Service manual Mercedes 712 Transmission

AP26.00-B-2601A Manual transmission – oil change 03.02.2020.pdf
– AP26.00-B-2601A Manual transmission – oil change 03.02.2020
– Transmission 712.612 in model 685, 688
– Transmission 712.612 in model 688
– Transmission 712.62/63
– Transmission 712.622/631 in model 368
– Transmission 715.3 in model 934, 938, 958
– Transmission 715.3 in model 958
– Transmission 715.380 in model 936.315
– except code G02 (Torque converter clutch (WSK))
– Transmission 715.50/51/52/531/535/56/57/585
– Modification notes
– 17.05.2019 Transmission oil BF26.00-B-1001-01GB
– 17.05.2019 Transmission oil BF26.00-B-1002-01GB
– 29.05.2019 Gear oil – Approximate level BF26.00-B-1001-01B
AP26.00-B-2601B Manual transmission – oil change 03.06.2019.pdf
– AP26.00-B-2601B Manual transmission – oil change 03.06.2019
– Transmission 711.622 in model 979.016
– Transmission 715.054 in model 693, 694
– Modification notes
– Transmissions 711, 715 (example)
– 1 Filler plug
AP26.00-B-2601I Manual transmission – oil change 03.02.2020.pdf
– AP26.00-B-2601I Manual transmission – oil change 03.02.2020
– Transmission 710.264/265/266/267
– Transmission 710.264/266
– Transmission 710.271/273/274, 713.70/74/78/80/82
– Transmission 710.272/273, 712.132/31/360/361/363/364, 713.70/74/80/82
– Transmission 712.362/44/451/452, 713.59/70/74/75/78/82 in model 384, 386, 682, 693
– Transmission 712.612/622 in model 384
– Transmission 712.623/632, 715.06
– Transmission 713.59/70/82Transmission 715.054 in model 382, 384, 684
– Transmission 718.07/08/26/69
– Transmission 718.07/19/54/69/73/79
– Transmission 718.19
– Transmission 718.25/54/63/69/73/77/85
– Transmission 718.380/382/383/384
– Transmission 719.690 in model 386
– Modification notes
AP26.00-B-2610B Manual transmission – check oil level correct 27.05.2019.pdf
– AP26.00-B-2610B Manual transmission – check oil level, correct 27.05.2019
– Transmission 712.13/31/36/37/45, 713.70/74/80/82 in model 688, 979
– Transmission 712.36/37/44/45, 713.70/74/78/80/82, 718.25/54/63/69/73/74/77/85 in model 382, 384, 688, 979
– Transmission 712.36/44/45, 713.59/70/74/75/78/82, 718.07/19/54/69/73/79 in model 384, 386, 682, 693, 694, 695
– Transmission 713.59/70/82, 718.07 in model 384, 386
– Modification notes
AP26.00-D-2601A Manual transmission – oil change 25.02.2019.pdf
– AP26.00-D-2601A Manual transmission – oil change 25.02.2019
– Model 636 with transmission 716.65
– Model 638
– except code G40 (Automatic transmission)
– Model 639 with transmission 716.6
– except code MA0 (E-CELL 60 kW)
– Model 667 with transmission 711.11/13/61
– Model 668 with transmission 710.6, 712.21/613/621, 715.00/02/05
– Model 670 with transmission 710.6/84, 711.61, 712.21/613/621, 714.08/50, 715.00/02/05Model 690.6 with transmission 711.620
– Model 901, 902, 903, 904 with transmission 711.60/61
– Model 901, 902, 903, 904, 905 with transmission 711.62
– Modification notes
– Transmission in model 638
– Transmission 716 in model 636, 639
– N26.00-2319-01 S26.00-4500-01
– Transmission 711, 712, 715 (example)
– Transmission 710 (S5-42)
– N26.00-2268-01 N26.00-0286-01
AP26.00-I-2601B Manual transmission – oil change 24.4.07.pdf
– AP26.00-I-2601B Manual transmission – oil change 24.4.07
– TRANSMISSION 712.353 in MODEL 684.482
– 1 Oil filler plug
AP26.00-I-2601K Manual transmission – oil change 27.10.99.pdf
– AP26.00-I-2601K Manual transmission – oil change 27.10.99
– TRANSMISSION 712.351 in MODEL 397, 684
– 1 Transmission
– 2 Oil drain screw
– below transmission
– 2 Clean transmission (1) around oil filler screw
– (3) and oil drain screw (2).
– 3 Unscrew oil filler screw (3) and oil drain screw Only drain transmission oil when warm.
– (2). Drain transmission oil completely into a
– suitable vessel.
– 5 Pour in transmission oil up to bottom edge of *BF26.00-N-1001-01H
– oil filler opening.
AP26.00-W-2601K Manual transmission – oil change 06.04.2017.pdf
– AP26.00-W-2601K Manual transmission – oil change 06.04.2017
– Transmission 710.580/581/582 in model 967
– Transmission 712.614 in model 967
– Transmission 712.671/682 in model 967
– Transmission 715.058/066 in model 967
– Transmission 715.310 in model 967
– Transmission 715.571 in model 967
– Modification notes
– 21.02.2017 Gear oil Transmission 710.580/581/582 BF26.00-N-1001-01M
– Shown on transmission 715.066
– 1 Drain screw
– handling of transmission oil. Health risk and safety glasses.
– caused by swallowing transmission oil Do not pour transmission oil into beverage
– bottles.
– 1 Remove bottom cover for transmission
– 2 Clean area around oil filler screw (2) and drain
AR25.20-B-0181BD Remove install hydraulic central clutch release bearing 05.03.2020.pdf
– Model 384.0 with transmission 715.062
– Represented on gearbox 715.06
– 1 Transmission removal . AR26.10-B-0020BG
– Topical note Notes on self-locking nuts and bolts AH00.00-N-0001-01A
AR25.20-G-0180F Remove install central clutch operator 16.3.10.pdf
– MODEL 000.001 with TRANSMISSIONS 712.618 /619
– Shown schematically
AR26.10-B-0005TF Disassemble transmission 12.03.2020.pdf
– AR26.10-B-0005TF Disassemble transmission 12.03.2020
– Transmission 712.62, 715.05
– W26.10-1104-09
– ending 0041837) transmission “manual” actuation)
– 2 Cover (countershaft) 14 Rear housing cover 25 Retaining pin
AR26.10-B-0005TG Disassemble transmission 12.03.2020.pdf
– AR26.10-B-0005TG Disassemble transmission 12.03.2020
– Transmission 712.63, 715.06
– W26.10-1105-09
– ending 0041837) transmission with “manual”
– actuation)
AR26.10-B-0010TF Assemble transmission 16.03.2020.pdf
– AR26.10-B-0010TF Assemble transmission 16.03.2020
– Transmission 712.62, 715.05
– Modification notes
– 1 Safety lock 13 Cover (only transmission up to 24 Control unit (only with code (GS1)
– number ending 041837) gearbox “manual” actuation)
AR26.10-B-0010TG Assemble transmission 16.03.2020.pdf
– AR26.10-B-0010TG Assemble transmission 16.03.2020
– Transmission 712.63 in model 368, 382, 384, 685
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 712.630/639, 715.06
– Transmission 715.06 in model 382, 384, 685
– Transmission 715.06 in model 695
– Modification notes
– ending 0041837) transmission with “manual”
– actuation)
AR26.10-B-0020-06BA Depressurize pressure reservoir for automatic.pdf
– Transmission 715.062 in model 384.076
– Automatic gear control (AGS)
AR26.10-B-0020A Remove install transmission 12.02.16.pdf
– AR26.10-B-0020A Remove/install transmission 12.02.16
– Manual transmission 712.623, 715.054
– W26.10-0026-09
– 1 Exhaust manifold 10 Transmission shaft
– 2 Torx bolt 11 Torx nuts3 Exhaust manifold 12 Torx bolts
AR26.10-B-0020B Remove install transmission 04.08.2020.pdf
– AR26.10-B-0020B Remove/install transmission 04.08.2020
– Transmission 712.62/63/64/65, 715.054/064
– *
– 3 Torx screws 10 Connector of the socket on transmission
– 4 Supporting bracket 11 Oil piping
– 6 Transmission supporting mounts 13 Control rods7 Connector of speedometer drive plug 14 Support
– Risk of injury Warning caused by body parts being Ensure that no one is within the tilting range of AS60.80-Z-0001-01A
AR26.10-B-0020BG Remove install transmission 04.09.2017.pdf
– AR26.10-B-0020BG Remove/install transmission 04.09.2017
– Transmission 715.062 in model 384.0
– B26.10-0022-09
AR26.10-B-0020D Remove install transmission 04.08.2020.pdf
– AR26.10-B-0020D Remove/install transmission 04.08.2020
– Transmission 712.623, 715.054
– –
– 8 Transmission shaft to the power takeoff Flechas Assemblage orifices of the exhaust unit’s floor plate
– Risk of fire /risk of explosion due to short No fires, sparks, open flames, or smoking. AS54.10-Z-0001-01A Danger
AR26.10-G-0005F Disassemble transmission 4.3.04.pdf
– AR26.10-G-0005F Disassemble transmission 4.3.04
– MODEL 000.001 with TRANSMISSION 712.618 /619
– G26.10-3180-09
– 1 Front section of transmission 8 Shift fork, 5th/6th gears 17 Reverse gear
– housing 9 Transmission main shaft 18 Reverse gear shaft
– 2 Radial shaft seal 10 Rear section of transmission housing 19 Countershaft
– 3 Guide bolt for shift fork mounting 11 Lock bolt 20 Shift mechanism
AR26.10-G-0010F Assemble transmission 27.2.12.pdf
– AR26.10-G-0010F Assemble transmission 27.2.12
– MODEL 000.001 with TRANSMISSIONS 712.618 /619
– G26.10-3180-09
– 1 Front section of transmission 8 5th/6th gear shift fork 17 Reverse gear
– housing 9 Transmission main shaft 18 Reverse gear shaft
– 2 Radial shaft seal 10 Rear section of transmission housing 19 Countershaft
– 3 Guide bolt for shift fork mounting 11 Lock bolt 20 Shift mechanism
AR26.10-I-0001A Disassembling and assembling transmission 21.9.99.pdf
– AR26.10-I-0001A Disassembling and assembling transmission 21.9.99
– TRANSMISSION 712.351
– N26.50-2046-09
– 1 Transmission housing 17 Gearshift mechanism 32 Drive flange
– 2 Side cover 18 Spacer plate 33 Nut3 Side cover gasket 19 Screw 34 Speedometer worm screw
– 5 Drive shaft 21 Rear transmission cover 36 Spring6 Oil retainer 22 Speedometer 37 Sealing ring
– 7 Nilos ring 23 Sealing ring 38 Screw plug
– 1 Drain transmission oil
– AP26.00-I-2601K
– 2 Remove transmission
– 3 Attach transmission to mounting block
AR26.10-I-0038A Remove install transmission carrier 24.4.07.pdf
– AR26.10-I-0038A Remove/install transmission carrier 24.4.07
– TRANSMISSION 712.353 in MODEL 684.482
– N22.10-2033-08
– 1 Transmission carrier 3 Nut 5 Sleeve
– 2 Bolt 4 Bolt 6 Transmission
– Remove/install
– 2 Support the transmission (6) using a suitable Also use a suitable wooden or rubber
– major assembly lifting device base as otherwise the transmission (6) may
– be damaged.
– transmission (6) is free of any tension when it is propped up.
– 3 Remove bolts (2) *BA26.10-N-1004-01I
AR26.19-B-0003B Remove install neutral position switch 09.03.2020.pdf
– Transmission 712.64 (except 712.647), 715.054/064
– Transmission 712.64
– Transmission 712.65, 715.054/064
– S9 Neutral position switch
AR26.19-B-0010B Remove install reverse gear switch 05.03.2020.pdf
– Transmission 712.620/625/634 in model 375, 958, 970, 972, 976
– Transmission 712.622/623/631/632/641, 715.054/064 in model 368.### #D, 382.### #D, 384.### #D, 684.### #D
– Transmission 712.622/623/631/632/641, 715.054/064 in model 382.### #B, 384.### #B, 684.### #B
– Transmission 712.623/632/652/653, 715.054/064 in model 693.### #B, 694.### #B, 695.### #B
– Transmission 712.623/632/652/653, 715.054/064 in model 693.### #D, 694.### #D, 695.### #D
– Transmission 712.641 in model 684.### #B
– Transmission 712.641 in model 684.### #D
– S7 Reverse gear switch
AR26.19-G-0003F Remove install neutral position switch 4.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.618 /619
– S9 Neutral position switch
AR26.19-G-0006F Remove install speed sensor 4.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.618 /619
– B17 Speed sensor
AR26.19-G-0010F Remove install reverse gear switch 4.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.618 /619
– S7 Reverse gear switch
AR26.30-I-1000-01A Determine shim for input shaft bearing cap.pdf
– Number Designation Transmission
– 712.351
– bearing of input shaft, position tip of dial indicator on face of front section of transmission
– housing. Preload dial indicator and set scale to “0”. Do not turn scale of dial
AR26.30-I-1020A Remove install input shaft bearing cap 13.10.99.pdf
– TRANSMISSION 712.351 in MODEL 397, 684
– 1 Bolt
– transmission housing and remove gasket (5). spring lock washer (6).
– Apply transmission oil to lip of radial sealing ring in guide tube (8).
– *BA26.30-N-1006-01E
– transmission housing. for input shaft bearing cap (2).
– *BE26.30-N-1002-01B
AR26.30-I-1030A Disassemble assemble bearing cap of drive shaft 15.8.11.pdf
– TRANSMISSION 712.351 in MODEL 397, 684
– 1 Drive shaft bearing cap
AR26.40-B-2470-01A Detach front section of transmission housing.pdf
– AR26.40-B-2470-01A Detach front section of transmission housing
– Transmission 712.61 in model 384
– Transmission 712.61 in model 979
– Transmission 712.622/631 in model 368
– Transmission 712.623/632 in model 368, 382, 384, 693, 694, 695
– Transmission 712.63 in model 958
– Transmission 712.631 in model 384.334, 685.282/284/289/290
– Transmission 715.05 in model 382
– Transmission 715.05 in model 384
– Transmission 715.05 in model 693Transmission 715.05 in model 694
– 715 589 01 35 00 715 589 02 33 14 652 589 00 33 00
AR26.40-B-2470-04A Attach detach support plate at transmission.pdf
– AR26.40-B-2470-04A Attach/detach support plate at transmission
– Transmission 712.622/631 in model 368, 685.282/284/289/290
– Transmission 712.64 in model 382, 384, 684
– Transmission 712.64 in model 684
– Transmission 712.65 in model 695
– Transmission 715.054 in model 382, 384, 684
– Transmission 715.054 in model 693, 694
– 715 589 01 63 00
AR26.40-B-2470F Remove and install front section of transmission housing 12.03.2020.pdf
– AR26.40-B-2470F Remove and install front section of transmission housing 12.03.2020
– Transmission 712.62
– without clutch hydraulic drive bearing
– Transmission 712.64
– Transmission 715.054
AR26.40-B-2470J Remove and install front section of transmission housing 12.03.2020.pdf
– AR26.40-B-2470J Remove and install front section of transmission housing 12.03.2020
– Transmission 712.62
– with clutch hydraulic drive bearing
– Transmission 712.64
– Transmission 715.054
AR26.40-B-2475-02A Detaching rear part of transmission housing.pdf
– AR26.40-B-2475-02A Detaching rear part of transmission housing
– pulling off/pulling on device
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623/632 in model 368, 382, 384
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334
– Modification notes
AR26.40-B-2475-04A Installing rear part of transmission housing.pdf
– AR26.40-B-2475-04A Installing rear part of transmission housing
– pulling off/pulling on device
– Transmission 712.612 in model 688, 979
– Transmission 712.612/623/632 in model 368, 382, 384, 685, 688
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334
– Modification notes
– 1 Heat the main bearing of the main shaft at the rear of the transmission (1) to 80°
– C.
AR26.40-B-2475D Remove install rear section of transmission housing 12.05.2020.pdf
– AR26.40-B-2475D Remove/install rear section of transmission housing 12.05.2020
– Transmission 712.62, 715.054
– Transmission 712.62/64, 715.054
– Transmission 712.62
– Transmission 712.64
– W26.40-1003-09
– 1 Remove the front part of the transmission Transmission without clutch hydraulic central AR26.40-B-2470F
– drive.
– Transmission with clutch hydraulic central AR26.40-B-2470J
AR26.40-B-2476TB Disassemble assemble rear section of transmission housing 16.03.2020.pdf
– AR26.40-B-2476TB Disassemble/assemble rear section of transmission housing 16.03.2020
– Transmission 712.620/630, 715.05/06
– Transmission 712.630/639, 715.06
– Transmission 715.05/06
– Transmission 715.06
– 1 Lock-ring
– 1 Disassemble the gearbox Transmission 712.620, 715.05 AR26.10-B-0005TF
– Transmission 712.630/639, 715.06 AR26.10-B-0005TG
– 2 Remove locking ring (1)
AR26.40-B-3257A Remove install input shaft radial shaft sealing ring 09.03.2020.pdf
– Transmission 712.62 in model 368, 382, 384
– Without hydraulic clutch actuation bearing
– Transmission 712.62 in model 693, 694
– Transmission 712.62 in model 958
– Transmission 712.63 in model 368, 382, 384, 685.282/284/289/290
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 715.05 in model 382, 384
– Transmission 715.05 in model 693, 694
– Transmission 715.06 in model 382, 384
– Transmission 715.06 in model 695
AR26.40-B-3257B Remove install input shaft radial shaft sealing ring 05.03.2020.pdf
– Transmission 712.62 in model 368, 382, 384
– With clutch actuation hydraulic bearing
– Transmission 712.62 in model 693, 694
– Transmission 712.62 in model 958
– Transmission 712.63 in model 368, 382, 384, 685.282/284/289/290
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 715.05 in model 382, 384
– Transmission 715.05 in model 693, 694
– Transmission 715.06 in model 382, 384
– Transmission 715.06 in model 695
AR26.40-G-0007F Remove install transmission output flange 4.3.04.pdf
– AR26.40-G-0007F Remove/install transmission output flange 4.3.04
– MODEL 000.001 with TRANSMISSION 712.618 /619
– 1 Screw
– 3 Transmission output flange4 Parking brake brake drum
– G26.40-3121-11
– 1 Unscrew bolt (1) and remove washer (2) Counterhold transmission output flange
– (3).
– 3 Detach transmission output flange (3). Use thrust piece (dia. 20 mm, length 100
– mm).
AR26.40-G-2470D Remove and install front section of transmission housing 2.3.12.pdf
– AR26.40-G-2470D Remove and install front section of transmission housing 2.3.12
– MODEL 000.001 with TRANSMISSION 712.639
– G26.40-3127-09
– 1 Hydraulic clutch-release mechanism 10 Guide bolts 19 Rear section of transmission housing
– 2 Hexagon bolt 11 Guide bolts 20 Washer3 Radial shaft seal 12 Dust boot 21 Hexagon bolt
– 9 Front section of transmission 18 Main shaft
– housing
– transmission’s output flange and position the
– transmission vertically on the support plate.
– *715589016300
AR26.40-G-2475D Remove install rear section of transmission housing 14.12.09.pdf
– AR26.40-G-2475D Remove/install rear section of transmission housing 14.12.09
– MODEL 000.001 with TRANSMISSION 712.639
– G26.40-3129-09
– 5 Pulse wheel 22 Shift rod 15 Rear section of transmission housing
– 6 Hexagon socket head screw 23 Bracket 16 Pulse generator
– 1 Remove front section of transmission housing AR26.40-G-2470D
– 2 Insert rear part of transmission housing (15) Insert spacer (24) in support plate (13).
– with both shafts in the support plate (13)
AR26.40-G-2476D Disassemble assemble rear section of transmission housing 16.1.09.pdf
– AR26.40-G-2476D Disassemble/assemble rear section of transmission housing 16.1.09
– MODEL 000.001 with TRANSMISSION 712.639
– 1 Circlip
– 1 Remove rear section of transmission housing AR26.40-G-2475D
– 2 Remove circlip (1) Installation: Use new circlip. The circlip
– transmission housing in bearing area to approx. 80 °C.
– Hot-air gun
AR26.40-G-3257D Remove install input shaft radial shaft sealing ring 14.12.09.pdf
– MODEL 000.001 with TRANSMISSION 712.639
– Exemplified
AR26.40-G-3257F Remove install input shaft radial shaft sealing ring 15.6.09.pdf
– MODEL 000.001 with TRANSMISSION 712.618 /619
– 1 Transmission housing
– 2 Radial shaft seal
– transmission housing (1) ring (2) at lip.
– *715589001500
AR26.40-G-3840F Remove install output shaft radial shaft sealing ring 15.6.09.pdf
– MODEL 000.001 with TRANSMISSION 712.618 /619
– Shown schematically
– 1 Transmission housing
– 2 Radial shaft seal
– 1 Remove transmission output flange AR26.40-G-0007F
– 2 Remove radial shaft sealing ring (2) from *BR00.45-Z-1001-06A Installation: Grease radial shaft sealing
AR26.40-I-0002B Remove install guide tube 12.4.10.pdf
– TRANSMISSION 712.353 in MODEL 684
– 1 Screw
– 6 Oil baffle plate7 Transmission
– W26.40-0012-05
– 1 Drain transmission oil Model 684.49
– Model 684.482 AP26.00-I-2601B
– 2 Remove the transmission (7) Model 684.49
– Model 684.482 AR26.10-I-0020B
AR26.40-I-2001A Remove install transmission housing 12.4.10.pdf
– AR26.40-I-2001A Remove/install transmission housing 12.4.10
– TRANSMISSION 712.351 in MODEL 397, 684
– N26.40-2043-07
– 1 Output flange 4 C-clamp 6 Transmission housing
– 5 Screw 7 Rear transmission cover 2 Holder
– 3 Bolts
– 1 Drain transmission oil
– Manual transmission – oil change AP26.00-I-2601K
– 2 Remove transmission
– 3 Remove shift mechanism AR26.60-I-0001A
– transmission to workbench using a suitable C-
– clamp (4).
– 7 Unscrew bolt (5) from transmission housing The bolt (5) secures the reverse gear bolt.
– (6).
– transmission vertically so that transmission
– housing (6) can be removed upwards.
AR26.40-I-2002A Disassemble assemble transmission housing 12.10.99.pdf
– AR26.40-I-2002A Disassemble/assemble transmission housing 12.10.99
– TRANSMISSION 712.351 in MODEL 397, 684
– Shown on main shaft bearing
– 3 Transmission housing4 Outer bearing race of main shaft tapered roller bearing
– 5 Shim
– 1 Remove transmission housing (3). AR26.40-I-2001A
– 2 Remove ball sleeve (10) from transmission *000589263300
– housing (3) using internal extractor (11) and countersupport (12).
AR26.45-B-0001F Remove install PTO 12.02.16.pdf
– Manual transmission 712.064, 712.62, 712.63, 715.054 with CODE N56 (Transmission independent power take-off (NMV) i = 1.48)
– with CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– Manual transmission 712.064, 712.62, 712.63, 715.054 with CODE N57 (Transmission independent power take-off (NMV) i = 1.09)
– 1 Manual shifting gearbox
AR26.45-B-0001G Remove install PTO 05.03.2020.pdf
– Transmission 712.620/625/634
– with CODE NL8 (MB-NA 60 1c with MPA)
– Transmission 712.623/632, 715.054/064
– Transmission 712.623/632/652/653, 715.054/064
– Transmission 712.631 in model 384.334
AR26.45-B-0001H Remove install PTO 12.02.16.pdf
– Manual transmission 712.62, 712.63, 712.65, 715.054, 715.064
– 1 Power take-off
– 3 Connection of the PTO control switch4 Transmission shaft
– 5 Pneumatic piping banjo connection
– 2 Remove the transmission shaft (4) *BA41.20-B-1001-01B In cases 715.054.
– *BA41.20-B-1001-01B In cases 715.051.
AR26.45-B-0001I Remove install PTO 05.03.2020.pdf
– Transmission 712.620/625/634
– with CODE NN2 (MB-NA 60 2c with MPA, low position, rotation N)
– Transmission 712.623/632, 715.054/064
– Transmission 712.623/632/652/653, 715.054/064
– Transmission 712.631 in model 384.334
AR26.45-B-0002B Remove install hydraulic pump 31.08.2017.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.631 in model 384.334
– 1 Hydraulic pump
AR26.45-B-0010B Disassembling power take-off 05.03.2020.pdf
– Transmission 712.623 in model 368, 382, 384
– Transmission 712.631 in model 384.334
– Transmission 715.054 in model 382, 384, 684
– Transmission 715.064 in model 382, 384
– W26.45-0110-09
AR26.45-B-0011B Remove install radial shaft seal for output flange 04.08.2020.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
– 1 Radial seal
– 5 Transmission shaft
– W26.45-0081-11
– 1 Remove the transmission shaft (5) *BA41.20-B-1001-01B .Attachment screws of transmission flanges with
– power outlet
AR26.45-B-0015B PTO assembly 04.08.2020.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
– W26.45-0110-09
– 1 Transmission cover 19 Sealing ring
– 2 Tapered roller bearings outer races 20 Support ring
AR26.45-B-0016-01B Determining thickness of shim on output shaft.pdf
– Transmission 712.362/451/623/632, 715.054
– with CODE NN2 (MB-NA 60 2c with MPA, low position, rotation N)
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
AR26.45-B-0016-01C Determining thickness of shim on output shaft.pdf
– Transmission 712.362/451/623/632
– without CODE NN2 (MB-NA 60 2c with MPA, low position, N speed)
– Transmission 712.623/632
– Transmission 712.631 in model 384.334
AR26.45-B-0016-02A Determine thickness of shim on drive gear.pdf
– Transmission 712.362/451/623/632
– with CODE NN2 (MB-NA 60 2c with MPA, low position, N speed)
– Transmission 712.623/632
– Transmission 712.631 in model 384.334
– Transmission 715.054 in model 382, 384, 684.2
– Transmission 715.054 in model 693, 694
– Transmission 715.064 in model 382Transmission 715.064 in model 384
– Transmission 715.064 in model 695
– Power take-off test values
AR26.45-B-0016-02B Determine thickness of shim on drive gear.pdf
– Transmission 712.362/451/623/632
– without CODE NN2 (MB-NA 60 2c with MPA, low position, N speed)
– Transmission 712.623/632
– Transmission 712.631 in model 384.334
AR26.45-B-0016-05A Determining thickness of shim on the.pdf
– Transmission 712.362/451/623/632, 715.054
– Transmission 712.623/632, 715.054
– Transmission 712.631 in model 384.334
– Power take-off test values
AR26.45-B-0020E Remove install shift cylinder 04.08.2020.pdf
– Transmission 712.62/63 in model 368, 382
– with CODE NN2 (MB-NA 60 2c with MPA, low position, low rpm) with CODE NM4 (MB-NA 60 2b with
– Transmission 712.62/63 in model 693, 694
– Transmission 712.62/63 in model 958
– Transmission 715.054 in model 382
– Transmission 715.054 in model 693, 694
– Transmission 715.064 in model 382
– Transmission 715.064 in model 695
AR26.45-B-0020F Remove install shift cylinder 04.08.2020.pdf
– Transmission 712.62/63 in model 368, 382
– with CODE NL8 (MB-NA 60 1c with MPA) with CODE NL5 (Power take-off MB 60 1b, flange)
– Transmission 712.62/63 in model 693, 694
– Transmission 712.62/63 in model 958
– Transmission 715.054 in model 382
– Transmission 715.054 in model 693, 694
– Transmission 715.064 in model 382
– Transmission 715.064 in model 695
AR26.50-B-0001-01B Remove install bearing race.pdf
– Transmission 712.44 in model 382
– Transmission 712.44 in model 693, 694, 695
– Transmission 712.45 in model 384
– Transmission 712.45 in model 693
– Transmission 712.45 in model 979
– Transmission 718.693/694 in model 694, 695
– Transmission 718.731/732 in model 382.0
– Removal of the main shaft rear bearing
AR26.50-B-0420-06A Remove install 5th gear wheel.pdf
– Transmission 712.62, 715.051
– Transmission 712.62, 715.054
– Transmission 712.62/64, 715.054
– Transmission 712.62
– Transmission 712.64
– Remove
AR26.50-B-0420-07A Remove install 4th gear gearwheel.pdf
– Transmission 712.62, 715.051
– Transmission 712.622 in model 384
– Transmission 712.623/64
– Transmission 712.62
– Transmission 712.64
– Remove
AR26.50-B-0420-08B Remove install 3rd gear wheel.pdf
– Transmission 712.622 in model 368.0
– Transmission 712.63, 715.064
– Transmission 712.63/65, 715.064
– Transmission 712.63
– Remove
AR26.50-B-0420-09B Remove install 2nd gear wheel.pdf
– Transmission 712.622/623 in model 368.002/004/006/052/054/115, 382.111, 384.061/067/069/201/223/311/333
– Remove
AR26.50-B-0420-10A Check main shaft end float.pdf
– Transmission 712.622/631 in model 368.0/1, 685.282/284/289/290
– Transmission 712.623/632 in model 368, 382, 384
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334
– Gear set
– The figure shown here corresponds to a transmission 715.054Validation
– 1 Place the rear of the transmission (2) on two bases (3) so
– that the secondary shaft (1) is positioned vertically and free from the box.
AR26.50-B-0420-17A Check wear limits of synchronizer rings.pdf
– Transmission 712.612 in model 688, 979
– Transmission 712.612/623 in model 368, 382, 384, 685, 688
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623 in model 693, 694
– Transmission 712.631 in model 384.334
– Drive shaft
– Number Designation Gearbox 712.62/64, Transmissions
– 715.054 712.63, 715.064
AR26.50-B-0420E Disassemble and assemble main shaft 12.05.2020.pdf
– Transmission 712.62/64, 715.054
– Transmission 712.62
– Transmission 712.64
– Transmission 715.054
– Modification notes
– 1 Remove the transmission rear part . AR26.40-B-2475D
– 2 Remove, by prying the main shaft and the . AR26.50-B-2475-01A
AR26.50-B-0425TJ Disassemble transmission main shaft 12.03.2020.pdf
– AR26.50-B-0425TJ Disassemble transmission main shaft 12.03.2020
– Transmission 712.63 in model 368
– Transmission 712.63 in model 382
– Transmission 712.63 in model 384
– Transmission 712.63 in model 693
– Transmission 712.63 in model 695
– Transmission 712.63 in model 958
– Transmission 715.06 in model 382
– Transmission 715.06 in model 384Transmission 715.06 in model 695
– W26.50-1127-09
AR26.50-B-0426TJ Assembling transmission main shaft 05.03.2020.pdf
– AR26.50-B-0426TJ Assembling transmission main shaft 05.03.2020
– Transmission 712.63 in model 368
– Transmission 712.63 in model 382
– Transmission 712.63 in model 384
– Transmission 712.63 in model 685.282/284/289/290
– Transmission 712.63 in model 693
– Transmission 712.63 in model 695
– Transmission 712.63 in model 958
– Transmission 715.06 in model 382Transmission 715.06 in model 384
– Transmission 715.06 in model 695
– W26.50-1127-09
AR26.50-B-2475-01A Lifting out and inserting countershaft and main.pdf
– Transmission 712.612/622/623/631/632
– Transmission 712.612
– Transmission 712.623/632
– 715 589 02 63 00 715 589 01 63 00 715 589 02 59 00
AR26.50-B-4743-02A Check play between grooved ball bearing and.pdf
– Transmission 712.622/631 in model 368.0/1
– Gear set
AR26.50-B-4743-03A Checking play between grooved ball bearing.pdf
– and circlip in front section of transmission housing
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623/632 in model 368, 382, 384
– Transmission 712.623/632 in model 693, 694, 695
– Transmission 712.631 in model 384.334, 685.282/284/289/290
– Gear set
AR26.50-B-4743F Remove install drive shaft 05.03.2020.pdf
– Transmission 712.62
– Transmission 712.64
– Transmission 715.054
– Modification notes
AR26.50-B-4744TI Dismantle assemble drive shaft. 12.03.2020.pdf
– Transmission 712.62 in model 368, 382, 384
– Transmission 712.62 in model 693, 694
– Transmission 712.62 in model 958
– Transmission 712.63 in model 368, 382, 384, 685.282/284/289/290
– Transmission 712.63 in model 693, 695
– Transmission 712.63 in model 958
– Transmission 715.05 in model 382, 384
– Transmission 715.05 in model 693, 694Transmission 715.06 in model 382, 384
– Transmission 715.06 in model 695
– 1 Safety lock
– Transmission 712.63, 715.06 AR26.10-B-0005TG
– 2 Remove the safety lock (1) from the input shaft
AR26.50-B-4775G Disassemble assemble countershaft 12.05.2020.pdf
– Transmission 712.62
– Transmission 712.64 (except 712.647)
– Transmission 715.054
– Modification notes
– 1 Disassemble the transmission rear part . AR26.40-B-2475D
– 2 Remove, by prying the main shaft and the . AR26.50-B-2475-01A
AR26.50-G-0420-10D Check mainshaft end float.pdf
– Number Designation Transmission
– 712.639
– 1 Put the rear section of the transmission housing (2) down on
– two bases (3) so that the main shaft (1) is suspended vertically
AR26.50-G-0420-11F Determine shim for main shaft.pdf
– Number Designation Transmission
– 712.618/619
AR26.50-G-0420-17D Check wear limits of synchronizer rings.pdf
– Number Designation Transmission
– 712.639
AR26.50-G-0420D Disassemble and assemble main shaft 2.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.639
– W26.50-1018-09
– 1 Remove rear part of transmission housing AR26.40-G-2475D
– 2 Lift countershaft and main shaft out of support AR26.50-G-2475-01D
AR26.50-G-0425F Disassemble transmission main shaft 5.3.04.pdf
– AR26.50-G-0425F Disassemble transmission main shaft 5.3.04
– MODEL 000.001 with TRANSMISSION 712.619
– W26.50-1081-09
– 11 Needle roller bearing 29 Needle roller bearing 47 Circlip12 6th gear gearwheel 30 Transmission main shaft 48 Needle roller bearing
– 13 Circlip 31 Needle roller bearing 49 Reverse gear gearwheel
AR26.50-G-0425FF Disassemble transmission main shaft 1.4.04.pdf
– AR26.50-G-0425FF Disassemble transmission main shaft 1.4.04
– MODEL 000.001 with TRANSMISSION 712.618
– G26.50-3210-09
AR26.50-G-0426F Assembling transmission main shaft 17.12.09.pdf
– AR26.50-G-0426F Assembling transmission main shaft 17.12.09
– MODEL 000.001 with TRANSMISSION 712.619
– W26.50-1074-09
– 11 Needle roller bearing 29 Transmission main shaft 47 Needle roller bearing12 6th gear gearwheel 30 Needle roller bearing 48 Reverse gear gearwheel
– 13 Thrust plate 31 2nd gear gearwheel 49 Reverse gear synchronizer body
AR26.50-G-0426FF Assembling transmission main shaft 17.12.09.pdf
– AR26.50-G-0426FF Assembling transmission main shaft 17.12.09
– MODEL 000.001 with TRANSMISSION 712.618
– G26.50-3210-09
– 14 Thrust plate 30 Transmission main shaft 46 Tapered roller bearing15 4th. gear gearwheel 31 Needle roller bearing 47 Spacer washer
– 16 Needle roller bearing 32 2nd gear gearwheel 48 Pulse star
AR26.50-G-4743-02D Checking play between the grooved ball.pdf
– Number Designation Transmission
– 712.639
AR26.50-G-4743-03D Checking play between grooved ball bearing.pdf
– and circlip in front section of transmission
– housing
– Number Designation Transmission
– 712.639
– BE26.50-N-1002-01K Play of deep-groove ball bearing in front mm 0,00…0.07section of transmission housing
– Commercially available tools
AR26.50-G-4743D Input shaft removal and installation 2.3.04.pdf
– MODEL 000.001 with TRANSMISSION 712.639
– 1 Radial shaft seal
– 3 Front section of transmission housing4 Grooved ball bearing
– 5 Circlip
– 1 Remove front section of transmission housing AR26.40-G-2470D
– (3)
– transmission housing (3)
– 5 Remove locking ring (5) AR26.50-G-4743-01D The circlip (5) is under high preload,
– section of the transmission housing (3)
– Install
AR26.50-I-2001A Remove install and adjust main shaft and countershaft 15.8.11.pdf
– TRANSMISSION 712.351 in MODEL 397, 684
– N26.50-2047-09
– 4 Spacer plate 17 Transmission rear end cover 29 Bolt
– 5 Shift housing gasket 18 Reverse gear 30 Outer bearing race of input shaft
– 24 Washer 12 Transmission housing
– 25 Bolt 13 Main shaft
– 1 Remove transmission housing (12) AR26.40-I-2001A
– 2 Remove main shaft (13), shift rods, and AR26.50-I-2002-03A
AR26.50-I-2002-02A Install main shaft with shift rails and.pdf
– countershaft in rear section of transmission housing
– Inspection data of cover
– Number Designation Transmission
– 712.351
– BE26.30-N-1001-01B Installation depth of radial sealing ring in mm 7…8rear transmission cover
– Cover
– BA26.30-N-1008-01E Bolt for gear lock on rear transmission cover M6 Nm 10
– Gear set, shafts
AR26.50-I-4775-01A Determine shim for countershaft.pdf
– Number Designation Transmission
– 712.351
– BE26.40-N-1001-01A Shims, transmission housing bearing cap mm 0.02…0.09
– Cover
– BA26.30-N-1007-01E Bolt, rear transmission cover to transmission M8 Nm 23housing
– 710 589 02 63 00 710 589 00 21 00 710 589 01 63 00
– 1 Insert transmission housing (2) vertically from above into rear transmission cover (3).
– Output flange (4) faces downwards.
AR26.60-B-0001G Remove and install gearshift system 12.03.2020.pdf
– Transmission 712.622/631 in model 368.0/1
– Transmission 712.623 in model 368, 384
– Transmission 712.625 in model 958
– Transmission 712.631 in model 384.334, 685.282/284/289/290
– Transmission 712.64 (except 712.647)
– Transmission 712.64
– Transmission 712.65
– Transmission 715.054/064
– Modification notes
– transmission
– 1 Control box screws
AR26.60-B-0009BA Check and correct hydraulic oil level 08.01.2020.pdf
– Transmission 715.062 in model 384
– The image shows the 715.050 gearbox
AR26.60-B-0042BA Remove install hydraulic transmission positioner with controller unit 08.01.2020.pdf
– AR26.60-B-0042BA Remove/install hydraulic transmission positioner with controller unit 08.01.2020
– Transmission 715.062 in model 384
– B26.60-6699-09
AR26.60-B-6515L Disassemble assemble gearshift system 04.08.2020.pdf
– Transmission 712.620/625/634
– Transmission 712.623/632/652/653
– Transmission 712.623/632
– Transmission 715.054/064
– Modification notes
AR26.60-B-6626G Remove install shift cables 04.08.2020.pdf
– Transmission 712.623/632
– Transmission 712.631 in model 384.334
– Transmission 715.054/064
– Transmission 718.850/853/854/855
– B26.60-6640-09
AR26.60-G-0001F Remove and install gearshift system 16.6.10.pdf
– MODEL 000.001 with TRANSMISSIONS 712.618 /619
– G26.60-3163-01 G26.60-3164-01 G26.60-3165-01
– 1 Unscrew safety bolt (1) Heat up transmission housing previously
– at the safety bolt (1) using a heat gun.
– push towards transmission housing as far as the stop. Tap the shift lever with a plastic mallet until the cover springs out.
– 3 Remove bolts (4) Heat up transmission housing previously
– at the bolts (4) using a heat gun.
– (3) and on transmission housing and coat with sealing compound.Fix the shift finger to the shift shaft with fixing plate (5).
– When the shift finger is fixed in position in the
AR26.60-I-0001A Remove install gearshift system 24.9.99.pdf
– TRANSMISSION 712.351 in MODEL 397, 684
– 1 Bolt
– 6 Transmission housing
– 7 Gearshift lever8 Stop plate
– from transmission housing (6) using a suitable of centering pins (10) in transmission housing
– bar magnet. (6).
AR26.60-I-0001B Remove install gearshift system 19.6.00.pdf
– TRANSMISSION 712.353 in MODEL 684
– außer ZF S5-42
– 5 Spacer plate6 Transmission housing
– 7 Gearshift lever
– from transmission housing (6) using a suitable of centering pins (10) in transmission housing
– bar magnet. (6).
AR26.60-I-0001C Remove install gearshift system 19.6.00.pdf
– TRANSMISSION 712.353 in MODEL 684
– ZF S5-42
– 8 Push spring9 Transmission
– W26.60-0003-11
AR26.60-W-0001L Remove and install gearshift system 3.11.10.pdf
– TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
– Shown on transmission 715.060
– 1 Screw
AR26.60-W-7000D Remove install hydraulic gear shift cylinder 16.6.10.pdf
– TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
– 1 Screwdriving
AR26.60-W-7100D Remove install hydraulic gate cylinder 16.6.10.pdf
– TRANSMISSION 712.63, 715.060 with CODE (GS3) “Hydraulic” gearshift
– 1 Hydraulic lines
– transmission housing
– 2 Detach hydraulic lines (1) from gate shift Collect fluid which runs out. Seal hydraulic
AR26.60-W-7200A Bleeding air from hydraulic-pneumatic shift-control mechanism HPS 16.1.06.pdf
– TRANSMISSION 712.6, 715.0 in MODEL 950, 952, 954
– with CODE (GS3) “Hydraulic” gearshift
– TRANSMISSION 715.3 in MODEL 950, 952, 953, 954
– TRANSMISSION 715.5 in MODEL 950, 952, 953, 954, 930, 932, 933, 934
– Transmission 712.63, 715.060 Transmission 715.5 Transmission 715.320
– 1 Bleed screw 3 Bleed screw 6 Gear shift cylinder
AR26.60-W-7200B Bleeding air from hydraulic-pneumatic shift-control mechanism HPS 16.7.10.pdf
– TRANSMISSION 712.630 in MODEL 950.5, 952.5, 954.5
– with CODE (GS3) “Hydraulic” gearshift
– TRANSMISSION 715.060 in MODEL 950.5 /6, 952.5, 954.5
– TRANSMISSION 715.5 in MODEL 940.###, 942.###, 943.###, 944.### 2#
– TRANSMISSION 715.5 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5
WF58.50-N-2640-01A Flat steel part for supporting countershaft Transmission 712.63.pdf
– WF58.50-N-2640-01A Flat steel part for supporting countershaft Transmission 712.63
– Fabricate support out of steel St37 acc. to drawing.
WF58.50-N-2640-02A Spacer for support plate Transmission 712.63 715.060.pdf
– WF58.50-N-2640-02A Spacer for support plate Transmission 712.63, 715.060
– Manufacture spacer from steel rod St37 Ø 30 mm.
WF58.50-N-2660-05A Fixing plate for shift shaft Transmission 712.618 619 639.pdf
– WF58.50-N-2660-05A Fixing plate for shift shaft Transmission 712.618/619/639
– Shop-make fixing plate in dimensions shown.