) Transmission G 280-16/11.7-0.69
– W26.31-1029-09
AR26.31-W-3200HD Disassemble assemble range group 01.04.2014.pdf
– TRANSMISSION 715.508
– with CODE G1H (Transmission G 230-16/14.2-0.83)
– TRANSMISSION 715.518
– with CODE G1I (Transmission G 231-16/17.0-1.0)
– TRANSMISSION 715.528
– with CODE G1J (Transmission G 260-16/11.7-0.69)
– W26.31-1029-09
AR26.35-G-0100A Remove install splitter group shift piston 11.11.11.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
AR26.35-G-0100B Remove install splitter group shift piston 11.11.11.pdf
– MODEL 000.001 with TRANSMISSION 715.521
– 1 Shift piston
AR26.35-G-0100E Remove install splitter group shift piston 16.6.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Shift piston
AR26.35-G-1000-01A Determine shim for shift piston of cascade box.pdf
– Number Designation Transmissions
– 715.501/511 with code GS3 and code IY2
AR26.35-G-1000-01B Determine shim for shift piston of cascade box.pdf
– Number Designation Transmissions
– 715.521/560 in model 000.001
AR26.35-G-1000-01E Determine shim for shift piston of splitter.pdf
– Number Designation Transmission Transmissions
– 715.351/361715.350
– transmission housing up to collar (2) of shift rod (1).
– W26.35-0001-01
AR26.35-G-1000-02A Determine shim for cylindrical actuator of.pdf
– Number Designation Transmissions
– 715.501/511 with code GS3
AR26.35-G-1000-02B Determine shim for cylindrical actuator of.pdf
– Number Designation Transmissions
– 715.521/560 in model 000.001
AR26.35-G-1000-02E Determine shim for cylindrical actuator of.pdf
– Number Designation Transmission Transmissions
– 715.351/361715.350
AR26.35-G-1000-03A Removing and installing radial shaft seal and.pdf
– transmission housing front section
– Inspection and adjustment data: splitter unit (splitter group)
– Number Designation Transmissions
– 715.501/511 with code GS3
AR26.35-G-1000-03B Removing and installing radial shaft seal and.pdf
– transmission housing front section
– Inspection and adjustment data: splitter unit (splitter group)
– Number Designation Transmissions
– 715.521/560 in model 000.001
AR26.35-G-1000-04E Install shift rod of splitter group.pdf
– Number Designation Transmission
– 715.350
– BA26.35-N-1001-01KL Shift fork bearing bolt to transmission housing Nm 120
– Splitter group
– Number Designation Transmissions
– 715.351/361
– Housing
– Number Designation Transmission Transmissions
– 715.350 715.351/361
– BA26.40-N-1009-01KL Splitter group shift lock to transmission housing Nm 30 30
– Repair materials
AR26.35-G-1000A Remove install shift rod and shift piston for splitter group 27.2.12.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– transmission and twist the shift rod (4).
– 5 Detach rubber sealing ring (3)
AR26.35-G-1000B Remove install shift rod and shift piston for splitter group 27.2.12.pdf
– MODEL 000.001 with TRANSMISSION 715.521
– 1 Shift cylinder
– transmission and twist the shift rod (4).
– 5 Detach rubber sealing ring (3)
AR26.35-G-1000E Remove install shift rod and shift piston for splitter group 27.2.12.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.35-1013-09
AR26.35-W-0001-01HA Determine shim for shift piston of splitter group.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366/537/538/539 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– Test and adjustment values for splitter group
– Number Designation Transmission Transmission
– 715.310 715.352/360
AR26.35-W-0001-02HA Determine shim for shift cylinder of splitter.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Test and adjustment values for splitter group
– Number Designation Transmission Transmission
– 715.310 715.352/360
AR26.35-W-0001HA Remove install shift piston of splitter group 23.07.2019.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– Shown on transmission without
– transmission-independent power take-off
AR26.40-B-0007TA Remove install transmission output flange 01.02.2019.pdf
– AR26.40-B-0007TA Remove/install transmission output flange 01.02.2019
– Transmission 715.351/372/382/388/527/531 in model 958.4
– Transmission 715.504 in model 696
– Transmission 715.517/535/567/568 in model 958.2
– Transmission 715.563/565 in model 693
– Modification notes
– 12.12.2018 Flange attachment Transmission 715.351/372/380/382/388 BA26.30-B-1003-01L
– 1 Output flange (series version)
AR26.40-B-2470-01A Detach front section of transmission housing.pdf
– AR26.40-B-2470-01A Detach front section of transmission housing
– Transmission 712.61 in model 384
– Transmission 712.61 in model 979
– Transmission 712.622/631 in model 368
– Transmission 712.623/632 in model 368, 382, 384, 693, 694, 695
– Transmission 712.63 in model 958
– Transmission 712.631 in model 384.334, 685.282/284/289/290
– Transmission 715.05 in model 382
– Transmission 715.05 in model 384
– Transmission 715.05 in model 693Transmission 715.05 in model 694
– 715 589 01 35 00 715 589 02 33 14 652 589 00 33 00
AR26.40-B-2470-04A Attach detach support plate at transmission.pdf
– AR26.40-B-2470-04A Attach/detach support plate at transmission
– Transmission 712.622/631 in model 368, 685.282/284/289/290
– Transmission 712.64 in model 382, 384, 684
– Transmission 712.64 in model 684
– Transmission 712.65 in model 695
– Transmission 715.054 in model 382, 384, 684
– Transmission 715.054 in model 693, 694
– 715 589 01 63 00
AR26.40-B-2470F Remove and install front section of transmission housing 12.03.2020.pdf
– AR26.40-B-2470F Remove and install front section of transmission housing 12.03.2020
– Transmission 712.62
– without clutch hydraulic drive bearing
– Transmission 712.64
– Transmission 715.054
AR26.40-B-2470J Remove and install front section of transmission housing 12.03.2020.pdf
– AR26.40-B-2470J Remove and install front section of transmission housing 12.03.2020
– Transmission 712.62
– with clutch hydraulic drive bearing
– Transmission 712.64
– Transmission 715.054
AR26.40-B-2475-02A Detaching rear part of transmission housing.pdf
– AR26.40-B-2475-02A Detaching rear part of transmission housing
– pulling off/pulling on device
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623/632 in model 368, 382, 384
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334
– Modification notes
AR26.40-B-2475-04A Installing rear part of transmission housing.pdf
– AR26.40-B-2475-04A Installing rear part of transmission housing
– pulling off/pulling on device
– Transmission 712.612 in model 688, 979
– Transmission 712.612/623/632 in model 368, 382, 384, 685, 688
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334
– Modification notes
– 1 Heat the main bearing of the main shaft at the rear of the transmission (1) to 80°
– C.
AR26.40-B-2475D Remove install rear section of transmission housing 12.05.2020.pdf
– AR26.40-B-2475D Remove/install rear section of transmission housing 12.05.2020
– Transmission 712.62, 715.054
– Transmission 712.62/64, 715.054
– Transmission 712.62
– Transmission 712.64
– W26.40-1003-09
– 1 Remove the front part of the transmission Transmission without clutch hydraulic central AR26.40-B-2470F
– drive.
– Transmission with clutch hydraulic central AR26.40-B-2470J
AR26.40-B-2476TB Disassemble assemble rear section of transmission housing 16.03.2020.pdf
– AR26.40-B-2476TB Disassemble/assemble rear section of transmission housing 16.03.2020
– Transmission 712.620/630, 715.05/06
– Transmission 712.630/639, 715.06
– Transmission 715.05/06
– Transmission 715.06
– 1 Lock-ring
– 1 Disassemble the gearbox Transmission 712.620, 715.05 AR26.10-B-0005TF
– Transmission 712.630/639, 715.06 AR26.10-B-0005TG
– 2 Remove locking ring (1)
AR26.40-B-3257A Remove install input shaft radial shaft sealing ring 09.03.2020.pdf
– Transmission 712.62 in model 368, 382, 384
– Without hydraulic clutch actuation bearing
– Transmission 712.62 in model 693, 694
– Transmission 712.62 in model 958
– Transmission 712.63 in model 368, 382, 384, 685.282/284/289/290
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 715.05 in model 382, 384
– Transmission 715.05 in model 693, 694
– Transmission 715.06 in model 382, 384
– Transmission 715.06 in model 695
AR26.40-B-3257B Remove install input shaft radial shaft sealing ring 05.03.2020.pdf
– Transmission 712.62 in model 368, 382, 384
– With clutch actuation hydraulic bearing
– Transmission 712.62 in model 693, 694
– Transmission 712.62 in model 958
– Transmission 712.63 in model 368, 382, 384, 685.282/284/289/290
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 715.05 in model 382, 384
– Transmission 715.05 in model 693, 694
– Transmission 715.06 in model 382, 384
– Transmission 715.06 in model 695
AR26.40-G-0007A Removing installing transmission output flange 10.3.04.pdf
– AR26.40-G-0007A Removing/installing transmission output flange 10.3.04
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.40-G-0007B Remove install transmission output flange 24.6.04.pdf
– AR26.40-G-0007B Remove/install transmission output flange 24.6.04
– MODEL 000.001 with TRANSMISSION 715.521 /560
– 2 Output flange
AR26.40-G-0007E Remove install transmission output flange 17.4.08.pdf
– AR26.40-G-0007E Remove/install transmission output flange 17.4.08
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.40-1019-09
– Shown on transmission 715.350 with 2 Thrust washer 6 Puller hook
– performance-optimized Voith retarder 3 O-ring
– 4 Transmission output flange
– 1 Stretch bolt 5 Radial shaft seal
– 1 Detach propeller shaft from transmission Secure propeller shaft to prevent it from
– output flange (4) falling.
AR26.40-G-2470D Remove and install front section of transmission housing 2.3.12.pdf
– AR26.40-G-2470D Remove and install front section of transmission housing 2.3.12
– MODEL 000.001 with TRANSMISSION 712.639
– G26.40-3127-09
– 1 Hydraulic clutch-release mechanism 10 Guide bolts 19 Rear section of transmission housing
– 2 Hexagon bolt 11 Guide bolts 20 Washer3 Radial shaft seal 12 Dust boot 21 Hexagon bolt
– 9 Front section of transmission 18 Main shaft
– housing
– transmission’s output flange and position the
– transmission vertically on the support plate.
– *715589016300
AR26.40-G-2475D Remove install rear section of transmission housing 14.12.09.pdf
– AR26.40-G-2475D Remove/install rear section of transmission housing 14.12.09
– MODEL 000.001 with TRANSMISSION 712.639
– G26.40-3129-09
– 5 Pulse wheel 22 Shift rod 15 Rear section of transmission housing
– 6 Hexagon socket head screw 23 Bracket 16 Pulse generator
– 1 Remove front section of transmission housing AR26.40-G-2470D
– 2 Insert rear part of transmission housing (15) Insert spacer (24) in support plate (13).
– with both shafts in the support plate (13)
AR26.40-G-3840E Remove install output shaft radial shaft sealing ring 10.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.40-1019-09
– Shown on transmission 715.350 with 2 Thrust washer 6 Puller hook
– performance-optimized Voith retarder 3 O-ring
– 4 Transmission output flange
– 1 Stretch bolt 5 Radial shaft seal
– 1 Remove transmission output flange (4) AR26.40-G-0007E
– 2 Remove radial shaft sealing ring (5). Place the extraction hook (6) on the inside
AR26.40-W-2470-01HB Detach front section of transmission housing.pdf
– AR26.40-W-2470-01HB Detach front section of transmission housing
– Assembly tool for installing shift rod of splitter WF58.50-N-2635-02A
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77) without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– without CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
AR26.40-W-2470-01HN Detach front section of transmission housing.pdf
– AR26.40-W-2470-01HN Detach front section of transmission housing
– Assembly tool for installing shift rod of splitter WF58.50-N-2635-02A
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE G2E (Transmission G 281-12/14.93-1.0) with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– with CODE G2F (Transmission G 330-12/11.63-0.77) with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.40-W-2470-08HB Install front section of transmission housing.pdf
– AR26.40-W-2470-08HB Install front section of transmission housing
– Assembly tool for installing shift rod of splitter WF58.50-N-2635-02A
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77) without CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– without CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
AR26.40-W-2470-08HC Install front section of transmission housing.pdf
– AR26.40-W-2470-08HC Install front section of transmission housing
– Assembly tool for installing shift rod of splitter Transmission 715 in model 963, 964, 967 WF58.50-N-2635-02A
– group
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– Splitter group
– Number Designation TRANSMISSION
– 715.310
– BA26.35-N-1001-01HA Shift fork bearing bolt to transmission housing Nm 120
– 715 589 03 15 00 715 589 05 31 00 715 589 08 33 00 715 589 09 15 00
AR26.40-W-2470-08HN Install front section of transmission housing.pdf
– AR26.40-W-2470-08HN Install front section of transmission housing
– Assembly tool for installing shift rod of splitter WF58.50-N-2635-02A
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE G2E (Transmission G 281-12/14.93-1.0) with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– with CODE G2F (Transmission G 330-12/11.63-0.77) with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.40-W-2470HB Remove and install front section of transmission housing 26.03.2014.pdf
– AR26.40-W-2470HB Remove and install front section of transmission housing 26.03.2014
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– Remove
– 1 Remove transmission Select procedure according to design and
– accessibility.
– 2 Remove power take-off Only for transmission with transmission-
– independent power take-off (live power take-off).
– 3 Detach front section of transmission housing Transmission without transmission- AR26.40-W-2470-01HB
– independent power take-off (live power take-off)
– Transmission with transmission-independent AR26.40-W-2470-01HN
– power take-off (live power take-off)
AR26.40-W-3841HA Remove install radial shaft sealing ring at output side 12.03.2014.pdf
– TRANSMISSION 715.352
– with CODE G2B (Transmission G 211-12/14.93-1.0)
– TRANSMISSION 715.360
– with CODE G2C (Transmission G 230-12/11.7-0.78)
– W26.40-1051-09
AR26.40-W-3841HB Remove install radial shaft sealing ring at output side 12.03.2014.pdf
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– TRANSMISSION 715.508
– with CODE G1H (Transmission G 230-16/14.2-0.83)
– TRANSMISSION 715.518
– with CODE G1I (Transmission G 231-16/17.0-1.0)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– TRANSMISSION 715.528
– with CODE G1J (Transmission G 260-16/11.7-0.69)
– W26.40-1052-09
– Shown on transmission 715.371
– 1 Output flange 2 Radial shaft sealing ring 3 Extraction hook
AR26.40-W-3841HC Remove install radial shaft sealing ring at output side 12.03.2014.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– W26.40-1070-09
– 1 Pull output flange (1) off the transmission AR26.50-W-2000HC
– shaft
– shaft sealing ring (2) from transmission extraction hook (3).
– *602589003300 Impact extractor
AR26.40-W-3841HE Remove install radial shaft sealing ring at output side 12.03.2014.pdf
– TRANSMISSION 715.571
– with CODE G1F (Transmission G 141-9/14.57-1.0)
– W26.40-1072-09
– 1 Pull output flange (1) off the transmission AR26.50-W-2000HE
– shaft
AR26.45-B-0001F Remove install PTO 12.02.16.pdf
– Manual transmission 712.064, 712.62, 712.63, 715.054 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48)
– with CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– Manual transmission 712.064, 712.62, 712.63, 715.054 with CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– 1 Manual shifting gearbox
AR26.45-B-0001G Remove install PTO 05.03.2020.pdf
– Transmission 712.620/625/634
– with CODE NL8 (MB-NA 60 1c with MPA)
– Transmission 712.623/632, 715.054/064
– Transmission 712.623/632/652/653, 715.054/064
– Transmission 712.631 in model 384.334
AR26.45-B-0001H Remove install PTO 12.02.16.pdf
– Manual transmission 712.62, 712.63, 712.65, 715.054, 715.064
– 1 Power take-off
– 3 Connection of the PTO control switch4 Transmission shaft
– 5 Pneumatic piping banjo connection
– 2 Remove the transmission shaft (4) *BA41.20-B-1001-01B In cases 715.054.
– *BA41.20-B-1001-01B In cases 715.051.
AR26.45-B-0001I Remove install PTO 05.03.2020.pdf
– Transmission 712.620/625/634
– with CODE NN2 (MB-NA 60 2c with MPA, low position, rotation N)
– Transmission 712.623/632, 715.054/064
– Transmission 712.623/632/652/653, 715.054/064
– Transmission 712.631 in model 384.334
AR26.45-B-0002B Remove install hydraulic pump 31.08.2017.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.631 in model 384.334
– 1 Hydraulic pump
AR26.45-B-0010B Disassembling power take-off 05.03.2020.pdf
– Transmission 712.623 in model 368, 382, 384
– Transmission 712.631 in model 384.334
– Transmission 715.054 in model 382, 384, 684
– Transmission 715.064 in model 382, 384
– W26.45-0110-09
AR26.45-B-0011B Remove install radial shaft seal for output flange 04.08.2020.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
– 1 Radial seal
– 5 Transmission shaft
– W26.45-0081-11
– 1 Remove the transmission shaft (5) *BA41.20-B-1001-01B .Attachment screws of transmission flanges with
– power outlet
AR26.45-B-0015B PTO assembly 04.08.2020.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
– W26.45-0110-09
– 1 Transmission cover 19 Sealing ring
– 2 Tapered roller bearings outer races 20 Support ring
AR26.45-B-0016-01A Determining thickness of shim on output shaft.pdf
– Transmission 715.054
– without CODE NN2 (MB-NA 60 2c with MPA, low position, N speed)
– Transmission 715.064 in model 382
– Transmission 715.064 in model 384
– Transmission 715.064 in model 695
AR26.45-B-0016-01B Determining thickness of shim on output shaft.pdf
– Transmission 712.362/451/623/632, 715.054
– with CODE NN2 (MB-NA 60 2c with MPA, low position, rotation N)
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
AR26.45-B-0016-02A Determine thickness of shim on drive gear.pdf
– Transmission 712.362/451/623/632
– with CODE NN2 (MB-NA 60 2c with MPA, low position, N speed)
– Transmission 712.623/632
– Transmission 712.631 in model 384.334
– Transmission 715.054 in model 382, 384, 684.2
– Transmission 715.054 in model 693, 694
– Transmission 715.064 in model 382Transmission 715.064 in model 384
– Transmission 715.064 in model 695
– Power take-off test values
AR26.45-B-0016-05A Determining thickness of shim on the.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
– Power take-off test values
AR26.45-B-0016D Disassemble assemble PTO 04.08.2020.pdf
– Transmission 715.054 in model 382, 384
– Transmission 715.054 in model 684.2
– Transmission 715.054 in model 693, 694
– W26.45-0084-09
– 1 Transmission cover 15 Outer race of the bearing
– 2 Outer race 16 Shim
AR26.45-B-0020E Remove install shift cylinder 04.08.2020.pdf
– Transmission 712.62/63 in model 368, 382
– with CODE NN2 (MB-NA 60 2c with MPA, low position, low rpm) with CODE NM4 (MB-NA 60 2b with
– Transmission 712.62/63 in model 693, 694
– Transmission 712.62/63 in model 958
– Transmission 715.054 in model 382
– Transmission 715.054 in model 693, 694
– Transmission 715.064 in model 382
– Transmission 715.064 in model 695
AR26.45-B-0020F Remove install shift cylinder 04.08.2020.pdf
– Transmission 712.62/63 in model 368, 382
– with CODE NL8 (MB-NA 60 1c with MPA) with CODE NL5 (Power take-off MB 60 1b, flange)
– Transmission 712.62/63 in model 693, 694
– Transmission 712.62/63 in model 958
– Transmission 715.054 in model 382
– Transmission 715.054 in model 693, 694
– Transmission 715.064 in model 382
– Transmission 715.064 in model 695
AR26.45-B-0056A Remove install oil filter 12.02.16-.pdf
– Manual transmission 715.504, 715.517, 715.527 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48) with
– CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– 1 Filter cap screws
AR26.45-B-0056A Remove install oil filter 12.02.16.pdf
– Manual transmission 715.504, 715.517, 715.527 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48) with
– CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– 1 Filter cap screws
AR26.45-B-0061A Remove install bearing flange of hollow shaft 12.02.16.pdf
– Manual transmission 715.504, 715.517, 715.527 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48)
– Manual transmission 715.504, 715.517, 715.527 with CODE N57 (Transmission independent power take-off (NMV) i = 1.09)Manual transmission 715.564 with CODE N04 (PTO, layshaft MB, 1b)
– 1 Hex head bolts
AR26.45-W-0002AA Remove install hydraulic pump 29.4.13.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121
AR26.45-W-0002BA Remove install hydraulic pump 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– with power take-off 124
AR26.45-W-0002CA Remove install hydraulic pump 29.4.13.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0002DA Remove install hydraulic pump 29.7.13.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0002EA Remove install hydraulic pump 14.04.2014.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0003-01AA Disassemble assemble bearing housing.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 121-1b
– Number Designation Transmission 715
– with PTO 121
AR26.45-W-0003-01D Disassemble assemble bearing housing.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 131
– Number Designation Transmission 715
– with PTO 131
AR26.45-W-0003AA Remove install bearing housing output 29.4.13.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121-1b
AR26.45-W-0003DA Remove install bearing housing output 03.09.2018.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0004-01E Disassemble adjust assemble intermediate.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
– Number Designation Transmission 715
– with PTO 135
AR26.45-W-0004AA Remove install power take-off 14.06.2019.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 121
– 2 Drain and collect transmission oil.
– Model 963, 964 AP26.00-W-2601H
– 3 Remove drive flange from transmission. Transmission 715.352/360 AR26.50-W-2000HA
– Transmission 715.371/381/508/518/523/528 AR26.50-W-2000HB
– Transmission 715.571 AR26.50-W-2000HE
– 4.1 Detach propeller shaft from power take-off (7). Power take-off with drive shaft
AR26.45-W-0004AB Remove install power take-off 14.06.2019.pdf
– Transmission 715.310
– with power take-off 121
– 1 Power take-off 7 Transmission S2 Power take-off 1 indicator switch
– 2 Oil pump housing 8 Pressure relief valve with bypass Y8 Power take-off 1 solenoid valve
– N6Z (Transmission cooling))
– 3 Roll pin 9 Pressure relief valve (only on Y8a Power take-off 1 solenoid valve with
– vehicles without code N6Z shift lock(Transmission cooling))
– 4 Oil pump gear (driven) 10 Electrical connection (PTO indicator A Pin
AR26.45-W-0004BA Remove install power take-off 14.06.2019.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 123
– with power take-off 124
– 2 Drain and collect transmission oil.
– Model 963, 964 AP26.00-W-2601H
AR26.45-W-0004BB Remove install power take-off 14.06.2019.pdf
– Transmission 715.310
– with power take-off 123
– with power take-off 124
– 1 Power take-off 7 Transmission S2 Power take-off 1 indicator switch
– 2 Oil pump housing 8 Pressure relief valve with bypass Y8 Power take-off 1 solenoid valve
– N6Z (Transmission cooling))
– 3 Roll pin 9 Pressure relief valve (only on Y8a Power take-off 1 solenoid valve with
– vehicles without code N6Z shift lock(Transmission cooling))
– 4 Oil pump gear (driven) 10 Electrical connection (PTO indicator A Pin
AR26.45-W-0004CA Remove install power take-off 14.06.2019.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0004CB Remove install power take-off 14.06.2019.pdf
– Transmission 715.310
– with power take-off 125
– 1 Power take-off 1 7 Transmission S2 Power take-off 1 indicator switch
– 2 Oil pump housing 8 Pressure relief valve with bypass Y8 Power take-off 1 solenoid valve
– N6Z (Transmission cooling))
– 3 Roll pin 9 Pressure relief valve (only on Y8a Power take-off 1 solenoid valve with
– vehicles without code N6Z shift lock(Transmission cooling))
– 4 Oil pump gear (driven) 10 Electrical connection (PTO indicator A Pin
– 2 Drain transmission oil from power take-off
– Model 963, 964 AP26.00-W-2601H
AR26.45-W-0004DA Remove install power take-off 14.06.2019.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0004EA Remove install power take-off 13.01.2015.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0005-01D Remove install power take-off drive shaft.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 131
AR26.45-W-0005-02D Disassemble assemble power take-off shift.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 131
AR26.45-W-0005-03B Disassemble assemble power take-off drive.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 123
– with power take-off 124
– Number Designation Transmission 715
– with PTO 123, 124
AR26.45-W-0005-03C Disassemble assemble power take-off drive.pdf
– TRANSMISSION 715
– with power take-off 125 and drive shaft with cylindrical roller bearing
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0005-03CA Disassemble assemble power take-off drive.pdf
– TRANSMISSION 715
– with power take-off 125 and drive shaft with ball bearing
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0005-03E Disassemble assemble power take-off drive.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
AR26.45-W-0005-04C Disassemble assemble power take-off output.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0005-04E Disassemble assemble power take-off output.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
AR26.45-W-0005-05C Remove install oil pipe from power take-off.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0005-05E Remove install oil pipe from power take-off.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
AR26.45-W-0005AA Disassemble power take-off 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121-2b, 121-2c
– 1 Remove power take-off. Transmission AR26.45-W-0004AA
– 715.352/360/371/381/508/518/523/528/571
– Transmission 715.310 AR26.45-W-0004AB
– 2 Detach power take-off 1 indicator switch (S2)
AR26.45-W-0005AB Disassemble power take-off 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121-1b
AR26.45-W-0005BA Disassemble power take-off 29.4.13.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– transmission 715.310)
– 2 Housing cover 17 Radial shaft sealing ring (only PTO 33 Piston with shift rod
AR26.45-W-0005BB Disassemble power take-off 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 124
– transmission 715.310) 124-10b or 11b)
– 2 Housing cover 18 Output flange (only PTO 124-10b or 34 Drain screw
AR26.45-W-0005C Disassemble power take-off 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0006AA Assemble power take-off 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121-2b, 121-2c
AR26.45-W-0006AB Assemble power take-off 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121-1b
AR26.45-W-0006BA Assemble power take-off 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– transmission 715.310)
– 2 Housing cover 17 Radial shaft sealing ring (only PTO 33 Piston with shift rod
AR26.45-W-0006BB Assemble power take-off 03.09.2018.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 124
– transmission 715.310) 124-10b or 11b)
– 2 Housing cover 18 Output flange (only PTO 124-10b or 34 Drain screw
AR26.45-W-0006C Assemble power take-off 13.08.2020.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0006D Assemble power take-off 03.09.2018.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0006E Assemble power take-off 13.08.2020.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0007A Remove install shift cylinder with solenoid valve at power take-off 1 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121
AR26.45-W-0007B Remove install shift cylinder with solenoid valve at power take-off 1 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– with power take-off 124
AR26.45-W-0007C Remove install shift cylinder with solenoid valve at power take-off 1 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0007D Remove install shift cylinder with solenoid valve at power take-off 1 14.06.2019.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0007E Remove install shift cylinder with solenoid valve at power take-off 1 25.03.2014.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0008BA Remove install shift cylinder with solenoid valve at power take-off 2 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– with power take-off 124
AR26.45-W-0008C Remove install shift cylinder with solenoid valve at power take-off 2 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0008E Remove install shift cylinder with solenoid valve at power take-off 2 05.05.2014.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0009BA Remove install power take-off 2 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
AR26.45-W-0009BB Remove install power take-off 2 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 124
AR26.45-W-0009C Remove install power take-off 2 14.06.2019.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0009E Remove install power take-off 2 14.04.2014.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0010-13C Disassemble assemble cluster gear.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0010-13E Disassemble assemble cluster gear.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
– Number Designation Transmission 715
– with PTO 135
AR26.45-W-0010-15C Remove install roller bearing of drive shaft.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
AR26.45-W-0012AA Remove install radial shaft sealing ring on output flange 26.06.2020.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– With power take-off 121-2b
AR26.45-W-0012AB Remove install radial shaft sealing ring on output flange 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121-1b
AR26.45-W-0012B Remove install radial shaft sealing ring on output flange 26.06.2020.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– with power take-off 124
AR26.45-W-0012C Remove install radial shaft sealing ring on output flange 26.06.2020.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0012D Remove install radial shaft sealing ring on output flange 29.07.2013.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0012E Remove install radial shaft sealing ring on output flange 26.06.2020.pdf
– Transmission 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0013-01E Disassemble assemble power take-off 2.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
– Number Designation Transmission 715
– with PTO 135
AR26.45-W-0013-02C Remove install bearing inner race.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
AR26.45-W-0013-02E Remove install bearing inner race.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
AR26.45-W-0013BA Disassemble assemble power take-off 2 29.4.13.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
AR26.45-W-0013BB Disassemble assemble power take-off 2 29.4.13.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 124
AR26.45-W-0013C Disassemble assemble power take-off 2 03.09.2018.pdf
– Transmission 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 125
AR26.45-W-0013E Disassemble assemble power take-off 2 14.04.2014.pdf
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 135
AR26.45-W-0014A Remove install power take-off shift fork 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121
AR26.45-W-0015-05AA Determine shim for drive shaft.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 121-2b, 121-2c
– Number Designation Transmission 715
– with PTO 121
AR26.45-W-0015-05B Determine shim for drive shaft.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 123
– with power take-off 124
– Number Designation Transmission 715
– with PTO 123, 124
AR26.45-W-0015-05C Determine shim for drive shaft.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0015-05D Determine shim for drive shaft.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 131
– Number Designation Transmission 715
– with PTO 131
AR26.45-W-0015-05E Determine shim for drive shaft.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
– Number Designation Transmission 715
– with PTO 135
AR26.45-W-0015-05N Determine shim for drive shaft.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– Transmission-independent power take-off (live PTO)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Modification notes
– Number Designation Transmission
– 715.371/381/523
– with transmission-
– independent power take-off (NMV)
AR26.45-W-0015-06AA Determine shim for output shaft.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 121-2b, 121-2c
– Number Designation Transmission 715
– with PTO 121
AR26.45-W-0015-06B Determine shim for output shaft.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 123
– with power take-off 124
– Number Designation Transmission 715
– with PTO 123, 124
AR26.45-W-0015-06C Determine shim for output shaft.pdf
– TRANSMISSION 715.3
– with power take-off 125
– TRANSMISSION 715.5
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0015-06D Determine shim for output shaft.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 131
– Number Designation Transmission 715
– with PTO 131
AR26.45-W-0015-06E Determine shim for output shaft.pdf
– Transmission 715.316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 135
– Number Designation Transmission 715
– with PTO 135
AR26.45-W-0015-06N Determine shim for output shaft.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0016-03C Disassemble assemble adjust intermediate.pdf
– Transmission 715.310/316/352/356/360/366/371/376/381/386/508/518/523/528/536/537/538/539/571
– with power take-off 125
– Number Designation Transmission 715
– with PTO 125
AR26.45-W-0019N Remove install power take-off NMV shift module 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0024N Remove install output flange and radial shaft sealing ring of power take-off NMV 19.03.2014.pdf
– TRANSMISSION 715.371/381/523
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0032N Remove install bearing cap of power take-off NMV drive shaft 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0033N Remove install power take-off NMV shift fork and sliding sleeve 07.07.2016.pdf
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code G2E (Transmission G 281-12/14.93-1.0) with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– with code G2F (Transmission G 330-12/11.63-0.77) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.45-W-0034N Remove install power take-off NMV rpm sensor 19.03.2014.pdf
– TRANSMISSION 715.371/381/523
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0037N Remove install bearing cap of power take-off NMV hollow shaft 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
AR26.45-W-0038N Remove install housing cover of power take-off NMV drive shaft 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0039N Remove install power take-off live power take-off 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0040N Disassemble power take-off live power take-off 19.03.2014.pdf
– TRANSMISSION 715.371/381/523
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0041N Assemble power take-off live power take-off 20.06.2016.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0047A Remove install power take-off 1 indicator switch 29.07.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 121
– with power take-off 123
– with power take-off 124
– with power take-off 125
– TRANSMISSION 715.352/360/371/381/508/518/523/528/571
– with power take-off 131
AR26.45-W-0048A Remove install power take-off 2 indicator switch 29.04.2013.pdf
– TRANSMISSION 715.310/352/360/371/381/508/518/523/528/571
– with power take-off 123
– with power take-off 124
– with power take-off 125
– with power take-off 135
AR26.45-W-0059N Remove install power take-off output shaft live power take-off 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0062N Remove install hollow shaft 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
AR26.45-W-0064-01N Determine shim size for intermediate gear.pdf
– TRANSMISSION 715.371/381/523
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0064N Remove install intermediate gear 19.03.2014.pdf
– TRANSMISSION 715.371/381/523
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
AR26.45-W-0071N Remove install oil pump 06.03.2020.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
AR26.50-B-0420-06A Remove install 5th gear wheel.pdf
– Transmission 712.62, 715.051
– Transmission 712.62, 715.054
– Transmission 712.62/64, 715.054
– Transmission 712.62
– Transmission 712.64
– Remove
AR26.50-B-0420-07A Remove install 4th gear gearwheel.pdf
– Transmission 712.62, 715.051
– Transmission 712.622 in model 384
– Transmission 712.623/64
– Transmission 712.62
– Transmission 712.64
– Remove
AR26.50-B-0420-08B Remove install 3rd gear wheel.pdf
– Transmission 712.622 in model 368.0
– Transmission 712.63, 715.064
– Transmission 712.63/65, 715.064
– Transmission 712.63
– Remove
AR26.50-B-0420-10A Check main shaft end float.pdf
– Transmission 712.622/631 in model 368.0/1, 685.282/284/289/290
– Transmission 712.623/632 in model 368, 382, 384
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334
– Gear set
– The figure shown here corresponds to a transmission 715.054Validation
– 1 Place the rear of the transmission (2) on two bases (3) so
– that the secondary shaft (1) is positioned vertically and free from the box.
AR26.50-B-0420-17A Check wear limits of synchronizer rings.pdf
– Transmission 712.612 in model 688, 979
– Transmission 712.612/623 in model 368, 382, 384, 685, 688
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623 in model 693, 694
– Transmission 712.631 in model 384.334
– Drive shaft
– Number Designation Gearbox 712.62/64, Transmissions
– 715.054 712.63, 715.064
AR26.50-B-0420E Disassemble and assemble main shaft 12.05.2020.pdf
– Transmission 712.62/64, 715.054
– Transmission 712.62
– Transmission 712.64
– Transmission 715.054
– Modification notes
– 1 Remove the transmission rear part . AR26.40-B-2475D
– 2 Remove, by prying the main shaft and the . AR26.50-B-2475-01A
AR26.50-B-0425TJ Disassemble transmission main shaft 12.03.2020.pdf
– AR26.50-B-0425TJ Disassemble transmission main shaft 12.03.2020
– Transmission 712.63 in model 368
– Transmission 712.63 in model 382
– Transmission 712.63 in model 384
– Transmission 712.63 in model 693
– Transmission 712.63 in model 695
– Transmission 712.63 in model 958
– Transmission 715.06 in model 382
– Transmission 715.06 in model 384Transmission 715.06 in model 695
– W26.50-1127-09
AR26.50-B-0426TJ Assembling transmission main shaft 05.03.2020.pdf
– AR26.50-B-0426TJ Assembling transmission main shaft 05.03.2020
– Transmission 712.63 in model 368
– Transmission 712.63 in model 382
– Transmission 712.63 in model 384
– Transmission 712.63 in model 685.282/284/289/290
– Transmission 712.63 in model 693
– Transmission 712.63 in model 695
– Transmission 712.63 in model 958
– Transmission 715.06 in model 382Transmission 715.06 in model 384
– Transmission 715.06 in model 695
– W26.50-1127-09
AR26.50-B-2475-01A Lifting out and inserting countershaft and main.pdf
– Transmission 712.612/622/623/631/632
– Transmission 712.612
– Transmission 712.623/632
– 715 589 02 63 00 715 589 01 63 00 715 589 02 59 00
AR26.50-B-4743-02A Check play between grooved ball bearing and.pdf
– Transmission 712.622/631 in model 368.0/1
– Gear set
AR26.50-B-4743-03A Checking play between grooved ball bearing.pdf
– and circlip in front section of transmission housing
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623/632 in model 368, 382, 384
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334, 685.282/284/289/290
– Gear set
AR26.50-B-4743F Remove install drive shaft 05.03.2020.pdf
– Transmission 712.62
– Transmission 712.64
– Transmission 715.054
– Modification notes
AR26.50-B-4744TI Dismantle assemble drive shaft. 12.03.2020.pdf
– Transmission 712.62 in model 368, 382, 384
– Transmission 712.62 in model 693, 694
– Transmission 712.62 in model 958
– Transmission 712.63 in model 368, 382, 384, 685.282/284/289/290
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 715.05 in model 382, 384
– Transmission 715.05 in model 693, 694Transmission 715.06 in model 382, 384
– Transmission 715.06 in model 695
– 1 Safety lock
– Transmission 712.63, 715.06 AR26.10-B-0005TG
– 2 Remove the safety lock (1) from the input shaft
AR26.50-B-4775G Disassemble assemble countershaft 12.05.2020.pdf
– Transmission 712.62
– Transmission 712.64 (except 712.647)
– Transmission 715.054
– Modification notes
– 1 Disassemble the transmission rear part . AR26.40-B-2475D
– 2 Remove, by prying the main shaft and the . AR26.50-B-2475-01A
AR26.50-B-4775TE Disassemble assemble countershaft 12.03.2020.pdf
– Transmission 715.062 in model 384
– Represented on transmission 715.060
– 1 Constant gear
– Modify support plate for transmission WF58.50-B-2610-04A
– 3 Remove the constant gear (1)
AR26.50-G-0420-11A Determine shim for main shaft.pdf
– Number Designation Transmission
– 715.501/511 with code GS3 and code IY2
AR26.50-G-0420-11B Determine shim for main shaft.pdf
– Number Designation Transmission
– 715.521 in model 000.001
AR26.50-G-0420-11E Determine shim for main shaft.pdf
– Number Designation Transmission Transmissions
– 715.351/361715.350
AR26.50-G-0420-12A Check service limit between synchronizer.pdf
– Number Designation Transmission
– 715.501/511 with code GS3
AR26.50-G-0420-12B Checking wear limit between synchronizer.pdf
– Number Designation Transmission Transmission
– 715.521 in 715.560 in model 000.001 model 000.001
AR26.50-G-0420-12E Checking wear limit between synchronizer.pdf
– Number Designation Transmission Transmissions
– 715.351/361715.350
AR26.50-G-0420D Disassemble and assemble main shaft 2.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.639
– W26.50-1018-09
– 1 Remove rear part of transmission housing AR26.40-G-2475D
– 2 Lift countershaft and main shaft out of support AR26.50-G-2475-01D
AR26.50-G-0425F Disassemble transmission main shaft 5.3.04.pdf
– AR26.50-G-0425F Disassemble transmission main shaft 5.3.04
– MODEL 000.001 with TRANSMISSION 712.619
– W26.50-1081-09
– 11 Needle roller bearing 29 Needle roller bearing 47 Circlip12 6th gear gearwheel 30 Transmission main shaft 48 Needle roller bearing
– 13 Circlip 31 Needle roller bearing 49 Reverse gear gearwheel
AR26.50-G-0425FF Disassemble transmission main shaft 1.4.04.pdf
– AR26.50-G-0425FF Disassemble transmission main shaft 1.4.04
– MODEL 000.001 with TRANSMISSION 712.618
– G26.50-3210-09
AR26.50-G-0426A Assembling transmission main shaft 31.5.06.pdf
– AR26.50-G-0426A Assembling transmission main shaft 31.5.06
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
AR26.50-G-0426B Assembling transmission main shaft 11.11.08.pdf
– AR26.50-G-0426B Assembling transmission main shaft 11.11.08
– MODEL 000.001 with TRANSMISSION 715.560
– W26.50-1039-09
AR26.50-G-0426C Assembling transmission main shaft 31.5.06.pdf
– AR26.50-G-0426C Assembling transmission main shaft 31.5.06
– MODEL 000.001 with TRANSMISSION 715.521
– G26.50-3213-09
AR26.50-G-0426E Assembling transmission main shaft 11.11.08.pdf
– AR26.50-G-0426E Assembling transmission main shaft 11.11.08
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– G26.50-3217-09
AR26.50-G-3102-02A Remove install planet gears.pdf
– Assembly mandrel for planet gear Transmission 715.5 WF58.50-N-2650-07A
– Gear set, shafts
– Number Designation Transmission
– 715.501/511
AR26.50-G-3102-02B Remove install planet gears.pdf
– Number Designation Transmission Transmission
– 715.521 in 715.560 in
AR26.50-G-3102-02E Remove install planetary gears.pdf
– Number Designation Transmission Transmissions
– 715.350 715.351/361
AR26.50-G-3102A Disassembling and assembling planetary gear set with shift mechanism 31.5.06.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
AR26.50-G-3102B Disassembling and assembling planetary gear set with shift mechanism 31.5.06.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– G26.31-3103-09
AR26.50-G-3102E Disassemble assemble planetary gear set with shift mechanism 11.11.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.50-1116-09
– 3.1 Remove synchronizer ring (12), synchronizer Only on transmission without performance-
– cone (7), spacer bush (6), spacer ring (15) optimized Voith retarder.and sliding sleeve (11)
– 3.2 Remove retarder drive gear with Only on transmission with performance-
– synchronizer ring (13), synchronizer cone (7), optimized Voith retarder.spacer bush (6), spacer ring (15) and sliding sleeve (11)
AR26.50-G-4743D Input shaft removal and installation 2.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.639
– 1 Radial shaft seal
– 3 Front section of transmission housing4 Grooved ball bearing
– 5 Circlip
– 1 Remove front section of transmission housing AR26.40-G-2470D
– (3)
– transmission housing (3)
– 5 Remove locking ring (5) AR26.50-G-4743-01D The circlip (5) is under high preload,
– section of the transmission housing (3)
– Install
AR26.50-G-4744-01E Determine shim thickness for input shaft.pdf
– Number Designation Transmission Transmissions
– 715.351/361715.350
AR26.50-G-4744A Dismantling assembling the driveshaft. 11.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
– 1 (only for transmission 715.501) 2 Oil pipe 11 Circlip
– 8.2 Gear wheel on constant speed gear 3 Circlip 12 Adapter 1 (only for transmission 715.511) 4 Air flow sensor plate13 Intermediate pipe section8.3 Synchronizer ring (only for 5 Circlip14 Adapter transmission 715.511)6 Annular spring
– 9 Needle roller bearing 15 Gripper 7 Synchronizer cone
AR26.50-G-4744D Dismantle assemble drive shaft. 16.6.04-.pdf
– MODEL 000.001 with TRANSMISSION 715.521
– G26.50-3212-09
AR26.50-G-4744D Dismantle assemble drive shaft. 16.6.04.pdf
– MODEL 000.001 with TRANSMISSION 715.521
– G26.50-3212-09
AR26.50-G-4744E Dismantle assemble drive shaft. 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.50-1115-09
AR26.50-G-4775-01E Determine shim for countershaft.pdf
– Number Designation Transmission Transmissions
– 715.351/361715.350
AR26.50-G-6000E Remove install countershaft brake VGW-B 10.3.09.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.50-1119-09
– Shown on transmission 715.350 3 O-ring 7 O-ring
– 4 Shim 8 Brake disks
AR26.50-G-6001E Remove install disks of countershaft brake VGW-B 10.3.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– W26.50-1120-08
– transmission oil for at least 8 hours before installation or in warm transmission oil (approx. 70 °C) for at least 10 minutes before
– installation.
AR26.50-W-0004H Remove install oil restrictor on main shaft 06.03.2020.pdf
– Transmission 715.350/352/360/370/371/380/381/500/507/508/510/513/515/517/518/520/523/525/527/528/540/561/567/5
– 68/570/571/576
AR26.50-W-0007HC Remove install tapered roller bearing on countershaft 07.07.2016.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.50-1188-08
– 1 Disassemble transmission AR26.10-W-0005HC
– 2 Remove tapered roller bearing (1) *652589003321 Hand pump
AR26.50-W-0410-03HN Determine shims of drive shaft and.pdf
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77) with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– with CODE G2F (Transmission G 330-12/11.63-0.77) with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
AR26.50-W-0420-11HA Determine shim for main shaft.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366/537/538/539 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– Test and adjustment values for gear set
– Number Designation Transmission Transmission
– 715.352/360 715.356/366
AR26.50-W-0420-11HC Determine shim for main shaft.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– Test and adjustment values for gear set
– Number Designation TRANSMISSION
– 715.310
AR26.50-W-0425HA Disassemble transmission main shaft 08.03.2019.pdf
– AR26.50-W-0425HA Disassemble transmission main shaft 08.03.2019
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.50-1157-09
AR26.50-W-0425HB Disassemble transmission main shaft 10.5.12.pdf
– AR26.50-W-0425HB Disassemble transmission main shaft 10.5.12
– TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0
– TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
– W26.50-1157-09
AR26.50-W-0425HC Disassemble transmission main shaft 07.07.2016.pdf
– AR26.50-W-0425HC Disassemble transmission main shaft 07.07.2016
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.50-1179-09
AR26.50-W-0425HF Disassemble transmission main shaft 12.02.2014.pdf
– AR26.50-W-0425HF Disassemble transmission main shaft 12.02.2014
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– W26.50-1232-09
AR26.50-W-0426-02HA Identify retaining ring for synchronizer body on.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Test and adjustment values for gear set
AR26.50-W-0426-02HC Identify retaining ring for synchronizer body on.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– Test and adjustment values for gear set
– Number Designation TRANSMISSION
– 715.310
AR26.50-W-0426HA Assembling transmission main shaft 08.03.2019.pdf
– AR26.50-W-0426HA Assembling transmission main shaft 08.03.2019
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.50-1157-09
AR26.50-W-0426HB Assembling transmission main shaft 10.5.12.pdf
– AR26.50-W-0426HB Assembling transmission main shaft 10.5.12
– TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0
– TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
– W26.50-1157-09
AR26.50-W-0426HC Assembling transmission main shaft 07.07.2016.pdf
– AR26.50-W-0426HC Assembling transmission main shaft 07.07.2016
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.50-1191-09
AR26.50-W-0426HF Assembling transmission main shaft 21.07.2017.pdf
– AR26.50-W-0426HF Assembling transmission main shaft 21.07.2017
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– W26.50-1232-09
AR26.50-W-0440-01HC Pull off tapered roller bearing.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– 715 589 23 34 00 652 589 00 33 23 715 589 11 34 00 652 589 00 33 21
AR26.50-W-2000HA Remove install transmission output flange 26.06.2020.pdf
– AR26.50-W-2000HA Remove/install transmission output flange 26.06.2020
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– 1 Screw
– 1 Detach propeller shaft from output flange (4) Transmission 715.352/360
– and place to one side.
– *BA41.10-N-1002-01F Transmission 715.352/360 in model 963,
– 964Bolt/nut, propeller shaft to flange connection
AR26.50-W-2000HB Remove install transmission output flange 26.06.2020.pdf
– AR26.50-W-2000HB Remove/install transmission output flange 26.06.2020
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– Shown on transmission 715.371
– 1 Screw
AR26.50-W-2000HC Remove install transmission output flange 26.06.2020.pdf
– AR26.50-W-2000HC Remove/install transmission output flange 26.06.2020
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– 1 Screw
AR26.50-W-2000HE Remove install transmission output flange 26.06.2020.pdf
– AR26.50-W-2000HE Remove/install transmission output flange 26.06.2020
– Transmission 715.571
– with code G1F (Transmission G 141-9/14.57-1.0)
– 1 Screw
AR26.50-W-3102HA Disassemble assemble planetary gear set with shift mechanism 23.07.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.50-1166-09
– transmission in production period up ring (on vehicles with code B3H to 30.04.2017) (Secondary coolant-retarder))
– 2 Retaining ring 8 Annular spring (only on transmission 14 Thrust piece
– in production period up to 30.04.2017)
– 3 Ball bearing 8.1 Annular spring (only on transmission 15 Spacer ring
– in production period up to
– transmission in production period up without code B3H (Secondary
– to 30.04.2017) coolant-retarder))
AR26.50-W-3102HB Disassemble assemble planetary gear set with shift mechanism 23.07.2019.pdf
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– W26.31-1026-09
– 1 Retaining ring 9 Carrier ring 17 Synchronizer cone (on transmission
– 715.371/381 only in production period up to 30.04.2017)
AR26.50-W-4000-02HB Install main shaft and countershaft with shift.pdf
AR26.50-W-4000-03HC Remove main shaft drive shaft and.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– 715 589 04 59 00 315 589 02 31 00 355 589 01 63 00 715 589 06 33 00
– rear section of transmission
– housing (15).
AR26.50-W-4744-01HA Determine shim for drive shaft.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0) except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– except code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
AR26.50-W-4744-01HN Determine shim for drive shaft.pdf
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– with CODE N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with CODE N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with CODE N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– with CODE G2F (Transmission G 330-12/11.63-0.77) with CODE N4Z (Live power take-off, clutch-dependent, MB 1.65)
– TRANSMISSION 715.523
AR26.50-W-4744HA Dismantle assemble drive shaft. 06.03.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– W26.50-1115-09
– 1 Disassemble transmission Transmission 715.352
– with code G2B (Transmission G
– 211-12/14.93-1.0)
– Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.352 in model 956, 963, 964 AR26.10-W-0005HA
AR26.50-W-4744HB Dismantle assemble drive shaft. 07.07.2016.pdf
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Modification notes
– 1 Disassemble transmission AR26.10-W-0005HB
– 2 Remove retaining ring (11)
AR26.50-W-4744HC Dismantle assemble drive shaft. 07.07.2016.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– W26.50-1187-09
– 1 Disassemble transmission AR26.10-W-0005HC
– 2 Remove retaining ring (11)
AR26.50-W-4744HF Dismantle assemble drive shaft. 13.02.2014.pdf
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– W26.50-1115-09
– 1 Disassemble transmission AR26.10-W-0005HF
– 2 Remove retaining ring (11)
AR26.50-W-4775-01HA Determine shim for countershaft.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Test and adjustment values for gear set
– Number Designation Transmission Transmission
– 715.310 715.352/360
– 715.356/366 715.371/381
AR26.50-W-4775HA Disassemble assemble countershaft 06.03.2019.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– 1 Countershaft
– 1 Disassemble transmission Transmission 715.352
– with code G2B (Transmission G
– 211-12/14.93-1.0)Transmission 715.360 with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.352 in model 956, 963, 964 AR26.10-W-0005HA
– 211-12/14.93-1.0)Transmission 715.360 in model 963, 964 with code G2C (Transmission G 230-12/11.7-0.78)
– 2 Remove tapered roller bearing (2) *652589003321 Hand pump
AR26.50-W-4775HB Disassemble assemble countershaft 10.5.12.pdf
– TRANSMISSION 715.371 with CODE (G2E) Transmission G 281-12/14.93-1.0
– TRANSMISSION 715.381 with CODE (G2F) Transmission G 330-12/11.63-0.77
– 1 Countershaft
– 1 Disassemble transmission AR26.10-W-0005HB
– 2 Remove tapered roller bearing (2) *000589583400 Gripper
AR26.50-W-4775HF Disassemble assemble countershaft 14.2.14.pdf
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– 1 Countershaft
AR26.50-W-6000HA Remove install countershaft brake VGW-B 23.07.2019.pdf
– Transmission 715.310
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0) except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– except code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– except code N4W (Live PTO, partly clutch-dependent, MB 1.2)
AR26.50-W-6000HB Remove install countershaft brake VGW-B 07.07.2016.pdf
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code G2E (Transmission G 281-12/14.93-1.0) with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– with code G2F (Transmission G 330-12/11.63-0.77) with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
AR26.50-W-6001HA Remove install disks of countershaft brake VGW-B 23.07.2019.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
– 21.01.2019 Reference dimension of internal plates Transmission 715.310 BE26.50-N-1005-01HA
– 21.01.2019 Reference dimension of internal plates Transmission 715.352/360 BE26.50-N-1005-01HA
– 21.01.2019 Reference dimension of internal plates Transmission 715.371/381 BE26.50-N-1005-01HA
– 21.01.2019 Reference dimension of internal plates Transmission 715.523 BE26.50-N-1005-01HA
– 02.07.2019 Reference dimension of internal plates Transmission 715.523 BE26.50-N-1005-01HA
– 02.07.2019 Reference dimension of internal plates Transmission 715.371/381 BE26.50-N-1005-01HA
– 02.07.2019 Reference dimension of internal plates Transmission 715.352/360 BE26.50-N-1005-01HA
AR26.55-G-3000-01A Determining shim for oil pump.pdf
– Test and adjustment values for transmission oil cooling, oil pump
– Number Designation Transmission
– 715.501/511 with code GS3 and code IY2
AR26.55-G-3000-01B Determining shim for oil pump.pdf
– Test and adjustment values for transmission oil cooling, oil pump
– Number Designation Transmissions
– 715.521/560 in model 000.001
– If end cover (3) with gasket (4) is installed on the transmission.
– 1.2 Position oil pump housing (1) on the end cover (3).
– 2.1 Use the depth gauge to measure from the contact surface on the oil pump housing (1)
– If an end cover (3) with gasket (4) is installed on the transmission housing.
– 2.2 Use the depth gauge to measure from the contact surface on the oil pump housing (1)
AR26.55-G-3000-01E Determine shim for oil pump.pdf
– Test and adjustment values for transmission oil cooling, oil pump
– Number Designation Transmission Transmissions
– 715.350 715.351/361
– 2 Place existing shim (5) in rear part of transmission housing.
– W26.55-0003-01
AR26.55-G-3000A Removing and installing oil pump and pressure relief valve 10.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.55-G-3000B Removing and installing oil pump and pressure relief valve 23.6.04.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– 1 Roll pin
AR26.55-G-3000E Remove install oil pump and pressure relief valve 17.4.08.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Spring
AR26.55-W-0004H Remove install oil cooler 04.03.2019.pdf
– Transmission 715 in model 963, 964
– with code C6J (Power steering pump, uncontrolled)
– 4 Steering gear oil line 8 Transmission oil line 10 Transmission oil line
– 5 Steering gear oil line 8.1 Fuse 11 Transmission oil line
– 6 Steering gear oil line 9 Transmission oil line 12 Oil cooler
– 7 Steering gear oil line 9.1 Fuse
AR26.55-W-3000-01HA Determine shim for oil pump.pdf
– Transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.366/537/538/539 in model 800
– Transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.508
– with code G1H (Transmission G 230-16/14.2-0.83)
– Transmission 715.518
– with code G1I (Transmission G 231-16/17.0-1.0)
– Transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– Transmission 715.528
– with code G1J (Transmission G 260-16/11.7-0.69)
– Transmission 715.571
– with code G1F (Transmission G 141-9/14.57-1.0)
– Test and adjustment values of transmission cooling, oil pump
– Number Designation Transmission Transmission
AR26.55-W-3000HA Remove install oil pump and pressure relief valve 09.09.2013.pdf
– TRANSMISSION 715.352
– with CODE G2B (Transmission G 211-12/14.93-1.0)
– TRANSMISSION 715.360
– with CODE G2C (Transmission G 230-12/11.7-0.78)
– TRANSMISSION 715.371
– with CODE G2E (Transmission G 281-12/14.93-1.0)
– TRANSMISSION 715.381
– with CODE G2F (Transmission G 330-12/11.63-0.77)
– TRANSMISSION 715.508
– with CODE G1H (Transmission G 230-16/14.2-0.83)
– TRANSMISSION 715.518
– with CODE G1I (Transmission G 231-16/17.0-1.0)
– TRANSMISSION 715.523
– with CODE G2D (Transmission G 280-16/11.7-0.69)
– TRANSMISSION 715.528
– with CODE G1J (Transmission G 260-16/11.7-0.69)
– TRANSMISSION 715.571
– with CODE G1F (Transmission G 141-9/14.57-1.0)
– Shown on transmission 715.371
– 1 Oil pump gear (powered)
AR26.55-W-3000HC Remove install oil pump and pressure relief valve 30.7.13.pdf
– TRANSMISSION 715.310
– with CODE G1E (Transmission G 140-8/9.30-0.79)
– W26.30-1034-09
– 1.1 End cover (only transmission 4 Roll pin (only transmission with
– without power take-off) power take-off)
– transmission with power take- bypass valve (only on vehicles N6Z (Transmission cooling))off) with code N6Z (Transmission
– cooling))
– vehicles without code N6Z (Transmission cooling))
– 3 Oil pump gear (powered) 7 Transmission
– Remove
– 1.1 Remove end cover (1.1) Transmission (7) without power take-off
– AR26.30-W-3001HC
– 1.2 Remove power take-off Transmission (7) with power take-off
– Power take-off 121 AR26.45-W-0004AB
AR26.60-B-0001G Remove and install gearshift system 12.03.2020.pdf
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623 in model 368, 384
– Transmission 712.625 in model 958
– Transmission 712.631 in model 384.334, 685.282/284/289/290
– Transmission 712.64 (except 712.647)
– Transmission 712.64
– Transmission 712.65
– Transmission 715.054/064
– Modification notes
– transmission
– 1 Control box screws
AR26.60-B-0009BA Check and correct hydraulic oil level 08.01.2020.pdf
– Transmission 715.062 in model 384
– The image shows the 715.050 gearbox
AR26.60-B-0042BA Remove install hydraulic transmission positioner with controller unit 08.01.2020.pdf
– AR26.60-B-0042BA Remove/install hydraulic transmission positioner with controller unit 08.01.2020
– Transmission 715.062 in model 384
– B26.60-6699-09
AR26.60-B-6515L Disassemble assemble gearshift system 04.08.2020.pdf
– Transmission 712.620/625/634
– Transmission 712.623/632/652/653
– Transmission 712.623/632
– Transmission 715.054/064
– Modification notes
AR26.60-B-6626G Remove install shift cables 04.08.2020.pdf
– Transmission 712.623/632
– Transmission 712.631 in model 384.334
– Transmission 715.054/064
– Transmission 718.850/853/854/855
– B26.60-6640-09
AR26.60-G-0001-03B Adjusting shift finger.pdf
– Number Designation Transmissions
– 715.521/560 in model 000.001
AR26.60-G-0001-05A Fix the shift rail for reverse gear in installation.pdf
– Number Designation Transmission
– 715.501/511 with code GS3
AR26.60-G-0001-05B Fixing reverse gear shift rail in installation.pdf
– Number Designation Transmission
– 715.521/560 in model 000.001
– transmission housing
– 1 Remove wiring plug (1) from reverse gear switch (S7)
AR26.60-G-0001A Remove and install gearshift system 12.4.10.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– transmission housing
– 2 Disconnect hydraulic gate shift cylinder from AR26.60-G-7100A
– 3 Remove main shutoff valve AR26.60-G-0030A
AR26.60-G-0001AB Remove and install gearshift system 12.4.10.pdf
– MODEL 000.001 with TRANSMISSION 715.560
– 1 Cover
AR26.60-G-0001E Remove and install gearshift system 12.4.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Shift mechanism
AR26.60-G-0025-01A Adjust locking bar for interlock.pdf
– Number Designation Transmission
– 715.501/511 with code GS3 and code IY2
AR26.60-G-0025-01B Adjust locking bar for interlock.pdf
– Number Designation Transmissions
– 715.521/560 in model 000.001
– 3 Measure from the transmission’s joint surface to the lock rod pin (2) with the
– depth
AR26.60-G-0025A Remove install lock rod for interlock 10.11.11.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
AR26.60-G-0025B Remove install lock rod for interlock 10.11.11.pdf
– MODEL 000.001 with TRANSMISSIONS 715.521 /560
– 1 Spring
AR26.60-G-0030A Removing and installing main shutoff valve 15.3.10.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.60-G-6515B Disassemble assemble gearshift system 16.6.10.pdf
– MODEL 000.001 with TRANSMISSION 715.521 /560
– G26.60-3171-09
– Transmission 715.521) 13 Spring 25 Sealing ring
– 2 Shift housing 14 Washer 26 Bearing cap
– 1 Remove shift mechanism Transmission 715.521 AR26.60-G-0001B
– Transmission 715.560 AR26.60-G-0001AB
– 2 Remove solenoid valve (1) Only if transmission 715.521 fitted
– 3 Pull shift hub (15) with notch lever (6) and The index bolt (10) is spring-loaded.
AR26.60-G-6515E Disassemble assemble gearshift system 16.6.10.pdf
– TRANSMISSION 715.350 /351 /361 in MODEL 000.001
– 1 Shift shaft
AR26.60-G-6517A Remove install outer shift housing 12.4.10.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” gearshift
– transmission housing
– 2 Remove main shutoff valve AR26.60-G-0030A
AR26.60-G-7000A Removing installing hydraulic cylindrical actuator for gear selection 9.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.60-G-7100A Removing installing the gate shift cylinder 9.3.04.pdf
– MODEL 000.001 with TRANSMISSION 715.501 /511
– with CODE (GS3) “Hydraulic” transmission shift
– with CODE (IY2) Hydraulic fluid as per sheet 345.0
AR26.60-W-0001HA Remove and install gearshift system 06.03.2019.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– Modification notes
– Shown on transmission 715.371
– 1 Seal
AR26.60-W-0001L Remove and install gearshift system 3.11.10.pdf
– TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
– Shown on transmission 715.060
– 1 Screw
AR26.60-W-0018A Remove install plunger for splitter group travel sensor 20.03.2019.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– W26.60-1367-08
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– 1 Remove transmission positioner. Model 963, 964, 967 with transmission AR26.21-W-0006H
– positioner from Festo
AR26.60-W-6515HA Disassemble assemble gearshift system 06.03.2019.pdf
– Transmission 715.310 in model 963, 964, 967
– with code G1E (Transmission G 140-8/9.30-0.79)
– Transmission 715.352 in model 956, 963, 964
– with code G2B (Transmission G 211-12/14.93-1.0)
– Transmission 715.360 in model 963, 964
– with code G2C (Transmission G 230-12/11.7-0.78)
– Transmission 715.371 in model 963, 964
– with code G2E (Transmission G 281-12/14.93-1.0)
– Transmission 715.381 in model 963, 964
– with code G2F (Transmission G 330-12/11.63-0.77)
– Transmission 715.523 in model 963, 964
– with code G2D (Transmission G 280-16/11.7-0.69)
– 1 Index bolt
AR26.60-W-7000D Remove install hydraulic gear shift cylinder 16.6.10.pdf
– TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
– 1 Screwdriving
AR26.60-W-7100D Remove install hydraulic gate cylinder 16.6.10.pdf
– TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
– 1 Hydraulic lines
– transmission housing
– 2 Detach hydraulic lines (1) from gate shift Collect fluid which runs out. Seal hydraulic
AR26.60-W-7200A Bleeding air from hydraulic-pneumatic shift-control mechanism HPS 16.1.06.pdf
– TRANSMISSION 712.6, 715.0 in MODEL 950, 952, 954
– with CODE (GS3) “Hydraulic” gearshift
– TRANSMISSION 715.3 in MODEL 950, 952, 953, 954
– TRANSMISSION 715.5 in MODEL 950, 952, 953, 954, 930, 932, 933, 934
– Transmission 712.63, 715.060 Transmission 715.5 Transmission 715.320
– 1 Bleed screw 3 Bleed screw 6 Gear shift cylinder
AR26.60-W-7200B Bleeding air from hydraulic-pneumatic shift-control mechanism HPS 16.7.10.pdf
– TRANSMISSION 712.630 in MODEL 950.5, 952.5, 954.5
– with CODE (GS3) “Hydraulic” gearshift
– TRANSMISSION 715.060 in MODEL 950.5 /6, 952.5, 954.5
– TRANSMISSION 715.5 in MODEL 940.###, 942.###, 943.###, 944.### 2#
– TRANSMISSION 715.5 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5
AR43.30-W-0002HV Remove install retarder 30.11.11.pdf
AR43.30-W-0002WR Remove install retarder 04.12.2019.pdf
– 2 Sealing ring 7 Coolant pipe (return) 11 Transmission
– 3 Eyelet 8 Coolant hose (return) 12 Screw
AR43.30-W-0002WS Remove install retarder 13.08.2020.pdf
AR55.90-W-0020-01A Remove install hydraulic auxiliary drive HAD.pdf
– components for removal/installation of engine, transmission, range group cylinder and range group
– Topical note Notes on self-locking nuts and bolts AH00.00-N-0001-01A
– Manual transmission, complete
– Number Designation Transmission Transmission
– 715.352/360 715.371/381
– BA26.10-N-1001-01HA Bolt, transmission to engine Nm 50 50
BB00.40-P-0231-00A General gear oils.pdf
– application into: Frequently the transmission oils fulfill multifunctional requirements,
– Hypoid gear oils, sheet 235.0/.6/.7/.8/.15/.16/.20/.31/.61/.62 which is why they are used in a wide variety of transmission desi gns
– and hydraulic systems. However, where very specific technological Transmission oils, sheet 235.1/.3/.4/.5/.10/.11/.12/.13/.27/.28/.29/.41/
– properties of the transmission oil are required, special transmission oils .71/.72/.73/.74, 236.24
– had to be formulated for these major assemblies. These are listed on Transmission fluids (ATF), sheet 236.1/.2/.3/.6/.7/.8/.9/.10/.11/.12/.13/
– separate sheets of the MB Specifications for Operating Fluids and .14/15/.17./.20/.21/.22/.24/.25/.26/.41/.81/.91, 238.22, 239.21
– explain the large number of sheets for transmission oils.
– The Mercedes-Benz standard for the corresponding lubricant quality
BB00.40-P-0235-16A Transmission oils specification 235.16.pdf
– BB00.40-P-0235-16A Transmission oils (specification 235.16)
– Transmission 715.352/356/360/366/371/376/381/386
– Sheet 235.16 German https://bevo.mercedes-benz.com/bevolisten/235.16_de.html
Determine shim for drive shaft AR26.45-W-0015-05N.pdf
– Transmission 715.371/381/523
– with code N4W (Live PTO, partly clutch-dependent, MB 1.2)Transmission-independent power take-off (live PTO)
– with code N4X (Live PTO, partly clutch-dependent, MB, 1.65)
– Transmission-independent power take-off (live PTO)
– with code N4Y (Live power take-off, clutch-dependent, MB 1.2)
– with code N4Z (Live power take-off, clutch-dependent, MB 1.65)
SM00.10-W-0035-01A Document conversion in VeDoc.pdf
– Model 963, 964 with transmission 715.352
– with code G2B (Transmission G 211-12/14.93-1.0)
– When changing from Festo company to Wabco company
– Model 963, 964 with transmission 715.360
– with code G2C (Transmission G 230-12/11.7-0.78)
– Model 963, 964 with transmission 715.371
– with code G2E (Transmission G 281-12/14.93-1.0)
– Model 963, 964 with transmission 715.381
– with code G2F (Transmission G 330-12/11.63-0.77)
– Model 963, 964 with transmission 715.523
– with code G2D (Transmission G 280-16/11.7-0.69)
– After converting the transmission positioner and the range group For the scope of the range group a previous SAA number, is now
– cylinder, the numbers of the variant parts lists (SAA) must be replaced by 4 new SAA numbers.
WF58.50-N-2635-01A Assembly tool for installing splitter group shift Transmission 715.3 5.pdf
– WF58.50-N-2635-01A Assembly tool for installing splitter group shift Transmission 715.3/5
– rod
– TRANSMISSION 715.3
– TRANSMISSION 715.5
– 1 Fabricate assembly tool according to drawing.
WF58.50-N-2640-02A Spacer for support plate Transmission 712.63 715.060.pdf
– WF58.50-N-2640-02A Spacer for support plate Transmission 712.63, 715.060
– Manufacture spacer from steel rod St37 Ø 30 mm.
WF58.50-N-2650-05A Lifting device for removing and installing main Transmission 715.5.pdf
– WF58.50-N-2650-05A Lifting device for removing and installing main Transmission 715.5
– shaft
WF58.50-N-2650-07A Assembly mandrel for planet gear Transmission 715.3 5.pdf
– WF58.50-N-2650-07A Assembly mandrel for planet gear Transmission 715.3/5
– TRANSMISSION 715.3
– TRANSMISSION 715.5 (except 715.570/571/576)
– Produce assembly mandrel from aluminum, steel or plastic as per the specified dimensions.
WF58.50-N-3100-01A Guide bolt for installing range group Transmissions 715.3 5.pdf
– WF58.50-N-3100-01A Guide bolt for installing range group Transmissions 715.3/5
– Manufacture the guide bolt from an M12 bolt according to the